Help Linux-shops support Arch

Searching around the net for cool merchandise I found a few that had Arch-stuff, but with the old logo.
In my oppinion we can't wait for them to find out for them selves that we have changed the logo of our distro.
They may or may not contribute to Arch Linux, but they do give Arch Linux lip-support and making potential users aware that we exist.
The thing to do is to make the shops aware that the logo has changed.
So this is a call for action: If you find a shop online or elsewhere that still has the old logo on their stuff, make them aware of the change (an give them a link to the download page), so that they can change the logo the next time they order from their suppliers.
I already done this myself for the Danish Linux-shop (linuxpusher.dk) that amongst other stuff sells notobook-stickers...
The owner responded today to my email saying he would see when he could get new notebook-stickers (with the new logo).
You might be suprised with the respond you get from the shops. And if they don't respond you have at least done what you could to help them and above all else to help Arch Linux.
It's not much, but in my book this still counts.
C

CBJ wrote:Anyway I don't see what your problem is, its one small email to send.
Well I don't restrain you from sending this email. If its such a small effort, we don't you do it yourself?
Dusty wrote:I agree with CBJ that they should be notified of outdated logos, just as shops that shell cds should be notified of outdated isos.
Agreed.
To explain my previous posts: I don't like the attitude of some of these shops. I once made a Arch Sticker for a german linux shop and bought some of these myself. I did most of the work except for creating the Arch Logo: Designing the sticker & spreading the word about it in the arch forum and IRC... I didn't even get some kind of discount for doing all that. It's not that I would've done this to earn money with Arch, I did it for fun. I wouldn't do it again because I wasn't satisfied with the quality of the stickers. But I don't blame the shop for it, I think my expectations were too high.
And I don't like this whole "someone should do this, its no big deal" mentality. If it is no big deal, go for it.
I'm sorry if I was a little harsh before.
Last edited by Sigi (2008-03-11 18:59:48)

Similar Messages

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

I had to restore all the files on my pc using carbonite. I reinstalled iTunes and was able to find my music with the help of Apple support. How do I find my podcasts?

This helped, I restored them, but when I go to iTunes they are not there. Is there another step?

I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

I have an airport extreme and am trying to extend the range of the wireless network with an airport express. I set it up with the help of apple support, both lights are green on both airports, but the range didn't change. What could be wrong?

I am trying to extend the range of my wireless network by adding an airport express to an airport extreme. I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house. What could be the problem? Does weather affect the wireless network??

So, on the Extreme you checked the box to "allow this network to be extened" ?
Correct?
And on the Express, you set it up to "Extend a wireless network" ?
Correct?
See this Apple article and see if you missed anything...
http://support.apple.com/kb/HT4145
To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
Set up: Components of an extended network
➊ Primary Wi-Fi base station (this is the base station connected directly to the Internet)
➋ Extended base station
Configuring a wireless extended network
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

I need help from Customer Support. Whatever this charge is on my credit card,

He recibido un cargo de su tienda, que curiosamente he visto que se han hecho muchos cargos a diferentes personas bajo el mismo copncepto y tienda.Favor acreditarme dicho monto porque no he comprado nada con ustedes y ni tengo idea donde está Minesota.Este es mi cargo. 23/07/15323343GEEKSQUAD RENE00015826 RICHFIELD UUSRD$1,428.010.00 Y veo en Internet que otros clientes han hecho reclamos del mismo concepto. Subject Author PostedGEEKSQUAD RENE00015826Care‎03-09-2015 06:30 PMGEEKSQUAD RENE00015826 Unknown ChargePriscillaQ‎12-29-2014 10:08 PMrandom 10 dollar charge from richfield MN to my ac...ChrisBurns‎07-01-2015 12:50 PMUnknown Geeksquad charge on my Credit CardHardingR‎12-01-2014 05:57 PMGeekSquad protection terms changed without being i... Lo que me hace pensar que algo anda muy mal en ese Best Buy. Como es posible que no hayan corregido e identificado quienes están detrás de este fraude que lleva años. I need help from Customer Support. Whatever this charge is on my credit card,jesmann‎10-05-2014 04:52 PM

Hola scj2000-
Muchas gracias por visitar nuestro foro en búsqueda de una explicación al cargo que recién apareció en tu tarjeta de crédito.
Entiendo su preocupación, ya que cualquier cargo extraño que aparece en un estado de cuenta puede ser alarmante. En este caso, el último cargo que puede recuperar usando el correo electrónico que usaste para registrarte al foro, refleja que se renovó un antivirus Kaspersky. Esta autorización nos diste cuando realizaste la compra de tu Lenovo, desde entonces se renueva automáticamente la licencia de antivirus.
Las otras publicaciones que has leído, indican lo mismo. Un cargo que se ha hecho a la tarjeta de crédito que se presentó durante la compra con la autorización del cliente.
Lamento mucho la confusión y espero esto aclare tu duda.
Atentamente,

How do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
For example:
At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
This may or may not assist you but, it hopefully explains how the issue may be happening.

I wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support

i wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support?

basically I’m doing a project were I wanted to find out if there are recent technology out that provides technical support for example they do it with remote access but is they any new ways that they can support us and just wanted to find out if icloud gives technical support then how?

What distro linux is supported from ORACLE RAC?

Hi,
what distro linux is supported from ORACLE RAC?
Debian, Red Hat Enterprise, Suse, CentOS?
Thank you.
AV

Which version of RAC?
Also, what kind of processors will you be using?
The easiest way to find out what you need is on the 'Certify' tab on Metalink. It can tell you exactly what you need to know with only a few clicks of the mouse.

Which linux will support oracle 10g1 and 10g2

which linux will support oracle 10g1 and 10g2

You can see the Oracle's Certification Matrix here<br>
<br>
Nicolas.

Development use -- Enterprise Linux Network Support License

I would like to buy for development (Quantity One) -- Enterprise Linux Network Support License for use on multiple VMware machines or pcs. The intent is to use this single license only on one machine at a time. Will registering multiple times with ULN be a problem? Any advice is appreciated…
Thanks

Hi,
You can register multiple times with ULN using single license.
Before registering new machine, you should delete the machine registered.
Regards
Zhichen

Help with linux webcam support in an AIR application!

Hello
I am running the 32-bit edition of Ubuntu 10.04.
I recently purchased an application through AIR - PartyBooth (www.partyboothapp.com)
It is written in Adobe AIR, and is a simple program to operate a photobooth. I have 3 different webcams:
1) Logitech Webcam Pro 9000
2) Logitech Quickcam Vision Pro
3) Microsoft LifeCam Cinema
All 3 of these cameras work in every linux webcam software (including skype). They are very well supported webcams in linux.
They do work in the Partybooth application, however, the resolution is locked at 240x240 - which is way too low of a resolution to take nice pictures with. (Again, these cameras all work at full HD resolution in every other linux application that I have ever tried)

Hi Jon,
Thanks for bringing this to our attention, the AIR team is aware of this issue on Ubuntu. And we are looking into this.

Linux server support

What kinds of Linux server shares can the WD TV Live see? I don't count Samba because it's pretending to be Window$ and it's more difficult to set up than most Linux servers. I'm currently using NFS but the TV Live will not play any videos that are subdirectories of my NFS share so I'm hoping there are other options. I'f it doesn't support it, please add support for SSHFS.

I don't have any solution, media library will require write access but I do have a few suggestions that might help first, some info on my set up which worksUbuntu 14.04.1 LTS Server Edition exports file/media/Drives/Mini/Comedy 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/Drama/Drama 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/Mini/Nature 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/Family/Family 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/Photos/Music 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/Scifi/Seasame 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/Photos/Photos 192.168.1.0/24(rw,no_root_squash,sync)
/media/Drives/TVSeries 192.168.1.0/24(rw,no_root_squash,sync)
/media/Aufs/Action 192.168.1.0/24(rw,no_root_squash,sync,fsid=20)
/media/Aufs/Cartoons 192.168.1.0/24(rw,no_root_squash,sync,fsid=10)and my file permissions again are-rwxrwxrwx don't know that any of the above will help, but there it is as for symlinksyour script will result in hard links that are invalid from the perspect of the WD because you're still using absolute pathsyou need to use relative path symlinks so single dot./ start the search in the current directorydouble dot../ start the search one directory up from current directory and -s for symbolic link the WD will use the following path to mount your nfs shares (again this is from the WD's perspective)/tmp/media/nfs/<IPaddressHere>/<sharenamehere> so let's start with an example that does not have permissions issuesexport both shares, with read/write access something like this/home/garrett/VideoTest/Videos2 192.168.1.0/24(rw,no_root_squash,sync)
/home/garrett/VideoTest/Videos1 192.168.1.0/24(rw,no_root_squash,sync)then restart your nfs servernext copy some testvideo.mp4 to Video2next cd to Video1next create relative symbolic link (while in the directory Video1) doln -s ../Video2/testvideo.mp4 ./testvideo.mp4this will create the symlink inside the Video1 folder using a relative path, which is valid from both the perspective of the server and the WD next and final step will be to play with the permissions, to find what works and what does not1. do you need to export both directories2. does your exports file need any special arguments to allow following symlinks3. what permissions worketc ... so then if we edit your script, note it's untested, but this might work to create the symlinksalso note the added -s, without it your script would have created hard links#!/bin/bash
SOURCEPATH="/home/garrett/VideoTest/Videos2/"
TARGETPATH="/home/garrett/VideoTest/Videos1/"
cd ${SOURCEPATH}
ls *mkv | while read LSRESULTS
do
cd ${TARGETPATH}
if [ ! -a "${LSRESULTS}" ]; then
ln -s "../Videos2/${LSRESULTS}" "./${LSRESULTS}"
fi
done
#END# ok, I've rambled on a bit, and probably forgot something, but hope this helps maybe another permissions idea to try, write access the directory, ie WD can write it's database and other new filesbut read only for the media, don't know if that will work, but it's worth a try

T440 series linux touchpad support

Hello, I own a t440p laptop. For work reasons i only use linux operating systems.I have been trying to set my touchpad to detect multi touch gestures. However until now I haven't been able to do so.I don't know how but three finger taps are detected, but drags are not. Is there any solution for this? I have been running arch linux (since I haven't been able to use it also under ubuntu 12.04) thank you in advance,please let me know if I can add any usefull information,Guilherme

Hello !I own an E540 so consider my response accordingly ;-)I use Ubuntu 14.04 LTS and I've tried this very same version on the T430 at work (live USB) .I had a lot of option solved by using this :https://launchpad.net/touchpad-indicatorMaybe you can use the code and compile it on your version of Linux and maybe it is already availlable for your platform.Hope this helps.

ISCSI volume lost, have the .img file but no access to data. Help please, WD support worthless!

Basically, I have a iSCSI target which I cannot access after re-installing windows because the CHAP "secret" I thought I knew was wrong. Although I was told there was no way to acess the .img file by WD, I was able to pull the image using an SSH connection to the EX2 from a hidden folder. So now I have that file stored locally. Of course it would just be too easy to be able to mount that file and I understand why that is. However, through research, I am seeing that it may in fact be possible some how. Can anyone please help me with the resources that I have? I have alot of info that I really do not want to lose and I dont have the funds to pay a data recovery company thousands of dollars like WD support suggested. Is the .img file encrypted or is it just a FS that windows wont recognize? Please help and I would really appreciate any info. Thank you.

if the iSCSI target is protected with a username and password. It would not do any good even with a linux tool to open it. Like WD tech support suggest to find a recovery company is all your best bet. If you still have access to your NAS, you should be able to change the iSCSI target to with CHAP enable to NONE. From your Windows try to access your iSCSI target again without a password. bda714 wrote:
After being told multiple times by WD support that there was nothing I could possibly do to access my LUN i have gotten to a point that I believe is close to where I am trying to be. Along the way, there were many times that the support tech's at WD had told me what was said to be rock solid information, was proven to be wrong. . . at this point I feel like I am better off on my own and hopefully with some help from the community. Basically, I have a iSCSI target which I cannot access after re-installing windows because the CHAP I thought I knew was wrong. Although I was told there was no way to acess the .img file by WD, I was able to pull the image using an SSH connection to the EX2. So now I have that file stored locally. Of course it would just be too easy to be able to mount that file and I understand why that is. However, through research, I am seeing that it may in fact be possible some how. Can anyone please help me with the resources that I have? I have alot of info that I really do not want to lose and I dont have the funds to pay a data recovery company thousands of dollars like WD support suggested. Is the .img file encrypted or is it just a FS that windows wont recognize? Please help and I would really appreciate any info. Thank you.

Help Linux-shops support Arch

Similar Messages

Maybe you are looking for