Help, lost charger in Ir

Hello, I have a Zen Touch 40g. that I bought back in 2005. I left the charger in Iraq by accident some time ago. Is there anything I can buy in a store or do I have to order it's Is there posibly any other chargers that will work because all the ones i seem to try that fit everything else under the sun wont fit.

Hi,
I am not sure where you are located but you can contact support in your respecti've region or your local retailer to check on the availability of this charger.
Link: http://us.creative.com/products/prod...ubcategory=749
Good luck

Similar Messages

  • Ipod Touch lost charge and won't turn on

    I bought an 4G ipod Touch last summer , a few weeks after the new version with the camera came out. Since then my ipod crashes on certain apps that take up alot of memory, but this happened to my friends so i ignore this problem.
    the real problem is that now my ipod is not being recognized when i plug it to my ipod dock or computer, i also tried using my sisters charger and it still didnt work. When i plug it onto a charging device, nothing happens, no charging sign or a sign saying that a device was plugged onto the computer or whattever i use. i tried to move the ipod around the dock to see if it would connect but it doesnt.
    now my ipod shut down from low charge and i can not charge it. i tried to restart it but it lost charge before i could do so.
    i need serious help!!
    if went to the store that i bought my ipod , would they replace the one i have now?
    * also, i think the problem is inside the input slot for charging becuase the outside it not damaged other than some small scratches.

    Hi Ilanila,
    I had a similar problem and I found that it was because I was not using the orignial cable that came with the device. I'd bought a cheaper cable as a backup and it didn't work well, though it did charge. I'd say take yor device back to store where you bought it or an Apple store and have them try it out with a cable made by Apple.
    Hope this helps :-)
    Kaylu

  • Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

    Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Is there a way to retrieve notes from notepad if the phone powered off lost charge) before I hit the done button?

    Is there a way to retrieve notes from notepad if the phone powered off lost charge) before I hit the done button?

    If the phone doesn't power on and isn't seen by the computer then you wouldn't be able to pull data off it with the USB connection to your computer.
    You could pursue data recovery if the notes are very valuable, but the cost can be similar to having data recovered from a failed computer drive(possibly prohibitively expensive).

  • Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Contact the developer of the app.
    Restore from your backup.

  • Help - lost motherboard, auto save saved older script, newer script actually with older date.

    Adobe story team:
    I had a best script to date, on an older hard drive and the motherboard failed on my HP tower.  The sony laptop has a more recent dated script, but not the one I want.  How do I replace an "older" date script, one that I want for a newer script.  I don't want the newer script, I want the older one that is on a "pulled" hard drive again, from a tower that failed.
    Do I save the older file on an offline, using a new ID, new password, forever changed or what can I do?
    I need a fairly quick response, timing is critical.  HP tower is the problem.
    drgm
    thanks

    You have it half right.  the issue is the HP tower I had failed.  The mother board failed, I pulled the hard drive which is windows 7, I have a sony laptop which is in 32 bit vista, I am not sure if the different versions will be an issue.  can i take a file off the pulled hard drive and put it somewhere in a directory even with the different windows vista vs windows 7 if so which file should i copy on the pulled hard drive and where do i put it on the laptop, directory plus I will go back on online save it in the clouds and reformat the laptop and go to windows 7 then go back to adobe story  and go from there. thank you for your quick attention in this matter.
    Respectfully,
    drgm
    doug morrow
    Date: Tue, 24 May 2011 22:10:24 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help - lost motherboard, auto save saved older script, newer script actually with older date.
    Hi
    I am not sure if I understand your problem correctly, but as far as I can make out you had been working on a script and then it got autosaved and now you wish to go back to the "older" script.
    In order to do so you may visit your document's history through the View->History option. There you will see older versions of your document (if you had not turned off autoversioning). You may then open an older version of the document from the panel by double clicking on it. Once on an older version you will get to see the "Make Latest" option. Clicking on that will make the "older" state of your document your "current" state and then you may proceed to edit the document as usual.
    I hope this is helpful to your situation. In case you face any issues in following the mentioned steps do let us know.
    Thanks
    Ali
    Adobe Story Team
    >

  • HT1459 iPod touch iPod touch lost in snow 2 mos, found yesterday songs played ok today charged fully but lost charge very quickly is there something I can do to try to fix before taking in for service?

    iPod touch
    iPod touch lost in snow 2 mos, found yesterday songs played ok today charged fully but lost charge very quickly. What can I do to try to fix this myself before sending it in for repair?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Please Help: Lost everything because of switch to ...

    Tuesday 8th July.  A week ago today I was switched to BT Infinity from ADSL with a non BT ISP. I had 2.5 years of bomb proof internet on ADSL. It didn’t ever go down or slow from 4-5Mbs. However I made the crazy decision to switch to Infinity for, ironically, a faster and more reliable service.
    Immediately after installation of my Fibre my connection speed went DOWN from 5Mbs on adsl to 0.5-1Mbs. It was immediately obvious to me something was wrong. I insisted the installation engineers stay and watch a speed check but they said this was “perfectly normal” for the settling in period.   Before they’d even left my drive way it crashed and continued to crash over the next 24 hours for up to several hours at a time. Speeds varied from 0.5 – 1.5Mbs.
    On Thursday 10th I took several hours off work and spent it on the phone to India where they eventually booked me an engineer to look at my line the next day. Someone from a UK call centre called me on Friday to say they’d attempted to remotely repair my line and it had failed and they’d need to send an engineer out.
    On Sunday 13th the BT Open Reach engineer arrived at 2.30pm (I’d cancelled a family day out to the annual village fete). He insisted on checking all the house wiring, despite me pointing out that the wiring was fine as the adsl had worked perfectly previously, I repeatedly pointed out it was a problem outside our home. He left in a hurry at 4 saying he’d return tomorrow.
    Monday 14th I had to take a day’s leave on Monday to await the OPen Reach engineer who was not the same guy as Sunday. He was pleasant and professional but again insisted on testing all my home lines and then spent all afternoon replacing the lot. He completely rewired the house, rerouting the phone lines into a new socket, drilling walls etc. His tests did not show any problems on the line at my house or at the cabinet. He called technical help whilst I was there who said they couldn’t detect any problems on the line. However the internet was still very very variable and I insisted he call back. This time they stated the “interleaving” was off on my download and switch it on (BT’s guidance says it is NOT an option to switch this off for fibre so why was it off?). This appeared to stabilise the internet at 18Mbs download and 7Mbs up with a long latency of 60-70 on the ping.
    Tuesday 15th Awoke and it was still working! I dared to hope. Too soon though. My wife has just called me on her mobile, very angry, we have now lost not only the internet but the phone too! The line is completely dead.
    I’ve reached the end of what I can cope with. I cannot take more time off work whilst engineers visit. I cannot even call and sit in a queue for hours to India as I have no phone (this was sent from my works Email). I work from home a lot and I’m in danger of losing my job because of a combination of time off and an inability to connect to the works network. This is wrecking my life.
    I live in the village of Great Eccleston, Lancashire and know there were issues with “the cabinet” a few months ago from the BT engineers who visited and that engineers were working on the lines in our street yesterday as damp had got into the junction (but this ended at lunch yesterday and my phone was still working).
    I have repeatedly requested this is resolved externally, that I’m given a “lift and shift” in the cabinet to a new circuit, but was told yesterday BT wholesale were reluctant to do this. Each time I call the call centre I have to explain everything again to a new person, same when an engineer visits. When the engineers visit they insist they will sort it but make it worse. There is no continuity at all. All I can think to do now is Email the CEO of BT.
    I have to go home now but will check this tomorrow.

    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
      High Low High Low    
    FTTC Range A (Clean)
    50.7
    35.2
    12.4
    7.8
    Available
    FTTC Range B (Impacted)
    43.6
    23.9
    12.4
    6.1
    Available
    ADSL Max
    Up to 5.5
    4.5 to 6.5
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    Available
     The line and internet are still dead.
    For all ADSL and WBC Fibre to the Cabinet (FTTC) services, the stable line rate will be determined during the first 10 days of service usage.
    For FTTC Ranges A and B, the term "Clean" relates to a line which is free from any wiring issues (e.g. Bridge Taps) and/or Copper line conditions, and the term "Impacted" relates to a line which may have wiring issues (e.g. Bridge Taps) and/or Copper line conditions.
    Throughput/download speeds will be less than line rates and can be affected by a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.
    The Stop Sale date for Datastream is from 30-Jun-2012; the Formal Retirement date for Datastream is from 30-Jun-2014.
    If the End User wishes to migrate from their current Broadband supplier they will need to contact them in the first instance to obtain a MAC (Migrations Authorisation) Code, and then contact their new Broadband supplier to arrange for the service to be migrated.
    Note: If you decide to place an order for a WBC fibre product, an appointment may be required for an engineer to visit the end user's premises to supply the service.
    Please note that postcode and address check results are indicative only. Most accurate results can be obtained from a telephone number check.
    Thank you for your interest.

  • Help, lost all the songs on my iPod when checked the box titled "Replace all items when Autofilling" in my Autofill Settings window.

    Help, I lost all the songs on my iPod when I deleted a few songs from my iTunes Library, checked the box titled "Replace all items when Autofilling" in my Autofill Settings window, and then tried to Autofill. Note that I do not purchase songs from iTunes, but rather I rip songs off my own cd's and then transfer the mp3 files to iTunes.  And after I transfer mp3 files from my pc to iTunes and then Autofill, I generally delete those files from my pc.
    I can still see the songs in my iTunes Library, but not on my iPod.  Is there a way that I can salvage them and get them back on my iPod?
    Thanks in advance.

    Well you will have to wait to connect you ipod to the orignal computer and it will put all your songs back on to it.

  • On the 3rd day, my battery became FIRE HOT and LOST CHARGE QUICKLY

    First, I LOVE my iPhone 4, it's amazing, but I did want to at least share what happened to me this week. My iPhone 4 battery started going from 100% charge to 40% in 90-minutes - It was only in standby mode. The phone became VERY HOT, especially around the steel edges. I called Apple Care and they said "Do not use the phone because it could be hazardous" and advised I go to an Apple store. I did, and they exchanged it after verifying it wasn't safe. Apple has the best customer care on Earth. While I was there, someone else was there exchanging their phone for the same reason - They have a secret stash in the back packaged in unmarked small black boxes, just for this reason. Anyway, the phone rep at Apple confirmed to me that there is a battery issue with the new phones. They guy at the Apple store who helped me said he has seen few issues for signal or the yellow screen, but a lot of hot batteries that do not hold a charge.

    That's really interesting, my iPhones battery is horrendous, I've just finished reassuring it, powering it back up to see whether I can improve the situation (looses 26% charge in standby at night when I slept for 7 hours. My first comment to my friend was, the iPhone 4 was amazing, but was very warm. Will be interesting to see if my problems over with this reset, or if I too have a battery problem. Thanks for sharing.

  • Lost charger for HP 625 delphi d40

    I lost my charger for my HP 625 Delphi D40 - I cant find any information on this laptop and cant find anywhere that sells this charger.
    Its quite fustrating as I have all my important stuff on tis laptop and cant power it up can you tell e where to buy one of these?
    Thanks in advance

    Hi,
    Please use your country/region to search for its part # from the following link:
       http://partsurfer.hp.com/
    You can buy from there or use part # to buy elsewhere such as eBay.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help - lost icons in finder window

    Hi, Somehow i lost some icons, and i can't get them back. When I click on the HD icon, i get the finder window. Listed are: network, MacHD - a line, then: Desktop, User Icon, Applications, Pictures, and Favorites. I almost positive I also had a Music and Utilities icon in there. Last night i had some problems with my mouse and several times heard and saw the famous "cloud" and "swoosh disappear sound". After, I had fewer icons in the finder. Can someone verify the icons that should be there, and how do I get them back?
    Thanks...

    Here is what Mac Help has to say about sidebar items:
    To customize the list of basic sidebar items, choose Finder > Preferences and click Sidebar. Select the checkbox next to items you want to show.
    To add a personal item, drag it to the lower part of the sidebar. You cannot add items to the upper section.
    To remove an item, drag its icon out of the sidebar.
    Drag items up or down in the sidebar to organize them.
    To change the width of the sidebar, drag the divider bar beside it. You can show just the icons or hide it completely.
    To eject a disk or disconnect from a volume, click the eject icon next to the item in the upper part of the sidebar.
    So, you should be able to drag items of your choice into the sidebar.
    EMAC G4 1.0 GHz   Mac OS X (10.4.6)  

  • Help - Lost Administrator Password: Recovery Desktop Frozen

    I have an early 2009 24" iMac running 10.7.4.  I have Find my Mac active and have somehow lost my administrator password.
    I have seen other questions and answers.  I cannot log out to reset the password.  Command + R takes me to the recovery desktop.  Track pad and arrow keys allow me to navigate around the recovery screen but I am unable to select Utlilities>Terminal.  In fact I cannot select any of the other options e.g. re-install Lion etc.
    Getting desparate, so please, can anyone help?
    AH54

    Thank you.  It has taken me months to get used to the light touch associated with gestures.  Nice to know that a heavy hand can still be required!!!

  • HELP Strange charging symbol, ipod will not go

    I have 30GB ipod, only one month old. It was going ok. But today the screen froze then when I plugged it into the PC it displayed a strange battery charge symbol. It is a battery with a lightening bolt covering the left end. The symbol has a black outline with a black bar on the left end under the lightening bolt. itunes will not recognize the ipod. Plus it also flashes the unhappy face symbol approx every minute. I tried resetting it but it did not fix it. Please help.
    30GB 5th Gen.   Windows XP  

    Is the icon the one in here? "iPod: About the battery charge status icon" http://docs.info.apple.com/article.html?artnum=60970
    There is a link within the article that might help with your your iPod not being recognised: http://docs.info.apple.com/article.html?artnum=61711

  • Help, lost all photos and texts while syncing new iphone

    While syncing my husbands new iphone 3 on itunes I gained all the music but lost all photos and texts... also all the apps and contacts from my iphone were added to his phone. Need help mostly on how to recover the photos that were deleted, there were about 1,000 of them and I didn't realize it was happening until it was too late....

    Where did the photos come from in the first place?
    You computer?
    His computer?

Maybe you are looking for

  • Core Dump : Need Help

    Hi, I am porting the code to Forte 6.0 on Solaris 8.0. I am compiling the code using : -library=rwtools7,iostream options. While executing I get core dump. Following is the dbx description of the code. detected a multithreaded program t@1 (l@1) termi

  • Itunes "Your request is temporarily unable to be processed."

    I'm trying to set up my apple ID. I made it setting up Imessage but now I'm trying to set up my Itunes account. I answer all the questions and put in the required information and when i hit submit it says "Your request is temporarily unable to be pro

  • Need more information on Remote Intradoc Client (RIDC)

    Hi guys, First, let me say it is a real pleasure to try to understand your framework and other extensions you have created (sarcasm). How many pdf will I have to open before to find a good explanation... Ok enough said, it is not related to the subje

  • Server monitor : my turn

    Like other people, i would like to manage my xserve remotely (like the advertisement promise). === configuration : * xserve 1.1 * os server 10.4.10 (8R2218b) * LOM Revision 1.2.7 * only one ethernet port used, * in the etc/hostconfig, the hostname is

  • How do i connect my printer to photoshop elements 13?

    When i first installed photoshop everything was fine but for some reason its telling me that i have to connect my printer to the program. How do i do that? I have a wireless printer.