HELP! LOST DRIVER DI

*crying* No! I've lost my driver disc. Creative Labs, being the jerks that they are, won't let me talk to a real person. Here I am with a 8Gb Microphoto and no drivers. My computer woj't recognize it and there's no place to get the drivers from! I don't give a **bleep** about the firmware! I don't care about all the other stuff they have for download! I WANT THE DRIVERS SO I CAN LISTEN TO MUSIC! IS THAT SO HARD!
WHY DOES CREATIVE HAVE TO BE JERKS! If I can't get the drivers I'm throwing out my (much lauded by Creative) Zen, buying a Microsoft Zune, and telling everyone I know to boycott Creative Labs. This whole company is a hunk of garbage. They can't release one good MP3 player! Judging by the forums here, no one that has bought a Creative MP3 product has been satisfied in the least!

There actually are no drivers for the Microphoto because the Microphoto is a Microsoft PlaysForSure compliant device. All such devices use Microsoft's driver which is built into Windows XP SP and higher. If you are experiencing driver problems, you'll need to contact Microsoft or at least try the standard troubleshooting for your problem found in our Knowledge Base.
Dale

Similar Messages

  • Help - lost motherboard, auto save saved older script, newer script actually with older date.

    Adobe story team:
    I had a best script to date, on an older hard drive and the motherboard failed on my HP tower.  The sony laptop has a more recent dated script, but not the one I want.  How do I replace an "older" date script, one that I want for a newer script.  I don't want the newer script, I want the older one that is on a "pulled" hard drive again, from a tower that failed.
    Do I save the older file on an offline, using a new ID, new password, forever changed or what can I do?
    I need a fairly quick response, timing is critical.  HP tower is the problem.
    drgm
    thanks

    You have it half right.  the issue is the HP tower I had failed.  The mother board failed, I pulled the hard drive which is windows 7, I have a sony laptop which is in 32 bit vista, I am not sure if the different versions will be an issue.  can i take a file off the pulled hard drive and put it somewhere in a directory even with the different windows vista vs windows 7 if so which file should i copy on the pulled hard drive and where do i put it on the laptop, directory plus I will go back on online save it in the clouds and reformat the laptop and go to windows 7 then go back to adobe story  and go from there. thank you for your quick attention in this matter.
    Respectfully,
    drgm
    doug morrow
    Date: Tue, 24 May 2011 22:10:24 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help - lost motherboard, auto save saved older script, newer script actually with older date.
    Hi
    I am not sure if I understand your problem correctly, but as far as I can make out you had been working on a script and then it got autosaved and now you wish to go back to the "older" script.
    In order to do so you may visit your document's history through the View->History option. There you will see older versions of your document (if you had not turned off autoversioning). You may then open an older version of the document from the panel by double clicking on it. Once on an older version you will get to see the "Make Latest" option. Clicking on that will make the "older" state of your document your "current" state and then you may proceed to edit the document as usual.
    I hope this is helpful to your situation. In case you face any issues in following the mentioned steps do let us know.
    Thanks
    Ali
    Adobe Story Team
    >

  • Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

    Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Contact the developer of the app.
    Restore from your backup.

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • I lost driver for Lacie d2 8x burner

    Hi. I originally had my Lacie external burner attached to my G4. It's been a while. Now, I can't find the disk that came with my Lacie. I want to hook it up to my Macbook Pro. The driver was bundled with Toast 6 or 7. I can't find the driver download from Lacie.com. I tried contacting the company but they're closed for the holidays. I need it to burn multiple copies of "disk images" that I saved using iDVD.
    Is my Lacie d2 external burner even compatible to my MacbookPro?
    Do you know where I can download the driver?
    Thank you in advance.
    Macbook Pro Mac OS X (10.4.11) Using iLife 08

    Strange. Both of my burner/s work fine w/o any additional drivers. But then again I built my own.
    Click Here
    Leave it to Lacie to fit these same drivers into their own burners ....
    One would think that Mac OS X built in drivers would suffice
    You may want to try these sites for additional help:
    http://driver-pro.com/related/english/hardware-drivers/?gclid=COmMnoaQ7pcCFRsRag odRAO_DQ&hit=1&adurl=12234
    http://www.apple.com/downloads/macosx/drivers/lacieupdatetool.html
    Hope the above links help but if not just come on back.
    Good luck.
    Message was edited by: SDMacuser

  • How to switch iphone 5 to new pc for backup and sync. lost drive on old pc.

    How to switch iphone 5 to new pc for backup and sync without losing anythinng. Lost drive on old pc.

    Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.
    Connect iPhone.
    Sync.

  • Help, lost favourites and can't sync with external hard drive

    I transferred my itunes to a lacie external drive because my ibook disc was full. I've changed my advanced preferences but my ipod won't sync with it and all my playlists have disappeared. Thanks in advance for help.

    It could be the cable or the drive may have failed. Plug in another external HD and see if that works OK, if it does then that points the finger at the EHD.
    Roger

  • Help Lost hard drive

    I recently lost my hard drive with Itunes and all my songs. Luckily, I have them on my ipod nano. Now for the million dollar question. How do I get them back to my new hard drive. I have downloaded Itunes and when I plug my nano in it displays the songs loaded on the nano but I cannot seem to get them into the library. I have followed a mulititude of instructions from apple but none seem to work.. Anyone have any suggestions. Thanks, Kelly

    You can try MacMuse's solution, or if you prefer an automated program, try Yamipod or one of the many similar programs mentioned in several places on this forum.
    You should really have searched the forums before posting, as this question has been asked and answered several times.
    Tom

  • Please Help: Lost everything because of switch to ...

    Tuesday 8th July.  A week ago today I was switched to BT Infinity from ADSL with a non BT ISP. I had 2.5 years of bomb proof internet on ADSL. It didn’t ever go down or slow from 4-5Mbs. However I made the crazy decision to switch to Infinity for, ironically, a faster and more reliable service.
    Immediately after installation of my Fibre my connection speed went DOWN from 5Mbs on adsl to 0.5-1Mbs. It was immediately obvious to me something was wrong. I insisted the installation engineers stay and watch a speed check but they said this was “perfectly normal” for the settling in period.   Before they’d even left my drive way it crashed and continued to crash over the next 24 hours for up to several hours at a time. Speeds varied from 0.5 – 1.5Mbs.
    On Thursday 10th I took several hours off work and spent it on the phone to India where they eventually booked me an engineer to look at my line the next day. Someone from a UK call centre called me on Friday to say they’d attempted to remotely repair my line and it had failed and they’d need to send an engineer out.
    On Sunday 13th the BT Open Reach engineer arrived at 2.30pm (I’d cancelled a family day out to the annual village fete). He insisted on checking all the house wiring, despite me pointing out that the wiring was fine as the adsl had worked perfectly previously, I repeatedly pointed out it was a problem outside our home. He left in a hurry at 4 saying he’d return tomorrow.
    Monday 14th I had to take a day’s leave on Monday to await the OPen Reach engineer who was not the same guy as Sunday. He was pleasant and professional but again insisted on testing all my home lines and then spent all afternoon replacing the lot. He completely rewired the house, rerouting the phone lines into a new socket, drilling walls etc. His tests did not show any problems on the line at my house or at the cabinet. He called technical help whilst I was there who said they couldn’t detect any problems on the line. However the internet was still very very variable and I insisted he call back. This time they stated the “interleaving” was off on my download and switch it on (BT’s guidance says it is NOT an option to switch this off for fibre so why was it off?). This appeared to stabilise the internet at 18Mbs download and 7Mbs up with a long latency of 60-70 on the ping.
    Tuesday 15th Awoke and it was still working! I dared to hope. Too soon though. My wife has just called me on her mobile, very angry, we have now lost not only the internet but the phone too! The line is completely dead.
    I’ve reached the end of what I can cope with. I cannot take more time off work whilst engineers visit. I cannot even call and sit in a queue for hours to India as I have no phone (this was sent from my works Email). I work from home a lot and I’m in danger of losing my job because of a combination of time off and an inability to connect to the works network. This is wrecking my life.
    I live in the village of Great Eccleston, Lancashire and know there were issues with “the cabinet” a few months ago from the BT engineers who visited and that engineers were working on the lines in our street yesterday as damp had got into the junction (but this ended at lunch yesterday and my phone was still working).
    I have repeatedly requested this is resolved externally, that I’m given a “lift and shift” in the cabinet to a new circuit, but was told yesterday BT wholesale were reluctant to do this. Each time I call the call centre I have to explain everything again to a new person, same when an engineer visits. When the engineers visit they insist they will sort it but make it worse. There is no continuity at all. All I can think to do now is Email the CEO of BT.
    I have to go home now but will check this tomorrow.

    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
      High Low High Low    
    FTTC Range A (Clean)
    50.7
    35.2
    12.4
    7.8
    Available
    FTTC Range B (Impacted)
    43.6
    23.9
    12.4
    6.1
    Available
    ADSL Max
    Up to 5.5
    4.5 to 6.5
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    Available
     The line and internet are still dead.
    For all ADSL and WBC Fibre to the Cabinet (FTTC) services, the stable line rate will be determined during the first 10 days of service usage.
    For FTTC Ranges A and B, the term "Clean" relates to a line which is free from any wiring issues (e.g. Bridge Taps) and/or Copper line conditions, and the term "Impacted" relates to a line which may have wiring issues (e.g. Bridge Taps) and/or Copper line conditions.
    Throughput/download speeds will be less than line rates and can be affected by a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.
    The Stop Sale date for Datastream is from 30-Jun-2012; the Formal Retirement date for Datastream is from 30-Jun-2014.
    If the End User wishes to migrate from their current Broadband supplier they will need to contact them in the first instance to obtain a MAC (Migrations Authorisation) Code, and then contact their new Broadband supplier to arrange for the service to be migrated.
    Note: If you decide to place an order for a WBC fibre product, an appointment may be required for an engineer to visit the end user's premises to supply the service.
    Please note that postcode and address check results are indicative only. Most accurate results can be obtained from a telephone number check.
    Thank you for your interest.

  • [Help]ask drives for ms-6351

    I have a pc with mircro-star board, model ms-6351 in my company, it was shipped from our hk office. but now, we have lost all information about it. I can only find its audio driver is AD1881A. who can help me and tell me its drivers for video and network, thank you very much!

    http://www.msi.com.tw/program/products/slim_pc/slm/pro_slm_detail.php?UID=66
    that has board with same number in it drivers link over on left

  • Help Lost Address Book

    I have been using the back up process for the Blackberry Cureve 8310 before but have made a mess up of the downloading of the new addresses and now cant find them!  Quite important as over 416 addresses!
    I wonder if anyone has any suggestions on where I can get these back and down loaded from the computer back on to the blackberrry!
    As you can imagine this is doing serious damage to my business as now some may be lost for ever!!
    Any help - thoughts on what to do!
    By the way Blackberry Office applications is dead over the weekend and Bank Holiday when I really needed them! 
    Is there any other help line anyone knows of in UK?  0871 200 3198 was the one I was given by O2 provider!
    Thanks
    Rosie
    Message Edited by KaLin on 08-31-2009 10:46 AM

    Hi there!
    Since you have been using the backup process (good job!!), you should have backup files on your PC. Search the entire hard drive for files with an ipd extension (*.ipd). Inspect the results (date/time of the file, mainly) to see what might be your best to use. Then, launch DTM and use it to initiate the restore process, setting it to use as the source the ipd file that you selected above.
    KB10339 How to restore data from a backup file to the BlackBerry smartphone
    As for help line numbers, I've no information on that.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Really need help - Lost All iTunes Files!  I don't want to lose everything!

    I moved recently and when I replugged my computer, all my iTunes songs were lost. I still have the songs on my ipod mini and I'm not daring to plug it in. I really want to restore my files.
    I figure that I need to do this as if I got a new computer and re-install it. However, I am told that ipods are a one way stream from computer to ipod only and not vice versa. I'm hoping someone can help me because I have bought songs that will be lost too. If I didn't have the purchased songs, I wouldn't mind re-importing all 86 CDs of mine (although it would be a pain).
    Please help me ASAP. My CD collection is growing fast and I have a very long bus ride.
    Thanks.
      Windows XP  
      Windows XP  

    Perhaps you may still have the music files on your PC -- but not seen in iTunes or the PC.
    Do a thorough search of your PC using the tips below:
    First - Make sure that you enable your Windows Explorer to view 'Hidden' files:
    - Open Windows Explorer
    - Select 'My Computer'
    - On the main Windows Explorer menu: Tools=>Folder Options=>'View' tab
    - In 'Advanced Setting' --> Files and Folders --> Hidden files and folders:
    -- Select 'Show hidden files and folders’
    - Click 'Apply to All Folders'
    - Click 'OK'
    Then check using Windows Explorer in 'My Music\iTunes\iTunes Music\...' for folders containing your music (or wherever you keep your music folders).
    Also check in your Recycle Bin to see if you accidentally deleted it. If so, ‘Restore’ it back to it’s original spot.
    Then try running a search using Windows Explorer (or similar) for files with the extensions of: m4a, m4p, MP3, OR with the partial names of the songs you are missing.
    Do all the above before you decide that your music files have been completely erased from your hard drive.
    If you can locate the music files/folders, we can get iTunes to recognize it. Try one of these:
    If you have a backup iTunes database file available....
    1. --- Close iTunes. If you have a backup (or previous version) of the ‘iTunes Library’itl’ database file, then place a copy of that file in the ‘...\My Music\iTunes’ folder (or wherever the current, incomplete file resides).
    If no backup ITL file exists….
    2a. --- In iTunes choose: Edit==>Preferences==>Advanced tab. Select 'Change' and browse to the music folder in your PC drive (if it isn’t already). Click OK to save that setting.
    Then....
    2b. --- In iTunes choose: File==>’Add Folder to Library’ & browse to the music folder in your PC drive. Click OK.
    Without the ITL file, re-‘Adding’ the music files to the Library will lose you the Ratings, Play Counts, Date Added and Last Played attributes, as well as your Playlists. No real way to recover them if you haven’t made prior backups. Something to consider for the future....
    If your music files are truly gone, and you have some or all of your music files on your iPod, these links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring playlists, ratings, playcounts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software
    PodUtil Software
    XPlay (Software For Cross-Platform Functionality & Music Recovery)
    XPlay Photo Browser (For recovering Photos)
    After recovering your song files, strongly consider developing a thorough backup strategy for just this type of situation.
    You need at least three sets of your music:
    -- One full set on the PC within iTunes (on internal HD or ExHD)
    -- One full set on an separate external backup medium (CD/DVD/ExHD/other)
    -- One (full or partial) set on the iPod
    Music files on just the iPod and the computer is not considered having any backup. If you cannot store your complete music files on the computer, then create and maintain two external sets.
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a backup strategy: http://discussions.apple.com/click.jspa?searchID=394618&messageID=1263275

  • T60 1951 WAT LOST DRIVER

    I seem to have lost(?) the driver of a USB device in re-loading windows XP. My research tells me it's possibly to run a sierra wireless mini-card. Where can i download it........this the last of about fifteen lost in the process of this escapade..........can anybody help on my first visit to this happy bunch of Lenovo Lovers......Thanks in advance!

    Sounds like you might be missing the WAN adapter driver. 
    Try this page (if you're in the UK I'm assuming you have the Vodafone device):
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-64321

  • T61p lost driver for display card

    Hi,
    My OS is XP and I found that driver for display card has lost twice. One symptom is that when I scroll my browser or a word document, the screen flickers badly.
    It won't work properly if I simply reinstall the driver. I uninstalled anything containing "nVidia" from Control Panel and reinstalled the driver, it will work properly again.
    My ordered OS is Vista Home Basic, and I changed to XP. The driver I'm using is downloaded from lenovo's website.
    Anyone knows why?
    Best Regards,
    enrico

    Are you installing the drive from the device manager or from the actual nvidia installer?  Try doing both - and also remember to install the LCD monitor driver, which helps correct issues that may arise.
    T61_Wide | Model No. 7662 - CTO
    Core 2 Duo T7250 | 2GB OCZ DDR2-800
    82566MM Gigabit | 4965AGN Centrino Pro

Maybe you are looking for