Help! Lost Installation CD for PD1030.

Help! Lost Installation CD for Creative WebcamPro PD1030. Can someone help me to get a replacement CD ? Thanks

Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem.
Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
If your iPod shows up in Explorer under 'my computer' try changing the drive letter: Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management. Right-Click on the iPod and select “change drive letter”. Choose something further along in the alphabet that is unused. Usually, “M”, “N”, “O”, or something similar.
If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
Also try this (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
Also See:
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes</A

Similar Messages

  • Lost installation disc for

    I lost my installation disc for my Zen. I also am using a new computer so I don't have anything loaded but the drivers. Downloaded the drivers but where can I download Creative Media source? all the downloads talk of upgrading to newer vrsions. How do I get the basic one loaded so that I can load the advanced / newer ones?
    Please help as I am lost in a sea of confusion!!!
    Thanks
    Chopper

    Hi can you help me. I am not up on technical stuff. My brother has just upgraded his ZEN EXTRA 40gb and given his old one to me yes youv'e guess it he has lost the disc. I am not quite sure what the difference is between updates, and drivers, and an instalation disc. I am worried that I will lose all the music on?it if i download?and install the wrong thing. Please can you help me but please remember that I am not very? good with technical things so please make it easy to understand many thanks.
    CHAPPERS:smileysurprised:?

  • Lost installation disc for Wireless-G WRT54GC

    Hi there,
    Apparently I lost my installation disk for my Wireless-G WRT54GC router and I checked out the downloads section to see if the contents of the installation disc were offered and apparently it wasn't. I'm planning to reformat my computer and might need the software to set it up and I was wondering if there's an available download link for it.
    thanks a lot.

    You can use the EasyLink Connect software, at Linksys.com > Support > Technical Support > EasyLink Home.
    Message Edited by toomanydonuts on 04-19-200704:02 AM

  • Help with installation problems for PE 12; error while installing Shared Technologies. Suggestions?

    Help. I've tried to install PE12 multiple times without success due to shared technology installation failure. The install gets right to the end and then fails when trying to launch and uninstalls. Per the help suggestions, I downloaded the ASA, which identified no problems.
    Very frustrating.
    Any suggestions for someone who is not too tech savvy?
    Thanks.

    In Windows what has always worked for me is ending any already running PSE/PRE processes from previous or current versions - look for anything with 'Elements' in the name, and 'dynamiclinkmanager.exe'. Then I run the setup program by right-clicking and selecting 'Run as Administrator'. This runs the setup program with even higher privileges than a user account with Administrator privileges.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Lost installation CD for WPS 11 Ver 3 - Download ??

    I have an old Linksys WPS 11 Ver 3 that has been out of service for over a year.
    Want to reinstall it on a new computer but can't find the installation CD.
    I only see the driver on line...
    Can I download the installation program?
    Thanks for any help.

    Try this link to download drivers for WPC11....

  • Lost installation CDs for 2 ZS Platinum

    Hi,
    I moved and lost all my installation CD's for 2 ZS Platinum Pro.
    Soundblaster site has only updated drivers...
    How can I order replacement CD's ?
    Can a friendly user send me a copy of all CD's ? I will pay for costs.
    Thanks,
    Vince

    I called your direct sales dept : They have only the Soundblaster installation CD's...
    NOT the 3rd party application software !!
    I need these following CD's:
    - Steinberg Cubasis? VST 4.0 Creative Edition + Wavelab Lite 2.0
    - Image Line FL Studio 4 Creative Edition
    - SoundFont Sample Banks
    Can you or anyone just send me a copy ?
    I will pay for your costs.
    Thanks,
    Vince
    [email protected]

  • Lost Installation CD for WRT54G version 5

    Hi,
    I have been using Linksys wireless router WRT54G V 5. I decided to change Internet service provider last week. It used to be starhub maxonline (cable modem) now I changed plan and use singtel broadband( ADSL modem)
    My way of connection is this. From cable modem to wireless router. And Wireless Router direct out to a PC via ethernet cable. And I have a laptop in another room which is on the internet wireless.  In short, 2 terminal. One direct terminal and One wireless terminal.
    When I disconnect the old modem(Cable) from the router and connect with the new modem(ADSL),  it is not working.  Even the direct terminal is not working.
    Why is this so? There is nothing wrong with the ADSL modem as I plug it in directly, it is working.
    I believe I need the installation CD? If so, where can I download this? I have lost it.
    Please reply to my message. Thanks alot
    Can reply through my email at [email protected] or reply here too.
    Thanks!

    Well, not quite. But you have posted the bit of information which reveals a little bit about the modem: your modem is not a simple modem but also a router. It runs on 192.168.1.254 and has a DHCP server. Now your Linksys router uses the same IP address subnet 192.168.1.* for its own LAN. A router which is connected to the identical subnet on the internet/WAN side and the LAN side cannot work because it cannot route. It never knows where to send a packet for 192.168.1.*.
    O.K. The quick solution is: wire a computer to a numbered LAN port of the router. Do not connect the modem to the router. Open http://192.168.1.1/ no username required, default password is "admin". On the setup tab change the LAN IP address of the router from 192.168.1.1 to 192.168.2.1. Save the settings. The router will reboot and the computer will loose the connection. That's O.K.
    Wire the internet port of the Linksys to the modem. Reboot the computer. The computer should now have an IP address like 192.168.2.100 in ipconfig. You can open the router configuration at http://192.168.2.1/
    Internet should work now.
    What you did then, you have chained two routers. The Linksys LAN uses 192.168.2.*. The modem/router LAN uses 192.168.1.*.
    There are certain disadvantages of this setup. It may slow the connection down a little as everything goes an additional hop. You cannot use some functions on the Linksys like DDNS as those require a direct connection of the Linksys to the internet (which is not the case, the modem/router has the internet connection and shares it with the Linksys). Other things like port forwarding (for online games or similar) get more complicated because you have two routers in chain on which you have to configure the port forwarding.
    I would rather recommend either of these two options:
    1. Put the modem/router into "bridge" mode. In bridge mode you turn off the whole router part. Now the Linksys is able to access your ISP directly. You'll probably have to configure your Linksys for PPPoE (you can currently see what you need in the modem/router) with username and password.
    2. Set up the WRT as access point only. Then the modem/router is your internet gateway router. All internet functions have to be configured on the modem/router only. To set up the WRT as access point see here.
    And: don't forget to secure your router! see here.

  • LOST installation CD For Sony Handycam DCR HC42

    Hello Everyone,
    Sony won't let you download the installation CD!!! You have to buy it for $70!!! And, all the freeware available is for Windows. I was wondering if you guys had any aolutions b/c my computer isn't recognizing the handycam!
    Thanks

    Hotinthedesert,
    How are you connecting the camera to your computer? If you're using the USB cable that came with the camera, that's your problem.
    You need a 4-6 pin FireWire cable (Sony calls FireWire iLink). Any store that sells computer accessories should have them. No need to buy a Sony branded cable.
    You don't need any drivers or any of the software that Sony has to offer.
    Matt

  • Lost installation disks for Macbook Pro OS X 10.6.8 (2.3GHz Intel Core i7 SSD

    Hi there
    I've recently moved to Berlin and of course left my installation disks in my home country. I have a corrupt HD and need to do some disk repair.
    What are my options? I do not have Apple Care, and there is no Apple Store in Berlin (weirdly).
    Thanks in advance!

    They won't have replacement discs, but they may have a copy of Snow Leopard they can install on your computer. If they don't then you would have to purchase one from Apple directly:
    If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

  • Urgent help on installation ECC for forms

    Hi ,
    I am in new a cutomer site on upgrade to ECC. I have the functionality of Interactive forms to be incorpoarated Can I ask them for WAS ABAP stack alone or should I have both ABAP and Java Stack ..
    Regards
    Abhilash

    Hello,
    you will absolutelly need a JAVA stack to use Adobe Forms. It can be a double stack installation, or a stand alone JAVA installation of the same release connected to the ABAP.
    Best regards,
    Dezso Pap

  • Lost installation discs for CS4

    Hi,
         We have our license number to CS4 but can;t find the disc(s). Is there a way we can buy or download the disc(s) without having to buy the suite again?
    Thank you
    Jose Pastrana
    Viejas Enterprises

    Hi Jose, on our site (see profile) we have links to the original trials for several versions on Adobe's servers.  Hope this helps solve your problem.

  • Lost installation disc for PowerBook G4

    I've inherited a PowerBook G4 operating OS X but whilst I have the deceased's log-in name, I don't have the password or installation disk to reset the password. Is there any way I can get to use the machine?

    Here's one method to reset the password without the install disc:
    1. boot computer and hold the "apple/command" key and the "s" key.
    2. wait for terminal show
    3. release keys
    4. type without the quotes: "/sbin/mount -uaw"
    5. press enter
    6. type without the quotes: "rm /var/db/.applesetupdone
    7. press enter
    8. type without the quotes: "reboot"
    9. press enter
    This will let you create a new admin account when you reboot your computer.
    Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
    http://www.macobserver.com/tip/2003/06/16.1.shtml
    Here is another way to get around not knowing the admin password on Macs.
    To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
       1. Reboot
       2. Hold apple + s down after you hear the chime.
       3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
              * mount -uw /
              * rm /var/db/.AppleSetupDone
              * shutdown -h now
       4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
     Cheers, Tom

  • Lost installation disc for OS 10.4 (Tiger). Can I get a replacement?

    Should I try to replace this disc (how?)...or is it better to purchase Leopard and upgrade. I have old AppleWorks documents and do not know if they will run on Leopard.

    Welcome to Apple Discussions!
    I can confirm that Appleworks 6.2.9 works reliably with Leopard, but doesn't come with Leopard. Also the Leopard installer disc does not include any portion of iLife except iTunes and does not include any of the games that shipped with your Mac except Chess, and does not include the hardware test that shipped with your Mac. For those reasons, I'd definitely consider asking AppleCare for the original installer discs. Also none of those applications come with Tiger retail either except Chess.
    Message was edited by: a brody

  • Lost Installation Disk for PE 12

    I was having some problems with my Adobe Premiere Elements 12 so I decided to try reinstalling. Unfortunately, I forgot to make sure I had the installation disk before uninstalling. I have the code that comes with the program, but I don't have the installation disk. Is there a way for me to get the program fro somewhere else, like online or something?
    Other details:
    I am using a 64-bit Windows 8 OS

    Zeifly
    Please consider the following web site which has worked for many for the purpose you describe.
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    You download the Premiere Elements 12 tryout and then insert your purchased serial number during
    the installation process.
    The key to success is to read and carry out carefully the web site's "Note: Very Important Instructions"
    in order to avoid an Access Denied message.
    Please let us know if that works for you. Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Help.  I lost my installation CD for my for my new AirPort Extreme 802.11n

    Need help. I lost my installation CD for my for my new AirPort Extreme (802.11n). How can I download the new Admin Utility?

    Hi Gr8Tucano,
    Currently the Airport Utility does not appear to be on the downloads page, you can call Apple support line to receive a replacement disk, but be aware there may be a charge for replacement CDs.
    Regards,
    John

Maybe you are looking for