Help - lost motherboard, auto save saved older script, newer script actually with older date.

Adobe story team:
I had a best script to date, on an older hard drive and the motherboard failed on my HP tower.  The sony laptop has a more recent dated script, but not the one I want.  How do I replace an "older" date script, one that I want for a newer script.  I don't want the newer script, I want the older one that is on a "pulled" hard drive again, from a tower that failed.
Do I save the older file on an offline, using a new ID, new password, forever changed or what can I do?
I need a fairly quick response, timing is critical.  HP tower is the problem.
drgm
thanks

You have it half right.  the issue is the HP tower I had failed.  The mother board failed, I pulled the hard drive which is windows 7, I have a sony laptop which is in 32 bit vista, I am not sure if the different versions will be an issue.  can i take a file off the pulled hard drive and put it somewhere in a directory even with the different windows vista vs windows 7 if so which file should i copy on the pulled hard drive and where do i put it on the laptop, directory plus I will go back on online save it in the clouds and reformat the laptop and go to windows 7 then go back to adobe story  and go from there. thank you for your quick attention in this matter.
Respectfully,
drgm
doug morrow
Date: Tue, 24 May 2011 22:10:24 -0600
From: [email protected]
To: [email protected]
Subject: Help - lost motherboard, auto save saved older script, newer script actually with older date.
Hi
I am not sure if I understand your problem correctly, but as far as I can make out you had been working on a script and then it got autosaved and now you wish to go back to the "older" script.
In order to do so you may visit your document's history through the View->History option. There you will see older versions of your document (if you had not turned off autoversioning). You may then open an older version of the document from the panel by double clicking on it. Once on an older version you will get to see the "Make Latest" option. Clicking on that will make the "older" state of your document your "current" state and then you may proceed to edit the document as usual.
I hope this is helpful to your situation. In case you face any issues in following the mentioned steps do let us know.
Thanks
Ali
Adobe Story Team
>

Similar Messages

  • Help needed for Auto-save functionality on appraisal bsp (HAP_DOCUMENT)..

    BSP -> HAP_DOCUMENT.
    I browsed through some threads and found out the code for this, but wanted to know which page/controller method I should write in my code. This functionality is required in both Manager page and in Employee page.. Could someone help me on this, it would be very helpful...

    hi ,
    the probelm with adobe (pdf) only(.i.e. pdf attachments are damaged or something) so, check the below links to get more info regrding above error...
    http://www.computing.net/answers/windows-xp/pdf-error-acrobat-could-not-open/118542.html
    http://forum.planetpdf.com/wb/default.asp?action=9&fid=6&read=62004
    http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=6911
    thnx
    suriya

  • Help, lost all photos and texts while syncing new iphone

    While syncing my husbands new iphone 3 on itunes I gained all the music but lost all photos and texts... also all the apps and contacts from my iphone were added to his phone. Need help mostly on how to recover the photos that were deleted, there were about 1,000 of them and I didn't realize it was happening until it was too late....

    Where did the photos come from in the first place?
    You computer?
    His computer?

  • New iPod Chargers with older generation iPods

    Hi,
    I have an older generation iPod (20GB, no click wheel) and recently lost my charger (one that had a firewire port on the charger itself).
    I went bought a new USB iPod charger and when I connect a USB cable with docking port to the charger and iPod (respectively), my iPod does not charge.
    Any ideas anyone?
    Thanks!

    If you have a 3rd gen iPod (the one with 4 buttons underneath the screen), then it does not charge via USB only firewire.
    You need to get the charger exchanged.
    Check here for confirmation on which iPod you have..
    http://docs.info.apple.com/article.html?artnum=60971

  • Using new i-pod with older i-book

    I just purchased a 3G I-pod and I am trying to load it up with music. My older i-book will only hold about 900 songs. What are my options here? Can I increase the memory on my i-book? Is it possible to load songs onto my i-pod from another computer without losing the songs that are already on there?
    Please help!

    You'll need to set up the iPod to manually update.
    With the iPod connected, open iTunes.
    Select Edit-->Preferences
    Choose iPod
    Select "manually manage songs and playlists"
    Storing the only copy of your music on your iPod is definitely NOT a very secure thing. A common fix for iPod issues is to Restore, which erases all data on the iPod.
    You should consider picking up an external drive for the iBook.
    In answer to your other question, yes, you can load music from another computer, but you will need to have the iPod in Manual Update mode.

  • New iTunes syncing with older click wheel iPod

    I have an older 20 GB 1st gen. click wheel iPod. I'm wondering if I will have syncing problems upgrading to iTunes 10.2.2. Has anyone done this without problem? Please let me know.

    Can I use the new versions of iTunes on an old iPod
    Yes. I have iTunes 9.0.x working just fine with an iPod that's a generation older than yours.

  • HOW DO I SAVE APPLICATIONS INSTALILNG A NEW HARD DRIVE WITH NEW OS?

    I recently purchased a used G5 that is loaded with programs. I am getting signs that the hard drive is getting ready to crash. I installed a 1TB hard drive and formatted it. What I want to do is install leopard on the TB hard drive but still transfer all the applications and programs over from the old HD. A lot of the programs I don't have serial codes for. Can I do a new OS instilation on TB HD with new users and everything and still transfer all the programs over that I don't have serials for and them work perfectly without entering in new serials.

    No. Either ask the original seller for the discs, manuals, and serial numbers, and ensure they destroy their copies of the data, or purchase your own license for the software that they did not supply on disc and/or legitimate license code. The license to the software is limited to whomever has the software in hand with its codes. Purchasing Leopard will only entitle you to the contents of Leopard. Leopard retail on its own does not include iLife, except for iTunes, though Apple does have a Mac Box Set which includes iLife and iWork. The original discs that came with the Mac still have a hardware test which you can't get other than by requesting them from the original seller.

  • Charging new i-Touch with older AC adapter

    I recently purchased a new Touch and wondered if I could use the AC-usb adapter that came with my 2nd gen (old school) iPod to allow my plugging the Touch into the wall instead of always into the computer. Since both iPods use usb cables, will there be any problems with using the same wall adapter and changing cables accordingly?

    The Apple charger should work, however there are known 3rd party examples that do not. For example, I had a Sonnet AC-to-USB charger that worked on my iPod 5Gen Video, but failed on my IPT 1stGen, which Sonnet admitted to, and subsequently re-engineered their product.
    I now use a newer Apple charger and the same cable for both iPods.

  • How to open newer version file with older version software?

    Recently I downgraded my mac due to Maverick failed to support gdb(I really hate that lldb stuff). And it turned out that the file I used to edit in newer version of mac failed to open. It says I need to update my software to newer version. The thing is, I really don't want to use Maverick now until it resupport gdb. So are there any other ways to open those files?

    HI,
    The UnRarX application should be accessible from your Dock after installing the software. The application icon looks like this:
    "How to extract a rar archive?"
    1. Launch UnRarX.
    2. Drag rar archive into the UnRarX window.
    3. Extraction begins automatically.
    Carolyn

  • Is new pages compatible with older version

    Is the new version of Pages compatible with the last version?

    Yes, you can. Click here and follow the instructions.
    (103568)

  • When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help!

    When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help! - Chip

    This is a mean one. I don't have time to try and find the cause, but at least some answers to your questions, to hopefully shed some more light on this.
    Where was the original destination? iCloud folder.
    On another drive? Tried to Save as... to Hard Drive (also changing name of file), always get the same non-descript short Error "Couldn't auto-save document." (slides down from top with a yellow warning triangle). Status to the right of document name is "Not Saved".
    Another Server? No access at this time.
    I also tried File, Revert to, Browse all versions, to check what I'd be losing. Saw I wasn't losing much and selected the last version and pressed Restore - same error. In the end I just quit Pages and re-opened. The document opened with the last few edits missing (but with the status "Edited" next to the name). I re-edited and could save. Good old habit of saving often.

  • ABAP Workbench Auto-Save

    Greetings to all.  I have been searching on the workbench and SAP's help for an auto-save feature when programming on the workbench.  You see, I sometimes forget to save my work, as I did last night, and got bounced off the system by the network gurus, and lost my work.  I know to save and save often, but forgot.  Anywho, does any know if UCC 6.0/NetWeaver 7 has any such programming auto-save feature?  Or, is there a system setting that works for everyone?  Thank you for your time and help.

    Hello Ernie Laboy ,
                                   There is no auto-save functionality in SAP(even in latest EHP5).
    Thanks,
    Greetson

  • Human Task worklist cannot auto save when submitting a Task Action

    Hi
    We are using SOA 10.1.3.1. In BPM worklist, if user doesn’t click the “save” button to save all the modified changes, all the modified records in the custom task form cannot store back to BPEL variables.
    1.Is there any ways to auto save all the modified info during the Task Action Submission (e.g. on choosing the APPROVAL outcome -> help user to auto save the records)?
    2.Or any ways to force user to click "Save" before clicking the "Approval" on Task Action?
    Any suggestion is highly appreciated.
    Thanks.

    Resolved by disabling pop-up blocking in IE8.

  • Want to upgrade to Mountain Lion, but CS6 questions about Auto-Save need answers...

    Hi,
    I'm on Mountain Lion for all my "non-critical" work, but I'm still running the latest Snow Leopard on my main desktop machine, running CS6 Design & Web Premium. I've avoided the switch primarily because of the auto-save feature that Apple placed into ML. I haven't found a satisfactory answer anywhere on the web to this basic question...is auto-save a problem, as Apple implements it, with CS6 and working on images?
    In particular: 1. I work on very larger files, 4GB+ in size regularly, and I don't wan't the peformance hits associated with constant saving, 2. I make changes to images, downsizing them, croping, color corrections, etc. so that I can make jpg proofs for clients or myself. These are more "intermediary" images and not intended to be saved. I don't want to downsample an image, flatten it to creat a jpg for proof and have it overwrite the original image layered, high res by mistake. Does this happen with photoshop, or does Adobe avoid the auto-save that Apple uses?
    I have all the latest iOS gadgets and it's becoming quite cumbersome managing multiple sets of iCloud info, etc. without being on ML. I'd like to make the switch, but at the cost of losing work, etc. Can someone with experience on ML & CS6 give me any input in the matter? And, does this also apply to all the other Adobe apps in CS6? I'm constantly making minor changes and edits that I usually "undo" out of and don't want saved.
    Thanks.
    Craig

    So, in other words, photoshops behavior works the same, using save as..., etc. as it did under Snow Leopard? I should expect the auto-save behavior that occurs in apps like iPhone, etc., where i can actually lose the original because of the constant backups, etc.?
    Thanks.

  • Auto-save and file-recovery

    Dear Adobe,
    It is the year 2015. Just lost several hours of work in Illustrator. Thanks for making your professional community the beta tester of your half-baked products. I have no interest using Illustrator if you release version after version with new "features" and leave out the most important thing: file recovery and auto save. Honestly, I am in severe disbelief that this is not built in. Don't release an update if you don't do this first. This has happened far too much for me to have any patience, or just to say, "it's ok, I will re-do it".
    I can't find words to express my severe disappointment in this software. I am not the first one to have said this. If no solution is in the works even, you really don't care.
    Sincerely disappointed and frustrated,
    A Creative Cloud User

    spybraek,
    Only an old native here.
    With regard to autosaving, you may consider these (I am aware that you may know (of) them):
    CS5/CS6/CC & Vista/7/8 or 10.7+
    http://www.astutegraphics.com/software/autosaviour/
    https://forums.adobe.com/message/6616027#6616027
    For Mac users with CS6 or CC, the app "Ai Auto Save" can be bought here:
    https://itunes.apple.com/us/app/ai-auto-save/id877602617?ls=1&mt=12
    With regard to file recovery, the following may apply (this may also be (too well) known to you):
    One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
    Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    http://www.illustrator.fixtoolbox.com/
    As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

Maybe you are looking for

  • Unable to install the downloaded camera raw for PSE10 on Mac

    At first, I wasn't able to open .nef files from my Nikon D800E. I then realized that I needed to update my camera raw installers. The available versions were 6.5, 6.6, and 6.7 from the adobe website. I also downloaded the Adobe App Manager as it was

  • How can I get an evaluation copy of WLE?

    Hi there: I have this question for a long time, that is how can I get an evaluation copy of WLE? Any suggestions or ideas appreciated. [email protected]

  • BTE 1640 for FBL1N

    Hello All, I have used BTE 1640 to display some text at the header of  tcode FBL1N. I have appended the text lines in table T_LINES and the text is displayed correcly on the vendor display header at the top. But when I do sorting of the line items th

  • Script Works in Formcalc but not Javascript

    I have two radio button lists laid out in two columns to select garment sizes (small, medium, large). The "M" side is MEN and the "W" side is WOMEN.  The Radio button lists are named MENS and WOMEN respectively. ITEM    QTY.       COST       ITEM   

  • Import material Process For DEPOT Plant

    Hi,           I know the process of import procurement in  for manufacturing plant,  like   first we are doing  PO  then MIRO for delivery cost conditions i.e for custom conditions then J1IEX PART 1,   GR  ,  J1IEX PART 2  then MIRO for vendor,    i