Help! Lost working project link from P CS4 to AE CS4--files missing

Bear with my ineptness. I am trying to solve a Dynamic Linking to AE Prob. Something has gone south, no doubt do to my stupidity.
I had a project with ten Ntsc DV AVI clips in a sequence in CS4, and I used the "replace with comp from AE" feature to color correct each one in succession in AE. All went well. Corrections showed up as they should on the Premier timeline--looked great. No problems.
Then, and this may be the mistake, got a call from a client who needed an asset pronto. Shut down both Premiere and AE, saving the projects. Never done that before with a linked project!
Came back started both back up. AE said 10 files were missing since the last save--colorbars instead! Nothing had been touched or moved. In Premiere, no messages, just ten clips with colorbars!
Did I blow this project by shutting down Premiere and AE?
Can I salvage it anyway?
Much thanks in advance.

Thanks,
I read about your struggles in a search. My problem is a bit different since these were just segments of one single clip cut up in Premiere, and each segment was color corrected in AE.
I think I blew it by closing AE and Premiere before rendering each of the segments and saving each as a separate clip.
Next time I will know better. By the way, I have had no problem doing this and saving the corrected segments before shutting down.

Similar Messages

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

Help doesnt work, url links do nothing

I have windows 8.1.
When in thunderbird I press F1 and nothing happens.
Same with clicking on the Release Notes or Help Contents.
The same thing happens when I click on a link to a URL in a recieved email.
I have reviewed all the help on the net and none change anything.
I am using Firefox and it is set as my default browser.

OK I found the problem.
Here is the solution suggestedin https://support.mozilla.org/en-US/kb/hyperlinks-in-messages-not-working
''Check that no application is specified for the HTTP content type
In Thunderbird you can specify an action that occurs when you click on various types of attachments and inline content. If the action for the HTTP / HTTPS content type is set incorrectly, this will prevent links from opening correctly.
If the operating system's default browser is specified correctly as described above, it is not necessary to specify an action for the HTTP / HTTPS content type. To check this setting, select Tools | Options (Windows) or Thunderbird | Preferences (Mac and Linux). Click on the Attachments page. If HTTP and/or HTTPS are listed in the Content Type column, either delete the action or ensure the specified action is correct. ''
Even with it set to Firefox (Default) it does not work.
If you reset it to ask then when you say '''Use Firefox''' & click the box to '''Remeber... ''' box it will work and remember it. The option looks the same in the Thunderbird / Options / Attachments / Incoming but it behaves differently. (gotta love greedy microsoft, wanting Internet Explorer as default so they can track everything you do )
Also deleting the entries for http & Https also works as well as deleting the whole mimeTypes.rdf file.
Cannot really say whether the problem lies within the mimetypes.rdf layout I have or the way Windows 8.1 handles permissions (which seem to be a bit odd with a strange "Account Unknown" created when Firefox is installed).

Need help setting up DB Link from my Oracle 11g XE to SQL Server.

Hi,
I'm trying to create a DB Link from my Oracle 11g Express Edition in a Windows XP machine to an SQL Server. Here are the steps I've done so far.
1. Created and setup an ODBC Connection for the SQL Server DB. Named it SQLSERVER. Windows Authenticated.
2. Modified listener.ora. See below.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = SQLSERVER)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)3. Modified tnsnames.ora. See below.
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSERVER =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT=1521))
    (CONNECT_DATA =
      (SID = SQLSERVER)
(HS = OK)
)4. Copied C:\oraclexe\app\oracle\product\11.2.0\server\hs\admin\initdg4odbc.ora to C:\oraclexe\app\oracle\product\11.2.0\server\hs\admin\initSQLSERVER.ora and modified it. See below.
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = SQLSERVER
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>5. Restarted listener.
C:\>lsnrctl stop
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2012 11:33
:51
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2012 11:33
:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\ad
min\listener.ora
Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\PHAILORTD000012\list
ener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date                18-SEP-2012 11:33:57
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\PHAILORTD000012\li
stener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLSERVER" has 1 instance(s).
Instance "SQLSERVER", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully6. Created database link using the following command.
create database link sqlserver using 'SQLSERVER';7. Test using
select * from "dbo.mytable"@sqlserver;
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
select * from dbo.mytable@sqlserver;
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
select * from mytable@sqlserver;
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVERI followed the steps provided in this link but not sure where I went wrong. Can someone help me.
http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm
Thanks,
Allen

Here's more information on the machines.
Machine where the Oracle Database 11g Express Edition: IP Address is 10.162.128.67
Machine where the SQL Server database: IP Address is 142.120.51.30.
I've modified the tnsnames.ora to the following:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.162.128.67)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSERVER =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 142.120.51.30)(PORT=1433))
    (CONNECT_DATA =
      (SID = SQLSERVER)
(HS = OK)
)But now I'm getting the following error:
C:\>tnsping sqlserver
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2
012 14:52:59
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 142.120.51.30)(PORT=1434))) (CONNECT_DATA = (SID = SQLSERVER)) (HS = OK)
TNS-12541: TNS:no listener
C:\>Regards,
Allen

How to keep links from being broken when moved or file is later split

Which is the best way to make sure that a link to another pdf file is not broken when a file is emailed or moved to a new location off of the server? Should you link a destination or use the hyperlink feature?
If the links are created and the file then has to be split, will the links be retained in the split files?

PDF moved —
PDF#1 has a link to PDF#2. To keep this link functional after putting PDF#1 elsewhere:
--| Relocate PDF#2 with PDF#1; maintaining the same path to the target of the link (which is PDF#2).
--| Or, use Acroat's link tool to modify the link in PDF#1 so that you establish a functional path to wherever PDF#2 is at.
For email, if PDF#1 & PDF#2 are adjacent to one another under some folder/directory & then linked you'd want to email both files together. Both PDFs can be saved &, provided they stay adjacent, the links will work.
PDF split —
PDF#3 has internal links (e.g., a link from PDF page 1 to some other PDF page in PDF#3).
You split PDF#3 by extracting the first 5 PDF pages & now have PDF#4.
Any links in PDF#4, to PDF#3 pages past page 5 will not function.
Use Acrobat's Link tool to modify the link such that it goes from PDF#4 to the desired page in PDF#4.
n.b., There are 3rd party plug-ins for Acrobat that can facilitate bookmark and link management.
A web search will provide a listing.
Be well...

Can't get motion Tween to work - just upgraded from a previous version to CS4

I am attempting to create a motion tween between two keyframes. The image is the same...the first keyframe has the image set to an alpha of 0 and the second keyframe some 20 frames down the timeline is set to an alpha of 100%. The keyframes are on the same layer. The image has been transformed to a symbol. Yet when I double click between the two keyframes and create the motion tween so the image will fade from 0 to full view at 100% nothing happens. I don't see the familiar arrow that normally indicates a motion tween between the two keyframes. I've created this transformation a thousand times before but don't understand what is different in CS4 that isn't creating the tween. When I double click on a frame in between the two keyframes it indicates I can remove motion tween so, it makes me believe the motion tweening has been set but, it isn't.
I am quite frustrated and don't understand if I haven't set something in the preferences so the tweening will work or just what is going on.
Help!

And here's the article that was written specifically to update your skills with all the changes between the earlier tweening and new tweens in CS4:
http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html

DHTML hotspots don't work when linked from Framemaker

I'm using Adobes Technical Communication Suite 4 on a 30-day trial to determine how well it will work for single-source publishing. I'm familiar with Robohelp (having used it for over a year) but have had almost no experience with Framemaker (and none with version 11, which is part of the suite).
Until now, we've been writing in Word and importing files into Robohelp. We use the Dynamic HTML features of Robohelp to create drop-down and expanding text (usually to provide the definition of a term). Word doesn't provide a way to create them, so it has to be done in Robohelp after import. However, with Framemaker, I should be able to create these features in FM have them appear in a linked RH file. There is a Framemaker menu to support their creation.
But when I attempt to do this, it doesn't work. The " text caption" (that the user clicks on to see the expanded or drop-down text) imports correctly into RH, but the expansion does not work. When clicking on the caption text in the HTML preview, the only thing that happens is that a single space appears where the drop-down text should be. The drop-down text itself remains invisible. (But I know it's there because I can find it in the HTML source code view.)
I am probably doing something wrong when I set this up in FM. Here is my procedure.
First, I type the text that will be clickable by the user to elicit the drop-down (this is what I presume Adode means by "text caption"). Then, in a new paragraph, I type the text that is intended to be displayed in the drop-down.
The instructions (for drop-down text) in the help say:
"Select the text or paragraph on which you want to place the drop-down text caption. "
So I select the "text caption" text.
"Select Adobe RoboHelp > Dynamic HTML Effects > Drop Down Caption"
I select that menu choice.
"Select the text that should appear as drop-down text in your online help page."
I select the next paragraph, which contains the drop-down text.
"Select Adobe RoboHelp > Dynamic HTML Effects > Drop Down Body"
I select that menu choice.
I save the file and then switch to Robohelp and update the linked file.
The "text caption" then appears in the RH file, but the drop-down text does not appear (except in the HTML source code).
What am I doing wrong?

Problem solved, through experimentation.
For the benefit of those who may experience this problem in the future: the secret is that there must be exactly one return (i.e. one press of the Enter key) between the "text caption" and the "drop-down text".
If the text caption and drop-down text are on the same line, it doesn't work (the coding for the text caption is disrupted) and if there is anything besides a return between them, it doesn't work (the drop-down text is not displayed).

Browser "back" button won't work when linked from Catalyst graphic

I am using Flash Catalyst in (CS5 Design Premium) because I am much more a print than web designer so bear with me.
I created a .swf file in FC, and placed it at the top of a "router index" page. I linked 10 "buttons" in the .swf, each to a different anchor on the "router index" page. Clicking on each "button" jumps to the correct anchor, so far so good.
The problem is, when I hit the browser "BACK BUTTON" in IE only (Safari and Firefox work fine), it does not jump back to the top of the "router index" page. It jumps back to a previously opened page (homepage or another page), instead of back to the FC .swf graphic on the "router index".
FC apparently only allows linking to "absolute" URL's, not "relative" URL's, (so my links to the anchors are "absolute"). I don't know if this is the source of the problem with IE. I have always linked to anchors previously in Dreamweaver using "relative" URL's, and have never encountered this problem.
I looked over the files that FC creates and cannot find one that I understand, or shows an editable file path that I can change.
I hope i don't have to buy Flash Builder. Right now I have Design Premium. And... I don't understand Actionscript.

Hi azaral
Take a look at Project > Quiz Manager... > Quiz
Settings tab. My guess is that you have DE-selected the "Allow
backward movement" check box.
Cheers... Rick

Help: 'lost' emails after upgrade from 10.3

I just completed an upgrade to 10.4.6, and every thing seems to be working, however about a months worth of my latest email don't seem to be imported properly into the inbox in mail.
When you click on the message you get "The message from So and So <[email protected]> concerning “RE: Happy New Year!” has not been downloaded from the server. You need to take this account online in order to download it." But all my accounts are on line.
When I search for the message Spotlight finds it, and I can then move it to inbox - where it then shows as another copy, but one that works. While this is a workable solution, I have to do it for every email so I'd like a better fix.
Emails before about Dec 12 don't seem to be effected.
Any Ideas? .. thanks.

Try using Disk Utility to repair disk permissions, then open Mail.app and pull down the mail menu and use the syncronize item, then try the rebuild item. This should resolve the problem.

Problem opening a link from webpage to a access db file on a network share

Hi all,
We have a webpage where there are links to the different ressources on our network..
one of these links points to the i:\somefolder\someDB.accdp or whatever extionsen access databases have..
so the idea is that the user goes to the webpage click on the link and because the I: drive on the pc points in the right place it opens the file in access.
this works. IE download manager pops up and asks what to do, open - save - save as
the users says open and access opens the DB for the user.
The problem is that IE download manager says the file was not downloaded and the access database windows does not take focus.
now this may seem like a small thing but we do get allot of support from users saying its not working. The problem here being that users don't see the blinking access icon in the process bar and thinks that clicking the link didn't work.
I assume the reason access doesn't pop into focus after choosing to open it from IE link is because IE sees the file as not downloaded and than nothing happens.
I have no clue why this happens (IE says the file was not downloaded or why access doesn't take focus after choosing open)
I have been at it for days..
I have put the site in the trusted site option which did nothing to solve the issue.
Turned off mime sniffer and screenfilter or what ever the filter in IE is called and i still got the issue
this is IE 11
ANY!... and i mean A N Y ideas would be priciated!
Sincerly
Casper

Hi,
Is this problem just occures to part of users? Is these computer installed any security software? If that it is, try to disable them for test.
It would be better to disable the AV software, then restart the computer to test the problem again if it appears.
If no use, in my opinion, it would be better to use network Monitor to capture the web access trace when clicking the link.
This could help us have a deep insight about this problem.
If there is any difficult, please feel free let us know.
Roger Lu
TechNet Community Support

When I try to access an active link from a website (usually a pdf file), the new tab opens and is labeled correctly; the word "done" appears at the bottom; but the page does not open or download. The same problem does not occur with Chrome.

Example: on the home page of the website http://www.dot.ri.gov
there is an active link entitled "Overview of all Iway changes - Fall 2010"
Clicking on it exposes the following url:
http://www.dot.ri.gov/documents/iway/Iway_Changes_Fall2010.pdf
However, the tab remains blank, even though it says "Done" in the bottom left corner.
When I use Google Chrome as a browser, I have no problem opening that url.
This has occurred numerous times over the past several days on several different sites--and usually the link that will not open is a pdf file.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Extract work order data from r/3 system in flat file(csv)and export to BI

Hi,
I am new in interface.
I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
Please provide the step-by-step proces to do this.
Thanks
Suchi
Moderator message: anything else? please work yourself first on your requirement.
Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael

My published calendar is blank when I click the link from the email. What am I missing?

I have published my calendar and sent an email with the info, but when I click on the link the calendar is blank.
Any ideas so that my husband can see my calendar at his work computer?

The problem with add-ons is, most work together without causing the user
too much trouble. But once in a while, someone discovers a problem. And its
hard to trace down because, as it turns out, two or more add-ons cause the
problem. That is why one of the first things a user can do is to
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''.
If the problem is gone that tells us something. If the problem is still there,
that tells us something else.<BR><BR>
If you ever have a problem, and you think an add-on is the cause, the best
thing to do is to start disabling the add-ons one by one or five by five until
the problem is gone.

InDesign CS4 packages multiple copies of links from book

I use the Book feature to package the 20-some-odd newspaper ads we create weekly at our in-house art dept for a grocery chain. These ads consist of placed JPEGs of products surrounded by supporting copy and prices. Each ad is a different size and sometimes the products vary from ad to ad, but most use links common to eachother.
The trouble I'm having with ID CS4 is that when I package the book containing all these ads, each common link is copied separately for each ad into the Links folder. For example: File.jpg, File_1.jpg, File_2.jpg, etc.
I've experienced this in CS3 only when the links have had the same file name but were linked from different paths. In CS4, even when the .indd files are all linking to the same files with the same paths, extra copies are created.
I've found it tedious to use the Finder to delete all the extra copies and then re-link everything in InDesign.
Is this a bug or am I missing some setting somewhere?
Thanks,
Amanda

I recreated this problem using a single PSD file that I placed in a 6 page Book file. I found that when you resize the image and/or re-crop the picture box, the book package with create copies of the image.
So, my vote is that this is a bug too.

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

Help! Lost working project link from P CS4 to AE CS4--files missing

Similar Messages

Maybe you are looking for