Help! Lumia 800 doesn't charge after turning off

The battery of my Lumia 800 was empty, so it turned off.
I plugged in the USB-Cable and nothing happens.
I even can't turn on the phone by using the power button.
Does anyone have an idea?
The USB-Cable worked earlyer the day
Solved!
Go to Solution.

ok, puh, i fixed it:
I hold down the power button, the lower volume key and the kamera key for a few seconds, then i released the power button.
The device booted and i plugged in the usb fast
I read this in a german board, this key kombination is for a hard reset - but fortunally all my settings are still there

Similar Messages

The browser doesn't start after turning off and turning on the computer

The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you

My BB Playbook doesn't charge and turn on. Nothing can solve this problem. Please help!!!!

Hi everybody!
My BB playbook doesn't charge and turn on.
When I tried to charge it, at first ,the red color appears for 10 seconds and after the green color starts blinking several times. And that's all. Every time when I am charging it the same thing is repeating. What should I do in this case???
If someone knows how to solve this issue please HELP!

Hey LM344,
Welcome to the BlackBerry Support Community Forums.
If you're receiving the flashing green LED light, it sounds like the BlackBerry PlayBook battery is completely drained. I suggest plugged the BlackBerry PlayBook into the wall charger for several hours to get a charge again.
Let me know if the issue still persists after charging it after several hours.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

My phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !

MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !

Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many simply will not read such posts.
Enter & Exit iPhone Recovery Mode

Notebook showing network activity after turned off

Hi, after turn off my notebook HP Probook 4540s with connected ethernet cable and power source, the RJ-45 connector on my notebook still indicates(LED shines) like there is a network transmission in progress. If I disconnects ethernet cable, indication stops. When I reconnect it back, it starts indicating agian. I thought it was by bios settings something like boot on lan, but it doesn't seem so. Is it common for RJ-45 port to indicates even when is computer turned off? Also I have d-link router, maybe is it a d-link setting?
How to disable network indication when is computer turned off?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
http://h30499.www3.hp.com/hpeb/
HP ProBook 4540s Notebook PC Support
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Efax 7510 still won't work after turning off/on ePrint several times

I'm trying to send an eFax over and over after turning off and on the ePrint button under the webservices menu but without any success. The message keeps stating that it's not connected to a network. I am 100% sure that it is connected to my wireless network because I check that out and print a copy of the page stating that this printer is connected.
What could the problem be? Please help!

Hi daisyforu,
Welcome to the HP Support forums. I understand that you are getting an error message about not being connected when you try to enable the web services for your Photosmart 7510.
The error message you are receiving is indicating that the printer doesn't have an independent connection the internet. Please set a static ip address and manual DNS servers by following the steps below.
1)       Please enter the ip address of the printer into the address bar of your browser (Internet Explorer, Chrome, Firefox, or Safari, etc). My screen shots below are from Safari but the location of everything is the same regardless of the browser. This will bring up the embedded web server of the printer.
2)      Please click on the network tab. You should see the Network Summary for your printer. Please click on 'Networking' on the left hand side menu.
3)      Please click on 'Network Address (IP)' on the left hand side menu.
4)      Please on the radial button beside "Manual IP" then click on "Suggest a Manual IP Address" button. The Manual IP address, Manual Subnet Mask and Manual Default Gateway should populate for you. Please click on radial button beside "Manual DNS Server". For the Manual Preferred DNS Server please enter 8.8.8.8 and for the Manual Alternate DNS Server please enter 8.8.4.4.
5)      Please click on 'Apply'. If you get a warning message about changing the ip address please click 'OK'.
6)      Please turn the printer off by the printer's power button. Please wait a minimum of 15 seconds and then turn the printer back on.
7)      Please press the ePrint icon in the upper left hand corner of the printer's front panel. This should prompt you to accept the terms of service. Please choose 'Accept'.
8)      When prompted about the automatic updates please choose 'Yes'. The printer should now show the HP logo while the printer communicates with the HP servers. The Web Services information sheet should print with the claim code for your printer.
Now that you have the ePrint feature is turned on before using the Fax feature I would recommend that you customize your ePrint email address. I have included a document here on how to do that.
You should now be able to get your eFax setup. I have included a document for you on how to do this here.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Lost some of contacts after turn off then turn on

After turn off then turn it on . Some contacts r gone ; only number r leftovers

Hello,
Is it really an iPhone 3G with iOS 5.1? I thought it was no longer supported.
I had that occurred to me before but I restored it from an existing backup and the problem went away. If you could, you can try and upload your crash logs from ios 5+ and see what is causing the restart.
If there is nothing to lose (e.g. Data), then you can see if a full restore (e.g. Set it to factor settings) will help. Below is a link:
http://support.apple.com/kb/HT1808
I hope this helps but please feel free to wait for others to input.

MacBook doesn't want to turn off or logout...

I have had my macbook for a few months now (since August) and every since I've updated to Leopard my macbook sometimes doesn't want to turn off or logout. When this happens a message pops up telling me that the finder was not able to close and that I should try force quitting it. But when I force quit it nothing really happens. The bar on top of the screen and icons on the desk top go away and never reappear and when I try the power button nothing happens and I am forced to unplug and take out the battery. If anyone could help me with this issue between now and tomorrow, I would be highly appreciative.

Hi naroke!
When there are Finder related issues, often times the best (and easiest) fix is to re-install the operating system from the OS X 10.5 discs. You can try a few things before going to that point, though, so try these and it might fix the issue.
1. Reset PRAM (http://docs.info.apple.com/article.html?artnum=2238)
2. Disk Utility / Repair Disk (http://docs.info.apple.com/article.html?artnum=25751 / http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html)
The next option, might make sense to do an archive & install of the operating system.

Computer fully charged and turning off

My computer is completely charged. When I take it off the charger, it turns off after a few minutes. When I plug it back in, it comes on by itself. What's wrong? It's not even a year old. It shouldn't be doing this!!!

If it is less than a year old, the warranty is still in effect therefore make an appointment at an Apple store genius bar and have them correct the problem.
My guess is that there is a problem with the battery or the power circuit. You could try a SMC reset and see if that has any positive affect.
http://support.apple.com/kb/HT3964
Ciao.

My mac mini loses connection with my receiver after turning off the receiver then back on

My Mac Mini loses connection with my Onkyo receiver NR-609 after turning off the receiver then back on. The only way to reistablish the connection is to unplug then replug the HDMI cable to the Mac Mini. There's no effect if I unplug then replug the HDMI to the receiver. Any help or suggestions would be appreciated. I've searched a lot but haven't found much of anything so if this is covered elsewhere I would greatly appreciate a link.
Thanks in advance

Hi and thanks. I don't know about the audio prefs. When it happens I am not able to see or hear anything from the computer until I un/re-plug the HDMI to the Mini. I'm not sure it's changing to something else because there's nothing else connected for it to change to. I could see that perhaps the audio will change to the Mac Mini's internal speaker.
I found out last night that if, after I lose the signal, I use my ipad to play a video on the Mac Mini using the Remote app and home sharing the signal gets righted and I can see/hear the computer again. It's quite an inconvenient fix though and I wish and hope someone here can help me.

Nokia C7 Dead after turn off, never turn on

Help me with this problem. I've bring the phone to shop and they sent to nokia care but after i got home. the problem arise again. Now i've been disconnect about 2 days.
The phone would not turn on anymore.

I have bring the phone to shop as I faced same problem (Nokia C7 Dead after turn off, never turn on) and they sent device to nokia care center. I got the new cell phone as it was in guarantee/warantee period(I am appriciating the service/help provided from Nokia side, Thanks a lot). On the same day I took that new cell to home and faced same problem again. The phone is not getting switched ON . I am disconnected from world for last 2-3 weeks as the same issue occurs twice. This is very opposite to Nokia's statement "Connecting people". Any help From Nokia?????
I'll provide the device details if Nokia going to help.
Thanks in advance for support !

After turning off private browsing Safari crashes immediately upon launch.

After turning off private browsing Safari crashes immediately upon launch. I tried soft-resetting, and clearing my cookies and cache. I basically launches in private browsing mode and then immediately tries to switch to regular browsing. When the screen changes, it crashes to desktop.
Any ideas, other than wiping my iPad?
(I'm using iOS 5, of course, but it is not available under the Operating System dropdown in this forum)

I'm seeing the same problem, and it was repeatable for me. iPad (original 3G, 64GB), iOS 5. (There are now a couple threads with this same problem.)
Once the crashes start, it would continue to crash every time I tried to bring up Safari. It crashes just as it finishes showing the tool bars, but before any content is displayed.
Manually killing the app did not make the problem go away.
One time, shutting down and restarting the iPad fixed it, but that solution did not work the next time I went in and out of Private browsing. Also, once the crashing begins, going back into Private browsing did not stop the crashing.
The last time it got into the crashing condition, I stopped the crashing by turning off the setting to display the Bookmark bar. Strange!
I have like 20 Safari crash logs that I hope will get auto-sent to Apple sometime today (I reenabled the send data to Apple option).

My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers?

My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers？ Thanks a lot !!!!
我的书签在电脑突然被断电之后全部丢失了，我该怎么办呢？？谢谢啦！！~~~~

This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
* http://kb.mozillazine.org/Lost_bookmarks

Help! Lumia 800 doesn't charge after turning off

Similar Messages

Maybe you are looking for