Help-Macbook pro screen pixelated on start up

I have a mac book pro mid 2011 2.5 GHz Intel Core I5
8 GB 1333 MHz DDR3
AMD Radeon HD 6750M 512 MB
OS X 10.9.2
A while back when I booted it up it would get pixelated lie in the photo, I notice it now happens everytime I start up. There is also a video I poseted on you tube at:  http://youtu.be/YgVUk0evuY4  and : https://www.youtube.com/watch?v=fduOMmzWQoE
I have reset PRAM and SMC I have aldo run the AHT at fast and at full with no correction to the issue, I have also reset in safe mode with no fix either. I am unsure where to go next. Any help is appreciated

sgalbo wrote:
I am unsure where to go next.
Make a genius bar appointment.  You probably have an issue with the GPU.  They will be able to give you a definitive answer.
Ciao.

Similar Messages

  • Macbook pro 2006 can only start on safe mode and it has a lot of squares on the screen

    My macbook pro 2006 can only start on safe mode and it has a lot of squares on the screen even if I use an external display help? heres a picture http://i61.tinypic.com/vebszt.jpg

    Mespinal130,
    have you tried running your MacBook Pro’s Apple Hardware Test, to see if it can detect anything amiss?

  • My macbook pro screen has froze, since last night. screen is white. small box on screen reads: if an application doesn't respond for a while ....... the app shown is finder, the cursor is a colorful spinning wheel.  help!!

    my macbook pro screen has froze.  the background is white.  there is a small box on the screen that reads:  if an application doesn't respond for a while, select it's name and click Force Quit.  the app is Finder.  the cursor is a very colorful spinning wheel while inside the box and an arrow outside of it.  I have tried using the command-opt-erase keys, nothing.  please help!!

    Restart the MacBook Pro. To do this, press Control, Command and Eject keys, or hold the Power button until the Mac turns off

  • Hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

    hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

    First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
    The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
    Regarding the adware, see my Adware Removal Guide.
    (Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

  • Macbook pro screen dims after waking from sleep?

    Does anyone know why my macbook pro screen dims when waking from sleep or waking from my screen saver? I can't get it to stop doing this. Thanks.

    It sounds like I have the same thing happening. It's more like the colors are washed out, like there is less contrast. I have a hot corner set up for my screen saver. Once I activate the screen saver for a second and then deactivate it, the Macbook screen goes back to normal. I have a 30" Samsung 305T monitor set up as a second (main) screen for when I'm working at home, which is most of the time. I haven't had it unplugged from the Macbook since this started, so I don't know if it happens by itself. I do know that the Samsung looks fine when waking up from the screen saver at the same time.
    I tried to find others with this problem in this forum, but got tired of looking through all the other posts that had nothing to do with this problem.
    Can anyone help us?

  • Translucent impromptu possible "hacker" message interrupts current session, locks MacBook Pro screen and demands that I restart by holding down the power button of my LapTop to turn it off first. Any thought? Could this be another way to mess with us?

    I was listening to a YouTube video on the history of X15 rocket airplanes. All of sudden, out of the blue a translucent back message drops top down, stops the video, locks up my MacBook Pro screen and demands that I restart my lapTop by first holding down my power switch, then turn the lapTop back on. This has never happened to me before. The message was in black & white, and in about 6 languages: English, French, Spanish, Dutch, Japanese, Chinese. Does any one recognize what this might be?
    The Computer turned back on just fine as if nothing had Now I am freeking out that they could be reading my key strokes or something. Could they have used this tactic to install malicious software on my computer by first taking away my ability to do anything about it being that I am not a software engineer? Can any one think of anything simillar? I reported this as a bug to APPLE the regular way, then cleared my Safari cookies, then run software update which returned nothing new as in " your software is up to date at this time."
    Can any one please help?
    A-NmN. 

    Hi stedman1,
    Thank you so much. This seems to make sense to me now. I was freaking out a bit that some hacker could be messing with my MacBook Pro. I will be monitoring this issue from now on as it has never happened before. 
    A-NmN.

  • Cleaning MacBook Pro screens

    Does anyone know if it is safe to use Kensington's Screen Guardian to clean a MacBook Pro screen? The product contains: Water, 2-Butoxyethanol and Ethanol. Also can this cleaner be used on an iMac and a iPod Touch screens. Thanks for your help.

    Apple recommends against using any cleaner with alcohol or ammonia to clean any LCD screen. Those chemicals may damage the screen coating. The best way to clean a laptop screen is to use a microfiber wipe (such as those sold to clean eyeglasses) or a damp ( not wet) soft lint-free cloth. For more information, see:
    http://support.apple.com/kb/HT3226
    Butyl cellusolve, a component of Screen Guardian (according to their material safety data sheet), is neurotoxic among other toxicities, by the way, so I'd avoid it even if it weren't risky on LCDs.
    Regards.
    Message was edited by: Dave Sawyer

  • My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

    My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Macbook Pro Screen wakes up from sleep without any acitvity

    I've set my MacBook Pro screen to turn off after two minutes of activity. I've had this setting for all my Macs and I've never had any problems.
    Recently though, my MacBook Pro's screen turns on by itself without me touching the computer or any mouse attached to it. What could be the problem?
    It's really annoying when the screen turns on at night.
    Any help will be appreciated.

    I have the same problem. I brought up console and there is nothing at the same time as the screen turning on. My situation is as follows:
    I put on a podcast. The only applications running are firefox and iTunes. I turn the screen brightness all the way down with the F1 key, then mouse over the corner of the screen set to turn the monitor off.
    After about 6 minutes, the screen comes back on at brightness level 1. If I touch a button or the trackpad the screen turns back off. It stays off for about 6 more minutes and does it again.
    Edit: I just checked the logs with all showing and the only thing I see is a Wake Reason = EC LID0.
    Any tips?

  • My MacBook pro screen is broken (awaiting part for repair) can I transfer keynotes pres onto iPad air? Without a home screen to navigate?

    I am eagerly awaiting the correct parts to repair my MacBook pro screen (my husband dropped it). I have an iPad air but for some reason iCloud has only stored a very old copy of a keynotes presentation I need? Anyway to transfer with being able to see MacBook screen to guide me?
    Cheers

    You misunderstand the memory management scheme and misinterpret the display you're seeing.
    To start with, free memory is wasted memory. Once some disk contents have been brought in, it is wasteful to discard that data just to make the RAM that it occupied "free." Inactive memory is memory that is not currently used, can be given to an application that needs it without doing any disk I/O (or used as a destination for reading disk content) but which currently holds disk data that might be useful in the future. I.e., it's file content of some sort.
    To get a better idea of how Mac OS X manages RAM and how to interpret the Activity Monitory dispaly, see this tech note: Mac OS X: Reading system memory usage in Activity Monitor.
    Rosetta is indeed memory hungry, but it's an interim solution. With 2 GB of RAM installed, you can run a lot of applications with alacrity.
    Lastly, your Safari, an Intel-native application, is currently using 2 GB. This is a known issue with Safari, though it seems to me that it has gotten better since 2.0.3 was released in 10.4.6. Still, it's a bit of a memory hog, to be sure. Now that Firefox, Camino and Seamonkey are all available in Universal (Intel native) forms, you have alternatives. Firefox seems a lot more parsimonious when it comes to RAM.
    Randall Schulz

  • My 13 in MacBook Pro screen randomly goes black.  It was purchased in 2010.  It's a 10.6.8.

    My 13 in MacBook Pro screen randomly goes black.  It was purchased in 2010.  It's a 10.6.8.  It started just recently.  The only thing I can think of is is that my 7 year old son played an online game with the computer.  I did check the "hot corners" settings and that is not the issue.  When the screen goes black, I generally end of foce shutting it down with the power button. 

    My 13 in MacBook Pro screen randomly goes black.  It was purchased in 2010.  It's a 10.6.8.  It started just recently.  The only thing I can think of is is that my 7 year old son played an online game with the computer.  I did check the "hot corners" settings and that is not the issue.  When the screen goes black, I generally end of foce shutting it down with the power button. 

  • 2.2ghz macbook pro screen

    Hi, my macbook pro screen cracked after 8 days. I bought a replacement screen brand new online. I have 2 questions, first my machine is the 2.2ghz macbook pro that was 1999.99 list price. Is the screen I purchased the correct one? its model number M9969LL/A and approximately how much labor time should I expect to pay for to re-install this?
    Is it true that apple does not cover these? The machine did not drop or anything and there is no damage to it. There is just a black circle then a spider web of glass on the inside and then all the pixels have turned to colored lines.
    Thanks and I hope you all had a great Thanksgiving!!
    Steve

    I have the Early 2011 2GHz Macbook Pro and I have the same problem too.
    I switched out the logicboard a month ago and today the graphics just went distorted.
    Any solutions? Now I'm thinking it is the Graphics Card.

  • Gray and white smudges in MacBook Pro Screen

    About 1 week ago, I noticed 2 faint grey smudges in the middle of my MacBook Pro screen. I dismissed it at the time because I could barely see them unless I looked extremely close on a dark screen. I opened my computer up yesterday to see that the amount of spots had tripled from 2 to 6, are becoming more apparent, and  all in the same area in the middle of the screen. They are still only able to be seen on a dark screen. The smudges are about the size of the cursor Also, when I tilt my head or tilt my laptop screen far back on a white screen, I can see that those spots turn slightly brighter white than the rest of the screen. While the grey smudges aren't connected, these white areas appear to connect to make a circle.
    Another quick note, in December, I had a similar problem with my screen. The white spots were in the same circular shape and clear on any background, however, instead of grey smudges, I had spots that were black in the exact same circular shape. Apple labeled it as pixel anomalies and replaced my screen for me with no problems. Do you think it is pixel anomalies or something different? I bought the laptop in September 2011 and it is under every

    Take it in for repairs while you are still under warranty.

  • Calibrating PAL CRT monitor and Macbook Pro Screen

    Hi,
    Can anyone offer any tips on how to calibrate a monitor and the macbook pro screen for PAL colours.
    On my monitor you can adjust the brightness, contrast and the colour temp (which is set to 6500). You don't seem the be able to adjust the colour, for example make it black and white, unles you can do that by lowering the colour temp.

    ... but the MXO won't help the OP with his MacBook Pro screen.
    True, but he did say that he wanted to not only calibrate the MacBook Pro, but another monitor as well...
    Can anyone offer any tips on how to calibrate a monitor and the macbook pro screen for PAL colours.
    Just offering a suggestion...not knowing what that other monitor was.
    Shane

  • MacBook Pro 2009 does not start

    Hi everybody, my Macbook pro 2009 does not start anymore.
    I can hear the startsound, the screan lights, thats it.
    I tryd PRRAM Reset, Holding down alt key,
    changing RAM, nothing works...any ideas?
    Thanks

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

Maybe you are looking for

  • Error connecting to websphere MQ from weblogic 10.3.0 :EndPointFinder

    1)     We are in process of connection from weblogic 10.3.0 to websphere MQ series . We are trying connecting to the response queues using MQclient binding . I created .binding file using following configuration DEFINE QCF(BBNMSRMSConnectionFactory2)

  • How can I publish a website to a different domain name other than .mac

    I have a domain name with godaddy.com and I want to publish a website design with iweb. How can I do it?

  • CS 5.5+: am I just doing theming wrongly?

    Hi there Apologies for the long message - I wanted to be clear what I've tried and what my settings are! Any help you can provide is most appreciated. I've built a sample InDesign extension using Extension Builder 2.1 and ActionScript. Although I am

  • Curious disk & Disk Utility problems

    When I run Disk Utility on my drive I get this message: "Disk Utility stopped verifying [name of my disk]. This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple

  • Basic configuration on SPA3102

    Hello all, First of all, excuse my terrible english. I´m Brazillian, and here, I can´t find any help for configure this router. I already installed the SPA3102. He´s working ok in my network as a router with DHCP working too. I don´t want to use VOIP