Help! Macbook pro wont start!

So I have recently replaced my old HDD with the new Corsair 128GB SSD and everything was great. The installation was fast and it worked flawlessly.
One fine morning, it refuses to start. I press the power button and it would just start for 1 sec then turn off. I opened the macbook pro up and put back the old hdd just to see whether its the SSD but even then it wouldn't start up.
Any idea what could be wrong? I have double checked all the wires and everything which looks fine. Please help!

Insert the Applications DVD that came with the MacBook, press D key when your computer starts and run the extended test two times. If you haven't got a DVD, press D key when your computer starts

Similar Messages

  • Macbook pro wont start flashing question mark.

    I sold a macbook pro i owned since new and it arrived with the buyer yesterday now im getting death threats!
    I freshly installed 10.5 leopard on my mbp and used it for 4 hours without issue.
    I did have a problem after installing ms office and deleted it and all preference files in same folder and worked ok after that. rebooted 3 times no problem.
    The buyer is freaking out saying its trashed and wont boot just has a flashing question mark, why would this be happening???
    Please help he's threatening me!

    Just replace the hard drive.
    If he lost data, look at data recovery services*:
    http://www.macmaps.com/backup.html
    And in the future always recommend people backup important data frequently.
    If he still gives you death threats, call the police.
    - * Links to my pages may give me compensation.

  • MacBook Pro wont start up passing the grey screen, MacBook Pro wont start up passing the grey screen, MacBook Pro wont start up passing the grey screen

    ; my macbook pro is a 15" . i believe its a 2010 model , i left it on by standby last night . and this morning the internet wasnt working , so then i decided to restart my laptop . and so right now , i start it up . and it gets to the white apple screen when it first load , then all of a sudden it shuts down on me . before it shut down by it self it was on the apple screen , loading and loading . couple of people had said it was the battery but im not sure . i hope theres any help , i appreciated . thanks .

    I found this link.
    http://techtips.salon.com/create-mac-recovery-disc-2797.html
    It explains that you must install Snow Leopard to an external drive or LARGE USB Thumb drive, at least 16GBs in size, and then boot the system from that external media and run disk utilities from there on the internal drive.
    So if you have a LARGE USB thumb drive or a external hard drive you can continue this to see if the internal hard drive has failed. If not you could buy one tomorrow or take the system into a Apple repair center.
    Wishing you the best of luck.

  • Macbook pro wont start up

    Help! My macbook pro from 1 year old won't start up. all I see is the grey screen with apple en the spinning wheel. Someone help?!

    Start with these instructions:
    http://support.apple.com/kb/TS2570
    Ciao.

  • Macbook pro wont start with 3 beeps

    hi
    Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
    What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
    Thanks

    Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

  • Macbook pro wont start, click when charging thats it

    Hello,
    I have a Apple Macbook Pro 15" model number: A1286 purchased in january 2011.
    It wont start and has a very faint clicking noise when it is trying to charge. When the charger is on it the light is bright green but the charge button to show you the life left in the battery will not work as wont the screen or anything else.
    Could someone asist me and let me know whats wrong with it please.
    Regards,
    Jimmy

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • Bad System call. Macbook pro wont start up

    Hello,
    I seem to have come across a problem. I thought it happened after trying to install new software through X11. I restarted my macbook pro and received about 15 error messages all containing information about certain extensions not being installed properly. I remember one being about my 802.11 airport but I havnt altered anything to do with it.
    When I turned my macbook off and on again I got a black screen with info about about bad system calls, throttling too quickly etc..
    I noticed a number of people mentioning the i tunes update which I tried to install before it completely died and it wouldnt actually finish the update so i just force quit software updates. Now my machine doesnt do a thing: when I turn it on I receive the apple symbol with the spinning cog and eventually it goes back to the black screen with the bad system info.
    I started in single user and tried fsck - fy and it said everything was ok. I tried to start in safe mode however when I turn my macbook pro on I dont hear the chime- therefore I dont seem to be able to enter safe mode.
    If anybody can help ASAP it would be much appreciated- got lots of work that needs doing on it:)
    cheers
    Graeme

    Try here >  Mac OS X: Gray screen appears during startup

  • Macbook pro wont start up and stuck on a restart screen, after mountain lion installtion failure

    I tried installing Mountain Lion on my Macbook Pro and the installation failed because my "hardrive was damage and could not be repaired" it then told me to restart my computer and try again which i did. However i am unable to even get back to my desktop because the Macbook starts up and i get the grey Apple logo and then this screen appears:
    Instructing me to restart my computer, it has been stuck on this cycle for a few days now and i have no idea how to fix it.
    Any help would be much appreciated
    StephBeard

    StephBeard,
    if you still have your MacBook Pro’s original box, it can be found on one of the stickers on the box. If you don’t still have its box, it can be determined from your MacBook Pro’s serial number. If its serial number has eleven characters, write down the last three characters; if it has twelve characters, write down the last four. If you don’t have its box, please include in your reply those last three or four characters of its serial number.

  • MacBook Pro wont start, and is to hot

    My Macbook Pro won't start and the bottom of it pretty hot. The light comes on like its in sleep mode, but wont power up.

    nosaj49854 wrote:
    Thank you very much, it just started back up, i thought thats what the problem might of been.
    You're welcome. Glad it's working for you again.

  • Macbook pro wont start up after trying fsck -y (incorrect block count)

    my 2 months macbook pro won't start up after numerous attempts and ive tried fsck -y and it says "incorrect block count for file system.log (it should be 184 instead of 108) help please

    it just says start up disk full, its not full however it has at least 10Gb of space left.
    Your HD is full!  How large is your HD?  You should never let your hard drive get to where you have only 10-15% of space left.  You need to do some serious housekeeping.  However, you need to get to your desktop to do that. 
    Can you safe boot?  Read the threads over in the "More Like This" column over here.----------->

  • 2012 Macbook Pro wont start or charge

    So my macbook pro 13in was around 20% before i went to work then when i came back to it, The Macbook pro would not start and so i pluged it in and the charger light flickerd from green to amber back and forth. I then tried my charger for my older 2009 Macbook White polycarbenite and when i used that ones charger the light just stayed off but i did know that ones charger did work with the Pro. My guess is the logic board is fried some how or the battery has faild but my guess would be that it would still be able to start even with a bad battery. The Mac will not make the start up sound or the led trun on.. on the frount of the computer.
    Thanks for your help
    Gino

    Connect the charger that came with the machine to a good power source with not a lot of other items on the same power line from the circuit breaker.
    Connect it to the Mac and perform a SMC Reset here and let it charge up for a few hours or overnight before using it.
    1. SMC reset
    >>Instructions to reset SMC
    Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
    Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc.  If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
    Will not hurt the machine resetting if it's not broken.
    Other related hardware problems (optional):
    Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
    Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
    Apple: Laptop won't power up   Apple: Computer won't power up  Troubleshooting optical drive
    Magsafe problems   Magsafe problems more
    No power on still? Data Recovery options: Is my personal data lost?  Find the closet Apple repair/distributor
    If that doesn't work, please make a appointment with Apple for a repair or evaluation, also if you haven't yet purchased AppleCare you should do so as well as a couple of backup drives.
    Most commonly used backup methods

  • MacBook Pro wont start after 10.8.3 update

    So I tired installing the 10.8.3 update from the app store  and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
    Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new),  during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
    It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
    What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

    It sounds like your internal drive is failing, or has failed. What backups do you have?

  • Macbook pro wont start up and clicking sound

    Hi everyone
    My girlfriend spilled a coke on my computer couple days ago and my MBP shut down immediately. After all i took it to the apple store in Turkey and they said the problem is from the battery and they took it off and I started to use it on charge until i get a new battery. All day i used my macbook pro on charge without battery on it. Anyway I turned my computer off and next day press the power button to start it up and it didnt start up at all. Mag safe works OK. Charger light is green light and everytime i press the power button I hear a clicking sound and my built in cam light is lighting up. I couldnt figure it out what is wrong.. If you guys had any problem like this before or know the problem about it please share it with me.. I will be appreciated.. Thanks

    Problems related to liquid damage can manifest in different ways.
    It is hard to recover from liquid damage.
    Best.

  • Macbook Pro Wont Start Up After Update

    Hey All,
    I was in the middle of installing the most recent update for OSX when my computer froze completely. I shut it off by holding down the power button. Now, when I start it up, right after the apple, it goes to a screen with some script in the upper left hand corner, and a box in the middle with a picture of the power button telling me I need to restart. I've restarted it several times and it just keeps going back to that screen.
    I have booted it up from the install DVD and run disk repairs and verifications, as well as checking the system profiler and utility, and nothing seems worng. I've tried starting it up by choosing to start up from the folder and it still didnt work.
    If you've got any ideas, let me know. All your advice is appreciated.
    Thanks!
    Macbook Pro   Mac OS X (10.4.8)  

    I meant to say that the system would have been made unstable after the semi-complete update (if it was in the middle of replacing a crucial system file).
    An archive and install would replace all system files, so wouldn't hurt anything. You might have to reinstall any system-intrusive applications (Palm Hotsync springs to mind, if you have that) but it will certainly fix system corruption, if that is your issue.
    After the reinstall, if you encounter a complete freeze again, then I would definitely be suspicious of hardware. Possibly the original RAM, but it could be somewhere else in the system, such as the logic board. In those cases, you would have to go back to Apple for repair. (Your Macbook Pro, that is, not you.)
    Matt

  • Installed new memory and Macbook Pro wont start.

    I bought a total of 8GB from PNY for my mid 2009 MacBook Pro (2.8GHz Intel Core 2 Duo).  I installed it and my macbook wont turn on.  When I press the power button it just beeps.  The LCD doesnt turn on.   I reinstalled it a few times to make sure that it is sitting correctly with no luck.  I reinstalled my old memory (2x2gb) and it works fine.  
    The new memory I bought is PNY  8GB (2x 4GB) Bual Channel DDR3 PC3-10666.  The package says that it is compatiable with 1333MHz and 1066MHz.  This is the listed memory on the PNY website for Mac laptops. 
    Am I using the worng type of memory?  I'm pretty sure my MacBook Pro can take 8GB...right?
    THANKS!

    One beep indicates no RAM installed. See http://support.apple.com/kb/HT1547.
    What happens when you reinstall the old original memory? Does the computer boot then?
    You might want to read the information at macsales.com (OWC). Certain models had to be updated to take additional memory.
    Specifically the NOTE: on this page: http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

Maybe you are looking for

  • Firefox 7 crashes when using "open all in tabs"

    Since upgrading to FF7 (and 7.0.1) every time I use the "open all in tabs" command from the folder of bookmarks in the bookmarks toolbar, the whole thing freezes and never finished loading any of the pages. I also can't open another window and get an

  • [Solved] Dophin 4.8 doesn't drap and drop to remote locations

    I think I've found a really really minor bug in Dolphin: When I try to drap and drop a file from one tab/window of Dolphin locally, it always works and presents the expected dialogue to decide whether I want to move, copy etc. But when the source is

  • Error in JSF2.0 !!!!! URGENT !!!!!

    Using: tomcat 6.0.18 Using: JSF 2.0 -------------------------------- JSF Managedbean public class TestHandler { private Boolean active = null; public Boolean getActive(){      return active; Public void setActive(Boolean active){      System.out.prin

  • Vendors display of PO's without SUS

    hi all, we are allowing vendors to directly access EBP system to create confirmations. the standard vendor role does not allow PO displays. However if we add PO transaction (issue PO), then potentially any PO from any vendor can be seen by the vendor

  • Get component closest to point x, y

    Here is a fun one... I have a JPanel with various Components in it that are layed out manually (ie.. null layout). When the user clicks in this JPanel I would like to know which of these Components is closest to the point where the user clicked. Does