Help mailbfr restore failing rsync fails

Hey
so the raid on the server failed, so rebuilt the server and tried to restore from the backup
but when running the backup
mailbfr -r /path/to/mailbackup --all
everything seems to go ok until we get to the bit where it says
Restoring Mail Store default from /path/to/mailbackup/cyruspartitionsDIRS/default/ to /path/to/mailstore
then i get the following error
rsync: connection unexpectedly closed (8 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-24/rsync/io.c(359)
after that it tries to do the rest of the restore but obviously fails because it has not restore the mailstore
any help would be grand
thanks
Calum

full backup to an empty mailstore location
ie it has to copy everything from the backup to a new folder ive nominated as the new mailstore location.
i set this location using serveradmin before running mailbfr so mailbfr grabs the mailstore location from imapd.conf
everything seems to work but fails when it gets to restoring the cyrus dirs. i dont think its broken files as psync has no problem copying the exact same files, in fact its nearly done...all 166gb of it!
was thinking after copying the cyrus dirs manually with psync then running the mailbfr to reconstruct the database...essentially running mailbfr to restore but runing each step manualy
any tips on what exactly mailbfr does when doing a full restore
so far we managed to restore the mail database into /var/imap and restored all the postfix and cyrus config files
it was when we got to the mailstore restore that it failed so if you can tell me what steps mailbfr does after that it would be great
thanks again for your quick response
cheers,

Similar Messages

HELP! Restore Failed

Updated to new iTunes and tried to update iPhone 3GS and there is an error and now won't even restore. It gets all the way to firmware update and then Error -1 pops up. Never had issues before for updates. All drivers are up to date.
The phone isn't jail broken. What do I do. I literaly don't have a phone now... can't call anyone.
Gerry

Also... every time I open iTunes it tells me I'm in recovery mode - the phone. Try to restore it and this time I got unknown error 37... what the heck?

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

My new iphone 5s is locked with 'Restore failed'. i have pressed the sleep button togther with the radial button the fron to restore but nothing happens except it clikc to take a photo. please help soooo fustrated?

my new iphone 5s is locked with 'Restore failed'. i have pressed the sleep button togther with the radial button the fron to restore but nothing happens except it clikc to take a photo. please help soooo fustrated?

What is the error number in the error message? To reset the phone you must press and HOLD both buttons for at least 10 seconds, and longer until an Apple logo appears.

Please help me ( restore DB fail) urgent..

i'm trying to restore the database but its giving some error please help me out i'm a beginner
here's the error
TITLE: Microsoft SQL Server Management Studio
Restore failed for Server 'HP-PC\SQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ResturantManagementDB.mdf'.
(Microsoft.SqlServer.Smo)
BUTTONS:
OK

the database file is being created on the path C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\
make sure your sql server service account has permission to create/write/read files on that location.
to know your sql server service account -- go to run-- type in configuration manager ---sql server ---you should see the service account.
alternatively, you can create the file on a different location where your sql service account has permission to read/write the files..
Hope it Helps!!

HT1766 My Iphone screen is frozen as "Restore Failed. Can someone help?

I just receive a company issued Iphone 5. I wanted to download music from my wifes MacBook through our iTunes files. So I connected the devise to the MacBook. I can't remember all the steps but it started to Restore my device idicating it was restoring my wife's Iphone. I paniced thinking that my company phone would can restored with my wifes stuff so I unplugged it from the MacBook. Now the phone screed is frozen at "Restore failed" and I don't know what to do. Can someone help me to get the phone to work.

Hello Georgept,
If the iPhone was disconnected while it was going through a process, you may need to put it in recovery mode and restore it. If you have a backup of your phone on the iCloud, or iTunes on the computer for that matter, after the restore you will be presented with the set-up screens and will have the option to restore from an iCloud or iTunes backup to bring all of your data back. The following article has the steps for putting the iPhone into recovery mode and restoring.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
5. Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
Once the iPhone has been restored, you can use this article as a reference for restoring from your iCloud or iTunes backup to recover your data.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thanks for reaching out,
-Joe

HT201210 Hello, I wonder if you can help me. My iphone will not restore. I have downloaded all available downloads and the software and firmware restore was almost complete when the message similar to 'iphone restore failed' appeared. I cannot make or rec

Hello, I wonder if you can help me. My iphone will not restore. iphone prompted restore in itunes I have downloaded all available Apple downloads and the iphone software and firmware restore was almost complete when the message similar to 'iphone restore failed' appeared. I cannot make or receive call

Hi, Mangy1.
Thank you for using Apple Support Communities.
Here is the best resource when experiencing issues restoring your iPhone.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If the issue still persists, please reply back with the exact error message received.
Cheers,
Jason H.

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

Restore failed due to iTunes being corrupt

Attempting to restore from a 'successful' backup got a warning message the restore failed due to a iTunes being corrupt. Found the following log
2013-06-19 13:14:14.979 [8216:f38]: restore library built Dec 21 2012 at 16:17:03
2013-06-19 13:14:14.979 [8216:f38]: iTunes: iTunes 11.0.4.4
2013-06-19 13:14:15.041 [8216:f38]: iTunes: Current software version: 10B329
2013-06-19 13:14:15.042 [8216:f38]: iTunes: Software payload version: 10B329
2013-06-19 13:14:15.042 [8216:f38]: iTunes: Using iTunes state machine
2013-06-19 13:14:15.636 [8216:f38]: iTunes: Restore error -34
The SAD thing is not only is all my data gone but the phone is not usable it is stuck on a setup screen.
Please help – What has happened to Apple????????????????????

Well I found a article that may help you.
Error 34:
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
http://support.apple.com/kb/TS3694

HT1430 My Iphone is frozen with a screen message restore failed -can't turn it off nothing no response?

My Iphone 5 is frozen with a screen message restore failed ...I can't even turn it off ?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

My iphone is stuck on a frozen image saying 'restore failed'

I Plugged my Iphone into the computer to get music onto it. It came up with 'set phone up as new IPhone or Restore from other device (with a list of all other devices) I accidentely pressed the other device option. Just as it started to restore my phone, I quicly pressed cancel and now my Iphone is stuck on an image saying 'Restore Failed' It won't let me even turn my phone off! Please help me, I seriously need my phone today, I don't know what to do! I have tried plugging it back into Itunes but I don't know what to do from there.
Please answer, thanks

Hello Lois,
Thank you for providing the details of the issue you are experiencing with your iPhone. I certainly understand the importance of being able to access your iPhone. I recommend the following resources for the issue you described:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M.

Restoring failed: There is insufficient system memory in resource pool 'internal'

Hi,
I am going through all those similar questions but non of them solved my issue.
Our database is lost by mistake, now we need to recover the database from the backup. The backup file is 4.23 GB and when I am trying to restore the database after 40 minutes, I am getting the error 701, There is insufficient system memory in resource pool
'internal' to run this query. Restored failed and when i close it, the state for the DB is still "Restoring".
I did all these challenges but no use, please advice me how to retreive my DB back it is very important and vital.
enabled the "AWE"
enbale/disable the resource governor
changed the server
re-install SQL server
Please help me to sort out the issue.
Regards

Hi,
Thanks for your help. My server is Microsoft SQL Server 2008 R2 (SP1) (Intel X86) - Developer Edition on Windows NT 6.1 <X86>
Memory_usedby_Sqlserver_MB = 118
Locked_pages_used_Sqlserver_MB = 0
in resource pool 'internal' ( not allowed ) . I install SQL server 64 bit on another 64 bit operating system as well but this time I got another error.
The backup file can not be added it gives Sql server timeout error. ( this work for another smaller backup file) . I configure the query timeout but not solved. What you suggest now?
SP1 for SQL server 2008 R2 is not the latest but the latest is SP2. Please apply it when you move ahead.
Since you had 32 bit this error can come.I cannot reproduce the error neither I know what all queries or processes were running when you got OOM error during restore so its hard to tell .Did you set value for MAX server memory in sp_configure.How much physical
RAM do you have ?
Can you post complete error when you tried to restore backup on 64 bit. Also make sure you cannot restore backup from 2008 R2 to lower versions.( like 2008, 2005)
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Restore failed in sql mgmnt

My restore db failed in SP 2013
i followed the steps mentioned here:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/02/07/back-up-content-database-from-sharepoint-2010-and-restore-it-to-sharepoint-2013.aspx
but i am getting restore failed.
help is appreciated!

You might want to include your error message.
Based on your other thread you're duplicating a database on the same server, so those steps aren't quite perfect.
This guide covers the process better for 2014, and you can see previous versions as well:
http://msdn.microsoft.com/en-us/library/ms190436.aspx

Help mailbfr restore failing rsync fails

Similar Messages

Maybe you are looking for