Help, Major exporting problems after re installing FCPX

I decided to wipe my hard drive clean on my mac book pro and re installed FCPX and Logic Pro.  For some reason now exporting with FCPX is totally different than it was from my original install.  In the orginal install the Share Menu Was available in the top tool bar, and when I choose to share to apple devices I could choose, ipad, apple tv, Mac, etc.  When exporting a share monitor would pop up and the file would complete as a MP4 so I was ready to upload it youtube.
Now since the reinstall the share menu is docked under the file menu and when I choose to share to apple devices 720 it does not give me anywhere near the same options as before.  I can still choose to change the codec and settings, but not in the same mannor as before.  I can now only export in .mov as trying any other formats only renders 5% then stops.  Also no share monitor or render progress shows up anymore, the only way to track download progress is to pull up the background task monitor.  This is all completely different then from the original install and I can't seem to find any information as to why.  It sounds like most other users have the options of choosing mac & pc like I did before. 
Can anyone explain what happened or offer a solution so I can continue to render videos as MP4 like I did before?
Any and all help is grately appreciated.
Kind regards.
Bartel02

Thanks for the information. 
Although this explains why things are different, it doesn't help to understand why I cannot export anything besides .mov.  If I go in and try to change those settings so it says its saving to MP4... again the rendering stops at 5%.  Is it no longer possible to share to mp4 directly from FCPX?
To give more information, when I begin the share process of an mp4 the background task bar jumps immediately to 5% but then just stays there.

Similar Messages

  • Help solve the problem after restor iphone 5 ios 7 asks email

    Help solve the problem after restor iphone 5 ios 7 asks apple ID
    I Forgot apple ID

    Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

  • My Late 2009 27" iMac i7 wake up problems after LION installed

    About 5 or 6X, My iMac has had wake up problems after I installed LION.  The screen wakes but the trackpad or mouse are frozen.  I have to do a hard shut down (pressing the power button) for system to work correctly.  When I power on the Mac, then everything functions.  NEVER had this issue with Safari!

    Exatly the same problem here with Lion on iMac 27" C2D late 2009.
    more discussion about the issue here: https://discussions.apple.com/message/15757182#15757182

  • MAJOR EXPORT PROBLEMS! PLEASE HELP!

    Hello. I hope everyone had a nice holiday. I'll try to be brief. I'm having a horrible problem with exporting my films.  I work on a PC. To me, that shouldn't matter, but here's what's been happening.  I shoot my films at 23.976 frames on the 5DMII and the 7D.  My film got into a film festival. They asked for a 720p mp4 file. OK, no problem. I went under H.264, I exported an HD File, with 23.976 frame rate and I checked both boxes for Max Render and I set a 2-pass. I exported and when I played the vid back through Windows Media Player, it felt fine.
    BUT, at the festival this past weekend, I was horrified to discover that my film, and no other films, was having a major sound problem. The audio was about half a second ahead of the footage, so they kind of looked like they were speaking correctly, but their dialogue would finish right before their mouths would. Super embarrassing. All I noted when I saw the tech booth was that they were using a mac laptop hooked to the projector, so I assume maybe it was quicktime they were running? Also, I believe they put all of the vids together as one file so it would run together as one block, but still, I believe most of the other films were shot at 23.976 frames as well, so that shouldn't matter.
    I went home, thinking maybe I just wasn't being diligent enough and I needed to really look at the sound. Maybe it was off. But I keep all of the temp tracks, the sound from the dslr, on track 1 and then just mute it. I unmuted and played both tracks, and there's no difference. No echo, no weird delays, they're both perfectly synched up.
    I've been having this problem for a long time but this was the first time that I REALLY could see the problem, probably because it was on such a big screen. Just my opinion, but I've found that most festivals are running MAC software and it seems like the vids I export seem to have an audio problem being played through mac programs. Another instance, briefly. I did a screening for a feature I edited. I exported an HD mp4 and put it on a friends MAC. The sound was off when we pre-screened it. I have a PC Toshiba laptop, I ran the vid through windows media player, and it felt much better, so we screened using my laptop and it went fine. But what does that mean?
    Has anyone else had this problem? It's not just festivals too. I have a subscription with Vimeo, but every short film that I put up there has some kind of an audio drift problem. It's always minor so some people see it and some people don't, but I'm certain the vids are fine on my timeline. Do I need to export using something else? A different setting? As a quicktime vid? That last question seems kooky since any tutorial I've seen is usually wanting h.264, so I just don't know.
    Please let me know if there's anything I can try or if you just have an opinion. Thanks very much.

    im sorry i cant seem to start a new topic PLEASE HEEEEEEEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPPPPP
    all of a sudden about half an hr ago my computer froze & went all spastic. i retsarted & now ALL MY SONGS ARE GONE FROM MY IPOD!!! I HAD 10 000+ SONGS HOW DO I GET THEM BACK!?!?!??
    please tell me theres a way. when i check the ipod itself it says 0 songs 0 videos but strangely my 87 photos are still on there. also when i reconnect it to the computer it says to restore its factory settings but when i go to update/restoe it says i have 10GB left (its a 60Gb video ipod) so i think the songs are still stored there but i cant access them or something please help me!!

  • Export problems after editing after effects videos

    Hello !
    I've done an animation movie where I created the scenes in After Effects. Every scenes have those settings :
    NTSC DV, 720 x 480, Pixel Aspect Ratio : D1/DV NTSC (0,9) and they all have been compressed with the animation compressor.
    I've imported all my footage in Final Cut and I did the editing.
    Now, I have some problems when I try to export my movie into a file. I don't know what settings is the best. The NTSC compressor seems to make things blurry. No compressor at all seems to make things too sharp (you can see "stairs" around the edges). You can even see a difference between the original footage in the Viewer and the footage in the Canvas. I sometimes use the de-interlace filter so the images won't flicker...
    How should I export my movie to have the best result ?
    Thank you !

    The preset in After Effects is NTSC DV, but when I export my footage, I use the animation compressor.
    I tried to export from After Effects with the NTSC compressor, and it looks blurry, just like my exports from Final Cut. I know that this compressor will do that... so I tried something else.
    In Final Cut, I looked at the sequence settings and they were set to NTSC compressor. So I created a new sequence but with the animation compressor option in the settings. I put some of my AE footage in the timeline. It looked good in the viewer and canvas. I then exported the movie to a file with the current settings and it looks good !
    So the problem was that I was not using the same settings. I didn't know I had to change the sequence settings, I thought I only had to change things when I export...
    Thank you for your help anyway !!

  • Import/Export problems after patching oracle from 9.2.0.1 to 9.2.0.5

    Hi, After I applied the 5 patch to oracle 9201 on Win XP the export utility has started to complain about
    EXP-00008: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    EXP-00024: Export views not installed, please notify your DBA
    EXP-00000: Export terminated unsuccessfully
    And after I applied catexp.sql script, it didn't fix the issue with export, the error message has become like this:
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    Can someone advise, what's wrong with it? With oracle 9.2.0.1 export worked fine, after upgrade to 9.2.0.5 it fails every time it gets to the table data export stage.
    Thanks in advise

    It seems that you have found an answer in other forum :
    Imp/Exp problems after patching oracle to 9205
    Nicolas.

  • I am having this Problem after I installed MSE!

    Hello,
    Yesterday, I removed Norton and I installed Microsoft Security Essential (MSE) Anti-virus. Just after that, I am having this issue with Mozilla. Since, I am Mozilla Lover, I always browse Net with Mozilla.
    Main Problem ->
    When I gone to my own site, I was not able to see some images, I mean some of those which uses CSS cropping technique. (I don't know how much you guyz will understand this :P)
    But it was working correctly with Chrome, but after I installed MSE, my browsing/downloading speed become very low in both.
    The following are some Pic, 1 of them are snapped chrome and 1 is mozilla..
    [http://i1137.photobucket.com/albums/n501/harshitpeer/chrome.png Chrome Snap Link]
    [http://i1137.photobucket.com/albums/n501/harshitpeer/mozilla.png Mozilla Snap Link]

    And when you called your phone carrier what did they say?

  • Graphic problem after Lion installed? Anyone else?

    After i installed Lion, ive been having problems with the graphics while playing world of warcraft ? [url=http://bildr.no/view/1020583][img]http://bildr.no/thumb/1020583.jpeg[/img][/url]
    Anyone know what to do?
    Thanks

    i have the same configuration and i've been having issues with Time Machine as well.

  • Fan  problem after Leopard install

    PowerMac Dual G5 - after Leopard install, fan between hard drive and optical drive revved up like the computer was going to blast off, faster and faster until I powered down by holding down the power button. Leopard seems to be working fine, but with the fan continuing to go at high speed at all times. I've tried reboot, reinstall, pull plug for a few minutes, remove CMOS battery, and zap PRAM, all to no avail. I haven't put the panel cover back on yet, and that may work, but I won't have time to mess with it for a few days and hope for some insight before I try that.Ideas?

    Problem went away. Must have been a ghost in the machine.

  • Apple ID problem after Mavericks install

    Hello Everyone,
    After upgrading to Mavericks I tried to read one of my books in ibooks, and after signing in with my apple id I received a notification with the following error "This computer is already associated with an Apple ID." The book was originally bought and downloaded on my iPad, but I cannot download them on my Mac. I also get the same error in iTunes when I try to play/download a song from the cloud.
    I managed to get the book after syncronizing my iOS devices, but I was wondering if anyone encountered this.

    Now that I think about it, this started happening after I installed iTunes 11

  • Need Help:I meet trouble after I installed Oracle10g in my Linux OS.

    After i installed Oracle10g Database in Linux OS in my PC,I can manage it from em .
    But when i reboot my PC,i found i can't connect the Database again,whether i use sqlplus or em.
    Why?Somethings i miss?But i install it depend on the documents download from the www.oracle.com.Here is my e-mail address:[email protected]
    thanks.
    Message was edited by:
    user493623

    On Linux/Unix Oracle does not start automatically at machine reboot. You have to create an autostart script to do that. See Re: Starting Oracle Databases on Startup of Server

  • Help system hang out after i installed new video card

    i bought a computer a week ago. and i bought a ati radeon 9250 graphic card (256MB pci). after i installed it, my computer loaded to windows fine, but wheni tried to do anything its frozen . i couldnt do anything
    here is my computer
    Processor Brand: Intel 
    Processor Class: Pentium 4 Processor 
    Processor Number: 631 with HT Technology 
    Processor Speed: 3.0 GHz 
    Front Side Bus: 800 MHz 
    L2 Cache Size: 2 MB 
    System Chipset: VIA P4M800 Pro 
    Memory Speed: PC2-5300 (667MHz) 
    Memory Type: DDR2-SDRAM 
    Installed Memory: 512 MB 
    Maximum Memory: 2 GB 
    Memory Slots Total: 2 
    Memory Slots Available: 1 
    Hard Drive Capacity: 250 GB 
    Drive Controllers: SATA-150 
    Rotational Speed: 7200 RPM 
    Optical Drives: Double Layer DVD SuperMulti Drive:
    Create a DVD+R DL at a maximum 8X Write speed
    Create a DVD-R DL at a maximum 8X Write speed
    Create a DVD+R at a maximum 18X Write speed or a maximum 8X Rewrite speed
    Create a DVD-R at a maximum 18X Write speed or a maximum 6X Rewrite speed
    Create a DVD-RAM at a maximum 12X Write speed
    Play a DVD-Rom at a maximum 16X Read speed
    Create a CD-Rom at a maximum 40X Write speed
    Create a CD-RW at a maximum 32X Rewrite speed
    Play a CD-Rom at a maximum 40X Read speed
    Card Slots: 1 x CompactFlash
    1 x MicroDrive
    1 x Memory Stick
    1 x Memory Stick Duo
    1 x Memory Stick PRO
    1 x MiniSD
    1 x SmartMedia Card
    1 x Secure Digital(SD)/MMC
    1 x xD-Picture Card
    Audio Channels: 6 Channel Audio 
    Video Chipset Brand: S3 
    Video Chipset: UniChrome Pro 
    Video Bus: AGP 8X 
    Video Integration: Motherboard 
    Total Available Graphics Memory (Vista): 128 MB 
    Port Connectors: 8 x USB 2.0 (4 on front, 4 on back)
    1 x Microphone/Headphone/Line-in (on front)
    1 x Parallel (on back)
    2 x PS/2 (on back)
    1 x Digital Audio In (on back)
    1 x Digital Audio Out (on back)
    1 x RJ-45 Ethernet LAN (on back)
    1 x RJ-11 Modem (on back)
    1 x Rear speaker out/Side speaker out/Center (subwoofer) (on back)
    1 x Microphone/Line-in/Line-out (on back)
    1 Video - VGA 15-pin D-Sub (on back)
    AGP Slots: 1 
    PCI Slots: 3 
    Slots Notes: 2 x PCI open
    1 x AGP open
    External 3.5 Bays: 2 
    External 5.25 Bays: 2 
    External Bays Notes: 1 x 3.5-inch open
    1 x 5.25-inch open
    Internal 3.5 Bays: 4 
    Internal Bays (Notes): 3 x 3.5-inch open
    Network Support: Ethernet (10/100 Mbps) 

    im using this one
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=1039&maincat_no=1&cat2_no=170&cat3_no=2

  • Major permissions problems after migrating to new iMac

    Hi, I am very new to this and need some help. Have been using a MacBook pro for the past year to synch iPods/iPads that are used within our school. Purchased an iMac and proceeded to migrate users/files etc. After migrating I have had major problems with iTunes.  My iTunes library is visible but I cannot synch any devices, have tried verifying permissions and fix permissions but to no avail. Any help would be very much appreciated.

    Did you instal the program again, or try to migrate it from the old system (not a good idea)? I would run the installer again and it should correct the problem -- the Proximity dictionary for English (and probably others) is apparently not installed correctly.

  • HP LaserJet 1000 problem after Leopard install

    Anyone else have a problem printing after the Leopard install?
    My printer and driver was recognized but I can't print. When I watch the print queue it say there are errors and fails.
    Since HP never made a driver for this printer, I was using a Zenographics driver that worked great. That is, until I upgraded.
    I unplugged the USB and power cords, and removed the printer from System Preferences. After plugging everything back in and adding the printer again, the printer seemed like it wanted to print, but still didn't work.
    Please help.

    Thank you for your answers. I was hoping someone would reply.
    HP LJ 1000 is a great printer and I figured a few people had to have one. It is unfortunate as this printer hardly ever needed the toner changed, and I used it as my main printer. I swear I only changed toner four times in the last five years!
    I looked everywhere for a driver and found nothing. HP said they had no updated driver for the Mac (as they told me a year ago, too) and they were not going to create one.
    My final solution was to give up my printer to a good neighbor for $50 for her pc.
    I researched printers from the Apple store and decided to go with the very Mac friendly HP Laserjet 1022:
    http://store.apple.com/AppleStore/WebObjects/EducationIndividualCustom.woa/94340 03/wa/PSLID?mco=CC919B84&fnode=home/shopmac/macaccessories/printers&nplm=TC976LL/A&wosid=gG2dihO9R0Mg29v6f901bEeWNf2
    Hopefully it will be a good printer. After returning the new toner I bought for the LJ1000, I thought Staples would have it in stock. However, after trying three different stores, it seems the best way to get a Mac-friendly printer is to go online.
    I hope I helped you out as well.
    Again, thank you.
    -NdP

  • Could Automator help photo org problems after the upgrade to iPhoto 6?...

    Yes, I'm another person that has had the organization of thousands of photos screwed up after paying for and installing the upgrade.
    After reading the numerous threads on this same topic i haven't seen an answer yet...Same as the others, after updating to iPhoto6 my simple, by date, file org is shattered.
    - Of the many proposed fixes, renaming rolls by date is not practical since many of us have photos on a single "roll" (download event) that span many different days. Breaking these original rolls up by date is impractical with thousands of photos.
    - Using the calendar view to navigate the photo library doesn't work because most of the photo dates aren't accurate or are simply missing from this view.
    Could the Tiger Automator be creatively used to help re-organize these photos?
    Can anyone confirm that Apple has acknowledged this problem and is working on a patch/fix for this obviously large scale problem? My pc advocate friends think this is hilarious after i've been bragging about my trouble free macs for the last 20 years.....
    Any help would be GREATLY appreciated!

    Go back to 7.6.1 at least.. do not use 7.6.3 firmware.. as it has wireless issues.
    You go back by selecting firmware update with option key held down.

Maybe you are looking for