Help! Making a Wireless Network between a PC and Mac and more.

I am trying to make a network between my powerbook and my fiance's pc, so we can share printers. I have an Airport Express and I bought her a Netgear Wireless PCI card. The PCI card is installed and has located the Aiport network. How do I get it to see the printer attached? Is Bonjour necessary? I'm downloading it via the Mac and then transferring the file by Zip because for some reason it wasn't downloading properly on the PC.
Also of note, we use dial-up to connect to the net so this network is again just to share the printers we have, and maybe files.
Printer sharing: I have my HP deskjet connected via a 4-port hub to my Airport. My computer recognizes the HP but when I connected the Lexmark 2250 it couldn't see it at all. Why is that? What can I do to fix it? I have the latest Lexmark Drivers.
How do I get my Mac to see the PC for file transferring, etc? I've been searching through apple's site for information and nothing is really helping me. I am gonna explode.
Any help would be greatly appreciated.
Thank you in advance.
Seth

Ok I got the PC to see my HP 940c wirelessly using Bonjour. However, I still can't get the Lexmark 2250 to show up on either the mac or pc wirelessly when connected to the hub? Is using a 4-port hub connected to the Airport express just not going to cut it for making a multiple printer hub?
I'd really like to do this plus make an network between the two computers.

Similar Messages

Establish a wireless network between Photosmart C4385 and a Mac

I have a Photosmart C4385 All-in-One that I'm trying to use wirelessly. I have a MacBook Pro running OS X 10.7.2. I have a ubee wireless router.
I keep finding information saying that I need to run the "wireless network setup wizard" but I can't find it. I tried to use the different diagnostic utilites that HP suggested but they were only for PC, but the printer came with a Mac that I bought a couple of years ago. I have a new computer now and I'm just trying to get it setup to print wirelessly.

Hello,
Thanks for the post. On this one, I would recommend the following steps pasted in the links below. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02911238&cc=us&dlc=en&lang=en&lc=en&product=365...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Unable to set up wireless network between macbook pro and Pixma MX860 printer/scanner

I am about ready to throw everything out the window. I have followed the advice given in an archived discussion on this forum, but I always get hung up just a few steps from the end when I don't get the window I'm supposed to get.
Supposedly, I'm to link the computer and printer initially with the USB cable, configure it, and then it's supposed to work WITHOUT the USB cable.
I've configured the printer in my MacBook Pro, but I'm supposed to "highlight the access point" (presumably my router) in the IJ printer window, and it isn't there.
I've tried running a LAN cable from my printer to my router. That doesn't work, either.
I'm running Snow Leopard (still a bit afraid of Lion).

I'm not familiar with your printer but from what you have said, can I ask the following questions:
Have you actually been able to print using a cable from from Mac Book Pro to your printer, or is this a new setup?
From my own experience with routers/computers/printers you normally have to pair the router to your printer/computer if connecting wirelessly, this involves pressing one or more buttons on the back of the router, then type in the very long security (WEP) keys printed on the bottom of the router.
Apologies if you're not presented with the same problems as I did, but at least it's a start!
Pairing of laptop computers and printers using wifi using the router is sometimes overlooked - look for the WEP keys/access codes and buttons on the back or underside of the router, write down the numbers and letters, and check out whether any buttons on the router need to be pressed!!!

Establish Wireless network between Cisco857W and Linksys AP

Hi
I would like to know if it is possible to establish a wireless network between Cisco 857W and others AP vendors.
The goal is to extend the Wireless network provided by the Cisco 857W to others vendors APs.
Thanks in advance for your cooperation,
MP

Hello,
Thanks for the post. On this one, I would recommend the following steps pasted in the links below. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02911238&cc=us&dlc=en&lang=en&lc=en&product=365...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

How do i set a peer to peer network between my iMac and windows machines?

I want to set up a peer to peer network between my iMac and Windows based computers in my house. I also want it to a wireless set up. Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

I'm trying to connect my MacBook Pro to Wifi using internet sharing
Why?
Just connect the MacBook to the same internet as your iMac.
MacBook > Wi-Fi router > Internet.
You are connected to the internet with your iMac.
iMac > Wi-Fi router > Internet
Why do you want to go MacBook (via Wi-Fi) > iMac > Wi-Fi router > Internet?

Running an Intel Mac on a Wireless Network with other Power PC Macs

I know changing the Airport to WPA encryption will allow an intel Mac with either Mac OS or WinXP OS to access the airport.
If you have powerPC Macs also, what encryption will allow both Mac (intel and powerPC) and WinXP to access the airport?
Right now either WEP for all Macas or WPA for intel Mac (Mac & WinXP).
Help
Mac Mini (Intel), iMac, eMac, iBook, G4, & Powerbook (all powerPC) Mac OS X (10.3.9) also 10.4+

Hi Sherwood!
If I recall correctly, an update to Windows XP (assuming you're using Windows XP) added WPA support to the existing WEP support. The same applies to Mac OS X.
Regardless, if both OSes are up-to-date they can use either WEP or WPA. But WEP and WPA should not be used at the same time for the same wireless network. Choose one and set your Airport first (create your infrastructure) and then set all computers to connect using that same security (add computers to your infrastructure). I suggest using WPA becuase it is more secure than WEP.
This link indicates when you can use WPA on your Mac and this link indicates when you can use WPA on your Windows system.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

Need help to find out link between process order and purchase order.

Hi All,
Need help to find out link between process order and purchase order.
We have purchase order, we can find out associated process order in MD09 (No Purchase Requisition found in Purchase order). When I tired to replicate this scenario with same material in system but not able to do.
Please suggest me what needs to check to get purchase order link to process order.. (this is not subcontracting )
Edited by: SAP PQ on Sep 26, 2011 5:24 PM
Thanks,
SAP PQ
Edited by: SAP PQ on Sep 26, 2011 5:24 PM

MD09 is pegging. In SAP pegging is dynamic, meaning that there's no fixed link between purchase order and process order in your case.
This is why you did not get the same result when you tried again later.
Such a link can exist only if you do direct procurement for the order.

HT1386 please help me to make synch between my computer and iphone , on the file tab it is not possible to click, thanks

my dear,
please help me to make synch between my computer and iphone , on the file tab it is not possible to click.
appreciate your help and thanks in advance.
regards
hesham

You can't
Apple has never approved a method to downgrade iOS
Allan

I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro. The TC is almost full. What is the best way/device to increase storage capacity?

I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro. The TC is almost full. What is the best way/device to increase storage capacity?

Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

Help setting up wireless network with Verizon DSL

I bought a MacBook Pro and an Air Port Extreme yesterday. I have an iMAC G5 from October 2004. I have Verizon DSL service and a Westell Series 6100 modem.
Bottom line --> I can't get the wireless connection to work.
I have successfully used a wired dsl connection with my iMAC G5. But, I tried to just disconnect the ethernet cable from my computer and put it into the Airport Extreme and that didn't work. I used the utility to set up the base station and the network, but I'm not sure if I did it properly.
I know a PPPoE is involved but I'm not sure of how to configure the system properly. I'm also not sure if the problem is with the configuration of the AirPort extreme or with my Verizon modem.
All I know is that I want to see a green light on that thing and not a flashing orange one.
Does any one have some instructions for setting up your AirPort Extreme using Verizon DSL? Has anyone else had similar problems? Thanks in advance!
MacBook Pro & iMAC G% Mac OS X (10.4.9)

Just finished solving this problem. I am not a strong tech guy, but I know that since it works for others it is just a question of poking and pushing. Anyway it was nine hours in the making...
My snow airport working with an airport express had been bullet proof with verizon dsl for a couple of years. I wanted to upgrade since I am now Intel mac and hit the blinking amber light.
I am only going to be able to give the big picture... The AEBS found and worked with all my computers from the beginning, so the problem became that the default IP Address and Subnet Mask were wrong and never automatically adjusted by the assistants.
Take your working plug-in ethernet connections or the working snow connections from the Airport Utility Internet Connect page. I used the manual configure process to access the info screens.
I copied all the numbers down, but I believe you only have to insert the IP Address, Subnet Mask, Router Address and DNS servers. I put "dsl.verizon.net" in the domain search box.
Go up to the IPv4 pull down menu and select manual and put in the numbers you copied. Then click Update. When the software returns control, the AEBS will still be orange.
Toggle the IPv4 to "using DHCP" Click Update.
This should bring the green light.
I think I then updated the Network Preference Pane, probably had to manually put in my wireless password again. Browser and mail program worked.
I think that was all. I may have had to repeat the toggle to make it stick, but I am operational for the last several hours, including the airport express, a G4 laptop and a Sony PC.
Hope this helps.
Rpbert

Can I create a portable ad-hoc network between an iPad and other wireless devices?

I have a iPad that uses a third-part app to connect to and read data from a wireless hard drive. This works great in my house over my local network. What I want to do is create an ad-hoc network to use in my car or other remote site to basically just allow the wireless connection between the two devices, with no internet connection. I have used an ad-hoc network in the past to sync data between my iPad and my iMac, so theoretically it should be possible, but I can't seem to find out how to do it using the iPad to create the network. Is there a support article discussing this? Has anyone out there tried doing this? Any help would be appreciated.

Thanks for the reply, but I must not have made myself clear. I'm not looking for internet or 3G service. All I want is a temporary network to share data over. I have lots of movies and videos stored on a wireless hard drive and I just want to be able to access them in the car while on trips or on vacation. It works in my house even when we lose our internet connection. The cable modem is off-line and the Airport Extreme light glows orange, but the wireless network still works. I guess that I could set up an iPhone as a hotspot and pay extra for a service I would only need sporadically, but I'm hoping that there is an alternative.

Help! Making a Wireless Network between a PC and Mac and more.

Similar Messages

Maybe you are looking for