Help making an old ATI Rage XL work

I have an old-ish server (from 2006-2007 more or less) that was using solaris until some months ago but was taken out of service.
It was running X with a very basic DE.
Today, I was trying to give it a new use, but I face the problem that I cannot manage to make the video card to work
lspci reports this:
05:06.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage XL (rev 27) (prog-if 00 [VGA controller])
And I installed xorg, xorg-apps and xorg-drivers but it does not seem to work auto-magically...
I tried installing the closed source drivers without luck:
When KDE is supposed to start, I get a black screen: No mouse even and the inability of switching to a text based console....
The graphic card is integrated in the motherboard..... I hope someone can at least point me in the right direction: It's nice hardware to be used with arch and it would be a shame letting it to get forgotten in a corner forever accumulating dust.
Any ideas would help.
Thanks!

Ok, I removed the vesa driver and updated the system, now I get this:
[ 10.371]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 10.371]
X.Org X Server 1.13.2.901 (1.13.3 RC 1)
Release Date: 2013-02-15
[ 10.371] X Protocol Version 11, Revision 0
[ 10.371] Build Operating System: Linux 3.7.5-1-ARCH x86_64
[ 10.371] Current Operating System: Linux MyArch 3.7.9-2-ARCH #1 SMP PREEMPT Mon Feb 25 12:04:25 CET 2013 x86_64
[ 10.371] Kernel command line: root=/dev/sda1 ro vga=773 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 10.372] Build Date: 18 February 2013 03:52:56PM
[ 10.372]
[ 10.372] Current version of pixman: 0.28.2
[ 10.372] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.372] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.372] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 26 08:33:30 2013
[ 10.411] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.411] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.436] (==) No Layout section. Using the first Screen section.
[ 10.436] (==) No screen section available. Using defaults.
[ 10.436] (**) |-->Screen "Default Screen Section" (0)
[ 10.436] (**) | |-->Monitor "<default monitor>"
[ 10.436] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 10.436] (**) | |-->Device "ATI Rage XL"
[ 10.436] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.437] (==) Automatically adding devices
[ 10.437] (==) Automatically enabling devices
[ 10.437] (==) Automatically adding GPU devices
[ 10.486] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.486] Entry deleted from font path.
[ 10.486] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 10.486] Entry deleted from font path.
[ 10.487] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 10.487] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.487] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.487] (II) Loader magic: 0x7fcc20
[ 10.487] (II) Module ABI versions:
[ 10.487] X.Org ANSI C Emulation: 0.4
[ 10.487] X.Org Video Driver: 13.1
[ 10.487] X.Org XInput driver : 18.0
[ 10.487] X.Org Server Extension : 7.0
[ 10.488] (--) PCI:*(0:5:6:0) 1002:4752:1002:8008 rev 39, Mem @ 0xfd000000/16777216, 0xfeaff000/4096, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[ 10.489] Initializing built-in extension Generic Event Extension
[ 10.489] Initializing built-in extension SHAPE
[ 10.489] Initializing built-in extension MIT-SHM
[ 10.489] Initializing built-in extension XInputExtension
[ 10.489] Initializing built-in extension XTEST
[ 10.489] Initializing built-in extension BIG-REQUESTS
[ 10.489] Initializing built-in extension SYNC
[ 10.489] Initializing built-in extension XKEYBOARD
[ 10.489] Initializing built-in extension XC-MISC
[ 10.489] Initializing built-in extension SECURITY
[ 10.489] Initializing built-in extension XINERAMA
[ 10.489] Initializing built-in extension XFIXES
[ 10.489] Initializing built-in extension RENDER
[ 10.489] Initializing built-in extension RANDR
[ 10.489] Initializing built-in extension COMPOSITE
[ 10.489] Initializing built-in extension DAMAGE
[ 10.489] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.489] Initializing built-in extension DOUBLE-BUFFER
[ 10.489] Initializing built-in extension RECORD
[ 10.489] Initializing built-in extension DPMS
[ 10.489] Initializing built-in extension X-Resource
[ 10.489] Initializing built-in extension XVideo
[ 10.489] Initializing built-in extension XVideo-MotionCompensation
[ 10.489] Initializing built-in extension XFree86-VidModeExtension
[ 10.489] Initializing built-in extension XFree86-DGA
[ 10.489] Initializing built-in extension XFree86-DRI
[ 10.489] Initializing built-in extension DRI2
[ 10.489] (II) LoadModule: "glx"
[ 10.556] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.574] (II) Module glx: vendor="X.Org Foundation"
[ 10.574] compiled for 1.13.2.901, module version = 1.0.0
[ 10.574] ABI class: X.Org Server Extension, version 7.0
[ 10.574] (==) AIGLX enabled
[ 10.574] Loading extension GLX
[ 10.574] (II) LoadModule: "mach64"
[ 10.574] (II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
[ 10.589] (II) Module mach64: vendor="X.Org Foundation"
[ 10.589] compiled for 1.13.1, module version = 6.9.4
[ 10.589] Module class: X.Org Video Driver
[ 10.589] ABI class: X.Org Video Driver, version 13.1
[ 10.589] (II) MACH64: Driver for ATI Mach64 chipsets
[ 10.589] (++) using VT number 7
[ 10.656] (II) MACH64(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.656] (==) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 10.656] (==) MACH64(0): Using EXA acceleration architecture
[ 10.656] (II) MACH64: Mach64 in slot 5:6:0 detected.
[ 10.656] (II) Loading sub module "int10"
[ 10.656] (II) LoadModule: "int10"
[ 10.656] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 10.671] (II) Module int10: vendor="X.Org Foundation"
[ 10.671] compiled for 1.13.2.901, module version = 1.0.0
[ 10.671] ABI class: X.Org Video Driver, version 13.1
[ 10.674] (II) MACH64(0): Primary V_BIOS segment is: 0xc000
[ 10.674] (II) Loading sub module "ddc"
[ 10.674] (II) LoadModule: "ddc"
[ 10.674] (II) Module "ddc" already built-in
[ 10.674] (II) Loading sub module "vbe"
[ 10.674] (II) LoadModule: "vbe"
[ 10.674] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 10.685] (II) Module vbe: vendor="X.Org Foundation"
[ 10.685] compiled for 1.13.2.901, module version = 1.1.0
[ 10.685] ABI class: X.Org Video Driver, version 13.1
[ 10.686] (II) MACH64(0): VESA BIOS detected
[ 10.686] (II) MACH64(0): VESA VBE Version 2.0
[ 10.686] (II) MACH64(0): VESA VBE Total Mem: 8128 kB
[ 10.686] (II) MACH64(0): VESA VBE OEM: ATI MACH64
[ 10.686] (II) MACH64(0): VESA VBE OEM Software Rev: 1.0
[ 10.686] (II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc.
[ 10.686] (II) MACH64(0): VESA VBE OEM Product: MACH64GM
[ 10.686] (II) MACH64(0): VESA VBE OEM Product Rev: 01.00
[ 10.687] (II) MACH64(0): VESA VBE DDC supported
[ 10.687] (II) MACH64(0): VESA VBE DDC Level 2
[ 10.687] (II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec.
[ 10.751] (II) MACH64(0): VESA VBE DDC read successfully
[ 10.752] (II) UnloadSubModule: "vbe"
[ 10.752] (II) Unloading vbe
[ 10.752] (II) UnloadSubModule: "int10"
[ 10.752] (II) Unloading int10
[ 10.752] (II) UnloadSubModule: ""
[ 10.752] (II) Unloading
[ 10.752] (II) MACH64(0): Manufacturer: DEL Model: a023 Serial#: 860305747
[ 10.752] (II) MACH64(0): Year: 2006 Week: 49
[ 10.752] (II) MACH64(0): EDID Version: 1.3
[ 10.752] (II) MACH64(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 10.752] (II) MACH64(0): Sync: Separate
[ 10.752] (II) MACH64(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 10.752] (II) MACH64(0): Gamma: 2.20
[ 10.752] (II) MACH64(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 10.752] (II) MACH64(0): Default color space is primary color space
[ 10.752] (II) MACH64(0): First detailed timing is preferred mode
[ 10.752] (II) MACH64(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.610
[ 10.752] (II) MACH64(0): blueX: 0.146 blueY: 0.069 whiteX: 0.312 whiteY: 0.328
[ 10.752] (II) MACH64(0): Supported established timings:
[ 10.752] (II) MACH64(0): 720x400@70Hz
[ 10.752] (II) MACH64(0): 640x480@60Hz
[ 10.752] (II) MACH64(0): 640x480@75Hz
[ 10.752] (II) MACH64(0): 800x600@60Hz
[ 10.752] (II) MACH64(0): 800x600@75Hz
[ 10.752] (II) MACH64(0): 1024x768@60Hz
[ 10.752] (II) MACH64(0): 1024x768@75Hz
[ 10.752] (II) MACH64(0): 1280x1024@75Hz
[ 10.752] (II) MACH64(0): Manufacturer's mask: 0
[ 10.752] (II) MACH64(0): Supported standard timings:
[ 10.752] (II) MACH64(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 10.752] (II) MACH64(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 10.752] (II) MACH64(0): Supported detailed timing:
[ 10.752] (II) MACH64(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 10.752] (II) MACH64(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 10.752] (II) MACH64(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 10.752] (II) MACH64(0): Serial No: 641806C53G9S
[ 10.752] (II) MACH64(0): Monitor name: DELL E177FP
[ 10.752] (II) MACH64(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 10.752] (II) MACH64(0): EDID (in hex):
[ 10.752] (II) MACH64(0): 00ffffffffffff0010ac23a053394733
[ 10.752] (II) MACH64(0): 3110010368221b78eeadb0a2574a9c25
[ 10.752] (II) MACH64(0): 115054a54b00714f8180010101010101
[ 10.752] (II) MACH64(0): 010101010101302a009851002a403070
[ 10.752] (II) MACH64(0): 1300520e1100001e000000ff00363431
[ 10.752] (II) MACH64(0): 3830364335334739530a000000fc0044
[ 10.752] (II) MACH64(0): 454c4c204531373746500a20000000fd
[ 10.752] (II) MACH64(0): 00384b1f500e000a2020202020200007
[ 10.752] (II) MACH64(0): EDID vendor "DEL", prod id 40995
[ 10.752] (II) MACH64(0): Using EDID range info for horizontal sync
[ 10.752] (II) MACH64(0): Using EDID range info for vertical refresh
[ 10.752] (II) MACH64(0): Printing DDC gathered Modelines:
[ 10.752] (II) MACH64(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.752] (II) MACH64(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.752] (II) MACH64(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.752] (II) MACH64(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.752] (II) MACH64(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.753] (II) MACH64(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.753] (II) MACH64(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.753] (II) MACH64(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.753] (II) MACH64(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.753] (II) MACH64(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10.753] (II) MACH64(0): BIOS Data: BIOSSize=0x8000, ROMTable=0x0114.
[ 10.753] (II) MACH64(0): BIOS Data: ClockTable=0x097C, FrequencyTable=0x0000.
[ 10.753] (II) MACH64(0): BIOS Data: LCDTable=0x0000.
[ 10.753] (II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x015E.
[ 10.753] (II) MACH64(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F.
[ 10.753] (--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
[ 10.753] (--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision 0x00.
[ 10.753] (--) MACH64(0): PCI bus interface detected; block I/O base is 0xB000.
[ 10.753] (--) MACH64(0): ATI Mach64 adapter detected.
[ 10.753] (!!) MACH64(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 10.753] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
[ 10.753] (==) MACH64(0): RGB weight 888
[ 10.753] (==) MACH64(0): Default visual is TrueColor
[ 10.753] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.753] (II) MACH64(0): Using Mach64 accelerator CRTC.
[ 10.753] (II) MACH64(0): Storing hardware cursor image at 0xFD7FFC00.
[ 10.753] (II) MACH64(0): Using 8 MB linear aperture at 0xFD000000.
[ 10.753] (!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
[ 10.753] (II) MACH64(0): Using Block 0 MMIO aperture at 0xFEAFF400.
[ 10.753] (II) MACH64(0): Using Block 1 MMIO aperture at 0xFEAFF000.
[ 10.753] (II) MACH64(0): MMIO write caching enabled.
[ 10.754] (--) MACH64(0): 8192 kB of SGRAM (2:1) 32-bit detected (using 8191 kB).
[ 10.754] (WW) MACH64(0): Cannot shadow an accelerated frame buffer.
[ 10.754] (II) MACH64(0): Engine XCLK 62.353 MHz; Refresh rate code 1.
[ 10.754] (--) MACH64(0): Internal programmable clock generator detected.
[ 10.754] (--) MACH64(0): Reference clock 157.5/11 (14.318) MHz.
[ 10.754] (II) MACH64(0): <default monitor>: Using hsync range of 31.00-80.00 kHz
[ 10.754] (II) MACH64(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
[ 10.754] (II) MACH64(0): <default monitor>: Using maximum pixel clock of 145.00 MHz
[ 10.754] (II) MACH64(0): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
[ 10.754] (II) MACH64(0): Maximum clock: 124.00 MHz
[ 10.754] (II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "800x600" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "400x300" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "512x384i" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1024x768" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "640x480" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "640x512" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "896x672" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "928x696" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "960x720" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "1400x1050" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "1400x1050" (width too large for virtual size)
[ 10.754] (II) MACH64(0): Not using default mode "700x525" (hsync out of range)
[ 10.754] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 10.754] (II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 10.754] (II) MACH64(0): Not using driver mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 10.754] (--) MACH64(0): Virtual size is 1280x1024 (pitch 1280)
[ 10.754] (**) MACH64(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz ezP)
[ 10.754] (**) MACH64(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)
[ 10.754] (**) MACH64(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz zd)
[ 10.754] (**) MACH64(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz ez)
[ 10.754] (**) MACH64(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz zd)
[ 10.754] (**) MACH64(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz ez)
[ 10.754] (**) MACH64(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 10.754] (II) MACH64(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz ez)
[ 10.755] (**) MACH64(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 10.755] (II) MACH64(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 10.755] (II) MACH64(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 10.755] (II) MACH64(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[ 10.755] (II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz zd)
[ 10.755] (**) MACH64(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 10.755] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz ez)
[ 10.755] (**) MACH64(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 10.755] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz ez)
[ 10.755] (**) MACH64(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 10.755] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 10.755] (II) MACH64(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 10.755] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 10.755] (II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[ 10.755] (**) MACH64(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 10.755] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz ez)
[ 10.755] (**) MACH64(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 10.755] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz ez)
[ 10.755] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 10.755] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 10.755] (II) MACH64(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 10.755] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 10.755] (**) MACH64(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[ 10.755] (II) MACH64(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz ez)
[ 10.755] (**) MACH64(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz zd)
[ 10.755] (**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[ 10.755] (II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 10.755] (**) MACH64(0): Display dimensions: (340, 270) mm
[ 10.755] (**) MACH64(0): DPI set to (95, 96)
[ 10.755] (II) Loading sub module "fb"
[ 10.755] (II) LoadModule: "fb"
[ 10.763] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.765] (II) Module fb: vendor="X.Org Foundation"
[ 10.765] compiled for 1.13.2.901, module version = 1.0.0
[ 10.765] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.765] (EE)
[ 10.765] (EE) Backtrace:
[ 10.771] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x58a0c6]
[ 10.771] (EE) 1: /usr/bin/X (0x400000+0x18df19) [0x58df19]
[ 10.771] (EE) 2: /usr/lib/libpthread.so.0 (0x7f88e4d4d000+0xf1e0) [0x7f88e4d5c1e0]
[ 10.771] (EE) 3: /usr/lib/xorg/modules/libfb.so (0x7f88e17e0000+0x33a1) [0x7f88e17e33a1]
[ 10.771] (EE)
[ 10.771] (EE) Segmentation fault at address 0x0
[ 10.771]
Fatal server error:
[ 10.771] Caught signal 11 (Segmentation fault). Server aborting
[ 10.771]
[ 10.771] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 10.771] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 10.771] (EE)
[ 10.796] Server terminated with error (1). Closing log file.
I don't know if feeling more confused or relieved that the error log looks to be more specific now... xD
EDIT:
I installed hwd from AUR and ran hwd -X
Two config files were created: xorg.conf.ati and xorg.conf.vesa
The .ati one didn't work, but the .vesa one did!!!!
Now I can at least run KDE and knowing the card has 8Mb of memory, I think I cannot get anything better..... No animations, but they are not necessary at all......
Changing vesa for mach64 on the driver section didn't work either.... the module loads, then unloads, like before....
Solved perhaps or do you have any more ideas?
Thanks!!!
Last edited by Xi0N (2013-02-26 08:13:54)

Similar Messages

Help making a list of missing/not working features

Since Adobe isn't talking why not help me make a list of features that aren't in Premiere anymore as well as one's promised for premiere CS4 but aren't there until it's updated.
No AAF
No single click save stills - AECS4 still has this
No more stream hinting in quicktime
HDV and AVCHD audio synch problems
Track Matte effect doesn't work
Media browser doesn't preview 24p correctly,
XML to Final Cut doesn't work
No OMF
No edit with Audition,
No 3rd party codecs - Cineform, Quicktime dvcproHD, Blackmagic, Raylight
Have to 'Interpret Footage' for 24p and 24pa
These just off the top of my head and not bug related issues listed here http://premierepro.wikia.com/wiki/Known_Issues

Here's another one from November 13th.
'Good morning one & all,
We've been cranking out code with the RED team, lining up for the same schedule.
Next week we'll ship a full native workflow for RED in Premiere Pro CS4, After Effects CS4 and even Encore CS4 (the RED to Blu workflow).
We've come a long way since the IBC demos --- more performance, more stability, more options, and tuning it to CS4 which is architected for 64 bit systems so that you can stuff it full of memory and get that smooth as butter experience.
Import your R3D files, change resolution on the fly, pop into full resolution for some detail work, drop all the way down to 1/16th for fast cuts on a laptop --- it's all there.
We're right up to 2K at full performance with the latest drop.
Oh, and did I mention that we're working the RED gang on exposing more control on the realtime de-bayering ? ... and of course with Assimilate on making it a full, clean, raw end to end workflow ?
Expect the importer to be posted with RED and linked from Adobe before Thanksgiving. Nov 20th is looking like the date (not that dates ever change).
Many thanks to our beta-testers ... you've been awesome turning things around and helping us shape the future.
It's cool.
It's Christmas come early.
Enjoy.'
Simon & the Merry Adobe Gang
Keeping you close to the lens

I need help making Shockwave Flash 15.0 r0 work again.

It was working fine earlier today, on Google Chrome. But for some reason it stopped and now I get a something asking if i want to stop the plugin because it is not responding. I have tried to make it work on my own following some of the things i found only, and on here Installation problems | Flash Player | Windows and Flash Player Help yet nothing. I really need this fixed ASAP.
Adobe Flash Player (2 files) - Version: 15.0.0.189
Shockwave Flash 15.0 r0
Name:
Shockwave Flash
Description:
Shockwave Flash 15.0 r0
Version:
15.0.0.189
Name:
Shockwave Flash
Description:
Shockwave Flash 15.0 r0
Version:
15,0,0,152
this is what shows up in chrome://plugins/
yet this the image I am supposed to be able to see does not show up
Please and thank you for your help

Please ask your question on a forum for the Flash Player

Getting Asus ATI 4870 to work in my Mac Pro. Not working. please help!

I read here on these boards that an ATI 4870 would work in an early model (in my case, 2006) Intel Mac Pro.
I jumped in hastily and bought the Asus branded card: EAH4870
I connected it, and nothing... did not work.
I do not think it is a Mac version of this card, perhaps intended to be used in a windows machine.
Questions:
- Do I need to "flash: this card to make it work in my Mac Pro OSX 10.6.3?
- Are there Mac drivers for this card? I can't find anything anywhere
- Basically, can I get this card to work, or do I need to PAY the extra $$$$ just to have a "Mac" version of this.
Keep in mind, I am not a techie, I need to do Work, not fiddle with this kind of stuff.. unfortunately, a software package crucial for a job is very finicky and works with only a handful of cards.. The 4870 is one of them.
I do not have dual boot, and no windows machines to "flash" or rework this card.
If you can help me to get this card to work, it would be MOST appreciated!!!

It is not a Mac version. It does not have the required EFI boot ROM needed to work on the Mac. Video drivers are contained in OS X. Either you have to have the card flashed (this is illegal) or buy a Mac version of the card.
If you aren't a "techie" then you don't have the hardware needed to flash the ROM nor know how. Because this site belongs to Apple we cannot help you with something that is illegal.

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. This was the early 90's and I've been trying to hunt it down

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. It was animated, 2D i believe. This was the early 90's and I've been trying to hunt it down. I think there was some kind of animal in it, a giraffe maybe?

Could you be thinking of Microsoft Home's "Fine Artist" for Macintosh, as shown in this Amazon.com listing? This program was bundled with the Performa series of Macs during the mid-90s.

In my dock there was this weird program called "tutorial". While throwing away this program I had to fill in my password. Afterwards I tried to change my password, but my old password doesn't work anymore. Who can help?

In my dock there was this weird program called "tutorial". While throwing away this program I had to fill in my password. Afterwards I tried to change my password, but my old password doesn't work anymore. Who can help?

What was this program for, or did you just assume it's something you shouldn't have and therefore arbitrarily decide to "throw it away"? Exactly how did you supposedly throw it away?
If you didn't change your administrator password, there's no reason it shouldn't work now, so that suggests you did something else, or changed it and then forgot what it was.
You can't recover that password; you can only change it. To do that, you would need to boot from your Snow Leopard DVD, choose your language, then choose Reset Password from the Utilities menu in the top menu bar.

I accidentally deleted my old fb app on my iPhone 3g. Now i cant download new fb app as it requires ios 4.3. How can i get old app that will work on my old phone. Any suggestions??? plz help!!!

i accidentally deleted my old fb app on my iPhone 3g. Now i cant download new fb app as it requires ios 4.3. How can i get old app that will work on my old phone. Any suggestions??? plz help

As already provided, if you don't have such in your iTunes library, on your computer, then there is no way to put it back on your phone. Apps are DRM protected, so even if you found a copy somewhere, you wouldn't be able to use it.

I have new MacBook Pro with OS 10.10. My MAIL program was working but suddenly won't recognize my VERIZON FIOS server. FYI, the MAIL programs on my iPAD and old iMAC continue to work. No answer yet from Apple Support HELP!!!

I have new MacBook Pro with OS 10.10. My MAIL program was working but suddenly won’t recognize my VERIZON FIOS server. FYI, the MAIL programs on my iPAD and old iMAC continue to work. No answer yet from Apple Support HELP!!!

Additional Information.
On my Mail Accounts setup it was set to "verizon.net" on incoming.
Now it faintly reads, "incoming.yahoo.verizon.net"
This came up automatically .... I did not do it and I cannot change it

HT201303 Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please

Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please ..
<Edited By Host>

These are user-to-user forums, you are notalking to Apple here - I've asked the hosts to remove your email address from post.
Are you not able to log into your account and change your account details e.g. via Store > View My Account on a computer's iTunes ?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

Hi there soulboycraney,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
-Griff W.

HOWTO Configure this $+%#& ATI rage Mobility 9700?

Hi all !
I bought a wonderful laptop. all works great instead of WiFi and my ATI rage mobility 9700.
for the wifi issue, I have time but I need my ATI Card 'cause I now writing openGL application.
This is what I did :
-- pacman -S ati-drivers and pacman -S ati-drivers-module-kernel26
-- I Configured xorg (I lanched fglxconfig (or something like that) and I copy in my xorg.conf the change.
-- I added fglx in my rc.conf
-- No problem when launching X
BUT :
-- mplayer doesn't play in full screen any more
-- xine doesn't work any more
-- And I do not have acceleration (foobillard loaded but he's verrrry slow)
-- But I can write OpenGL application if they are not accelerated.
the problem is : I need xine or mplayer and I want to play game :-p
What can I do to configure this ATI card ?
Thanks for advance,
Namlook :-(

ibeRtus;
You have been kind to attempt to help this old man (79) with fine suggestions but they haven't provided a solution to my problem.
I have just finished reading the forum Documentation Discussion...ATI Radeon &Kernel2.6 -Updated.
This forum post has 208 replies, 14 pages and 29,564 views and its all about the ATI fglrx install.
I have generated an observation of this mayhem, which states that one must hand-make one's own kernel(no stock kernel will work with the "fix"). This observation is listed in the NOOBIE forum.
I do expect that the ATI fix will be necessary in the next pacman -Syu kernel download as well.
I am sending my ATI cards back to ATI in disgust. Archlinux is from Canadians and ATI is from Canada!!!! Doesn't speak well for ATI.
I am trying everything that applies to kernel2.6.10 in archlinux0.7CD install and find no reference to that install with respect to ATI modules.
My best advice is to dump ATI and I am taking my own advice!!!!
Thanks much for your suggestions.
I did try your suggested hyperlinks and reported the same errors occured.
I am looking forward to a better video experience with a new video card!

Questions regarding ATI Rage 128 Pro graphics card in Sawtooth

Hi, i was checking on the web regarding the specs of my Sawtooth and stumbled upon this page: http://www.everymac.com/systems/apple/powermacg4/stats/powermac_g4_400agp.html
My Sawtooth comes with the ATI Rage 128 Pro graphics card. Its indicated the max resolution support is 1920x1200. I was wondering if it is able to support resolution 1680x1050 for wide monitors like the Samsung 205BW? Have anyone tried using a wide screen monitor with the Rage 128 pro card? Does it work well?
I'm not a gamer and i don't intend to upgrade the graphic card. (Though it would be nice to get my hands on the a Radeon 8500 or 9000.) I mainly do graphic work, and currently using a Samsung 740B monitor set at 1280x1028 resolution.

Hi, I posted the exact same question in another forum, and i was directed to this link: http://forums.appleinsider.com/showthread.php?t=58395
So i guess it does work. Though maybe, to a certain extend, like mentioned by one of the forum members:
"My old Sawtooth 400MHz G4 had an ATI Rage 128. It drove my 20inch Apple Cinema Display (the current design) with DVI. Not the best graphics, but it could do it, and without any hacks too..."
Hope this helps with anyone having the same questions... : )

Help making a Install USB of os x 10.4.6. for my Macbook 1.8ghz

Hi,
I need help making the USB install of os Tiger.
The drive is having trouble reading the install disc I own so I am trying to make a USB install of it.
I wantto install from the usb not install to it to be clear.
Things I have!
X1 8gig sandisk flash drive
1 Macbook white 1.8 ghz Intel
1 Pc with Macdrive 7
1 Install disc that seems to have trouble being read in the drive > few marks on the disc and the mac DVD drive make lots of noise reading it but
It will go to Disk utilities.
Seems to be a bug in Tiger and restore doesn’t seem to work as in I can’t drag and drop a source to the restore the DVD to the flash drive.
I already tried only 1 time to copy the DVD to the formatted flash drive using Macdrive and it read it as a bootable drive but the apple simple came up
And then I got a the error (Can’t find driver for this platform error APCH or something like that.
I have a torrent download of OS x 10.4.6 as well just in case some files are corrupted > I own the disk so it’s not illegal.
I am new to mac but long time user of PC.

Ok ..you need another Mac to make this work!
you just use another mac even a old one like g4 to make a restore to a flash drive that you have formatted and verified.
Bye
Sam

ATi Rage 128 PRO with DVI adaptor

I got a PowerMac G4 with Ati Rage 128 Pro which has a VGA and a DVI port on it
I would like to know if the DVI port going to work with the Apple DVI to Video adaptor?
I know the postage of the adaptor said it is only for PowerMac G5 and Mac mini but is there any differences between the DVI port on the ATi Rage 128 PRO and those on G5 and Mac Mini?
Is there any other solution that I can output the display to a TV with s-video or RGB?
Thank you so much!!
Cheers,
Lawrence

I got a PowerMac G4 with Ati Rage 128 Pro which has a
VGA and a DVI port on it
I would like to know if the DVI port going to work
with the Apple DVI to Video adaptor?
I know the postage of the adaptor said it is only for
PowerMac G5 and Mac mini but is there any differences
between the DVI port on the ATi Rage 128 PRO and
those on G5 and Mac Mini?
It's not the port, but the card that matters. The conversion to video is done by the card. The adapter just sends the output to the correct pins. I think the only cards that work are the recent ATI cards. Yours is probably too old. ATI's web-site doesn't have any information on it.
Is there any other solution that I can output the
display to a TV with s-video or RGB?
You can get a newer graphics card or use a VGA to Video converter.
<http://www.ramelectronics.net/html/PC-TVvideoadapter.html>
There are other, cheaper, ones.

Help making an old ATI Rage XL work

Similar Messages

Maybe you are looking for