Help making stereo track two mono tracks

I imported a stereo aiff with dj cuts on the left side and the music in the right side. I copy/converted the file and when saving as a wav I selected interleaved to split and added to the bin. I then had a L and R version. Both files play a mono version of left and right together. I drag the L into arrange and it has a little stereo symbol on it and plays both sides only in mono.. I also tried saving the audio as a split file and the same thing happened. I remember in 7 I did it really simply with a couple clicks. Going crazy with this simple task. What am I overlooking?
thanks

Yes, there is a clever way of doing this but I can't bring it to mind at the mo.
However, a slightly less clever but still quick way is as follow:
Make the Output channel mono (right hand of the two channel mixers in the channel strip area)
Pan your music track hard left and bounce
Pan your music track hard right and bounce
This uses the fact that the pan knob on a stereo is a balance control, not a panning control.
Pete

Similar Messages

Split Stereo to Two Mono Tracks - Need Help

We're having trouble with STP working with two non-stereo tracks.
We have footage that we're editing in Final Cut Pro that was captured with two separate mics providing the audio. (A wireless lav and a shotgun.) The sequence is set up with two mono tracks.
When sending the project to SoundTrack Pro, it's opened up as a pair of stereo tracks. We cannot find a way to edit just one of the tracks without it affecting both at the same time.
How can we separate the tracks so they can be tweaked individually and then sent back to Final Cut Pro?
Thanks for any help you can provide.

...and when doing that, make sure when you export, you don't fall over one of the many bugs in STP:
You will probably find that the clip with the right channel selected actually plays the left channel after being exported (sound fine on the timeline - problem only on the exported file).
The solution is to
1) duplicate the stereo file and place on new track (as suggested)
2) select left channel on first clip (control/right click the file)
3) select second clip and swap the L and R channels around (Process-> swap channels)
4) select left channel on first clip (control/right click the file)
Oh the joys of STP!

Making two mono tracks from one stereo track?

I've used the M-Audio MobilePre USB device to record vocal and guitar at the same time. In GarageBand, this inputs as one track, with guitar on the left channel and vocal on the right.
I'd like to separate this one stereo track into two mono tracks for further mixing and editing.
Any ideas on how to do this?
Thanks!

therealkenrg wrote:
I'd like to separate this one stereo track into two mono tracks
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

Stereo -- two mono tracks

hello!
I had a question about importing a stereo track. I'm in a stereo multitrack right now, and open a stereo track in that, but
I'm still not sure how to split the stereo track into two mono tracks.
Right now it's just playing on the Left side of the headphone. How do I get it so that there are two tracks - one on top of the other?
Help?
Thank you for bearing with my training wheels here!
Best,
Trail

trailmixalot wrote:
hello!
I had a question about importing a stereo track. I'm in a stereo multitrack right now, and open a stereo track in that, but I'm still not sure how to split the stereo track into two mono tracks.
I'm not sure why you want to do this. If you put a stereo track into a stereo session, then it will play in stereo. If you want to alter the relative left and right levels of the track, you use the Pan control in the mixer. If you can't hear both channels, then you need to check the mixer's master output options (where it says Default output at the top) and make sure that you have a stereo option selected - if you don't have this selected properly, you'll definitely only hear one channel.

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

Convert two mono tracks into one stereo?

I've imported a clip from my DV camera into Final Cut. For whatever reason, the clip audio is two mono tracks rather than one stereo track. Is there a way for me to convert this to a stereo track after the import?
Thanks very much,
Greg
G5 Dual 2.5 GHz Mac OS X (10.4.6)

Select both clips in the Timeline, then go to Modify->Stereo Pair (Option L). But if both clips contain the same audio information, it won't really be stereo ... just two tracks panned left & right.
If you want the audio to come in as stereo when you capture next time, make sure that you have the Capture settings for the audio set to "stereo."
-DH

Two mono tracks - one stereo

How could I join two mono tracks (wav pcm) to one stereo without quality loss using ST Pro 2.0? If there is no good way to do this, could you recommend something, that can. Thanks

Not sure what you mean by joining 2 files, but if you export as the same bitdepth and samplerate and leave the faders at 0 VU there shouldn't be any quality loss.

Joining two mono tracks

How do I join two mono tracks to create a stereo track? Somehow when I exported my project from FCP, the stereo music clip ended up as two mono clips... Instead of showing up on track A7&A8, they show up individually on track A7 and track A8, which makes changing levels and keyframing a pain!
In the same vain, how do I split a stereo clip into two mono clips?
thanks in advance!

Yeah, too far in on my STP to go back to FCP and re-export. Did find, however ctrl-clicking on the clip, and selecting channels that way to be of help.
Thanks for the reply!

Two mono tracks

I think I may have a blind spot, but here goes...
I'm attempting to export an audio clip into Soundtrack Pro, but am unable to because I either recorded/captured the audio as two mono tracks (L & R). Is there a solution to editing the audio in STP, such as creating a stereo track? I'm not especially proficient in sound editing (as my post suggests), but I'm assisting on a project that needs the noise reduction feature in STP badly, and due to the track settings.
Suggestions, comments?

hi there,
Select your clip in the sequence and hit alt+l.
Then you can use the sent to soundtrack pro function, wich you can find under File, sent to.
good luck!

Importing Stereo File to Two Mono Tracks?

I have a stereo audio file. I'd like to put it into GB2 with one side of the stereo file as one mono track and the second side of the stereo file as a second mono track.
Is there any way to do this?
Thanks,
Leon

Leon, Here is a file explaining what Monomaker does.
Monomaker is a simple mono-merging and stereo-recentering utility plugin.
You can use the mono merge parameter to progressively merge your stereo audio channels into a single mono signal. Turning mono merge all the way up to 1 will make your sound completely mono. Turning mono merge all the way down to 0 will leave your audio unaffected.
You can then recenter your signal using the pan parameter. The panning is equal power (meaning that as you move further over to one channel, sound from the other channel is copied over to the first channel in order to keep the total volume consistent).
Also, in case it's useful, you can re-route the 2 input streams in a variety of ways by using the input selection parameter. "Left-right" means that everything is normal, "right-left" means that the left and right streams are swapped, "left-left" means that you lose the right stream and get the left stream copied to both inputs, and "right-right" means that you lose the left stream and get the right stream copied to both inputs.
Monomaker's signal path is input selection first, then mono merge, then pan.
I have just downloaded it myself and have not looked at it yet. I apologize in advance for not checking it first before posting it. It may or may not help you, and I do not know if it works in Garageband.
Here is the site I got it from
http://smartelectronix.com/~destroyfx/audiounits.html

Two mono tracks to create a stereo tracks

I have a series of piano music a cousin made, but it is all mono. Is there anyway to double the mono track to make a stereo track for CDs?

Yes, you can fake a stereo recording. Duplicate the track, option-drag the region into it, then offset it slightly from the original, and finally pan one track left some, and the other right some.
--HangTime [Will Compute for Food] B-|>

Stereo to individual mono tracks?

GB doesn't seem to be able to split out a stereo sound file to left only mono and right only mono. I've gotten around this issue by creating a copy of the file and panning one track left and the other right. Selecting Mono channel 1 or 2 input in Info just merges the both tracks together into one mono track (for some reason), panning just sends the combined signal to the L or R. This solution is fine while editing in GB, but is bad for the final output where not only would I like to preview the combined audio tracks to set levels, but also export them so that the left channel material is on both tracks of the final stereo file. Here's what I'm dealing with so there is no confusion. I am e-mailed a stereo file with vocals on L and temp music on R. I replace the temp music with several new options. Then I want to export the new mixes back to a stereo file with vocals centered to send for previews. GB does not seem to provide e with a way to do that. In other words, there does not seem to be any way to get the L channel of a stereo file to the center of a new stereo mix without also combining it with the old unwanted R channel material. I'd love to find a way. One solution would be to flip the L/R orientation of the copied track and play the vocals back panned respectively on two tracks, but that's also something that seems beyond GB's capabilities. So there's a new one ... how to flip the stereo field of a track, which would be an easy fix to this problem ... I'll post on a separate thread.

One way to do it would be to
1) pan the stereo track full left, and export.
2) set iTunes' prefs to convert to a MONO AIFF file, do the conversion
3) drag the new file into GB.

Help trying to bounce a mono track in place with autotune plugin

I am trying to render a vocal track which has an Antares Autotune plugin by using the bounce track in place. It works but no matter what I try, the new track is being created in stereo. The origional track is mono. What would I be doing wrong here? Thanks
James

Ah, Thank you, so you are saying that if I uncheck the Volume and Pan automation checkbox it should work. Maybe that's it then. My origional channel strip and regions are mono. I will try this and see what happens. I also noticed I don't have the last logic upgrade. I will also be upgrading. Thanks
James

Stereo to 2 mono tracks conversion problem

The problem I'm running into is that once i've split the stereo track into 2 mono tracks, and bring the one mono track back into logic express to use, it still recognizes plays as though it's a stereo track.
The stereo track that i'm using basically has the music on the left side and a metronome on the right side so we can use it for backtracks through an ipod in a live setting.
I've also ran into a similar problem after i edited some audio tracks I was using in a sample, after i edited it and brought it back into the proram, it didn't want to recognize the origional track that i had...
has anyone else ran into this or knows what i'm doing wrong?

Is this possible in iMovie 9?
Yes, it is.
In iMovie choose Share>Export to QuckTime. Choose Export: Sound to AIFF then click the Options button.
From the Channels dropdown menu select Mono. Click OK and then save the file to the Desktop.
Detach and delete the original Project and drag in the newly created file and place it on the video in the timeline so it imports as a connected clip and not just in the background.
Matt

Help making stereo track two mono tracks

Similar Messages

Maybe you are looking for