HELP Managing Displays, iDisplay, HDMI

I have two problems
#1 I installed iDisplay for my iPad and since even after uninstalling the software i cannot get the display to "disapear","go away","remove it" from the display preferences pane.
The above is causing a problem when I connect my macbook pro to my LG HDTV via a third party Mini Display > HDMI adapter... my mac sees three displays which well makes things complicated.
I want to "Remove" the titled VGA display from the macbook and be able to simply connect the macbook to the HDTV to watch movies. I am also under the impression that with the new 2010 macbook pro refresh that the mini display will carry sound. do I have to have a particular setting to make this occur ?
PLEASE HELP

OK -- I found the answer to my question on searching some more on these forums (thanks folks).
What you need to do is to run the vendor's uninstall dmg. It isn't enough to just delete the iDisplay application from your mac.
Go to http://www.shapeservices.com/en/products/download.php?product=idisplay&platform= iphone
download and run the uninstall dmg and the phantom display will disappear.

Similar Messages

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

Managing the Help Screen display location and TOC frame width

Is there any way I can set how the Help is displayed when it first opens? I want to force it that the TOC frame is a certain width so the text is displayed properly always in the same way.

I think you will find the answer here.
http://www.robowizard.com/RoboWizard/NewProject.htm#Downloads/Skinny_on_Skins.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

No sound via mini display to HDMI connector

Hi all,
I have the i7 8G ram version of the X1 Carbon (UK version) and love it. The only issue I have with it is in relation to the mini display port. I use a lot of HDMI equipment so immediately bought the mini display to HDMI connector from Grifin, see http://store.griffintechnology.com/video-display-converter but whilst video exports fine no sound is being output via the HDMI cable and end up sound via the X1 speakers which are great for personal use but useless in a large room full of people.
I already contacted Griffin support and they quickly referred me to Lenovo.
All help much appreciated.
Ben
Solved!
Go to Solution.

BenEadir,
When you have a video or sound file playing, go to Control Panel, Sounds, Manage Audio Devices.
Then when you are in Manage Audio Devices, you will se a list of devices and the external device/TV your mini display port is connected to as one of the options. Just choose the one you want and set it as your default audio device and the sound should automatically go to the selected device.
Let me know if this works for you.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others.

The Best Mini Display Port HDMI Adapter?

I am looking for recommendations on a good Mini Display Port HDMI Adapter for my Macbook Pro 2011 Sandy Bridge. I have gone through about 4 adapters in the past year due to the adapters become unresponsive after 2 or 3 months. I use my Macbook heavily on external monitors for my work (averaging 7 hours or more a day between various monitors).
I can rule out the HDMI wire itself not being the cause of the problem but the adapters have been a huge miss and drain on cash this year. If anyone who is also a heavy user can point me in the direction of a durable adapter I would be very grateful.

I always recommend monopriice.com for cables and adapters.
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
But all these adapters are in the form of "pigtails" and no matter where you get them the strain relief and the cables can fatigue and break from constant bending or pulling (doesn't help your macbook socket any either).
Maybe you should order a bunch. They are cheaper that way at monoprice.
Another possibility might be you trying a mini displayport to HDMI cable. No adapter.
Kanex Mini DisplayPort to HDMI Cable with Audio Support (10 ft.)
But of course you could get about 6 adapters for the price of that one cable!

Why does my screen turn blue and freeze every time i try to plug in my 'mini display to hdmi' cable into my thunderbolt port in order to use an external monitor?

why does my screen turn blue and freeze every time i try to plug in my 'mini display to hdmi' cable into my thunderbolt port in order to use an external monitor? it only works if i turn the computer on with it already plugged in.

Do you have gfxCardStatus installed? Is your monitor set to "Integrated" or "Discrete". You want it set to Discrete to drive the external HDMI display.
Try resetting the PRAM and SMC
<About NVRAM and PRAM>
<Intel-based Macs: Resetting the System Management Controller (SMC)>
Are you sure you have a good miniDisplayPort to HDMI cable?
Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

HT202801 Cannot connect 2nd Thunderbolt Display or HDMI TV

Hi,
I can't seem to get my 2nd Thunderbolt Display or HDMI TV to work or be recognized on my MacPro. I do have my primary Thunderbolt display working. I went through the setup options that was on the how to article to set it up, and still nothing. Under About this Mac, it only recognizes the primary display as well. Any suggestions? Thanks

When I unplugged my primary monitor, the second one did not come on. I did go through all of the thunderbolt ports with the primary monitor and all of them had a signal to it. I unplugged my second displays power and plugged it back in, then plugged it back into the MacPro and it came on. Now if I can only figure out the HDMI tv signal I will be all set. Thank you all for your help.

Why does the Adobe Help Manager not close?

I'm not sure what the "Adobe Help Manager" (silly name) is. I notice it as an open application in my toolbar (Windows 7) but you cannot close it. It just stays there. Only goes away when I've restarted my system. Any ideas or comments?
Generally speaking, I'd like to comment that many of the current Adobe programs (including CC) are not nearly as intuitive as they should be. One wastes quite a bit of time trying to figure out how to accomplish rather obvious functions. Usually will have to go online to find an answer. Should be more obvious and clear. The interface of CC (for uploading work files) seems a "clean" design. Yes, clean... and unintuitive.

It's been weeks since I've used the file upload 'cloud' function of Creative Cloud, but I do recall I had to seek out numerous youtube videos, as well as some from Adobe's site, to try and figure out how it worked. Dragging and dropping seemed like a very obvious function, but you have to select: Actions: Download, etc. etc. It's a clunky, dispiriting interface.
So... I just started using google drive instead. I can quickly drag and drop. I work on a PC and a Mac and don't have a shared drive between them (due the usual platform issues) so I like uploading to a cloud server and transferring between the two machines that way. Very nice to compare how the two different systems are displaying an html doc or a photoshop file.
While the wind is at my back, I really like CC as to the software options, but it is a very daunting experience to consider learning new programs. It's taken me fifteen years of work to be as proficient as I am with PS (as a photographer and designer). I still find Dreamweaver very difficult and obscure in so many ways. I'm sure that's why you created Muse... but I will not take the time required to learn and new program. It's just a face. Remember in the Matrix when you would learn a huge amount of technical knowledge just by plugging into something? That's what we need (ha ha).
Now that Adobe is doing away with the distributive disc system for software programs, perhaps the next great leap is the discontinuation entirely of massive software progams themselves. Have no idea how this would happen, but I think patience is coming to an end for learning huge new software programs. Seems like such a relic of the past now.
Wish Adobe would bring designers more into how their programs work. They all seem to be designed by software engineers, and thus the truly disheartening style of the menues, opening into dozens of submenues, basements, dark vaults, etc. etc. The Adobe interfaces are all uniform now, but it's an old look that goes back almost ten years. Hope the creatives can soon lead to a new approach.

How to manage displaying buttons in appl toolbar in trans. XK02 - vendor m

Hi,
how can I manage displaying customer buttons in appl. toolbar in trans. XK02 - Vendor master data. I create new screen and I would like create button on first standard screen but on the customer - new screen i would like to have another button. I would change button on toolbar but use only one pf-status. How to dynamically change button in toolbar?
Thanks.

Hi:
Could you plz take the reference from
http://help.sap.com/saphelp_erp2005/helpdata/en/11/ba74412cba127de10000000a155106/content.htm
Regards
Shashi

Adobe Help Manager "No adobe products are currently installed"

Nevertheless I have installed:
. Windows 8 Professional 64 bits English UK
. Adobe Production Premium CS6 English
. Adobe Acrobat Standard X English
. Adobe Dreamweaver CS5.5 French
. Adobe Photoshop Lightroom 4
And when I launch Adobe Help, Adobe Help Manager tells me "No adobe products are currently available".
Does anyone can help me, please?

I have also major trouble with this new help system. I'm trying to deploy it in a big locked-down enterprise environment. So what I want to do is to make help only available offline (when users press F1 they don't get bothered with internet connection and other pop-ups, but instead a simple offline help file opens, like in the old days). So I updated to the most recent help files and selected "Display Local Help content only" in the Adobe Help Manager. Also I selected "Manually update my locally stored Help content." (I did all this with a local admin account)
Then when I log on with a regular end user account, and I open for example InDesign CS6 and then press F1, I get an error from Acrobat Pro upon opening the help file "Access denied". So I searched for that help file and it turns out that those help files are stored in c:\documents and settings\all users\documents\adobe\ I don't know what the policy is in other big companies, but in the case of my client (Electrabel GDF SUEZ) that directory is locked down. So my first question is: how do I change the location of the offline help files?
Ironhide001: maybe your problem is also access-related?
Second question is: how do I turn of pop-ups from Help Manager saying new help content is available for download, as our end users can't download/install it anyway??
Thanks a lot for your swift feedback Adobe, I have to urgently finish my documentation to describe the setup process because of deadlines.

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

Mini Display to VGA adapter stopped. The Mini Display to HDMI is still working fine. How´s that possible?

The mini display to VGA adapter had stopped, whinle the Mini Display to HDMI keeps working fine. The minid display to VGA adapter was replaced and the VGA cable as well, and the problem is the same. This test was made with two diferent monitors with VGA entries. How´s that possible to happen? Is that a configuration trouble in the MBP?

The Apple´s customer support gave us the solution for this problem:
SMC reset
PRAM reset
The VGA adapter return to work properly aflter this procedure.

Mini Display to HDMI adapter causing screen to go white/ gray

I recently purchased a mini display to hdmi adapter to hook my macbook pro up to my samsung led tv.
At first it worked great but after a few mins of inactivity both screens would go white or light gray and the macbook was totally unresponsive.
I pressed buttons, moved the mouse and nothing….I had to hard shut off and then restart the macbook to get the screens to come back up. I thought it might have been just a glitch but then it happened 2 more times all within the span of 2-3 hours. (keep in mind this is the first time ive ever used this adapter and have had no prior issues with my macbook)
I have no idea what could cause this type of issue.
Any suggestions or ideas on what could cause this? is it my settings or my computer?
I looked up the manual for my macbook online and my settings match what it says they should be… Im at a loss.
Any suggestions would be greatly appreciated. Thank you.

* my connection is macbook pro - mini display to hdmi adapter - hdmi to hdmi cord - Samsung LED tv.

HELP Managing Displays, iDisplay, HDMI

Similar Messages

Maybe you are looking for