Help - Manual Podcast transfer doesn't work

New owner of a Macbook Pro and iPod Nano, so sorry if this question is easy.
I set Podcast transfer to Manual, but when I drag podcasts onto the iPod, sometimes, nothing happens. Other times, I can transfer 1 or 2 podcasts, but that is it. I am getting close to being full (within 200-300MB), but should still have room for more short podcasts. I wonder if I haven't set up the Manual Transfer settings correctly.
I have the Summary tab setting to Manual, and the Podcast tab settings are unchecked from Synch. Is there anything else necessary? Any idea why the Podcasts won't transfer?
Thanks,
Colin

Try enabling disk mode.

Similar Messages

Error: wireless media transfer doesn't work

Good day.I have a problem on my Sony z Ultra. It can not make a wireless wi-fi connection with my PC. A few times i have connected my phone with PC wireless, but then it seem to be that I have something spoiled. Now PC tell me that "it isn't possible to coordinate device parameters with this system"What can I do in this situation?

Hey guysHave you read what the gentlemen above wrote?wireless media transfer doesn't work....not usb cable connection does not work.!!! I have the same problem.Can you please help me with it? Win7Pro64bit, Sony Experia Z1 compactI follow all the steps as given by the phone, it even says, the devices are pairedbut when I want the devices to connect, it just hangs and then gives me message "It isn't possible to connect to [yourpc]" Can you please give me some troubleshooting steps?What to check, where to look, how it works, links, articles, anything? please Thank you Hugo

Self-assigned or Manually Assigned IP Doesn't Work.

I've got a network of four Macs in my house, using a wireless router from Verizon. This network has been working fine for at least a year. For the last week, though, my MBP can't access the internet or see other computers. My router recognizes the MBP and the MBP shows full bars for the wireless signal, but other than that, nada. This is true whether it's a self-assigned IP or I manually create the IP (using the IP address that the router recognizes as the MBP).
The MBP hasn't left the house. The entire network set up has not changed.
I have tried:
- Manually setting the IP - worked briefly last night, but now doesn't work again.
- Resetting nvram - didn't work at all
- Power cycling computers and router in all possible permutations
- I may have tried other things that I'm not thinking of now
Any fixes or info on why this kind of thing happens would be greatly appreciated.

cmoorhead wrote:
For the last week, though, my MBP can't access the internet or see other computers.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

Help! My iMessage doesn't work on my new iPhone 5s, I've changed my sim twice, but iMessage only works with my Apple ID.

Recently got a new iPhone 5s and the iMessage doesn't work. I tried the sim in another phone and it didn't work either so I put a completely new sim in my iPhone and iMessage doesn't work. It will only work when I use my Apple ID for received messages. I don't know what to do. I have reset everything and it still doesn't work. My software is up to date. Please help!

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

Help with Youtubevideo which doesn't work in internetexplorer

Hi there,
I'd tried to implement a youtube video guided by this : http://www.heathrowe.com/adobe-edge-preview-4-append-youtube-video/
It worked fine in firefox and chrome but it doesn't work in internetexplorer :-(
Is there a way to modify the code so it would work in all browsers?
I also tried a hint via google to change the codepart ..... $("<iframe type='text/html' ..... to .... $("<iframe type='application/x-shockwave-flash'
but it didn't work either...so I'm stuck now
Thanks for your help
Greetings
martin

Thanks Schrene,
strange...i opened it online from my notebook in IE and it worked...but my workstation has the same IE Version 9.0822 etc.. and it does not work from there...
well...anway... basicly it works :-)
thx :-)
Martin

Help! photo booth doesn't work

There's nothing happen when i click on the photo booth icon on dock. I tried to use my isight another application and it works. So i tried to reinstall it with the DVD. It doesn't work also. anyone know how to resolve this problem? >""<

To Apple Discussions!
Repair permissions & restart your computer.
It would be very helpful if you would supply which OS version you are using by completing My Settings over here in the right column.--->
It would help in providing you w/the correct troubleshooting solutions.

Help: v('p1_test'):=1; doesn't work why?

I want to update states on p34_level_1, 2, 3, 4 etc..
But it seems I can use v('p34_level_1') one way?
for example:
Variable_Value:= v('p34_level_1'); -- <----works correctly
but I cant go:
v('p34_level_1'):= Variable_Value; -- <----DOESN'T work
Below show my code basically i want to loop through some fields and update the contents with values,
any ideas? or suggestions?
I get this error:
ORA-06550: line 17, column 28: PLS-00103: Encountered the symbol ":" when expecting one of the following: := . ( % ;
declare
count_levels number(12,0);
begin
-- Count levels
select count(level_id)
into count_levels
from wi_ccqual_level
where bu = :p1_buid;
-- update page
FOR i IN 1 .. count_levels
LOOP
v('P34_LEVEL_' || i): = i;
--i = i;
END LOOP;
END;

Hi Vanadium
Function v('ITEM') just reads item values from APEX environment.
If you want to update item values from PL/SQL you should use apex_util.set_session_state API
Syntax: apex_util.set_session_state(item,value)
So you should write: apex_util.set_session_state('P34_LEVEL_'||i , i );
I hope this helps you
Oscar

Help with fuzzy search (doesn't work if change order of certain 2 letters)

Hi,
need some help with fuzzy search. It's pretty simple - we use fuzzy search on varchar2 columns that contain first name and last_name. The problem is that i don't really understand why it can't find name in some cases.
Say i want to search for 'Taekpaul'. Then
where CONTAINS(first_name,'fuzzy(TAEKPAUL)',1) > 0 - works
where CONTAINS(first_name,'fuzzy(TAEKPALU)',1) > 0 - works (changed order of the 2 last letters)
where CONTAINS(first_name,'fuzzy(TEAKPAUL)',1) > 0 - doesn't work, finds 'Tejpaul' that is completely unrelated (changed 2nd, 3rd order)
How can i make it find 'Taekpaul' even if i search for TEAKPAUL? Is it related to index? Like Text index should be created with some different parameters?
Thanks!
Edited by: Maitreya2 on Mar 3, 2010 2:08 PM

Thanks, adding '!' worked :)
Do you know where i can read more about '!' and other special characters? I think i didn't see anything like that here: http://download.oracle.com/docs/cd/B14117_01/text.101/b10730/cqoper.htm#BABBJGFJ
I also started using JARO_WINKLER_SIMILARITY function that is actually better i think for what i do. But it's very buggy - sometimes Oracle crashes and kills connection when you try to use it.
Ahha, it's here: http://download.oracle.com/docs/cd/B19306_01/text.102/b14218/cqspcl.htm
So, ! is soundex. Whatever it means..
Edited by: Maitreya2 on Mar 5, 2010 12:14 PM

Help! IPOD clickwheel doesn't work!

hi guys,
I just wanna get some help..
I dropped my IPOD last night,
then the IPOD itself, its working..
But the clickwheel doesnt even work..
The display clearly shows up, the hold button completely works, but the clickwheel doesn't work..
what shall i do?
please help me...

Plz I need help.

[Need Help ] My swf file doesn't work,but preview work ?

Hi... I'm new in Adobe flash CS3 , When i try to open up preview ,my project work just fine, but after exporting ,my movie keep on running, i've been trying with the simple file,and it doesn't work too.
This is the fila file and the exporting result
http://www.mediafire.com/?4433nrlo3z88dhj

Most people are not willing to download files, and using a service like medifire lessens the chances (a viral-behaving site). You will increase your chances of geting help if you explain the details of your design, what is not working, and provide any relevant code in your posting. A link to demo the failed functioning swf could be helpful as well.

Help please - Flash player doesn't work, windows 7

Hi
My flash player has stopped working. I can download the latest version 10.2.152.32 and it says it has installed successfully. When I try to view a web page it either says i need the latest version and takes me back through the latest update successfully but still doesnt work or it just has an empty box with a red cross in the top left corner.
I cannot find it flash player by searching for it on my computer. I have unistalled and reinstalled it several times and it still doesn't work.
I have tried looking for it in manage addons but it is not listed, only shockwave active x which is enabled.
I have no idea what to do next. I am using windows 7 32bit.
Thanks in advance.
Paul.

Hi
Thanks for the reply.
In the flash folder in syswow64 there is: flash10n.ocx, flashinstall,flashutil10n_activex.dll and flashutil10n_activex.
I followed all of the instructions for install and uninstall on the other thread, i ran the malware that you linked to and it found some affected files whichI removed but still not able to run flash despite it saying it installed correctly.
I hope you can help, thanks.

Manual duplex printing doesn't work for LaserJet 100 color MFP M175a

Hi !
OS Windows 8.1. Printer LaserJet 100 color MFP M175a. Driver version 61.108.8.10073 date 2011 Apr 13th
1. After switching on checkbox "Print on Both Sides (Manually)" on "Finishing" tab of Print Properties Dialog and
start printing, dialog with instruction how to turn paper appears. Then printer must print odd pages, stop for
turning paper and then continue printing of even pages on the back side of paper sheets. But my device prints
all pages sequentually in order 1,2,3,... without any breaks. What is it- my mistake or possible bug in driver ?
2. Windows API function DeviceCapabilities with fwCapability=DC_DUPLEX for this printer returns 0 (duplex printing
impossible). This value for any other HP printer, even without automatic duplexer, always equel to 1.
This question was solved.
View Solution.

Hi @Up205,
I see by your post that you are having issues manually printing two-sided. I can help you with this.
The software for this model on Windows 8.1 is the Basic Solution Software and Driver. This basic software solution provides print and scan functionality only. Did you download and install the newest drivers?
HP LaserJet Pro 100 color MFP M175nw Drivers.
Check to make sure Bidirectional Support is Enabled.
Go to the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printers, right click on the printer, left click Printer Properties, on the Ports tab, put a check beside Enable Bidirectional Support.
You might have to restart the computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Podcast app doesn't work with iTunes this made me want back to 5.1.1

Apple may want to make podcast more popout. they made a NEW app "podcasts"
but I start to hate apple to do this just like the iOS 6 maps.
the new Podcasts app is desinged to be work alone (without iTunes)
it can download subscribe find, ok that's cool but it just won't work with iTunes. maybe apple have data shows more people are iDevice centered.
But I'm an iTunes centered user. I use iTunes to search subscribe download and DELETE Podcast that I've watched. and I LOVE THIS WAY! I DON"T WANT MY PHONE TO Manage or store podcasts!
back to iOS 5. every moming, I sync my iPhone with my iTunes, 1 new unplayed podcasts from every show was synced to my iPhone. and I play them on the way to my company.
at night I watch some other shows on my mac. them sync with iPhone. all played podcasts will not remain on iPhone, and marked as played in iTunes and ready to be deleted. iTunes only keep 4 episodes. all things is automatic. but iOS 6 Changes everything. It won't works with iTunes, and music can't play podcasts anymore. I have to Manually subscribe on iPhone again! and Manualy delete on iPhone and Manualy delete on iTunes.
THIS IS TOTOALLY Unacceptable... for me. My phone or iPad have very limited spaces, and 3G data plan.
Use iTunes means, no 3G needed, download only once!
Use Podcast app and sync over iCould means 3G data and download as the same number as yours devices. for me I have to download a same show for 3 times.
I Hope there is some way that can make the old music app back.

I agree, i tried to do what i always do at my office today on my ipod touch, connect to the wifi at the end of the day to download new podcast episodes for my subway ride home, and instead, iTunes with the ios6 update installed yesterday won't let me do that, it tells me i need the new Podcasts app, fine, i go install it, and then when i go back to music, it tells me my podcasts are moved, i go to the new app, so over i go. The new app is slow, crashes twice trying to get into it, i can't see any way to make a playlist, i managed to download some new episodes, but can't see how to make a playlist still. I found out how to delete it (and doing so brought back Podcasts and my podcast playlist to the music app, huzzah!!)
The Podcasts app is not the quality i want from Apple. I like my ipod, i really do, but it seems Apple is convinced that whenever they make a change they think will make things better, they delete old ways of doing things that work for us, the real people in the world using their devices. I like the notion of a stand alone app for finding and downloading podcasts, but why does that necessitate removing them from the music app to play since primarily i download all my new podcasts at night, listen to some on my computer while working at home, put them in an itunes playlist in the order i want to listen to them, then sync each morning with my PC to have whatever i haven't listened to in a playlist so it can play all day at work while i'm there.
Hopefully Apple can learn from this and the ongoing Maps debacle to maybe not be so quick to tell their users how we have to use the devices, and instead spend some time listening to how we use the devices to make our experience better rather than enforcing how they want it used on us.

My ipod turned off and won't turn back on, help! Home button doesn't work and neither does Recboot!

Hello! So I've had my Generation 5 IPOD for nearly two years. Tonight after a shower I tried to charge my IPOD (thinking it had just died because it was short on battery anyway) but it didn't turn on. I would reboot it by pressing the power and home button but sad to say, my home button stopped working about a month ago. : ( After this, I tried connecting it to a charger, two computers AND I downloaded Recboot with the extensions for a PC/Windows, it still did not want to connect. I'm not sure what to do besides maybe taking it to a Apple Store and getting the home button fixed and try to reboot it manually as I always have in the past. Any advice? Right now it's black with no signs of connecting to any machines. If I can't get the home button fixed, could I wait until the battery drains for it to just get recharge? If so how long does it take for the IPOD battery to just die so I can do this? Granted it was always sorta dying before this happened (it was red.) so it shouldn't or wouldn't take too long right?
Please! : ( Any help would be appreciated. I live in a small town and the closet Apple store is about an hour away.

If the screen and iPod does not show any life then letting the batter drain will not do anything.
If you tried another cable and tried ReBoot on another computer and still problem then your iPod has to be repaired/replaced
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

RELINKING IMAGES MANUALLY IN INDESIGN DOESN'T WORK

Hello,
Please help,
I am opening an Indesign CS3 EPS image file in Indesign CS4 which is made by combining 2 Clipping path images. The problem is: I am not ablt to use the images manually. however, automatic relink works fine. Although I don't know where that option is. I just want to use manual relink.
any suggestions??
thanks
Rachael

I've seen cases where this "Mini Save"/ "Automatic Recovery" did not work at all.
Rare cases, but:
Always when the InDesign file is opened on a different computer and you are working on a network. And someone pulls the plug from that other computer (shutting it down, ignoring the messages that another machine is hooked)!
SO: I would never rely or bet on the otherwise fabulous feature "Mini Save"/ "Automatic Recovery".
There is a startup script around in the web by Martin Fischer somewhere on the site hilfdirselbst.ch, that saves a copy of the actual file in a special folder every time you do a "save" or "cmd + s" adding a continous number to the auto saved file name.
Uwe

Help - Manual Podcast transfer doesn't work

Similar Messages

Maybe you are looking for