Help! Material no longer playable since update...

Since 'upgrading' my AppleTV to V4.4 and iTunes to 10.5 I can no play some shows/films that played fine before the update.
I get the message  'An error occured loading this content. Try again later.'
I can play them ok in iTunes on the MacMini connected to my Apple TV2 so I think it must be something to do with the Apple TV.
These are mainly shows ripped from DVD's or downloaded and then converted in Handbrake.
I am a UK expat in India and the AppleTV is where my family and I watch almost all our content - Help!

Ok, found the problem - I had to toggle Dolby to 'On' from 'Auto'.
All my handbrake ripped files now play...
Thanks Apple, It Just Works ...sort of.

Similar Messages

  • Hyperlinks from Outlook are no longer working since updating to 8.

    Hyperlinks from Outlook are no longer working since updating to 8.
    I get a pop-up with "URL" An error occurred in sending the command to the application.

    Well, I've had to downgrade to Firefox 4.0 in order to get hyperlinking back.

  • I have HP Simple Pass on my HHP laptop & all saved passwords are no longer avail since updating Firefox.

    All of my saved passwords that I could enter by swiping my finger on my HP laptop with SimplePass are no longer useable since updating Firefox. I receive the following error message every time I try to use Simple Pass: "Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program,"

    Digital Persona got out of the consumer touch pad software business, and HP selected Egistec to handle HP Simple Pass.
    https://support.mozilla.com/en-US/questions/808105#answer-173165
    http://www.egistec.com/websitedownload/patch/bioexcess/HPSimPlePass7.0.74.0.zip

  • IBooks no longer works since update. Keeps saying retry. Half way through reading a book that cost me $10 . Please fix this problem!!

    Ibook app no longer works since trying to download the latest update. Just bought a book on Cancer treatments for $10 now l can't finish reading it. What happens now??

    Hi, Piafromvic. This forum is about using apple's new iBooks Author software to create books. There's a separate forum for help with the ibooks app for reading books and you might get more answers there:
    https://discussions.apple.com/community/app_store/ibooks
    Good luck!

  • Word for Mac no longer working since updating

    Since updating to lion my Word for Mac won't open

    You're welcome. You might want to check for other PPC apps to avoid being caught off guard again. If you go to the Apple Menu and choose About This a Mac, then click more info, then a System Report, and finally Applications (or Software I can't remember) you can see how each application is coded. Anything that has PPC next to the mane will no longer work.

  • How do I close the tab as the "x" is no longer there since updating system

    How do I close the tab as the "x" is no longer there since upgrading the system ?

    Eek! Lost the 'x' on the tabs in Safari!

  • Iphone 5c no longer charges since updating to ios 8.1.2

    I have updated my iphone 5C to IOS 8.1.2 and since then I can no longer charge my phone properly.  The only way I can charge is connecting the cable to my pc and charging through the pc or laptop.  It no longer works if I connect my phone directly to electricity using the exact same cable.  I can only assume it is a bug in the update as it was working perfectly before.  The only change is that I installed IOS8.1.2  is there some way I can go back to the previous version easily?
    Message was edited by: Maryanne Saffa

    Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Maybe also take a look at this page about battery drainage

  • My iphone will no longer sync since updating to osx 10.6.3, my iphone will no longer sync since updating to osx 10.6.3

    I have recently upgraded to osx 10.6.3 and since then it no longer recognizes my iphone , nothing comes up  , please help !!!

    Update your Mac OS X to v10.6.8
    Click your Apple menu (top left in your screen) then click Software Update....

  • ISight camera no longer working since updating to 10.6.6

    Ever since I updated, the built in camera no longer works on my Mac.
    When I use iChat or Photo Booth I get the following message: "There is no connected Camera"
    Help!

    Hi,
    Welcome to the    Discussions
    Try this http://support.apple.com/kb/HT3964
    At the bottom are three "links" (They actually expand) Use the one for your Mac type.
    8:39 PM Thursday; March 10, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • No longer boots since update [kinit & call trace troubles]

    Hi all,
    Recently I did a full system upgrade on a completely working system (running I assume was a 2.6.28 kernel26) that upgraded it to 2.6.29. It then stopped booting correctly. I left this for a while since I didn't have the time for messing around with it. Today I got back to it, used live cd, chrooted and did a full system update (to a 2.6.30 kernel) hoping it may have fixed it. No such luck.
    Here is the error portion of the boot up/init:
    Waiting 10 seconds for device /dev/sda3 ...
    Root device '/dev/sda3' doesn't exist, attempting to create it
    /bin/mknod /dev/root b 8 3
    :: Initramfs Completed - control passing to kinit
    IP-Config: no devices to configure
    Waiting 0 s before mouting root device...
    kinit: Cannot open root device dev(8,3)
    kinit: init not found!
    Kernel panic - not syncing: Attempted to kill init!
    Pid: 1, comm: kinit Not tainted 2.6.30-ARCH #1
    Call Trace:
    [<c03cebcd>] ? panic+0x5b/0xff
    [<c013f624>] ? do_exit+0x614/0x6f0
    [<c02dce40>] ? redirected_tty_write+0x0/0xe0
    [<c013f810>] ? complete_and_exit+0x0/0x30
    [<c0103d74>] ? syscall_call+0x7/0xb
    My mkinitcpio.conf is untouched, as are the files in mkinitcpio.d.
    My FS is as follows:
    /dev/sda1 - ext2 - /boot
    /dev/sda2 - swap
    /dev/sda3 - ext3 - /
    /dev/sda4 - ext3 - /home
    My menu.1st for grub is:
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz26 rootfstype=ext3 root=/dev/sda3 vga=791 ro
    initrd /kernel26.img
    The bizare thing is, if I change to root=/dev/sda4, I don't get 'root device doesn't exist etc etc etc' and it mounts it fine with no errors and then kinit drops to a recovery console instead of panicing.
    I am not sure what to do now. Basically, what has changed since 2.6.28 that caused this in the first place?
    Thanks in advance for any help!
    Last edited by Kamu (2009-08-03 11:26:13)

    This may sound like a silly question, but you did have /boot mounted within the chroot when the kernel installed right?
    --Does the arch-fallback initrd help?
    --Boot into your recovery console and take a look at dmesg & /proc/partitions. Make sure your drives are being detected & what drives/partitions are where.
    --More than one disk? ls /sys/block/[sh]d[a-z]/ should show you what partitions are on which disks.
    -- Be sure root entry in /etc/fstab and on kernel command line are the same.
    --More than one disk controller? Put the module in mkinitcpio.conf so the controller with your / on it gets loaded first  (I had fun and games with this during the ide -> pata switch)
    +1 for the referencing partitions by UUID, you can also do it by filesystem label (root=/dev/disk/by-[label,uuid]/XXXX)
    Steve.

  • The option to stream Bluetooth audio no longer exists since updating to IOS 5.0.1.  What can I do?

    Please help me get this Bluetooth stream problem fixed.  I miss being able to listen to tunes!  Yes, I can plug it in, but the Bluetooth is so nice.  My Bluetooth headset and Bluetooth to Sync in my Ford works too.  But no audio.  The option used to be on Pandora, iPod, etc.... But the option no longer exists.

    Yea, Its quite strange.
    It has been working perfectly fine for me for about 6 months that I have had my car.
    Now suddenly I cant connect and the only thing that changed, is that my iphone automatically updated to 5.01..
    My Kias bluetooth firmware has not changed. And it surely cannot be changed over air.
    When it works its quite the feature.. Its amazing for connecting  iphones to cars.
    switching tracks with the wheel, volume.. all worked great before this update for me..
    I'll try and reset everything tonight and see, but I have tried deleting and re-pair the 2 devices together, to the same result.
    Once... I did get a phone call, which then the voice did stream through the car, and then suddenly,
    my sorento did come up in the volume output tab, but then it disappeared..and left me back with the default iphone/iphone speaker..

  • Lenovo W530 no longer boots since updating past 3.7.1

    Hi,
    I've been suffering from this for a while and I finally thought I should get around to asking the collective wisdom of the forums.  I use rEFInd to boot my laptop and everything has been working well until I updated to 3.7.3.  The next time I rebooted it got to the rEFInd menu and let me select the kernel but write after it writes out the line about what kernel/initrd it's writing it completely hangs.  No console, no network, nothing.  I can't get it to panic either, it just sits there uselessly mocking me.
    I've since tried several other versions of rEFInd, switched to gummiboot, switched back, tried 3.7.4 and 3.7.5 and nothing has helped other than reverting the kernel package.  Has anyone seen anything similar or have any ideas on what I can try?  My only thought at this point is to wait for a 3.8 package and try again and pray it magically works.  It's very frustrating as I can get very limited debug information due to the way it just freezes up as soon as it gets past rEFInd.  I thought maybe the efi stub stuff was broken but I wouldn't know where to look/how to fix that.
    Any suggestions greatly appreciated.

    I did try that.  I manually copied back over the 3.7.1 kernel upon reinstalling the package to confirm that it would work.  I manually copied each of the pieces on each refind upgrade (in case) as well as when setting up gummiboot.

  • Updated to Mavericks:cd/dvd drive no longer works since update. How do I fix this?

    I updated my macbook pro with the Mavericks update last week. Since then, my cd/dvd drive no longer works.
    It worked until I did the update. How do I fix this? Can I delete the update and if so how do I do that? or
    is thiere a fix for this?

    1. Reset PRAM.  http://support.apple.com/kb/PH14222
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Video no longer streaming since update

    Apple TV will no longer stream movies from my iTunes Library since the update. The only way I can see new movies is if I physically Sync them over to the Apple TV Hard Drive. This not only seems to invalidate the entire friggin' point of having an Apple TV, but it's especially inconvenient since Apple decided to be inconsiderate jerks and disable the USB port. (And thanks for that, Apple. Can't have me doing anything useful like adding on my own storage, now can we?)
    Anyone know how to get movies to Stream again? Thanks.

    I don't mean to be snarky here, and I do appreciate the fact that you're at least commenting, which nobody else is bothering to do, but when it comes to Apple, installing the latest Update is NEVER the right answer.
    For example, a few years back Apple released a Firmware update that Bricked my entire Mac. Their answer? "Buy a new motherboard".
    In this case, I went ahead and updated to 3.0.1. Now I not only can't see my media, but I can no longer log in to the iTunes store. So basically, every update I install makes my ATV that much more useless.

  • Speaker does no longer work since updated to Mac OS X 10.6.8

    Hi,
    my Bose speaker no longer work with my MacBookPro since I've updated to Mac OS X 10.6.8. When I connect them to my iPod they work as usual. Any Ideas?
    Thank you, Michael

    Check this thread out.

Maybe you are looking for