Help~~:'MD_SALES_ORDER_STATUS_REPORT' filter rule for MD04?

As you know we can use function 'MD_SALES_ORDER_STATUS_REPORT' to relate the (PR PR PlanOrder Prorder) with Sales Order.
But when the screen go to MD04,the number of (PR PR PlanOrder Prorder) showed is less than the function 'MD_SALES_ORDER_STATUS_REPORT' Export table IIOELX.
I want to know the filter rule of the order data?
How can?
Thanks a million~~

Lorryhappy,
It is not clear to me that this function module will perform the task that you expect.
Anyhow, have you looked at OSS notes [326325|http://service.sap.com/sap/support/notes/326325] or [325543|http://service.sap.com/sap/support/notes/325543]?
Rgds,
DB49

Similar Messages

Filter rule for subscription to the mailservice

Hi,
I developed a process which sends an email to a customer. The subject of this email includes a requestID. After the email is send, I would like the process to wait for a reply of the specified customer (filter: from=[email protected]). I would also like to add a filter on the subject (because a customer can have more then one requestID's).
Is there anything possible like the LIKE statement or a CONTAINS statement? If I say subject=*<ID>*, it will hang until it gets an message with the *-signs around the ID.
It will work if I put 'RE: ' in front of the sended subject, but this is not a fancy solution for my problem.
Kind Regards,
RenÃ©

The default behavior of subject="ID" basically it does contains functionality.
In your case, lets say the subject is "WorkOrderIDItem" or "112121ID42232", to filter this you can just specify subject="ID" as filter. this will filter those two subjects.
We are going to provide regular expression based subject filtering in the next release. Please let us know if you need further help.

Need help adding filter criteria for reports with the GO URL + Post method.

In attempts to hide some of the information from the URL, we've decided to go pull the parameters out of the url used in the GO Url method. We've managed to get it to retrieve the report and display it without showing the user name and password how we cannot seem to pass in any search criterias.
The following is what i have:
Can anyone help me with this issue? or provide any suggestions?
Thanks!
form id="form1" runat="server" action="http://452.342.424.421/analytics/saw.dll?Go" method="post">
<input runat="server" id="Cmd" type="hidden" name="Cmd" value="Answers"/>
<input runat="server" id="nqUser" type="hidden" name="nqUser" value="admin"/>
<input runat="server" id="nqPassword" type="hidden" name="nqPassword" value="admin"/>
<input runat="server" id="Path" type="hidden" name="Path" value="/users/abid.farooq/Countries" />
<input type="hidden" name="Options" value="fr" />
<input type="hidden" name="Action" value="Navigate" />
<input type="hidden" name="P0" value="1" />
<input type="hidden" name="P1" value="eq" />
<input type="hidden" name="P2" value="%22Location%22.%22Country%20ID%22" />
<input type="hidden" name="P3" value="CHN" />

Hi,
Instead of this,
<input type="hidden" name="P2" value="%22Location%22.%22Country%20ID%22" />
can you try this:
<input type="hidden" name="P2" value='"Location"."Country ID"' />
Here, instead of enclosing the value in double quotes, enclose in single quotes. Also replace %22 and %20 with double quotes and space.
Try it and let me know if this helps!
Thanks

Help on creating rules for weblogic portal 8.1

Hi,
I have a requirement where I have to get some content from the cms based on
the following rule.
The content attribute has a field expiry date.
RULE:
get the content where the expiry date is greater than sysdate - The rule
engine should take the system date dynamically and not the one that is hard
coded in the rule.
Can some solve me this problem and suggest the way to achieve this in
weblogic portal 8.1
Regards
Manoj Sharma

I have contradictory informations ... It seems that the password is MD5 hashed and stored in BASE64 ...
Is this PL/SQL code is right to store the "crypted" Password ? :
UTL_I18N.RAW_TO_CHAR
UTL_ENCODE.BASE64_ENCODE
dbms_crypto.hash
src => UTL_I18N.STRING_TO_RAW('1234567890ABCDEF', 'AL32UTF8'),
typ => dbms_crypto.HASH_MD5
'AL32UTF8'
);

Need help with Rules for mail accounts

Today I deleted a rule for a mail account and now I cant receive mail in 4 of 8 accounts. I'm not experienced with Mac's Mail program. Id there something you have to do for multiple accounts to recieve all mail? I can send but not receive.
Help!
~ Tammy

It's hard to believe that deleting a rule could have a bearing on the ability to receive messages from any account... unless that rule did something that prevented subsequent rules to process the messages that you apparently can't receive now.
That is, either having deleted the rule has absolutely no bearing on your problem, or the problem is that those messages are now being processed in an unexpected way by some of your other rules.
What type of accounts are these (POP, IMAP, .Mac)? What does "I cant receive mail in 4 of 8 accounts" mean?

Rules for the namespace prefix structure....please help

Hello,
I want to know the specific rules for thePCD Object's namespace prefix structure. I know, and all the doc that i have says that i can put the namespace prefix like com.company.pct. Now i want to now for example if i have an iview that hold an HR application for my company, if it is ok that i call the namespace prefix of that iview like this: com.company.pct.hr.iviews. I saw in one doc, that maybe SAP use this structure in order to set this value like this: com.sap.km.iview. so i have that doubt. Please if anyone can help me....
Regards
Mariana

Hello Mariana,
I am not particulary aware of any 'rule' per se on namespace prefix structure for SAP applications. Maybe a general guideline - like the non-usage of special characters in it (that I believe is not allowed in the first place). In Java terms, these are called 'packages' -- you can have say: com.company.util.statistics -- for statistics-related utilities. That said, for me at least, it's a matter of proper organization of these objects into packages. For plain java utility classes you custom-built, there are instances that you are required to use it. That said, I am not sure that there are particulars that you have to adhere to strictly.
Jan

AAD Sync - updates to attribute and partition filter rules are not applied

The first Attribute filter rules and/or Directory Partition filters we add with a new AAD Sync Installation work fine immediately.
Any subsequent changes to the rules / new rules / removed rules / updated partition filters don't have an impact on the filtering behavior until we
reboot the AAD Sync host.
We've tried restarting the sync service, all sorts of Full Sync etc., nothing else helps.
We don't have any duplicate rules (have those regularly due to the known bug, but always remove them).
We're running AAD Sync build 1.0.0485.0222.
Thanks for any suggestions.

Thanks for your swift suggestions. We've set up a new environment now which finally works fine. We have the same issue at the customer's site where we'll verify next week (100k user accounts, filters are crucial there).
Problem seems to have been the Full Import that we didn't do or didn't do in the right place (can no longer verify since the original test environment is now gone). We were probably doing Full Synchronization instead (as suggested in
the documentation on MSDN).
Still interesting that the reboots had helped every time - they don't imply a Full Import just by themselves I assume?
Thanks again,
René

How do I apply rules for date to cell

I use numbers 3.1. And I have trouble to apply a specific rule for a cell. I want to achieve an automatic fill in for a cell for todays date. So I open the filter on the right side of my document. I chose "date and time" and then I define the rule for its altering application for every week. I manage to go over the definition insofar as I choose "today" and the style "kursive". But I am unable to fill in this information into the cell. I hope I explained this function understandable for I am German and I use of course the German layout in Numbers. ( I could not find a german speaking platform for my problem ). Can someone help?

Courtesy of Google Translate
Dear sorole,
Typing the date:
<image>
Typing "=" shows the Function Browser:
<image>
Regards,
Ian.
Mit freundlicher Genehmigung von Google Translate
Sehr geehrte sorole,
Die Eingabe des Datums:
Die Eingabe von "=" zeigt der Funktionsübersicht:
Grüße,
Ian.

Leave Quota generation with diifferent rules for different countries

Hi,
I have the following requirement need help in achieving this.
Employers must grant 10 days paid leave to employees that worked for six consecutive months from the time of hiring and who worked on not less than 80 per cent of all schedule work days. This paid leave may be taken consecutively or separately. Where an employee's application to take paid leave will hinder the normal business operations, the employer may require the employee to take such paid leave at a different time.
The number of days of paid leave available to employees increases in proportion to employees' length of service as set forth in the below table.
Years of Service 0.5 1.5 2.5 3.5 4.5 5.5 6.5+
Paid Holidays 10 11 12 14 16 18 20
The right to annual paid leave expires after two years. In other words, annual paid leave left over from one year may be carried over and taken the next year only. For example, if an employee is awarded 10 days paid leave after their first 6 months of employment; those paid holidays will become invalid after 2.5 years of employment. Use them or lose them.
Simply put, holidays from one year can be carried over to the next year, but not to the third year. So, if you don't take your leave from one particular year within 12 months of that year ending, you will lose that first year's allowance.
Employee can take leave encashment of holiday leave only when leaving their employer. It is not legal for companies to buy up the holiday leave of those still working for the firm.
In my organization one PSG grouping has been used for all countries, it wont be possible to change the grouping now. In such a case how can we provide different rule for different country without customizing the Leave module.
Do we have to use any PCR for this, if yes which??
Regards,
Jailakshmi
Edited by: Jailakshmi on Aug 3, 2011 7:16 AM

Hi,
Use QUOMO Feature to give different entitilement to employees.
Leave entitlement as per seniority can be configured in base entitlement.
Keep validity and deduction period for 2 years by using :Relative postion" option in validity and deduction period table.
Rgds,
Lata
Rgds,

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to write a validaton rule for Cost Center and plant in PO

Hi,
I need to write a Validation Rule for Cost center and Plant in Purchase Order to get the error message if the Plant and cost center combination didnot match.
But i am not sure in which transaction code do we need to write this validation. Kindly help me by giving T.Code or path to do validation at PO level.
Thanks
Sunil

>
Sunil Pal Raj wrote:
> Hi,
>
> I need to write a Validation Rule for Cost center and Plant in Purchase Order to get the error message if the Plant and cost center combination didnot match.
>
> But i am not sure in which transaction code do we need to write this validation. Kindly help me by giving T.Code or path to do validation at PO level.
>
> Thanks
> Sunil
Check OKC7
Regards,
Indranil

INTRASTAT reporting rules for France french (receipt)

Hello experts,
I would like to know the rules for selection and inclusion of the data for the INTRASTAT report for import.
My country is FRANCE. I know that the logic depends on the country.
I've not found a thread explaining France.
My SAP is 4.7.
Thanks a lot for any response

Hi,
I suggest you the Note 1016386 - Intrastat for Romania. Althought it is for Romania, this note contains a document that explain the setttings in IMG, functional steps, etc...
In notes, if you search notes with the string 'INTRASTAT FRANCE' you have around 25 notes by legal changes. The differences in countries are formats of files, paper declarations, etc..
Each country call a report to do the 'document' (file or paper) In your case: RVEXDAIF and RVEXPAIF. Run it in SE38 and read the info.
If you need something else, let me know it.
I hope this helps you
Regards,
Eduardo

Middleware-Filter settings for the replication of BP from CRM to R/3

Hi Experts,
Can we set filter criteria for the replication of BP's from CRM to R/3 in the delta load.If so how can we achieve it.
Points will be rewarded.
Thanks in advance
Nadh.

Dear Nadh,
Pls go through the followings:
http://help.sap.com/bestpractices/crossindustry/crm/v240/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc
http://help.sap.com/bestpractices/BBLibrary/documentation/D63_BB_ConfigGuide_EN_UK.doc
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
C03
Thanks,
Atin

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

How to refer field of DataSource in transfer rule for DSO object in BI 7.0

hello Gurus,
I am new to BI 7.
pls tellme how to refer field of DataSource in transfer rule for DSO object.
I will assign points to proper answer.
Praveen.

hi praveen,
when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
hope this will help you.
regards
vaibhav

Help~~:'MD_SALES_ORDER_STATUS_REPORT' filter rule for MD04?

Similar Messages

Maybe you are looking for