Help me Apple aficionados! I am working on a newsletter for the first time on my Mac Pro so it is a hit

How can I control when my Mac Pro closes me out of the newsletter I am working and I lose  my recent work(I am using pictures and graphics as well as text)?

what word processing software are you using?

Similar Messages

  • Help I just hooked up my iPhone to my laptop for the first time and i accidentally chose to have it read it as my ipod so all my pictures were deleted off of it. I had not backed it up before. Is there anything I can do?

    Help I just hooked up my iPhone to my laptop for the first time and i accidentally chose to have it read it as my ipod so all my pictures were deleted off of it. I had not backed it up before. Is there anything I can do? Please tell me my photos aren't gone :[

    Did you by chance have photo stream turned on? If so then they might be there. When you restored your phone it deleted everything and they will be unretreivable from your computer.

  • Page with PartialTriggers is not working when it loads for the first time

    Hi All,
    I am experiencing unexpected behavior when using partial triggers and this recurres every time the page loads and the second time it works fine.
    Here is the requirement, The page has a check box, when checked, two text boxes should be disabled. When unchecked the two fields should be enabled.
    (The fields are Start Date Time and End Date Time in the code below). I am also handiling the Date Validations on value change listener of Start Date time and have no issues on that.
    When I try to enter the dates on page load (The check box - "Process Full Indicator" is not selected), I enter the required fields (PEID, Dates and check the Process IAF and Process SMS check boxes and click on the ProcessRFI Button, the date fields are emptied and nothing happens. When i redo the same thing the second time, it works.
    The button invokes a BEPL process.
    One of the links suggested that I use the partialTrigger tag in the parent layout, I used in the panelFormLayout and it sill did not reflect.
    I am facing the same issue in an other page that is reteriving data from a DB Table. As I notice, both the pages are invoking dataControlls. Not too sure if it is related.
    Kindly help.
    <af:panelFormLayout id="pfl1"
    inlineStyle="font-weight:bold; height:181px;"
    >
    <af:inputText value="#{bindings.PEID.inputValue}"
    label="PEID"
    required="#{bindings.PEID.hints.mandatory}"
    columns="#{bindings.PEID.hints.displayWidth}"
    maximumLength="#{bindings.PEID.hints.precision}"
    shortDesc="#{bindings.PEID.hints.tooltip}" id="it1"
    inlineStyle="font-weight:bold;">
    <f:validator binding="#{bindings.PEID.validator}"/>
    </af:inputText>
    <!--af:inputText value="#{bindings.EnrichmentBatchID.inputValue}"
    label="Enrichment Batch ID"
    required="#{bindings.EnrichmentBatchID.hints.mandatory}"
    columns="#{bindings.EnrichmentBatchID.hints.displayWidth}"
    maximumLength="#{bindings.EnrichmentBatchID.hints.precision}"
    shortDesc="#{bindings.EnrichmentBatchID.hints.tooltip}"
    id="it3">
    <f:validator binding="#{bindings.EnrichmentBatchID.validator}"/>
    </af:inputText-->
    <af:inputDate value="#{bindings.StartDateTime.inputValue}"
    label="Start Date Time"
    shortDesc="#{bindings.StartDateTime.hints.tooltip}"
    id="id1" inlineStyle="font-weight:bold;"
    binding="#{backing_ProcessRFI.input_startDate}"
    valueChangeListener="#{backing_ProcessRFI.assignFromDateValue}"
    autoSubmit="true"
    required="true" immediate="true">
    <f:validator binding="#{bindings.StartDateTime.validator}"/>
    <af:convertDateTime pattern="#{bindings.StartDateTime.format}" type="both"/>
    </af:inputDate>
    <af:inputDate value="#{bindings.EndDateTime.inputValue}"
    label="End Date Time"
    shortDesc="#{bindings.EndDateTime.hints.tooltip}"
    id="id2" inlineStyle="font-weight:bold;"
    binding="#{backing_ProcessRFI.input_endDate}"
    partialTriggers="id1"
    required="true"
    valueChangeListener="#{backing_ProcessRFI.checkNullStartDateValue}"
    autoSubmit="true" immediate="true">
    <af:validateDateTimeRange minimum="#{backing_ProcessRFI.dtFromDate}"
    hintMinimum="End date should be greater than the Start Date"
    />
    <f:validator binding="#{bindings.EndDateTime.validator}"/>
    <af:convertDateTime pattern="#{bindings.EndDateTime.format}" type="both"/>
    </af:inputDate>
    <af:selectBooleanCheckbox value="#{bindings.ProcessIAFIndicator.inputValue}"
    label="Process IAF"
    required="#{bindings.ProcessIAFIndicator.hints.mandatory}"
    shortDesc="#{bindings.ProcessIAFIndicator.hints.tooltip}"
    id="it2"
    inlineStyle="font-weight:bold;">
    <f:validator binding="#{bindings.ProcessIAFIndicator.validator}"/>
    </af:selectBooleanCheckbox>
    <af:selectBooleanCheckbox value="#{bindings.ProcessSMSIndicator.inputValue}"
    label="Process SMS"
    required="#{bindings.ProcessSMSIndicator.hints.mandatory}"
    shortDesc="#{bindings.ProcessSMSIndicator.hints.tooltip}"
    id="it5"
    inlineStyle="font-weight:bold;">
    <f:validator binding="#{bindings.ProcessSMSIndicator.validator}"/>
    </af:selectBooleanCheckbox>
    <af:selectBooleanCheckbox value="#{bindings.ProcessFullIndicator.inputValue}"
    label="Process Full Indicator"
    required="#{bindings.ProcessFullIndicator.hints.mandatory}"
    shortDesc="#{bindings.ProcessFullIndicator.hints.tooltip}"
    id="it4"
    inlineStyle="font-weight:bold;"
    binding="#{backing_ProcessRFI.processFullIndicator}"
    valueChangeListener="#{backing_ProcessRFI.handleFullIndicator}"
    autoSubmit="true">
    <f:validator binding="#{bindings.ProcessFullIndicator.validator}"/>
    </af:selectBooleanCheckbox>
    <af:panelStretchLayout id="psl1" inlineStyle="height:40px;">
    <f:facet name="center">
    <af:panelGroupLayout layout="horizontal"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
    id="pgl2">
    <af:commandButton actionListener="#{bindings.ProcessRFI.execute}"
    text="Process RFI"
    disabled="#{!bindings.ProcessRFI.enabled}"
    id="cb2"
    attributeChangeListener="#{ProcessRFI.processResult}"/>
    <af:resetButton text="Clear" id="rb1"/>
    <f:facet name="separator">
    <af:spacer width="10" height="10" id="s2"/>
    </f:facet>
    </af:panelGroupLayout>
    </f:facet>
    </af:panelStretchLayout>
    </af:panelFormLayout>

    Hi John,
    My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
    I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
    Kindly advice,
    Thanks,
    Ram

  • I want to create for the first time ever an iPhoto library on my Mac Mini from all of my seperate external hard drives over the years. Instead of filling my Mac Mini hard drive space with all of the pics can I import it to a seperate Apple hard drive.

    I want to creat for the first time on my Mac Mini an iPhoto library. I have many seperate hard drives with pics I want to import but are concerned I will fill the hard drive with pics alone. Can I install the pics on one larg (1TB) external apple hard drive and use iPhoto functions still with the pics being installed on a seperate drive from the iPhoto OS?

    This is our resident iPhoto guru, Terence Devlin's, advice:
    You can move your iPhoto Library to an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Once that is done you can import directly into the iPhoto library on the external HD.

  • I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

    I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID &amp; password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

    Previous user installed iOS 7 beta on that iPhone.
    Take it back and get your money returned. You
    are running into a new security feature. Whoever owns
    the ID that it is asking for is the only person who can
    remove the security. That iPhone is worthless to you.

  • I need help, i just synced my iphone3gs for the first time and now most of my apps wont work

    I just used itunes for the first time to sync my iphone 3GS!!!  Now, half of my apps will not work! Any suggestions? I touch on the app and it flashes real fast then back to my home screen...  HELP PLEASE!!!!

    Try to reset the phone by holding the sleep and home button for at least 10 sec, until the Apple logo comes back.
    If this does not work, restore the phone. Restoring is covered here: http://support.apple.com/kb/HT1414

  • Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

    Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

  • Hi can anyone please help me! My I phone is in recovery mode i lost it and it was returned to me fully working. I ran an update and it shut down. I have loads of pics and vids of my little girls including my youngest counting to ten for the first time.

    Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time.
    Can I recover these files or have I lost them? I lost the phone last week and it was returned working but with an update to install I did this and it shut down.
    If anyone can please help I would be eternally in your debt I have loads of sentimental pctures in here but cant get to them.

    Sorry, but if it's in recovery mode, anything on the phone is already gone. If you had PhotoStream turned on, hopefully the photos will still be out there.
    You have no choice at this point but to restore from your last backup.

  • I installed Apple TV yesterday and then purchased and watched a film for the first time. Today Apple TV does not accept my pass word. I' m confused can any one help me?

    I installed Apple TV yesterday and then purchased and watched a film for the first time. Today Apple TV does not accept my pass word. I' m confused can any one help me?

    there are up to 3 different password
    there is the appleID password
    there is the wifi encryption password
    there is te shared itunes lib password

  • I got my i pod touch and 2 weeks later i dropped it and the screen broke i have a 1 year warranty and people say apple fixs it for free for the first time or if you have a warranty is this true? Please help

    I got a ipod touch 4th gen with a 1 year warranty and 2 weeks later i dropped it and it cracked. Can apple fix this for free? People say if you go to apple store they fix it for free for the first time. or if you have a warranty

    " Can apple fix this for free? "
    No.  Like any warranty on any product, damage is not covered.
    "People say if you go to apple store they fix it for free for the first time"
    Really.  What people say this?  Not true.

  • How do I accept the Terms and Conditions when trying to set up an Apple ID for the first time ( using my iphone)?

    I am trying to create an Apple ID by using the Itunes icon on my iphone 5s for the first time. It opens up a screen with the 54 pages of Terms and Conditions and it does not allow me to even accept the Terms and Conditions... no Accept option or place to click!
    The only option is to Send the terms and conditions via email... which also does not work...it keeps asking me to "try again"... Has someone else had this problem?

    Hello, Wyseup. 
    Thank you for visiting Apple Support Communities.
    Most likely this email address has been attempted to be setup as an Apple ID at some point.  You can reset your Apple ID password via the steps in the first article below.  If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • Tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

    tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!

    I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone.  I don't know what else to do :-( any help or suggestions are highly appreciated!
    I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
    I hope someone has a fix other than that one.

  • Hello i have accessed my i cloud for the first time and thought that my photos would be there and i cant find them please help

    i have accesed my icloud for the first time today excpecting there to be photos on there wich i backed up on my old phone but they are not on there atall please help as there is alot of photos of my child

    Hello chelsey69,
    I read your post, and it sounds as though you'd like to learn more about Photostream. I have linked to an article that will instruct you on how it works:
    Turn on Photo Stream - iCloud - iPhone Basics - Apple Support
    http://support.apple.com/kb/TI70
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How does one get to use their apple id for the first time?

    I registered for an Apple ID, which was successsful, but i can't seem to use it, because everytime i try to use it on iTunes it says I have never used this account before, and directs me to the review option which i select but it does the same thing all over again and I can't upgrade to the latest version, because System Preference is failing to open when I try to open the **** thing

    Hi RegoAntony,
    I apologize, I'm a bit unclear on the exact nature of what you are describing. If you are trying to use your Apple ID for the first time in the iTunes Store, you may find the following article helpful:
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    Regards,
    - Brenden

Maybe you are looking for