Help me! can not ping through hostname

Hello
i am using Solaris 8. I can ping and reach the other host by IP only,
I can not reach the other host by the DNS name. How can i overcome
this problem. shall i do any configuration .Help me to resolve the problem.
Thanks in advance,
balachandar.

Hello,
Modify /etc/nsswitch.conf file to include dns and not inly files in the hosts line. This way you tell Solaris to use both naming services, files and dns (there is a template called /etc/nsswitch.dns). Also you must put your dns servers�s IPs at /etc/resolv.conf. The sintaxis is:
nameserver XXX.XXX.XXX.XXX
nameserver YYY.YYY.YYY.YYY
nameserver ZZZ.ZZZ.ZZZ.ZZZ
Bye,
jmiturbe

Similar Messages

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not get through at Yosemite. Can someone help me there?

Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

Can not search through 1003 results

1. Firefox Help
2. Search
Found 1003 results for "where are my posts"
I can not search through 1003 results to find my solution. I want to see what I have posted, to what threads I’m subscribed and responses to all. How?

Thank you,
But I don’t see these specific words “Firefox Support Forum
The Official Community-Driven Support Web Site for Firefox” on this page. Perhaps I have not searched for them thoroughly enough. Are they at the top, bottom, somewhere else or on a different page?
Maybe I am not seeing the same page that you are seeing. I recently downloaded Firefox 9.0.1. If we are not seeing the same page, is there something I can do to correct this?

Why can not purchase through my cr card since last time on 7/2/2012

on 7/2/2012 i purchased chips twice for $99.99 each for texas poker game one chips order credited in the game and the other not credited mainwhile both deducted from cr. card . Now i can not purchase through my card and give me massage refer to itune support for help although there is enough balance in the card.
Thanks for supporting

You are not talking to Apple here. This is only a user-to-user forum and noone here can have idea of what if anything has happened to whatever it is you're talking about, and noone here can do a thing to resolve your issues.
It would seem you need to be talking to iTunes support, which is addressed through iTunes, not these or any other of these Apple Support Communities forums.

Can not ping oracle linux vm in Virtual Box from my host

Hy
I have setup oracle linux 7 on virtual box including vboxadditions.
But I can not ping this maschine from outside ( it works for my other vm oel 5.8 )
I did systemctl stop filewall.service
Here my Network konfiguration inside my oel7 vm:
/etc/sysconfig/network-scripts/ifcfg-enp0s8
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=public
UUID=388ee413-55e9-45e1-be1d-4f5eedc402f3
ONBOOT=yes
IPADDR0=10.20.50.101
PREFIX0=24
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
HWADDR=08:00:27:5F:87:91
Can anyone help?
Thanks
Peter Schlaeger

Hi,
Before discussing the network configuration of Oracle Linux 7 (By the way; it seams correct), lets talk about the VirtualBox network configuration, So the Network adapter of your VM can be attached to {NAT, Bridged Adapter, Internal Network, Host-only Adapter, ...}, what is the Adapter attached to your NIC?
Make sure the Network Adapter is the same as the your other VM (OL 5.8).
Best regards

Can not ping internal network from ASA

I can not ping internal computer from ASA. Comp IP address 192.168.187.15, gateway is 192.168.187.14 which is ASA internal interface. I've got an IP Phone connected to the same ASA with Ip address 192.168.185.15 and internal ASA interface 192.168.185.14 and everything works fine. We are doing testing, do not be surprised of configuration.
ASA Version 8.2(1)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
interface GigabitEthernet0/0
nameif ouside3
security-level 0
ip address 10.254.17.25 255.255.255.248
interface GigabitEthernet0/1
nameif outside
security-level 0
ip address 10.254.17.9 255.255.255.248
interface GigabitEthernet0/2
nameif Lan
security-level 100
ip address 192.168.185.14 255.255.255.0
interface GigabitEthernet0/3
nameif comp
security-level 50
ip address 192.168.187.14 255.255.255.0
interface Management0/0
nameif management
security-level 100
no ip address
management-only
boot system disk0:/asa821-k8.bin
ftp mode passive
access-list 110 extended permit ip any any
access-list nat extended permit ip any any
access-list allow_ping extended permit icmp any any echo-reply
access-list allow_ping extended permit icmp any any source-quench
access-list allow_ping extended permit icmp any any unreachable
access-list allow_ping extended permit icmp any any time-exceeded
access-list allow_ping extended permit udp any any eq isakmp
access-list allow_ping extended permit esp any any
access-list allow_ping extended permit ah any any
access-list allow_ping extended permit gre any any
access-list nonat extended permit ip any any
access-list nat2 extended permit ip any any
access-list nonat2 extended permit ip any any
pager lines 24
logging asdm informational
mtu ouside3 1500
mtu outside 1500
mtu Lan 1500
mtu comp 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (Lan) 0 access-list nonat
nat (Lan) 1 access-list nat
nat (comp) 0 access-list nonat
nat (comp) 1 access-list nat
access-group allow_ping in interface outside
router eigrp 2008
neighbor 10.254.17.10 interface outside
network 10.254.17.8 255.255.255.248
network 192.168.185.0 255.255.255.0
network 192.168.187.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 10.254.17.10 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map mymap 10 match address 110
crypto map mymap 10 set peer 10.254.17.10
crypto map mymap 10 set transform-set myset
crypto map mymap interface outside
crypto map mymap2 20 match address 110
crypto map mymap2 20 set peer 10.254.17.18
crypto map mymap2 20 set transform-set myset
crypto map mymap2 interface comp
crypto map mymap3 30 match address 110
crypto map mymap3 30 set peer 10.254.17.26
crypto map mymap3 30 set transform-set myset
crypto map mymap3 interface ouside3
crypto isakmp identity address
crypto isakmp enable ouside3
crypto isakmp enable outside
crypto isakmp enable comp
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
priority-queue outside
threat-detection basic-threat

This is what I get, looks like ASA does not reply. Why?
ciscoasa# sh capture cpi
5 packets captured
1: 05:20:14.494908 192.168.187.15 > 192.168.187.14: icmp: echo request
2: 05:20:19.526935 192.168.187.15 > 192.168.187.14: icmp: echo request
3: 05:20:25.026320 192.168.187.15 > 192.168.187.14: icmp: echo request
4: 05:20:30.525699 192.168.187.15 > 192.168.187.14: icmp: echo request
5: 05:20:36.025084 192.168.187.15 > 192.168.187.14: icmp: echo request

Can not ping one of the IP in DMZ3(VLAN4) but can ping IP in DMZ2(VLAN2)

Any expert advise please.
There are three DMZ in datacentre firewall (5510)..dmz1 and 2 and 3
Here is the thing between Data centre and our office network.(firewall 5510)
I logged in one of our machine Domaincontroller (10.102.28.53) in office network I can ping IP: 10.1.2.52 (VLAN2-DMZ2) in datacentre.
I can not ping 192.168.4.230 (vlan4 dmz3) in datacentre from this machine 10.102.28.53
Thanks.

make sure that the the firmware version of your router is the updated one.It should be firmware version:1.50.9.you can go to www.linksys.com/download and look for wrt54gs v6-->click downloads for this product-->click firmware-click download firmware and save it on your desktop...you can also go to linksys.com/kb and search for upgrade firmware and it will give you the steps on how to upgrade the firmware of your router.
Hope it helps!!

Can not ping between remote vpn site ???

site A is l2l vpn, site B is network-extend vpn, both connect to same vpn device 5510 at central office and work well. I can ping from central office to both remote sites, But i can not ping between these two vpn sites ? Tried debug icmp, i can see the icmp from side A does reach central office but then disappeared! not sending to side B ?? Please help ...
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network SITE-A
network-object 192.168.42.0 255.255.255.0
object-group network SITE-B
network-object 192.168.46.0 255.255.255.0
access-list OUTSIDE extended permit icmp any any
access-list HOLT-VPN-ACL extended permit ip object-group CBO-NET object-group SITE-A
nat (outside,outside) source static SITE-A SITE-A destination static SITE-B SITE-B
crypto map VPN-MAP 50 match address HOLT-VPN-ACL
crypto map VPN-MAP 50 set peer *.*.56.250
crypto map VPN-MAP 50 set ikev1 transform-set AES-256-SHA
crypto map VPN-MAP interface outside
group-policy REMOTE-NETEXTENSION internal
group-policy REMOTE-NETEXTENSION attributes
dns-server value *.*.*.*
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value REMOTE-NET2
default-domain value *.org
nem enable
tunnel-group REMOTE-NETEXTENSION type remote-access
tunnel-group REMOTE-NETEXTENSION general-attributes
authentication-server-group (inside) LOCAL
default-group-policy REMOTE-NETEXTENSION
tunnel-group REMOTE-NETEXTENSION ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group *.*.56.250 type ipsec-l2l
tunnel-group *.*.56.250 ipsec-attributes
ikev1 pre-shared-key *****
ASA-5510# show route | include 192.168.42
S 192.168.42.0 255.255.255.0 [1/0] via *.*.80.1, outside
ASA-5510# show route | include 192.168.46
S 192.168.46.0 255.255.255.0 [1/0] via *.*.80.1, outside
ASA-5510#
Username : layson-ne Index : 10
Assigned IP : 192.168.46.0 Public IP : *.*.65.201
Protocol : IKEv1 IPsecOverNatT
License : Other VPN
Encryption : 3DES Hashing : SHA1
Bytes Tx : 11667685 Bytes Rx : 1604235
Group Policy : REMOTE-NETEXTENSION Tunnel Group : REMOTE-NETEXTENSION
Login Time : 08:19:12 EST Thu Feb 12 2015
Duration : 6h:53m:29s
Inactivity : 0h:00m:00s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
ASA-5510# show vpn-sessiondb l2l
Session Type: LAN-to-LAN
Connection : *.*.56.250
Index : 6 IP Addr : *.*.56.250
Protocol : IKEv1 IPsec
Encryption : 3DES AES256 Hashing : SHA1
Bytes Tx : 2931026707 Bytes Rx : 256715895
Login Time : 02:02:41 EST Thu Feb 12 2015
Duration : 13h:10m:03s

Hi Rico,
You need to dynamic-nat (to available IP address) for both side for each remote subset to access the other remote side subnet and so they can access each other subnet as if both originating the traffic from your central location.
example:
Lets say this IP (10.10.10.254) is unused IP at central office, permitted to access remote tunnel "A" and site "B".
object-group network SITE-A
network-object 192.168.42.0 255.255.255.0
object-group network SITE-B
network-object 192.168.46.0 255.255.255.0
nat (outside,outside) source dynamic SITE-A 10.10.10.254 destination
static SITE-B SITE-B
nat (outside,outside) source dynamic SITE-B 10.10.10.254 destination
static SITE-A SITE-A
Hope this helps
Thanks
Rizwan Rafeek

3ds can not get through my wpa2

Not sure if anyone can offer any suggestions but my daughters 3ds can not get through the wpa2 security to access the Nintendo wifi network. Anybody have any suggestions as to how we can get by this?

loper wrote:
Not sure if anyone can offer any suggestions but my daughters 3ds can not get through the wpa2 security to access the Nintendo wifi network. Anybody have any suggestions as to how we can get by this?
The following links may help.
http://en-americas-support.nintendo.com/app/answers/detail/a_id/499/p/48/session/L3RpbWUvMTM3NjMzMTc...
http://www.nintendo.com/consumer/wfc/en_na/ds/firewall.jsp
If neither of these resolve the problem you should contact Nintendo customer support.

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
https://discussions.apple.com/docs/DOC-2491
MtD

TS1292 can not redeem itunes card , have tried to get help like 6 times nothing suggested via trouble shooting page has helped and can not get a person to help

I can not get itunes card to work says inactive. have followed all trouble shooting and can not get through to support via email or phone

If the card hasn't been activated properly then have you tried taking it back to the store that you bought it from and asking them to activate it properly ?
How have you tried to contact iTunes Support ? You should be able to do so via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes. If that page doesn't load then have you tried clearing your browser's cache/history and/or tried a different browser ?

I ask for help, I can not cancel a monthly subscription to Adobe! contrary to the tutorial does not appear scribed CANCEL PLAN on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charg

I ask for help, I can not cancel a monthly subscription to Adobe.
contrary to the tutorial does not appear scribed "CANCEL PLAN" on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charge?

Just to clarify: This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
Have you done a Forum search?
How can I delete my account? There is no "cancel plan" in my creative cloud free membership.
Contact Customer Care

Help I can not download the 4.2 update because doing so is stunned and then my iPhone 3G I have to take the service center to enable it I can do?

Help I can not download the 4.2 update because doing so is stunned and then my iPhone 3G I have to take the service center to enable it I can do?

See if your hardware supports Snow Leopard
System Requirements
Mac
Mac computer with an Intel processor
5 GB free hard drive space
1 GB RAM
DVD drive for installation
Snow Leopard US$19.99 order below:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Pleas help I can not buy cristal in the game clash of clans the reaso?

Pleas help I can not buy cristal in the game clash of clans the reaso?

How would we know?
What happens when you try?
Error message?
What does it say?
Any info about your issue?

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Help me! can not ping through hostname

Similar Messages

Maybe you are looking for