Help me configure my PC to develop JSP ??

Hi all .. iam an ASP developer and i decided to move to JSP development .. but i dont know how to configure my PC to run the JSP pages and where is the best editor to use .. if there are some one can tell me i will apreciate it alot ..
i have downloaded jdk1.3.1_11 .. and dont know anything else to do ..

You might want to to a trial test of Creator which is available at http://developers.sun.com/prodtech/javatools/jscreator/
Here is a free Java development tool to start with that will help you edit and run JSP files: www.netbeans.org

Similar Messages

Developing JSP pages using Eclipse 3.6

i want to build a web application using JSP pages and oracle 11i databse, so i install and configure eclipse 3.2.2 and i installed the plugin to support creating a dynamic web project and i have installed jboss 6 to be the server.
so on the eclipse i clikc new "dynamic web project" , then inside this new project i create a new JSP pages , then i write a simple code inside the jsp and i run the project using jboss and every thing went smootly.
but let say now that i want to develop a more complicated pages to add buttons , to have tabs on my page.
1. so my question is does eclipse provide a visual develpment tools ot plug-in for developing JSP?
2. where i can find some good tutorilas regarding developing JSP using eclipse 3.2.2
Thanks
Edited by: 812643 on 20-Nov-2010 17:42

Confusing isn't it? You can post questions here for specific problems you need to solve and usually get an answer (eventually). However, asking for which technologies are better will probably only provide you with biased opinions. There are many alternatives, each providing its own trade offs. I suggest searching google for articles from respected sources such as 'theserverside' rather than depend on individuals. Also, limit your search to articles that are no older than about 1 year. Lastly, try to stick with technologies that are used by the bulk of the developers and are considered almost an industry standard. No point learning some good yet obscure technology.
As far as not considering a career as a developer, I suggest you stick to it no matter what. Anything you want to be good at takes years of practice and study
(http://365pwords.wordpress.com/2009/01/25/practice-practice-practice-the-theory-of-10000-hours).
No one has a 'knack' or is born good at it (even if they claim to be), and everyone experiences frustration (20 years later, I'm still frustrated!). You advance by making countless mistakes, and refactoring over and over again. Ignore anyone who discourages you no matter what.
I think your quest should be limited to what you should learn when just starting out and not what is the best technologies for experienced users. Personally, I think learning JSP/Servlets is foundation that you should know well before considering alternatives. Also, many alternatives are based on extending JSPs and therefore you should know them well. I've always used JSP and not alternatives, so I can't comment further on that topic.
If your just starting out in web design, here are my recommendations (in roughly this order):
java -book (search amazon.com for books and reviews of what others have said in them).
practice compiling java classes from the book on the dos command line and using a text editor before moving on to
an IDE.
Eclipse IDE - just an on-line tutorial may be ok. Learn to compile code, run it, debug it.
JSP - book
Servlets - book
JUnit - just an on-line tutorial may be ok
JSTL - just an on-line tutorial may be ok (use JSTL with JSP, not scriptlets)
XHTML - just an on-line tutorial may be ok
Javascript - book
CSS - on line tutorial may be ok
Tomcat - just an on-line tutorial may be ok. You can move onto JBoss, etc later.
JDBC - book
A free database such as Oracle Lite or MySql installed. Learn how to create tables.
MVC design - read up on separation of concerns on a design (presentation,control,business, and database layer).
SQL - book
JQuery - book
Hibernate -book
Spring framework - book (only after creating an MVC web application with a single servlet as the control layer)
AJax

Need help in configuring Client to Site IPSec VPN with Hairpinning on Cisco ASA5510 8.2(1)

Need urgent help in configuring Client to Site IPSec VPN with Hairpinning on Cisco ASA5510 - 8.2(1).
The following is the Layout:
There are two Leased Lines for Internet access - 1.1.1.1 & 2.2.2.2, the latter being the Standard Default route, the former one is for backup.
I have been able to configure Client to Site IPSec VPN
1) With access from Outside to only the Internal Network (172.16.0.0/24) behind the asa
2) With Split tunnel with simultaneous assess to internal LAN and Outside Internet.
But I have not been able to make tradiotional Hairpinng model work in this scenario.
I followed every possible sugestions made in this regard in many Discussion Topics but still no luck. Can someone please help me out here???
Following is the Running-Conf with Normal Client to Site IPSec VPN configured with No internat Access:
LIMITATION: Can't Boot into any other ios image for some unavoidable reason, must use 8.2(1)
running-conf --- Working normal Client to Site VPN without internet access/split tunnel
ASA Version 8.2(1)
hostname ciscoasa
domain-name cisco.campus.com
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
interface GigabitEthernet0/0
nameif internet1-outside
security-level 0
ip address 1.1.1.1 255.255.255.240
interface GigabitEthernet0/1
nameif internet2-outside
security-level 0
ip address 2.2.2.2 255.255.255.224
interface GigabitEthernet0/2
nameif dmz-interface
security-level 0
ip address 10.0.1.1 255.255.255.0
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
ip address 172.16.0.1 255.255.0.0
interface Management0/0
nameif CSC-MGMT
security-level 100
ip address 10.0.0.4 255.255.255.0
boot system disk0:/asa821-k8.bin
boot system disk0:/asa843-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name cisco.campus.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network cmps-lan
object-group network csc-ip
object-group network www-inside
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
object-group service udp-port
object-group service ftp
object-group service ftp-data
object-group network csc1-ip
object-group service all-tcp-udp
access-list INTERNET1-IN extended permit ip host 1.2.2.2 host 2.2.2.3
access-list CSC-OUT extended permit ip host 10.0.0.5 any
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq www
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq https
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ssh
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ftp
access-list CAMPUS-LAN extended permit udp 172.16.0.0 255.255.0.0 any eq domain
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq smtp
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq pop3
access-list CAMPUS-LAN extended permit ip any any
access-list csc-acl remark scan web and mail traffic
access-list csc-acl extended permit tcp any any eq smtp
access-list csc-acl extended permit tcp any any eq pop3
access-list csc-acl remark scan web and mail traffic
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 993
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq imap4
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 465
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq www
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq https
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq smtp
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq pop3
access-list INTERNET2-IN extended permit ip any host 1.1.1.2
access-list nonat extended permit ip 172.16.0.0 255.255.0.0 172.16.0.0 255.255.0.0
access-list DNS-inspect extended permit tcp any any eq domain
access-list DNS-inspect extended permit udp any any eq domain
access-list capin extended permit ip host 172.16.1.234 any
access-list capin extended permit ip host 172.16.1.52 any
access-list capin extended permit ip any host 172.16.1.52
access-list capin extended permit ip host 172.16.0.82 host 172.16.0.61
access-list capin extended permit ip host 172.16.0.61 host 172.16.0.82
access-list capout extended permit ip host 2.2.2.2 any
access-list capout extended permit ip any host 2.2.2.2
access-list campus-lan_nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu internet1-outside 1500
mtu internet2-outside 1500
mtu dmz-interface 1500
mtu campus-lan 1500
mtu CSC-MGMT 1500
ip local pool vpnpool1 192.168.150.2-192.168.150.250 mask 255.255.255.0
ip verify reverse-path interface internet2-outside
ip verify reverse-path interface dmz-interface
ip verify reverse-path interface campus-lan
ip verify reverse-path interface CSC-MGMT
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (internet1-outside) 1 interface
global (internet2-outside) 1 interface
nat (campus-lan) 0 access-list campus-lan_nat0_outbound
nat (campus-lan) 1 0.0.0.0 0.0.0.0
nat (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT,internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
access-group INTERNET2-IN in interface internet1-outside
access-group INTERNET1-IN in interface internet2-outside
access-group CAMPUS-LAN in interface campus-lan
access-group CSC-OUT in interface CSC-MGMT
route internet2-outside 0.0.0.0 0.0.0.0 2.2.2.5 1
route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
http 1.2.2.2 255.255.255.255 internet2-outside
http 1.2.2.2 255.255.255.255 internet1-outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet2-outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map internet2-outside_map interface internet2-outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
        a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as
quit
crypto isakmp enable internet2-outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash md5
group 2
lifetime 86400
telnet 10.0.0.2 255.255.255.255 CSC-MGMT
telnet 10.0.0.8 255.255.255.255 CSC-MGMT
telnet timeout 5
ssh 1.2.3.3 255.255.255.240 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet2-outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy VPN_TG_1 internal
group-policy VPN_TG_1 attributes
vpn-tunnel-protocol IPSec
username ssochelpdesk password xxxxxxxxxxxxxx encrypted privilege 15
username administrator password xxxxxxxxxxxxxx encrypted privilege 15
username vpnuser1 password xxxxxxxxxxxxxx encrypted privilege 0
username vpnuser1 attributes
vpn-group-policy VPN_TG_1
tunnel-group VPN_TG_1 type remote-access
tunnel-group VPN_TG_1 general-attributes
address-pool vpnpool1
default-group-policy VPN_TG_1
tunnel-group VPN_TG_1 ipsec-attributes
pre-shared-key *
class-map cmap-DNS
match access-list DNS-inspect
class-map csc-class
match access-list csc-acl
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class csc-class
csc fail-open
class cmap-DNS
inspect dns preset_dns_map
service-policy global_policy global
prompt hostname context
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Neither Adding dynamic NAT for 192.168.150.0/24 on outside interface works, nor does the sysopt connection permit-vpn works
Please tell what needs to be done here, to hairpin all the traffic to internet comming from VPN Clients.
That is I need clients conected via VPN tunnel, when connected to internet, should have their IP's NAT'ted against the internet2-outside interface address 2.2.2.2, as it happens for the Campus Clients (172.16.0.0/16)
I'm not much conversant with everything involved in here, therefore please be elaborative in your replies. Please let me know if you need any more information regarding this setup to answer my query.
Thanks & Regards
maxs

Hi Jouni,
Thanks again for your help, got it working. Actually the problem was ASA needed some time after configuring to work properly ( ?????? ). I configured and tested several times within a short period, during the day and was not working initially, GUI packet tracer was showing some problems (IPSEC Spoof detected) and also there was this left out dns. Its working fine now.
But my problem is not solved fully here.
Does hairpinning model allow access to the campus LAN behind ASA also?. Coz the setup is working now as i needed, and I can access Internet with the NAT'ed ip address (outside-interface). So far so good. But now I cannot access the Campus LAN behind the asa.
Here the packet tracer output for the traffic:
packet-tracer output
asa# packet-tracer input internet2-outside tcp 192.168.150.1 56482 172.16.1.249 22
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   172.16.0.0      255.255.0.0     campus-lan
Phase: 4
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   192.168.150.1   255.255.255.255 internet2-outside
Phase: 5
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group internnet1-in in interface internet2-outside
access-list internnet1-in extended permit ip 192.168.150.0 255.255.255.0 any
Additional Information:
Phase: 6
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 7
Type: CP-PUNT
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: NAT-EXEMPT
Subtype: rpf-check
Result: ALLOW
Config:
Additional Information:
Phase: 10
Type: NAT
Subtype:
Result: DROP
Config:
nat (internet2-outside) 1 192.168.150.0 255.255.255.0
match ip internet2-outside 192.168.150.0 255.255.255.0 campus-lan any
    dynamic translation to pool 1 (No matching global)
    translate_hits = 14, untranslate_hits = 0
Additional Information:
Result:
input-interface: internet2-outside
input-status: up
input-line-status: up
output-interface: internet2-outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
The problem here as you can see is the Rule for dynamic nat that I added to make hairpin work at first place
dynamic nat
asa(config)#nat (internet2-outside) 1 192.168.150.0 255.255.255.0
Is it possible to access both
1)LAN behind ASA
2)INTERNET via HAIRPINNING
simultaneously via a single tunnel-group?
If it can be done, how do I do it. What changes do I need to make here to get simultaneous access to my LAN also?
Thanks & Regards
Abhijit

Developing JSP iViews for PCR on R/3 4.6C Backend??

I have read several posts and have looked into a lot of documentation, but there still seems to be some confusion regarding MSS/PCR and EP 6.0.
Here is some background:
We are planning to upgrade our portal from Workplace 2.11 to SAP EP 6.0 (NW04). We have an R/3 4.6C backend and we are using ITS forms for our PCRs.
When we move to the EP 6.0, I see two ways of proceeding:
1. Use IAC iView on ITS and just call our ITS based forms from the EP 6.0. This means we keep our standalone ITS.
OR
2. Develop JSP iViews for our PCR forms on EP 6.0. This way, we would no longer need ITS.
My confusion is whether I can actually do option 2. After upgrading to EP 6.0 and installing the plug in 2003.1, can I develop PCR forms using JSP iView with a R/3 4.6C backend?
Thanks,
Younoos

I am not sure anyone can give you specific guarantees regarding development and use of your own custom JSP iviews ITS or otherwise
What I can say is -->
Certainly from a SAP perspective the delivered MSS Business Package 60.1.20 (HTMLB with JSP PCRs) is useable
in the landscape versions you mentioned (46C with EP6) as per following link
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/302ecc07-a56d-2910-8fad-84996151e3b4
Therefore MSS PCRS based on JSP is possible in EP6 with 46C
Its also not clear why your ITS based forms are being abolished - if you back-end remains 46C - then presumably these should
still work - either called directly via ITS URL string given to users or integrated into EP 6 as a ITS iview or Portal HpF service calling ITS URL directly - the only reason I can think is that perhaps your ITS forms has a Workplace 2.11 dependancy or other dependancies I am not aware of.
Best wishes
Stuartr

I have a PC and a need help to configure my external hard disk on my network. Thanks

I have a PC and a need help to configure my external hard disk on my network. Thanks

If you mean you wish to plug a USB drive into the Airport Extreme router (or TC not express) that is easy..
The disk must be formatted FAT32.. as if.. stay away from FAT .. or HFS+ ie Mac OS extended Journaled.
Format the disk on a Mac is best.. and even use GUID partition scheme not MBR.
The PC has no issue writing and reading files because this is a network drive.. The PC does not write to the drive.. it writes files to the Airport OS which writes and reads the disk and passes the info using standard windows SMB.. To the windows computer it will be a Windows NT server.. FAT32 setup.
If your setup is different.. to my hugely guessed assumptions.. give details.. always helps to have.. make and model.
Make and model of disk.. make and model of router.. how the setup will be done.. what windows OS you run.. etc etc.
As it stands your question could have nothing to do with apple at all.. other than you posted in a forum so I guess there is something apple in there somewhere.

Help me in Installing Solaris Express, Developer Edition X 86

Hi,
Help me in installing Solaris Express, Developer Edition
When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
Please,Help me.
Thanking you,
P.Sathish Kumar

Hello,
first of all: Try to run the HCTS (Hardware
Compatibility Test Suite) first, it's available
here:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
l
This you can run from Windows, and it will list all
hardware that has drivers, and all those, that do not
have drivers (including some public domain drivers).
After that, you have the possibility to install
Solaris WITHOUT a GUI, use one of the two "terminal"
modes. The first Is still a GUI, as it only starts X
and opens a terminal, in which then the installer
runs. The second does NOT start X, but runs the
installer on the console. Try this one, and once you
get through that, you can afterwards figure out the
settings of the Xserver.Hi ,
i have installed the solaris using console.
Still GUI is not starting, the moniter is switched off when GUI gets started
I used Hardware Compatibility Test Suite, its say that system is supported
by Solaris.
Should i have change BIOS setting to stated the system
Bye
P.Sathish Kumar

Help me in installing Solaris Express, Developer Edition X86

Hi,
Help me in installing Solaris Express, Developer Edition
When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
Please,Help me.
Thanking you,
P.Sathish Kumar

Hello,
first of all: Try to run the HCTS (Hardware
Compatibility Test Suite) first, it's available
here:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
l
This you can run from Windows, and it will list all
hardware that has drivers, and all those, that do not
have drivers (including some public domain drivers).
After that, you have the possibility to install
Solaris WITHOUT a GUI, use one of the two "terminal"
modes. The first Is still a GUI, as it only starts X
and opens a terminal, in which then the installer
runs. The second does NOT start X, but runs the
installer on the console. Try this one, and once you
get through that, you can afterwards figure out the
settings of the Xserver.Hi ,
i have installed the solaris using console.
Still GUI is not starting, the moniter is switched off when GUI gets started
I used Hardware Compatibility Test Suite, its say that system is supported
by Solaris.
Should i have change BIOS setting to stated the system
Bye
P.Sathish Kumar

Help to Configure Connection Pool For Jdeveloper

Hi ,
I am using Jdeveloper 10.1.2 and Oravle AS 10.1.2.
Language Used : J2EE,Struts and EJB
I am portletizing struts application.
I need help to configure Connection pool. By default it is taking a datasource.xml not the one i had defined. Pls help me out. Affecting the performance due to so many hit to db.
regards,
Jayashree Jegan

Hi John,
Go through this thread of mine. You will get the required information to setup the connection pool.
SOAP adapter: WSDL issue
Also just check in Visual Studio Help .NET Connector for Connection Config class settings. You will see all the relevent parameters related with connection pool.
Regards.

Configuring the SAP NetWeaver Developer Studio

Hi,
I have to configure Configuring the SAP NetWeaver Developer Studio at AIX based system ,I have installed it on the system but getting error while configuring it,Could you please do the needful.
Thanks in advance
SS

Sanjay,
Post the error you are getting
Thanks
Bala Duvvuri

Developing JSP using SQLJ

Does anyone know how to develop JSP using SQLJ? This chapter is not availabe in the developer's guide. And which one is a better solution, JSP + BC4J or SQLJ?

I would stick with the JDK 1.1.8 in JDeveloper 3.0. SQLJ and JDBC do not yet support JDK 1.2 (they will in Oracle 8.1.6 and JDeveloper 3.1... not sure about OAS 4.0.9, but I would suspect so).
Laura

Help Me Configure New Hard Drive Setup

I'm currently upgrading my 8-Core Mac to Snow Leopard, FCP Studio 3, and CS4. I've also archived all of my editorial projects to external hard drives (leaving me with blank, scratch drives) and I'm now, exclusively using an HVX200/P2 workflow. I'm hoping some forum members can help me configure the best possible hard drive configuration for media back-up and realtime edit.
Here's what I'm working with:
• 1, internal 250GB hard drive (OS drive)
• 3, internal 500GB hard drives
• 1, CalDigit VR 1.3TB external hard drive (eSATA)
• 1, Glyph 1TB external hard drive (eSATA)
• 1, G-Raid 1TB external hard drive (FW800)
I also have several, external, FW800 drives which could get incorporated if need be but I'm leaving those out for now since they would be good for archiving. I'm anxious to hear what configurations people suggest.

Int Drive 1- OSX and apps. FCP project backups
Int Drive 2 - project & media
Int Drive 3 - project & media
Int Drive 4 - temp scratch/render files
1 TB G-raid 800 - clone of system drive + disk images of all professional software (perhaps 2 partitions to keep 2 separate back up versions)
1.3 TB Caldigit -back up of Int Drives 2 & 3
1 TB Glyph - used when needed for temp sneekernet, temp project backup, etc.
x

Welcome. At the outset, I'm sorry for my English :) Please help with configuration Photoshop CS6 appearance. How to disable the background of the program so you can see the desktop. (same menus and tools) Chiałbym to be the same effect as CS5.

Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.

Please try turning off
Window > Application Frame

Need Help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect

Hi All,
I need help on Configuring the Site to Site VPN from Cisco 2811 to Websense Cloud for web Traffic redirect
2811 having C2800NM-ADVIPSERVICESK9-M
2811 router connects to the Internet SW then connects to the Internet router.
Note- For Authentication am using the Device ID & Pre share key. I am worried as all user traffic goes with PAT and not firing up my tunnel for port 80 traffic. Can you please suggest what can be the issue ?
Below is router config for VPN & NAT
crypto keyring ISR_Keyring
pre-shared-key hostname vpn.websense.net key 2c22524d554556442d222d565f545246
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp keepalive 10
crypto isakmp profile isa-profile
   keyring ISR_Keyring
   self-identity user-fqdn [email protected]
   match identity user vpn-proxy.websense.net
crypto ipsec transform-set ESP-NULL-SHA esp-null esp-sha-hmac
crypto map GUEST_WEB_FILTER 10 ipsec-isakmp
set peer vpn.websense.net dynamic
set transform-set ESP-NULL-SHA
set isakmp-profile isa-profile
match address 101
interface FastEthernet0/1
description connected to Internet
ip address 216.222.208.101 255.255.255.128
ip access-group HVAC_Public in
ip nat outside
ip virtual-reassembly
duplex full
speed 100
no cdp enable
crypto map GUEST_WEB_FILTER
access-list 101 permit tcp 192.168.8.0 0.0.3.255 any eq www
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.187 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.181 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 host 85.115.41.182 log
access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.216.0 0.0.1.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 116.50.56.0 0.0.7.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 86.111.220.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 103.1.196.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 177.39.96.0 0.0.3.255
access-list 103 deny   ip 192.168.8.0 0.0.3.255 196.216.238.0 0.0.1.255
access-list 103 permit ip 192.168.8.0 0.0.3.255 any
ip nat pool mypool 216.222.208.101 216.222.208.101 netmask 255.255.255.128
ip nat inside source list 103 interface FastEthernet0/1 overload
ip nat inside source route-map nonat pool mypool overload

How does Websense expect your source IPs in the tunnel? 192.168.8.0 0.0.3.255 or PAT'ed 216.222.208.101 ?
Check
show crypto isakmp sa
show crypto ipsec sa
show crypto session
You'd better remove the preshared key from your post.

Problem in configuring my Laptop to run JSP files

I am having problem in testing my finished JSP files in my laptop. Everytime I run my JSP, it continues requesting for internet connections. It cannot run in an offline modus. I am using Mindows 2000, JDeveloper 3.2.3 and Oracle 9i database.I installed IIS(Internet Information Server). I need urgent help because of my school presentation.

Hi,
Please check this link and follow the guide to configure exchange online account to your IPhone:
https://support.office.com/en-SG/Article/Set-up-email-on-Apple-iPhone-iPad-and-iPod-Touch-b2de2161-cc1d-49ef-9ef9-81acd1c8e234
Since this forum is for general questions and feedback related to Office for windows, if you need further assistance on this issue, you can post in the following forum:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
The reason why we recommend posting appropriately is you will get the most
qualified pool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

Help me configure my PC to develop JSP ??

Similar Messages

Maybe you are looking for