Help me delete this footnote, please!

I am working on a 300 page document (Pages v 4.3) At the bottom of many of the pages I have what appears to be a footnote. It is the number one, and beneath the number is a small plus sign in a box. I have no idea why it is there, and can't figure out how to get rid of it. I have gone to inspector and played with footnote settings, but to no avail. I run Lion on a Macbook OS X (10.7.5).

I don't use word. Only pages. I ended up have to cut and paste all 200 pages individually avoiding the dreaded footnote number. I simply could not find anyway other way to get rid of it.

Similar Messages

My sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help

my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help

egzoni 123 wrote:
my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help
If you Restore using last computer you synced to the password will be removed and you can restore the last backup on your computer, which includes your camera roll.
If you enabled Photo Stream in iCloud your photos are in Photo Stream.
If you had installed one of the many apps that can upload photos to a photo sharing site and had used it you will have your photos.
If you have done none of these things you are out of luck. The phone comes with many tools to preserve content, but you have to use them.

Can anyone help me deleted this existing photos in my photo library.i already did to sync it up on itunes ang remove all photos ang sync.but still there is 5 photos in my general about eventhough my camera roll is empty.plsss help.thanks.

can anyone help me deleted this existing photos in my photo library.i already did to sync it up on itunes ang remove all photos ang sync.but still there is 5 photos in my general about eventhough my camera roll is empty.PLEASE HELP!Thanks.

i mean "and" not "ang" btw.

How can I delete this today, please?? FYI: Skype continues to work just fine.

since accepting the invitation to upgrade to Version 7, the following truly annoying popup box appears every time I open Firefox or one of my bookmarked sites: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [ISkypeFfExtension.Initialize]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://skype_ff_extension/content/browserOverlay.js :: <TOP_LEVEL> :: line 9" data: no]
How can I delete this today, please?? FYI: Skype continues to work just fine.

Thanks - but exactly how do I do that easily, please?

TS3694 hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

Hi ali hakim,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
http://support.apple.com/kb/TS4451
This occurs when iTunes is unable to communicate with the update-and-restore server (gs.apple.com). This is most likely because it is being blocked, redirected, or interrupted by security software, hosts-file entries, or other third-party software.
Cheers,
- Judy

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

TS1424 I get "We could not complete your iTunes Store request. An unknown error occurred (4002) Can any person help me with this on, please?

I get "We could not complete your iTunes Store request. An unknown error occurred (4002) Can any person help me with this on, please?

Turning off iTunes Match and Genius and then turning them back on appears to have worked for some people e.g.
https://discussions.apple.com/message/22059685#22059685
https://discussions.apple.com/message/18427550#18427550

I need help instantly on this program please

import java.util.*;
public class D3
          private static int[] z = new int[100000];
private static int first=z[0];
          private static int last=z[n-1];
          private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
          z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
          int binSearch(z;first;last;50000);
          int seqSearch(z;35467;n); //method call 4 key where key in the left half
          int binSearch(z;first;last;35467);
          int seqSearch(z;89703;n); //method call 4 key where key in the right half
          int binSearch(z;first;last;89703);
          public int seqSearch(int z[];int key;int n)
     long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z[i]=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
     public int binSearch(int z[];int first;int last;int key)
     long start = System.currentTimeMillis();
     int count=0;
     if(last<first){
     count++;
     index=-1;
     else
     count++;
     int mid=(first+last)/2
     if(ket=z[mid]{
     index=mid;
     else
     if(key<z[mid]){
     index = binSearch(z[];first;mid-1;key);
     else
     index=binSearch(z[];mid+1;last;key);
     return index;
     long elapsed = System.currentTimeMillis() - start;
     System.out.print("Execution Time:" + elapsed);
     System.out.print("# of Basic Operations:" + count);
// if anyone could tell me whats wrong with my code i'd be greatful...the program is supposed to perform binary and sequential search on a sorted array of 100000 numbers.once on an item in the middle of the array once on the right side of it and once on the left side...i also need to count the number of basic operations for the same number in both sequential and binary to see whats better.and i need to check the time...plz i need help now,,,

"Guide to a first-time poster"
you need to add exclamation marks to signify how urgent it is
e.g.
i need help instantly on this program please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
capital letters is better
I NEED HELP INSTANTLY ON THIS PROGRAM PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
starting the italics on line 1, better again
import java.util.*;
public class D3
private static int[] z = new int[100000];
private static int first=z[0];
private static int last=z[n-1];
private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
int binSearch(z;first;last;50000);
int seqSearch(z;35467;n); //method call 4 key where key in the left half
int binSearch(z;first;last;35467);
int seqSearch(z;89703;n); //method call 4 key where key in the right half
int binSearch(z;first;last;89703);
public int seqSearch(int z[];int key;int n)
long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
public int binSearch(int z[];int first;int last;int key)
long start = System.currentTimeMillis();
int count=0;
if(last><first){
count++;
index=-1;
else
count++;
int mid=(first+last)/2
if(ket=z[mid]{
index=mid;
else
if(key><z[mid]){
index = binSearch(z[];first;mid-1;key);
else
index=binSearch(z[];mid+1;last;key);
return index;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
and what about the dukes, offer 10 (never to be awarded, of course)
do this, then sit back and watch the replies roll in.

Hey guy can you please help me with this issue PLEASE!

Hey Apple can you please help me with this issue, i have a iPhone 3gs and when i put my sim card into the iPhone it makes iphone 3gs shut down suddenly how do i fix that?
iPhone version: 6.0.1
service provider: Vodafone nz

You could restarting your phone that sometimes fixes issues
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

Air 2.0 Auto update Feature Experts help me on this issue please.......

Hi ,
Is it possible to Auto update a air application using air 2.0 beta . If so can any one post me the related link.
I recently updated my flex builder 3 to 3.2 and along with Air 2.0. One of my old project which has a auto update feature seems to be not working
I get this error message
" VerifyError: Error #1053: Illegal override of callInContext in _ApplicationUpdaterDialogs_mx_managers_SystemManager." What should i do to over come this problem please help me .
Regards,
Rahul.

Hi Rahul,
I understand that you're using Flex 3.x SDK with AIR 2 beta 2 SDK overlay.
Make sure you're using (linking in your project) the Flex3 compatible UI lib from AIR 2 beta 2 SDK: that's the one under "frameworks\libs\air\flex3\applicationupdater_ui3.swc".
The default UI lib available with AIR 2 beta2 SDK under "frameworks\libs\air\applicationupdater_ui.swc" is compatible with Flex4.
Hope this helps,
Best regards,
Dragos Georgita | AIR Engineering

Help me sleuth this quirk, please!

While browsing various "themes" (to customize the look of the desktop), I ran across a little freebe that looked interesting and harmless, so installed it. (It was not part of a theme, but something separate.) I HATE what it does, but foolishly don't remember where this thing was installed. Surely someone can give me a hint where to look, when I tell you what it does.
(I don't know what it's called, so can't Find on it, and I couldn't come up with key words that would help me Google back to the source of this thing.)
The effect is this: documents that are not the front document on your screen become largely transparent. This is supposed to make viewing and navigating your desktop easier.
To the contrary, it's horrible. The "bleed-through" isn't just annoying, it actually makes certain things unreadable. (One example: click the Options button when selecting and setting a screensaver, and a "popout window" emerges, where you can select options; but you can't read the options because the windows become translucent, so they are overlayed, visually garbled.)
I went to various places in my Libraries, looking for something put there recently (that day), but for all my sleuthing, was unable to find what it is that's changing the look of my desktop.
Any idea what this thing might be called, genericly or otherwise, or where to look for it?
I did install ShapeShifter and downloaded some themes. But this thing, while perhaps hyped on a page that also had themes (or maybe it was from a link), was something different. (I looked at dozens and dozens of sites, so trying to go back and find them all, to scour the pages, would be difficult. And I already did a clean install recently, so would hate to have to go through that again.)
Anyone who can help me solve this will be remembered fondly for life. Is that enough? Thanks!
24" iMac Mac OS X (10.4.9)

"Themes" on OS X are what we call "haxies." While the sites that host them may say they are safe to use on OS X, don't use them. They can end up breaking your system, eating up all your computer's power, and meesing up your data.
I would suggest backing up your home folder, and then popping in a Tiger DVD or the CDs that came with your computer, rebooting the machine while holding C, and then "Archiving and Installing", OS X, to refresh the system back to it's factory, not-haxied state.
Be sure to run Software Updater several times after this to update your system.
Here is how to Archive and Install:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1103.html

Yahoo toolbar appeared without my consent. Can't get rid of it. Does not appear in list of add-ons or in list of programs installed for uninstall. (Win7; FFx5) Please help me delete this annoyance.)

I was prompted to update Java. I got a YAHOO toolbar which I did and do not want. I can't get rid of it. It does not appear on the Add-on list, not in the programs list (to uninstall). Can't find anything with Yahoo in the name. I do not want to use View, because it keeps coming back into view without my consent -- I want it gone permanently.
The uninstall directions in Yahoo help call for click on pencil tool (which tool is not found on this toolbar). Firefox instructions say go to Add-on list, but the Yahoo bar is not there. There are several Java add-ons, but I don't know what they are and what happens if they are uninstalled.
Win 7; Firefox 5.0; Yahoo toolbar ver 2.3.8.20110620112826
Perhaps it is disguised as something else. If so please tell me what to uninstall.

Try RIGHT clicking on different areas of the toolbars on Firefox, mainly try right clicking on/around the url bar & forward/back navigation buttons. When you get the correct spot if will give you a menu with the toolbars available (whether or not they're active) and a couple other options. Just uncheck the Yahoo one & you should be all set.
As you say though it may be some other bar disguised as a yahoo bar. Any chance you can get a screen shot of it & post it here?

My iMovie is not working, it tells me there's a problem but does not know the problem, Can someone help me figure this out please?

A couple of days ago, my I opened up my iMovie and it just goes into the blank screen. I am able to click on things like, "import" or "create" and it will take me into the next window, but when I choose an option, I receive a message that there is a problem, but they don't know what the problem is. It has been like this for the past couple of days. I have deleted and re-downloaded the app about 3 times and it still comes out the same. Please assist in any way possible!

Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
When it's rebooted you can force a backup via Settings > iCLoud

New GFX card, Quartz Extreme error, and suddenly FCP 6 will not run. Help me fix this problem please!

Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 3 GHz Number Of Processors: 2 Total Number Of Cores: 4 L2 Cache (per processor): 4 MB Memory: 7 GB Bus Speed: 1.33 GHz
My old GFX card nVidia GeForce 7300GT which is busted.
I replaced it with a nVidia NVIDIA Quadro FX 4500 from a Mac Pro of the same generation.
I'm now getting a Quartz Extreme error whenever I try to run Final Cut Pro 6 or Compressor. "This system does not meet the following minimum requirements: Final Cut Pro 6 requires that your system have a Quartz Extreme capable video card."
Well, I checked the specs of the card and it does support Quartz Extreme. So why isn't FCP 6 running?
Looking under the System Profiler > Graphics/Displays, it doesn't say the Cinema HD Display supports Quartz Extreme, but how could that be, because the Quadro 4500's specs online says it does?!! This was the better GFX card made for the same generation of Mac Pro but somehow doesn't work!
This is also effecting my DVD player App with an error: "A valid video device could not be found for playback: -70017". Which has never happened before either.
I've researched online and can't find anything that works.
The card has power running to it and the monitor is hooked into the closest DVI port to the logic board which most of people with the same problem have done to fix this. I've also gone into the Disk Utility and ran both Verify and Repair permissions and the same for the boot disk.
Nothing. I'm stumped. Short of trying to flash the ROM on the GFX card I'm not sure what to do. And I'm not comfortable doing that. Help please?
I'm using Final Cut Pro 6 and subsequent older versions of Motion and Compressor, not FCP X or companion series.
HELP!!!!

You should go to the Mac Pro community to get a better audience.
https://discussions.apple.com/community/desktop_computers/mac_pro

Help me delete my emails, please

Hello everybody - hope someone can help me. Up until recently I had two ways to check my emails: my computer at home Outlook Express, and when away, I went into BT Yahoo on other computers. Now my daughter has bought me an iPad which is great BUT there is nothing more annoying than getting home to find all the emails I deleted whilst I was away pop straight into Outlook Express! I went into iPad settings to sort it, but it isn't sorted,Furthermore, BTYahoo has jumped on the bandwagon, so on my computer, the emails now come into both, whereas before, if I opened OE and deleted them, they didn't appear in BTYahoo, and vice-versa. Nothing worse than getting all your emails three times! Any ideas?

valeofeveshamlady wrote:
Hello everybody - hope someone can help me. Up until recently I had two ways to check my emails: my computer at home Outlook Express, and when away, I went into BT Yahoo on other computers. Now my daughter has bought me an iPad which is great BUT there is nothing more annoying than getting home to find all the emails I deleted whilst I was away pop straight into Outlook Express! I went into iPad settings to sort it, but it isn't sorted,Furthermore, BTYahoo has jumped on the bandwagon, so on my computer, the emails now come into both, whereas before, if I opened OE and deleted them, they didn't appear in BTYahoo, and vice-versa. Nothing worse than getting all your emails three times! Any ideas?
Depending on how you use email, some would consider this a useful feature rather than an annoyance

Help me delete this footnote, please!

Similar Messages

Maybe you are looking for