Help me dowload itunes on win xp sp2

I have windows xp sp2 an cannnot download the latest itunes. the display message says i have insufficient privilages and to change them . I am the sole user. Help. Nothing i seem to do makes a difference. Any ideas anyone??

Please help someone. Its drivin me crazy!!!!!!

Similar Messages

  • HT1923 unable to dowload itunes on win 7

    update came up and keeps stopping now I cant even open itunes!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Itunes for win 98

    Plaese!!
    I cant dowload itunes for win 98, the qyuestion is: there are in somewhere this program? or im completly lost?
    hp pavilion   Windows 98  

    if i want sincronyze the ipod with computer. i must change my operative system?
    hp pavilion   Windows 98  

  • Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified

    Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified.I
    I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone.  Anyone facing the same issue or can point me in the right direction?

    You may get better information on that error message by reposting in the iPhone forums:
    iPhone
    It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than  just "G4" will get you help faster.

  • Why can not I install iTunes on Win 7 installation appears every time the next sunrise; service, apple mobile device, failed to start verify that you have sufficient privileges to start system services  Please help me

    Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
    service, apple mobile device,
    failed to start verify that you have sufficient privileges
    to start system services
    Please help me

    The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562

  • Error contion iTunes for Win 7

    When i want to connect my iTunes there is problen , in attach ill post the pic.
    Pls help me???

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Help!! Itunes is messing up my computer...it freezes everything, i cant get on itunes store, and it wont sync! I already tried uninstalling and reinstalling...no luck!

    Help!! Itunes is messing up my computer...it freezes everything, i cant get on itunes store, and it wont sync! I already tried uninstalling and reinstalling...no luck!

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.

  • Error on installing iTunes under Win 8

    Error on installing iTunes under Win 8
    I have recently upgraded to Win 8.  When installing iTunes the following error shows:
    "An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32",version"8.0.50727.4053.publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="amd64". Please refer to Help and Support for more information HRESULT:0x80073715.
    I am running the ITunes x64 install.  I have installed the V++ redistributable with no change in result.
    I have subsequently downloaded and manually installed via the Apple Software update program iTunes.  However this does not allow my iPad to be connected as it is not the x64 version.

    After spending an entire day on this issue, I figured out something that worked.  After installing Windows 8 (64-bit) then Visual Studio 2012 (or 2013) then the latest 64-bit iTunes app, I got the 0x80073715 error.
    What finally worked for me was:
    1) Get all the Windows updates and hotfixes - especially the ones for Visual Studio.
    2) Go to http://www.microsoft.com/en-us/download/details.aspx?id=14431 and download the "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"
    3) Only install vcredist_x64.exe.
    After running these steps, I was able to completely install iTunes on my Windows 8 64-bit instance. 
    Hope this helps.

  • MiniSAP Navigator Problem Win XP SP2

    I am using the SAP Mini Basis System to practice ABAP programming. My problem is that in the Object Navigator, the Object List Selector is not displayed. This problem was already described here in an earlier discussion.
    I am using Win XP SP2, SAP GUI 6.20 (from Galileo Press book ABAP objects). Is there an other patch around? My problem is that I cannot download from SAP Service since I am not a customer. Any help would be appreciated.
    The original topic is
    Re: Object Navigator

    Everyone,
    http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
    Thats the GUI update patch. That works.
    Install it. Reboot PC and restart miniSAP. Use new shortcuts created and enter new host in SAPlogon.
    You should be fine,
    Any issues, I can walk you through the process.

  • HT202159 Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Hi aaronvilla,
    Sorry to hear you are having issues with your iTunes Store purchase.   The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • Problems with wireless mouse in win xp sp2

    I recently installed Windows XP2 in a Bootcamp 3.0 partition on my iMac 27". After installing the Apple drivers from the Mac OSX disk everything seems to work fine except for the Magic Mouse which does not respond at all. A wired USB mouse works fine, and, strangely eonough, when I access the Bootcamp partition through VMWare Fusion 3.0, the Magic Mouse works fine.
    I tried uninstalling and re-installing the Apple drivers but that didn't work. When I look in Device Manager in Windows, under Bluetooth Radios, there is a Microsoft Bluetooth Enumerator at Location:Apple Wireless Mouse and an Apple Wireless Mouse at Location:0. Could this be causing the conflict? I tried uninstalling the Microsoft Bluetooth Enumerator but it gets automatically re-installed at the same location when I reboot Windows.
    Any suggestions on what I can do?
    Thanks in advance
    Javed Shakoor

    Hi Stefan,
    Thanks for your response. As you advised I set a System Restore point and installed Bootcamp 3.1. After I restarted the computer, the message "Found New Hardware: Apple Wireless Mouse" appeared briefly above the task bar, then it disappeared. The usual message which comes after this, telling you that the new hardware is ready for use, did not appear.
    And whats more important, the wireless mouse still refuses to work!
    When I go to Bluetooth Devices in the Windows Control Panel, the Apple Wireless Keyboard is shown as connected, but there is a "macbook 1's mouse" in the list which is not shown as connected.
    As I said earlier I am still running on Win XP SP2. I am wondering maybe SP2 doesn't work with the new Apple wireless mouse. Do you think I should set another System Restore point and upgrade to SP3?
    In the Windows Device Manager, under Bluetooth Radios, there are two devices:
    1. AppleBroadcom Built-in Bluetooth at Location 0 (Bluetooth USB Host Controller}
    2. Microsoft Bluetooth Enumerator at Location on Apple Broadcom Built-in Bluetooth
    Both these devices are shown as working properly. However, does it seem to you there is a conflict there?
    Thanks for your help so far, and apologies for the long list of questions.
    Javed

  • Please help about update itunes version 10.6.1

    I update itunes to version 10.6.1 and when i use itune my computer run 100% of cpu all the time. When i uninstall apple mobile device support my computer's CPU run normally.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • SCOM 2007 server OS upgrade from 32 bit Win 2003 SP2 to Win 2008 R2 64 bit

    Dear Experts,
    We are planning to upgrade where in SCOM 2007 R2 presents on 32 bit Virtual Machine Win 2003 SP2 to Win 2008 R2 32 bit or 64 bit. Though OpsManager Database is already upgraded to SQL 2008 R2 from SQL 2005. So No pblm with DB upgradation.
    So my point is If I go ahead to upgrade from Win 2003 (SCOM 2007 R2 resides) to Win 2008 R2 does it create any impacts on SCOM 2007 R2 environment ? Please let me know the procedure for this or any documentation is available to complete this.
    Thanks in advanced!
    Saravana Raja

    Firstly,
    Please note that you can only upgrade an OS to the same architecture (i.e. from x86 to x86, and not to x64). See the following Support Article about supported upgrade paths for Windows Server 2003: https://support.microsoft.com/kb/951041?wa=wsignin1.0.
    Therefore, if you plan to upgrade to a x64 architecture, you will need to perform a new installation, and not an in-place upgrade. If you are going that route, I'd suggest skipping Windows Server 2008 R2, and try to push to Windows Server 2012 if not Windows
    Server 2012 R2; to more future-proof your environment.
    Further, If you are going to perform a new OS installation (to move into x64 architecture), why not also utilize the "new installation" requirement in that scenario to also upgrade to System Center 2012 R2 Operations Manager?
    The base scenario would be for you to perform an in-place upgrade of Windows Server 2003 x86 to Windows Server 2008 R2 x86. Except, there is no x86 version of Windows Server 2008 R2, only x64! Note: Windows Server 2008 (without the 'R2') has an x86 option.
    --- If you found this post/reply helpful, please visit my personal blog for more helpful articles. --- AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud) LinkedIn: http://ca.linkedin.com/in/adinermie Website: http://AdinErmie.Wordpress.com

  • Graphic card prob on PM8M3-V using Win XP SP2

    Hi guys, i having a problem wif my GC using win XP SP2 on MSI PM8M3-V. I'm using Geforce 2 MX 400 AGP 4X, 512 DDR 400 and 40 GB WD ide hardisk. Last time when i'm using win XP SP1, it work jus fine but only when the correct driver version install. When i check the graphic card information on the nvidia driver, it shows the bus as PCI instead of AGP 4X. This one cause no prob to my PC but when i using the newer driver version, it shows AGP 4X but this one makes my PC hang a while and blue screen of death come out and then my PC restart when i trying to access to video file. Same prob happen to Win SP2 even when i use the correct driver version. The built-in VGA works juz fine but it sucks in games. Can someone help me wifth this prob? Thanks

    Hello!
    I don't completely understand, but you can relax a bit. DeviceManager calls the graphics card PCI even if it is AGP. Used to worry me too, I can tell you.
    Hope the on-board card is disabled in BIOS.
    Can you tell us please what processor and what Power Supply Unit you have got?

  • ITunes on win 7 dies trying to get to ipad apps

    Upgraded to  iTunes 11.1.1.1 on Win 7. Now when I connect to my iPad (iOS 7.0.2) I can do everything except go to the apps tab. When I select this tab I get a dialogue box about itunes not working and all I can do it kill it..... any ideas?

    Hello JohnFarley,
    It sounds like you are unable to view or sync your apps to your iPad from iTunes because the program becomes unresponsive when you click the apps tab. I have a few recommendations for this issue. First try restarting both the computer and the iPad, then test the issue again.
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If this does not resolve the issue I would next troubleshoot iTunes for 3rd party plug ins with this article:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    If needed, I would next use this article to help troubleshoot the iTunes application:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1717
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for