Help me, driver touchpad hp dv6-6038tx

I have just reinstalled window 7 for mHp DV6-6038tx but no driver's touchpad - hp dv6-6038tx
anybody has got help me? tks
This question was solved.
View Solution.

Hi,
Try the Synaptics driver on the link below.
http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52661.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Can't setup driver TouchPad Driver (Synaptics, Cypress) windows 8 on lenovo U400

can't setup driver TouchPad Driver (Synaptics, Cypress) windows 8 on lenovo U400
The windows show message :
Can't you help me !

It doesn't work, i found a Dell XPS 13 driver and it works perfectly with my U400. Even multitouch and the new W8 gestures work.
http://downloads.dell.com/FOLDER00813129M/1/Input_Cypress_W7_A03_Setup-03PDC_ZPE.exe

Can I use a flash drive in my DV6-1320SD?

Can I use a flash drive in my DV6-1320SD?
And if so, what specs do I need to look for?
As far as I know, a flash drive is additional to the existing hard drive, not a replacement. Could you keep the old hard drive as a seperate data drive, inside the laptop, and work from the flash drive?

Not the way you are thinking. Your model is a generation behind the laptops that have a place for a miniature solid state drive. The only "flash" (solid state) drive you can use is one that is the same size and connection as a regular laptop hard drive (2.5 inch SATA) and it would replace, not be in addition to, the regular hard drive. Having said that, the price of solid state drives is just now becoming somewhat reasonable and the performance gains have to be seen to be appreciated.
Post back if you want to explore buying, installing and loading software on a solid state drive.

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Audio driver HP Pavilion dv6 is not working, help!!

Hi HP Support Forums.
I'm writting from Perú.
I have a hp dv6-6b03es laptop with beats audio and the original software was Windows 7 Home Ultimate 64 bits. However, I just formatted my laptop with Windows 7 Professional 32 bits. Now i have audio problems, Every time I turn my laptop audio is not heard and I have to reinstall the audio again. Every day! and some time never works
In the webiste support i can't find my operating system(Windows 7 - 32 bits)
Please help me

Hi,
Try the following.
Download the following IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done,

Help me, driver's HP G42- 455TX .

Dear Modes!
I've just reinstalled window7 ultimate-32 bits for my laptop HP G42- 455TX but lacks some drivers.
please help me to get enough.
1, AMD High-Definition Graphics Driver
2, Realtek High-Definition (HD) Audio Driver
3, Synaptics TouchPad Driver
waiting.......for your linking.....!!!!!
Hanoi, Thanks you so much!
Best regard!
Trungpham,

Your software & drivers page is here:
http://h10025.www1.hp.com/ewfrf/wc/product?product=5041148&cc=us&dlc=en&lc=en&query=G42-%20455TX&too...=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Error: DVD drive won't read or write discs. TS-L633R CD-DVD drive. HP DV6-3120US notebook. Win 7.

Product Name and Number:
HP Pavillion dv6-3120us
OS
Windows 7, Home Premium. 64-bit.
Error Message
"Insert a Disc; Please insert a disc into E: drive."
Background
Pre-installed Windows 7 system on computer recognized CD/DVD ROM drive for about 3 months. Malware corrupted the OS. I re-installed the OS from the recovery drive's partition. CD/DVD ROM drive failed to read or write, and I cannot restore old files or back-up current configuration via CD/DVD ROM drive. All updates for Windows 7 and hardware drivers seem to be installed and up-to-date as of 10/4/2011.
Troubleshooting Steps
1. Tried to read audio CD. Same error message.
2. Tried to read data CD-ROM. Same error message.
3. Tried to read data DVD-ROM. Same error message.
4. Writing to DVD ROM failed. Same error message.
5. Re-loaded OS 2nd time. No change. Same error message.
6. Checked with HP Support Assistant. DVD drive is recognized, but not media. No change.
7. Checked Device Manager. DVD drive is recognized as TS-L633R.
8. Driver is cdrom.sys version 6.1.7600.16385. Clicked Update Driver, no change.
9. Tried uninstalling and re-installing the driver. No change.
10. Checked BIOS. AMD Turion II P540 Dual Core processor 2.4Ghz. BIOS appears to be up-to-date, version F.27.
11. BIOS lists CD/DVD ROM drive as bootable. Re-ordered drive to boot first and used Knoppix Linux boot disc, no change. Windows booted instead.
12. Reviewed registry for "upper filter" and "lower filter" entries. Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper filter or lower filter entries present. No change.
13. Ran "Hardware and Devices Troubleshooter"; it cannot detect the cd/dvd. No change.
The drive has power, spins, is recognized by Windows 7 and the BIOS. However, it will not read or write CD ROM or DVD ROM discs.
I'm out of options. What else can I do to make the cd/dvd rom drive read and write cds?
Thanks for your help. Matt
This question was solved.
View Solution.

Update:
I chatted online with Ben S. at HP tech support via the HP Support Assistant. Helpful guy. Thank you, Ben. He worked through it and his counterpart Alan is sending me a new DVD/CD drive. Ben S checked the following:
1. Confirmed that I had tried multiple discs to check different formats: DVD-R, CD-RW, audio CD, video DVD, software data CD. None were recognized.
2. CD/DVD icon appears in My Computer. Confirmed.
3. Checked Device Manager for yellow exclamation marks. None present.
4. Opened below Device Manager and checked for yellow exclamation marks. HP CDDVDW TS-L633R ATA device listed correctly. Redundant, but I understand; it's a good check.
5. Confimed the Model and Serial Number.
6. Asked whether I had done a System Recovery. I had. Twice. First time it didn't restore the drive, so I thought I'd try it again. Second time also did not restore the drive.
7. Ben S. concluded that the drive has a hardware malfunction, and offered drive replacement under warranty since I purchased in April. I should have it by Oct 17, and then I have 15 days to return the broken drive or I'm charged $80.
Alan offered an additional year of warranty service for about $100. Ben's guess on the root cause was a bad lens from stress on the DVD tray. I don't recall any stress events. I've had this laptop since April, 2011, and the drive failed at the end of September. 7 months. This surprised me considering I've got other notebook computers with drives that have lasted years and still haven't failed.
I'll check in when I get the replacement drive.

Can't install driver touchpad on win7 64bit

Hello , I have a problem when installing the touchpad driver on win7 . I can not install multitouch mouse , but success on win8 .
I have tried many of win7 but similar results . Please help me . thanks!
thank

Hi @HungVo ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Probook 450 g and issues with the mouse drivers. The Synaptics Driver in Windows 7 comes with mouse drivers. Unless you are using a USB mouse which would use the Plug n Play drivers. Here is a download that might help.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Fingerprint scanner not working_Can't re-install fingerprint scanner driver on my dv6-1080el

Hi all!
I'm facing a really annoying issue with the fingerprint scanner on my hp dv6-1080el.
I recently switched to Windows 7 professional 64 bit (3 weeks ago) and installed all the drivers needed (fingerprint scanner included).
After few days in which the systems was perfectly working, following a windows automatic update -I guess- the fingerprint scanner stop working. Then, I tried to re-install the driver (original one downloaded from hp site: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75502-3&cc=us&dlc=en&lc=en&... but every time I do that, I got this error message:
An error occurred during the installation of assembly
'policy.8.0.Microsoft.VC80.CRT.type="win32policy",version="8.0.50727.762"publicKeyToken="1fc8b3b9a1e18e3b",processorArchiteture="amd64"'.
Please refer to Help and Support for more information.
Obviously, before doing that, I uninstalled the device in the "device manager" and then, once the system is rebooted, windows automatically install (successfully) the driver for the biometric device and according to what written in the device status the device is "working properly".
Actually I cannot even see the fingerprint scanner icon when I log on to the system, so the device is clearly not working.
Can someone tell me how to solve this issue?
Thanks in advance to everybody can help me on this!

Hi @Anni_V
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you updated your system to Windows 7 professional. All was working well until an automated Windows update was installed and now the fingerprint reader is not working.
You have tried to reinstalling the original driver but receive an error when trying to uninstall it.
Would you try deleting the driver and not uninstalling it.
There is also a Digital Persona Fingerprint Reader Software(null) ,have you tried deleting/uninstalling and reinstalling it?
If the issue remains, as it was working until the update was installed you can try a restore or removing that particular update.
Using Microsoft System Restore (Windows 7)
To view the installed updates go to the control panel/programs and features/view installed updates.
If you believe the updates caused the issue you can
If the recovery partition is still intact you could try reinstalling the driver from it. Using Recovery Manager to Restore Software and Drivers (Windows 7)
I hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Is it hard to fix bad segments on a failed Hard Drive?? DV6

I have a DV6-2066dx and my hard drive died on me (Error 303). I took it to get looked at and they say that I have bad segments and I should buy a new HD.
My question is, can I fix the segments myself to recover any data and what type of HD should I buy??
I really like my notebook, just ticked off that I have to replace this out of nowhere...

I also stand by my response.
It is not a "best practice" to use a device to store what could be critical data on a hard disk if it has been flagged by POST or S.M.A.R.T. tests. Replacement of the hard disk is the best option.
best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Please Help.. HP Pavilion DV6 Notebook has totally stopped working

Hi
If anyone can help me I would be grateful. My computer just stopped working today and left me with a blank screen, when I try to turn on I just get the HP logo. I have run a hard disk and memory test and they both came back OK.
I have my life on here and when I took it to the Geek Squad they said it was probably the hard drive and wanted tons of money to TRY and fix it.
I have a blank black/blue page, I have removed the battery and tried a hard start, I replaced the battery, I do have a flashing caps lock light and my mouse pad is illuminated.
I don't know what to do next and have my life on this computer including many family photos that cannot be replaced.
Any help or ideas would be gratefully received
Thanks

Hello Nikki7,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Since you are facing a Boot issue on your HP Pavilion DV6 Notebook PC, please click on the web links given below should be able to help you to resolve the issue on your unit.
HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
HP Notebook PCs - Blank Screen LED Error Codes
HP Notebook PCs - Troubleshooting No LED Lights Glow During Startup or Boot
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
* Click on "Purple Thumbs up" button to the left side of my post to say thanks!
Regards
Ahmed

Urgent Help Please. Touchpad Freezing.

OS Name   Microsoft Windows 8.1 with Bing
Version   6.3.9600 Build 9600
System Type   x64-based PC
System SKU   K7H92ES#ABU
Processor   AMD A4-5000 APU with Radeon(TM) HD Graphics, 1500 Mhz, 4 Core(s), 4 Logical Processor(s)
Hello, could someone please help me.
My laptop is not even 6 months old- and the touchpad is randomly freezing (the rest of the system appears to work fine , it's just the touchpad)
This is becoming really frustrating as I rely on the computer daily for work. Sometimes I have to reboot for it to re-work and then freeze again!

First remove your original driver. Go to Device Manager. Right click and uninstall. Then install the link below. Please, note use this method if you have an external mouse, if you don't just install the software.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709373&swItemId=ob_145252_1&swEnvOid=415...

Can't turn off touchpad on DV6

I have a dv6 6c35dx and after upgrading to Windows 8 the touchpad could not be turned off by double tapping the top left corner( Where the little square is) even after installing the drivers. Help?
This question was solved.
View Solution.

Hi AKenshin,
Sometimes it is more like a double "squish, squish" - a pretty firm double tap motion. You do not want to smash the TouchPad; it does sometimes take a bit more than a light, casual, "There you are, nice little TouchPad" kind of tap.
You can also opt to have the TouchPad turn itself off when you have an external Mouse connected - very nice
TaskBar > TouchPad Properties > ClickPad Settings >
OR
Control Panel > Mouse > ClickPad Settings >
CHECK "Disable internal pointing device when external USB pointing device is attached"
You can opt to have the TouchPad set less sensitive when you type
TouchPad Properties > TouchPad Settings > Smart Sense > Click Settings Wheel > Set desired levels and areas
Using and Troubleshooting the TouchPad (Windows 8)
Dragon Notes:
To get to some of the features in the TouchPad, you need to open the TouchPad Properties from your Taskbar and then click on that feature to activate that menu item. Once the item is "highlighted", sometimes a "spikey blue wheel" will show up just to the right -- this is the "settings" for that TouchPad feature. Clicking on the Settings wheel will open the feature settings options so you can set the actual features AND get a bit of help on that feature.
Good Luck!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
See a Post that is useful - or that teaches you something you did not know?
Your HP Experts are here to help.
Click the Kudos Star! It is a great “Thank You” for the Author.
Year of the Dragon 2012 Year of the Snake 2013
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Kind Regards,
Dragon-Fur

Help Recovering my HP Pavillion dv6

Hi there!
I am currently using a HP Pavillion dv6. My operating system is Windows 7 Home Edition, to which I upgraded to after originally having Vista. I do not have recovery disks and was looking for a simple step-by-step guide to restoring my computer back to it's factory settings. I have already backed-up my important files. I am encountering a problem though, my computer fails to pick up when I press F11 during the booting screen. Please let me know what steps I should take to fix my problem!
Thank you!

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
When you installed Windows 7, the "F11" link to the HP Recovery partition was broken. Please mark the HP Recovery partition "Active" by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - Partitioning and Naming Hard Drives (Windows 7) for information about using the Windows Disk Management Console. Also see Microsoft - What are system partitions and boot partitions? which states "the term, active partition, describes which system partition (and thus which operating system) your computer uses to start."
If the above instructions didn't work and you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Keyboard and Touchpad Questions - dv6-3155dx

I recently bought an HP dv6-3155dx from bestbuy.
Best Buy dv6-3155 link
I liked almost everything about it except the keyboard layout and how the touchpad functions.
It says it has an Island-style keyboard. I didn't know what that meant until I got it.
The left-most keys are not the usual ctrl, shift, caps lock, tab, `~, esc.
Instead I have a set of keys I will never use.
Is there some kind of replacement keyboard where those keys are gone or swapped on the other side?
If not, is there a way to change the functions of those keys?
(Its really bugging me, since I'm used to pressing ctrl+shift+esc all the time. It's really throwing me off.)
Next is the mouse.
Every time I try to left/right-click I notice that the mouse move a bit, causing me to often miss what I'm trying to click.
I was wondering if there was a way to make it to where if I effectively 'kill'(sorry for the terminology) that area of the touchpad for mouse movement.
That or only work If I move the mouse from the area above the button lines.
(There are lines showing where the button positions are.)
That way the mouse only reacts when I actually want it to.
Thank you in advance =)

I had found an alternative keyboard for the DV6 online for about $30. Don't remember where, I'll try to find and repost a url. The hp manuals available online show how to replace the keyboard, FYI. Looks pretty easy actually.
Haven't found an alternative touchpad or driver yet. If you do find something post back.

Help me, driver touchpad hp dv6-6038tx

Similar Messages

Maybe you are looking for