Help me Enabling SNC tab

Hi Experts,
We have multiple ECC 6.0 Systems where SNC tab is missing in SU01. We need to enable SNC tab in SU01 for ECC 6.0 release. This tab is available in newer versions. Please suggest how can I make the SNC tab available in older or ECC6.0 releases.
Thanks,
Ajay.

Hi Juan,
Thanks for your response. As you said I have tried to enable profile parameter snc/enable=1 but dialogue processes are ending soon after SAP system start. I have also set the other parameters and for snc/identity/as the SPN is not set for SAPServiceSID, so dialogue process are ending soon and I cant login and check SNC tab in SU01.
As other option I have compared ECC and NW 7.0 systems. NW 7.0 has SNC tab but the ABAP and BASIS components are at level 09 where as ECC has at level 11. but PI and BW are at 9 for NW 3 for ECC. Kernel is latest 254 for NW and 169 for ECC.
So Could you please tell me with what component does the SNC feature will be available in SU0. Does this depends on SP level or Kernel level?
Thanks in advance.
Thanks,
Ajay.

Similar Messages

Enabling SNC on SAP Server

I am trying to enable SNC on SAP Server. I have downloaded the SAP Cryptographic library and installed it as per in the instructions in http://help.sap.com/saphelp_erp2004/helpdata/en/96/709b3ad94e8a3de10000000a11402f/frameset.htm
Using STRUST transaction I created a PSE for SNC.
I have modified with the instance profile (using RZ10 transation) and specified the following values
snc/enable - 1
snc/accept_insecure_rfc -1
snc/accept_insecure_gui - 0
snc/accept_insecure_cpic -1
snc/permit_insecure_start -1
snc/data_protection/min - 2
snc/extid_login_diag -1
snc/extid_login_rfc - 1
and restarted the SAP Server.
I got the following error
trc file: "dev_w7", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Nov 16 18:44:31 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 5840
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 7 5840) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F90040, size: 3192688)
M DpShMCreate: allocated sys_adm at 05F90040
M DpShMCreate: allocated wp_adm at 05F91B58
M DpShMCreate: allocated tm_adm_list at 05F94478
M DpShMCreate: allocated tm_adm at 05F944A0
M DpShMCreate: allocated wp_ca_adm at 0623B0E8
M DpShMCreate: allocated appc_ca_adm at 06240EA8
M DpShMCreate: allocated comm_adm_list at 06242DE8
M DpShMCreate: allocated comm_adm at 06242E00
M DpShMCreate: allocated vmc_adm_list at 06289AD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06289AF8
M DpShMCreate: allocated wall_adm at 06289B00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Nov 16 18:44:32 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 43
C patchcomment View with literal containing (0x60) (786638)
C np:(local) connection used on SAP50UNI
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:33 2007
C Provider Release:08.10.1830
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:44 2007
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes
C Using shared procedure name cache SAP50UNI_EUCEUC_EUC_MEM initialized by another process.
C Connected to db server : [SAP50UNI] server_used : [np:(local)], dbname: EUC, dbuser: euc
C pn_id:SAP50UNI_EUCEUC_EUC
C Not using MARS (on sql 8.0)
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20071116 184432 SAP50UNI
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Fri Nov 16 18:44:52 2007
I MtxInit: 7 0 0
M SHM_PRES_BUF (addr: 0A650040, size: 4400000)
M SHM_ROLL_AREA (addr: 5F030040, size: 159744000)
M SHM_PAGING_AREA (addr: 0AA90040, size: 72089600)
M SHM_ROLL_ADM (addr: 0EF60040, size: 1595440)
M SHM_PAGING_ADM (addr: 0F0F0040, size: 525344)
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F180040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 08060040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 140600C8, size: 30000000, end: 15CFC448)
B dbtbxbuf: Buffer TABLP (addr: 15D000C8, size: 10240000, end: 166C40C8)
B dbexpbuf: Buffer EIBUF (addr: 166D00D0, size: 4194304, end: 16AD00D0)
B dbexpbuf: Buffer ESM (addr: 16AE00D0, size: 4194304, end: 16EE00D0)
B dbexpbuf: Buffer CUA (addr: 0FC300D0, size: 3072000, end: 0FF1E0D0)
B dbexpbuf: Buffer OTR (addr: 16EF00D0, size: 4194304, end: 172F00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): Trying builtin default as a
N gssapi library name: "sncgss32.dll".
N SncInit(): snc/gssapi_lib UNDEFINED in profile!
N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
M *** ERROR => DlLoadLib: LoadLibrary(sncgss32.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 7
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 7 5840) [dpnttool.c 357]
I am unable to connect to SAP Server using SAP GUI.
Any help on this is appreciated.
Thanks

you have two problems (read the log):
> C Failed to initialize provider SQLNCLI. See note
> #734034 for more information.
> C Using provider SQLOLEDB instead.
> C OpenOledbConnection: Failed to set MARS property.
Check the mentioned note.
> SncInit(): Trying builtin default as a
> gssapi library name: "sncgss32.dll".
> ncInit(): snc/gssapi_lib UNDEFINED in profile!
> N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
> M *** ERROR => DlLoadLib:
> LoadLibrary(sncgss32.dll) Error 126 [dlnt.c
> 237]
> Error 126 = "The specified module could not be
> found."
> *** ERROR => SncPDLInit():
> DlLoadLib("sncgss32.dll")=DLENOACCESS
> [sncxxdl.0340]*** ERROR =>
> SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll
> not loaded
> N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
> N sec_avail = "false"
> M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001)
> [thxxsnc.c 223]
> M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT)
> [thxxsnc.c 225]
> M in_ThErrHandle: 1
> M *** ERROR => SncInitU (step 1, th_errno 44, action
> 3, level 1) [thxxhead.c 9413]
the log clearly sais, what to do... what is unclear?
Markus

Cannot enable SNC in SAPlogon with alternative IP address in SMLG groups

Hello everyone,
I am looking for someone who has overcome the following situation:
We run SAP Enterprise on Unix (640 kernel). The systems have 2 networks - one for internal server communications and one for end-user connections. This requires that in our production logon group (multiple servers) that we specify the end-user IP address as an alternative IP in SMLG (otherwise SAP returns the internal network IP to the client).
However, when I try to enable SNC in SAPlogon to the production logon group, the "enable SNC" flag is grayed out. I have also tried to manually configure the entry in saplogon.ini. This results in a logon balancing module error. All of this seems to be described in OSS note 913356. The note is not very clear, but seems to list a corrected kernel level for version 4.6D. Thinking that this might be true for 640, I updated the kernel to 640 patch 159. This did not resolve the problem.
I should also state that direct saplogon connections to production with SNC do work. The problem appears to be in the logon module.
Has anyone else experienced this situation? Any help would be highly appreciated.
Paul
Basis Admin, Medrad

> Hi Paul,
>
> I would read the note like SNC only being available
> starting with NW2004s (700 kernel).
>
> Regards, Patrick
Saying that "SNC is only available starting with NW2004s" could be missinterpreted. Instead, I think it is better to say that "When using load balancing with SNC, for logon to SAP, and using an alternative IP address only works out-of-box with NW2004s". We have many customers using SNC authentication products with load balancing on releases prior to NW2004s, so this patch must be required only because of the alternative IP address being added to the logon group configuration.
Thanks,
Tim

Enable Provisioning Tab in Service Attribute in Master Item

Hi All,
In Item Master service tab, we have Enable Provisioning tab. What is impact of tab on Serviceable Item?. What will happen when I will enable tab, whether It will impact on Item Instance creation in Installed Base.

what is the logic you have put in to indentify cost center's supervisor?
is it based on any material group or value or storage location....?
irrespective of Requestor's ID if your validation says that PR should first go to supervisor and then to cost center's manager then why we are concentrating on requestor's ID.
but if ur business says, there must be Requestor ID in each and every PR, then as I mentioned earlier put check on EBAN -AFNAM
if EBAN -AFNAM is valid SAP R/3 user (SU01D), then no issue. if NOT then system should display an error message saying that " Requestor is not a valid one, please choose appropriate one
hope this will help you
Edited by: deshamol on Jun 10, 2009 8:45 AM
Edited by: deshamol on Jun 10, 2009 8:45 AM

I have installed ios7 on my iPad 4. After installation it asked me pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6.

I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

HT201401 Need help to enable my 3g iPhone which has been disabled due to forgotten passcode

HI....Need help to enable my3G iPhone which has been disabled due to forgotten passcode.Thank you

If you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode and restore as a new device. See http://support.apple.com/kb/HT1212.

SNC tab on SU01 - make it invisible or uneditable

Dear all,
We are looking for a alternative to make this tab/field SNC unchangable or invisible in SU01 ?
Could you please suggest ?
Thanks in advance and best regards,

You can use the same approach (transaction variant) as in your previous question about the SMTP address, particularly if you have already made that change.
Other options you might want to take a look into:
- If I remember correctly, the check in SU01 SNC tab is the same as the check in SNC1 => it is checking the maximum authority. They user needs * for the user group of object S_USER_GRP. Please check that to see whether exclusing something will prevent use of it completely.
- I heard about BAdI's which have replaced the previous user exists in SU01. Perhaps one of them are capable to influencing the visibility of the tabs, now that SNC is always visible.
- Use SU01D for everything, and create your own little user administration transaction to do that which you still need SU01 for (considering that SSO and user provisioning replaces much of it's work, as per your previous questions). Roles can be assigned in PFCG.
Cheers,
Julius

Dynamic Display/Hide/Disable/Enable Portal Tabs..

We have a Portal Page Group with multiple TABS. We like to be able to display/hide (or enable/disable) tabs based on the Portal Roles assigned to the current user.
Is it possible to Hide/Display tabs dynamically based on certain conditions? What is the best way to enforce this without creating multiple page groups?
Thanks

Tabs can have access privileges assigned, so out-of-the-box tab security would work. Was there some other condition you need to address?
-John

HT1369 Sir my iphone disable i need help for enable . l pease help me

my iphone is disable i need help for enable.

-> iOS: Forgotten passcode or device disabled after entering wrong passcode

How to enable reresizing tabs after closing tab?

How to enable reresizing tabs (like in older version than 5) after closing tab without mouseout?

You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Hey. i just restored my iphone and now it says your apple id is disabled then i forgot everything about my email and security questions please help me enable my apple id

hey. i just restored my iphone and now it says your apple id is disabled then i forgot everything about my email and security questions please help me enable my apple id
i dont think there is another way to unlock my apple but i need to

Hello there, Th3FoX98.
The following Knowledge Base article is a great resource for what to do if you've forgotten the answers to your Apple ID security questions:
If you forgot the answers to your Apple ID security questions
http://support.apple.com/kb/HT6170
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi I hv bought my iPhone 5s from Dubai and using it in India. I m not able to use FaceTime. Please help to enable FaceTime in my iPhone 5s

Hi I hv bought my iPhone 5s from Dubai and using it in India. I m not able to use FaceTime. Please help to enable FaceTime in my iPhone 5s.

What is the model number of your iPhone? Settings=>General=>About, scroll
down to Model.
FaceTime is restricted in certain Middle East countries and iPhones designated
for those markets will never have FaceTime, even when no longer in the restricted
areas.

Please help to enable? it got disabled because of wrong entry of password

please help to enable? it got disabled because of wrong entry of password

Hello,
I advise you to check this useful link : http://support.apple.com/kb/ht1212

What Help Viewer Component Enables Index tab?

A customer of ours has a problem with any .chm help file not displaying their index contents properly (showing up as blank). In our app, we have a Help | Help Index menu item that opens up our .chm's index tab. This ends up crashing the entire application.
Similarly, accessing the help file directly in Windows Explorer (outside of our application) works fine until he goes to the chm's Index tab in which case the HelpViewer crashes.
Another similar symptom: sometimes the Index tab's contents will be blank and then a crash occurs when he attempts to close the help viewer.
The index tab problems are not unique to our help files however. So I think there's likely some Windows component missing on his system that makes any .chm file with an index tab display a blank tab or causes crashes.
Error Messages consistently mention a problem with:
ModName: itircl.dll
(Sorry rest of the message is in Swedish)
Has anyone heard of this problem and know how to fix it? Should customer just re-register the .dll? Or is something else needed?

Hi there
There are several DLLs that sometimes become corrupt or get clobbered. I think you would be well advised to download MJs Diags from the link below:
http://helpware.net
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Help with enabling TPM in Task Sequence for Dell Laptops

Hi there,
I would appreciate some advice on creating a task sequence for Win8.1 with TPM enabling for Dell laptops; I have BitLocker set up manually with a Group policy, but want to have TPM enabled in the task sequence. I have read older posts on sites such as windows
noob, but can't see how to reference the CCTK and get TPM going for win8.1 in a SCCM2012 environment.
Obviously I haven't created this before so any help would be appreciated; I have noticed when I try to import my CCTK configurations into SCCM as it isn't a zip file I cannot do it.

Luckily Dell wrote a whitepaper about that subject, see:
http://en.community.dell.com/techcenter/extras/m/white_papers/20209083
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Help me Enabling SNC tab

Similar Messages

Maybe you are looking for