Help me export DV VIDEO Encoder Type 2 with cs6

Dear !
I use AP CS6 edit my film. When i export my video 1minutes and 10 minutes then :
-export 1minutes
-Export 10minutes
Media Encoder CS6
After endoder done i use Ulead Videostudio 9 check file info
i see it different.
i want export my video have duration over 10minutes with compression DV Video Encoder-Type 2
Please help me.
Thank !

I do believe PP will export to different types depending on the length of the export. I'm not aware of any way to change that type in PP itself. But there are third party tools which can do the job.

Similar Messages

Help! I need to export a video in 2k with 1.89 aspect ratio

Hello there! I need help! I need to export a video in 2k with 1.89 aspect ratio. I dont know what else to try. If someone could hep me I will really apreciate it. thanks!

What are you going to do with a 2k export?
What was your Edit Sequence Setting?

DV Video Encoder -- Type 2 and AVI OpenDML Uncompressed

Dear all,
I've been converting a number of edited 1280 x 720 videos to DV PAL Standard with Adobe Premiere Elements 9. However, when I was importing the output file to another DVD editor, some of the files have been rejected due to the follwing reasons hightlighted in red. Do you know how o fix it?
100 - DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
101 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
102 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
104 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
105 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
106 - DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
100P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
101P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
102P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
104P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
105P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
106P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
Thanks in advance.
Best regards,
Anson

Unfortunately although you can apply all kinds of styles in the Forum editor, it throws most of them away when you post. So, as you will have seen, you cannot display in colour. If I recall correctly the only universal accepted features are normal, bold and italic. Depending on your browser smileys' may or may not work.
What other editor gave you the errors?
Are all those lines you've posted error messages?
Can you load the offending clips into GSpot v2.60 and post the screenshots here.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Flash Video Encoder conflict with Safari for Windows

I installed Safari for Windows (AMD/Windows XP) without the
options (no Bonjour) and found that it disabled Adobe Flash Video
Encoder (tries to reinstall, can't find msi, can't reinstall from
disk, 1 keeps asking for disk 1). Uninstalled Quicktime, didn't
help. Uninstalled Safari, rebooted, still can't get Flash Encoder
working.

timtro;
Many (myself included)won't be installing safari/win until
the final
release, and I suspect Adobe won't test much until then
either, so it's
probably best to report this to apple as a possible bug with
their
beta. -Tom Unger

Flash 8 Video Encoder Error with Sony Handycam movie

Hi,
I'm using Flash 8 Video Encoder to convert movies to .fla
format to use them on websites. Now trying to do this with movies
shot with my new Sony Handycam, Flash Video Encoder gives an error
and doesn't convert the movie.
Any idea what to do?
Thanks, have a nice day.

Ferrohead wrote:
> Thanks for the reply.
> I haven't tried this option yet, I've opened the Picture
Motion Browser but I don't see how to convert it to mpeg2.
>
> Can you tell me how to do this?
>
> Thanks again.
I have this option from right click menu - Convert to Mpeg 2
and save.
By the way, does your CD comes with Sony Vega program?
This one is able to open Sony's raw file format and export to
very nice
quality mpeg that works superb in flash. I did lots of video
using Vega,
to adjust the sharpness, color contrasts and all, before
start exporting and
down sizing...
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Please help me export my video

I've used Final Cut for a few years, I've never had this problem, But when I go to export my video, only 3 minutes out of 5 minutes gets exported!! I tried setting in and out points at the beginning and the end, I've tried taking the in and out points out. The Videos exports fine when I export it as a PAL, instead of NTSC,
but i need NTSC. I'm guessing I just have one of my settings wrong, but i'd appreciate any help I can get. Thanks

Hi:
Export your PAL movie as Quicktime Movie, same settings (PAL) self contained. Then use that as source in Compressor and use the Advanced Standard Conversion presets, the DV NTSC one (I'm guessing your footage is DV!) and re-encode it.
If you want to get the best quality, check this thread:
http://discussions.apple.com/thread.jspa?threadID=1015451&tstart=15
It refers to NTSC to PAL conversion, but you can use the advices in the opposite direction too.
Hope that helps !
Alberto

Need help ASAP exporting 1280x720 video as 720x480 letterboxed w/ timecode

Hello. I'm using FCP 6.0.4. I have a video that is 1280 x 720, 24FPS, Sorenson Video 3 compression. I need to add an academy leader to this (the leader video file is 29.97FPS, Apple Motion JPEG A, 720 x 486), add a timecode filter using timecode reader (I know how to do this part), and get the finished video exported as a 720x480, 29.97FPS, DV/DVCPRO - NTSC video with the correct aspect ratio for the original video file. Every time I have tried this so far I get a 720x480 with the timecode but the picture looks stretched horizontally.
Please help with this ASAP as I am a student working on my final project and I've already lost several days trying to figure this out.
THANK YOU!

Create a standard definition project (In easy setup choose DV or DVCPRO Anamorphic) > copy and paste the HD timeline on the newly created timeline and export.
If in QT player you see a stretched image, don't worry, that is normal when QT plays non-square pixels (anamorphic).
Hit command J (QT Show movie properties) > Click on presentation tab > Conform aperture > Clean or Production.
If this video is not for the web or generally for computers do not save the change as your movie will look absolutely fine when in DVDstudio you'll choose a 16:9 display mode.
G.

Help! Export iTunes Playlist to Folder with Play Order

Hello all,
I run a community internet radio station, and to upload songs to the server, a .zip file has to be uploaded. However, when a playlist, or a bunch of songs in a set is carried over, Finder reorganizes the files alphabetically, and it doesn't preserve song and play order which is essential. So, I did a few searches and there seemed to be a solution at macosxtips.com, this is the link: http://www.macosxhints.com/article.php?story=20080424194133862.
Basically, what it said was: start an automator workflow, and get selected itunes items, then copy finder items, and finally, rename files (sequentially). However, when I do this, the workflow seems to process endlessly without any results. It doesn't prompt me to add the files to a folder, and seems to get stuck at step one.
When I checked the log in Automator, it said, in regards to Get Selected iTunes Items, "The action 'Get Selected iTunes Items' was not supplied with the required data."
I've tried this both on my 24" aluminum iMac and my 15" new aluminum Macbook Pro with the same results.
I'm stuck, and I need to provide my team with a solution to upload their playlists. Any suggestoins? Thanks in advance, all of us here at www.itntradio.com appreciate your help.
See screenshot below -

OK, since you are desperate and all...
An AppleScript can easily do the same thing, so give this one a try. The following script works the same as your example workflow - it copies the selected iTunes items into the specified folder, renaming them by adding a prefix (I used your workflow example for the details):
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
(* copy and rename iTunes items *)
if application "iTunes" is not running then
display alert "iTunes is not running" message "Please activate iTunes and select items."
return
end if
-- set up a few things
choose folder with prompt "Choose a folder to copy the selected iTunes items into:" default location (path to desktop)
set DestinationFolder to the result
set {PrefixNumber, TrackLocations} to {0, {}}
-- get filepaths of the selected iTunes items
tell application "iTunes" to repeat with SomeTrack in (get the selection)
try -- skip items that are not file tracks (no location)
set the end of TrackLocations to location of SomeTrack
end try
end repeat
-- copy and rename
repeat with SomeFile in TrackLocations
set PrefixNumber to text 2 thru -1 of ((1000 + PrefixNumber + 1) as text) -- prefix with leading zeros
tell application "Finder"
set NewName to PrefixNumber & "-" & (get name of SomeFile)
set the name of (duplicate SomeFile to DestinationFolder) to NewName
end tell
end repeat
tell application "Finder" to reveal DestinationFolder
</pre>

Need help in controlling a video (play/pause) with the main play bar in Cp7.

In a presentation, I'm doing an online ordering demo - my slide(s) have a video object, audio clip and may have various text and/or shapes that will transition from time to time. The problem being, if Pause is clicked in the main/TOC play bar, the presentation pauses but the video continues to play, until the end of that video. My video is an .f4v (I've also tried it as an .flv).
What can i do to allow the main play bar to control the video?

Insert as Slide video, not as Event video. Then the playbar will also control the video.

Help needed exporting from Lightroom 4 to Photoshop CS6

I'm running LR 4.4 and Photoshop CS6 on an iMAC and I'm having issues with the edit in photoshop option. Used to be able to right click and image, go to Edit In and choose Photoshop CS6 and Photoshop would open and the image would open. I could then make my changes and save them and those changes would copy back over to Lightroom. Now when I choose Edit In>Photoshop, Photoshop opens but the image never opens. It would prompt saying Open Anyway or Render using Lightroom. If I clicked Open Anyway, the image would NOT open in Photoshop. If I clicked Render using Lightroom, the image WOULD open in Photoshop. Well now I've upgraded my software and it's no longer prompting me to Render using Lightroom. Can someone help either fix the root probelm or tell me how to get my raw files to Render using Lightroom?

Same problem here on the PC side.

Hi!I have an image which is a drawing of black lines and i need to put it over a picture without loosing definition in both of them,like the drawing and the picture are one.How can i do that?can someone help me please?I do work with CS6.Thanks!

Photoshop General Discussion

Why has nobody suggested the "Blend If" solution yet?
- double-click on the layer thumbnail of the dragon line art
- Hold down <Alt> and drag the left half of the "This Layer" slider to the left, and the right slider as well, but not as much for a nicer blending.
Done. The only trouble is that you cannot add (for example) a color overlay effect to recolour the lines directly because this layer is not considered truly transparent by Photoshop (in Photoline this is not an issue luckily). In Photoshop's case you will have to merge it to a new layer, and only then does Photoshop treat the transparent pixels as "real" transparent ones. Some tips to do that can be found here: Create A Composite Layer | Planet Photoshop
Alternatively, convert the layer to a smart object, and you can apply layer effects and the like without issues. I would choose the latter option, since it is non-destructive.
This method, however, does not take the pre-multiplied edge pixels into account (which are multiplied with white), and thus you lose those pixels. This may be an undesired side effect, especially for more delicate art work. A better approach is to use an "unmultiply" effect.
In Photoline a non-destructive adjustment layer will allow us to do exactly this with any background colour, and with additional controls as well. Unfortunately, such a filter is unavailable in Photoshop. Luckily enough an action for Photoshop is available: http://www.ayatoweb.com/download/down04.html
- download the action (zip file) and load up the actions in Photoshop (I have no idea if this action still works in CC and above - I own a license of CS6 only).
- since this will unmultiply BLACK, you must first invert the artwork with <CTRL> <i>.
- run the action "unmultiply English".
- The black background is removed, and you now invert the artwork back to its original black.
Done! Notice how all of the original edge pixels remained unaffected. Those are now truly semi-transparent, and blend nicely with the background layer(s). A bit of a shame this is a destructive workflow, but the result is great.

Help on export sybase iq tables with data and import in another database ?

Help on export Sybase iq 16 tables with data and import into another database ?

Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb.

Flex live Video Encoding

Hai.
I am developing a video chat application in flex. Can anbody
help me in the video encoding part?
I need the video to be encoded using ON2VP6 or H264 to get a
better quality. How it can be done live using flex?
Thanks,
VivekVijayan

The problem is, you need a clientside technique to encode the video-chat-stream with a useable codec, cause the client/user have to upload this video(chat)-stream to the server, mostly with a small user bandwidth.
Actually flash supports only this standard codec for encoding the user video input, wich requires a high bandwith and represents still a real bad quality.
Thats a bad fact for adobe, cause this should be natural for such an "media software/system".
Anyway, someone has a solution for encoding the clients webcam input with a common codec before streaming to the media-server?

Help with exporting Minecraft video

Hello. My name is Reynir Aron. I make Minecraft videos and I recently switched from Final Cut Pro 7 to Premiere Pro CS6 and I love using Premiere.
However there is one little problem, when I export the video (even if I do it through Media Encoder) the video looks very smoothed out (for example the text looks really crappy and isn't pixellated).
Can anybody help me? The video is not being scaled up, the source video, my sequence and the export settings are all 1280x720.
By the way, is there any plugin or anything that lets me export using QuickTime Pro 7?
Here is a screenshot of the output I get:
This also happens if I check "Use Maximum Render Quality".
This is what I see in Premiere's Program window:
I have an iMac8,1 (Early 2008) with a 2,8GHz Intel Core 2 Duo, 4GB 800 MHz DDR2 SDRAM, an ATI Radeon HD 2600 Pro 256 MB and I'm running OS X Mountain Lion 10.8.2.

I think my daughter is using FRAPS, but of course not transcoding, just putting that right into Premiere. If your captured file is 30fps, what is the transcoded ProRes file? I don't know if ProRes supports non-video settings, so maybe that is converted to 29.97? But then the edit sequence is 30fps, and I do see an issue - FIELDS is set to LOWER, but should be PROGRESSIVE. That could be causing the jaggies issue on your output.
How did you create the editing Sequence? Try creating a NEW SEQUENCE with the same settings, except make it Progressive, then copy/paste contents of interlaced sequence into the progressive sequence and then Export again, see if that helps. Or just do a short sample to check, to save time.
Thanks
Jeff

I make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
I know this is not the best fix, but it might work.
You can duplicate an edit in the main screen, then delete the last bits and export,
do the same for the other half.
Then import the two bits (or more if you need) in a new edit.
Out of curiosity, can you post what format the video is in?
Copy a video straight from the camera to your computer.
Open it in Quicktime player, and with out playing type Apple + i
or Control + i for PCs
It should tell you lots of info about the video, and might help us to see what is wrong.
This is what it looks like:

Help me export DV VIDEO Encoder Type 2 with cs6

Similar Messages

Maybe you are looking for