Help me find a cpu cooler please.

Hi everyone,
Im having some difficulty finding a decent cpu cooler for my box,
atm im using the boxed cooler from AMD modded with a 80mm papst fan,
it runs pretty quite, but the temps aren't that good.
Ive tried adding some more fans in the kabinnet, but then it makes more noise, which is unpractical.
There are so many brands and types of cpu coolers, and since im really not following with the hardware developent anymore
im really at lost with this, so i hope some of you gurus can help me out.
It should be pretty simple
sys specs:
Motherboard: MSI K8N Neo2 Platinium
cpu: A64 3500+
Thanks a lot

I guess its a winchester 939 pin ( 2.2Gz with  512kb cache )
Code: [Select]
~ sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore:     +1.41 V  (min =  +1.40 V, max =  +1.55 V)       ALARM 
+12V:     +12.71 V  (min = +10.82 V, max = +13.19 V)             
+3.3V:     +3.20 V  (min =  +3.14 V, max =  +3.47 V)             
+5V:       +5.04 V  (min =  +4.75 V, max =  +5.25 V)             
-12V:     -14.91 V  (min = -10.80 V, max = -13.18 V)             
V5SB:      +5.11 V  (min =  +4.76 V, max =  +5.24 V)             
VBat:      +2.69 V  (min =  +2.40 V, max =  +3.60 V)             
fan1:        0 RPM  (min = 675000 RPM, div = 2)                     
CPU Fan:     0 RPM  (min = 21093 RPM, div = 2)                     
fan3:        0 RPM  (min = 112500 RPM, div = 2)                     
M/B Temp:    +29°C  (high =    +0°C, hyst =    +0°C)   sensor = thermistor           
CPU Temp:  +55.0°C  (high =   +80°C, hyst =   +75°C)   sensor = diode           
temp3:     +32.5°C  (high =   +80°C, hyst =   +75°C)   sensor = thermistor           
vid:      +1.475 V  (VRM Version 9.0)
alarms:   
beep_enable:
          Sound alarm disabled

Similar Messages

  • Help me! Having CPU Cooling problems!

    Howdy
    I'm having serious problems with my P.C. I have recently upgraded my PC's processor from a celeron 2 ghz to Intel Pentium 4 3.2GHz 478Pin 1Mb Cache 800MHz FSB Processor Prescott, I Installed the processor with the standard Intel Heatsink and core centre was telling me that the CPU was running at around 59+ degrees celcius 138+ degrees farenheit at idle.
    I thought that this was a little hot at my celaron didn't push past 45 degrees c. while idling
    I thought nothing of it putting it down to faster cpu high temperature... I decided to run a game to see the difference my hard earned cash had made, the first thing that came to hand was "The Sims 2" which ran perfectly on my celaron if not a little boggy at times.
    The game booted quicker and i got into a game to see how much smoother it was running and the game hung.
    I thought that maybe it was a because it had a new processor and it needed a reboot, which i did and i checked out the game again and it did exactly the same thing.
    I thought that maybe the cpu was getting a bit hot so i turned the machine off and went out the next day to purchase another couple of coolingfans to create more convection in the case.
    I fitted the fans dragging air from the front and the side and blowing out of the back, this had an effect on the temperature of the cpu but not by much, It was now running at 52 to 55 degrees at ldle (at the Bios)
    I decided that this temperature at idle was too high and the fact that fact that it was crashing games (That my girlfriend likes to play) I thought that I would take the leap to liquid cooling so I purchased the Coolermaster Aquagate liquid cooling system I installed the system and fired my system up it was still reading at 52 degrees at the bios.
    When the machine got to windows the temperature slowly increased and when I tried to run the same game it crashed ( due to what i found later was the processor throttling to prevent damage)  
    One thing that i found strange was the temperature on the gauge of the AQUAGATE which has a hardwire temperature sensor that sits on top of the di of the processor and that was reading around 27 degrees at the bios.
    I thought that it may have been a faulty processor so i sent the processor back and recieved a replacement which had the same problem although alot worse ( 65-70 degrees at the bios)
    I have sent that one back and I'm awaiting the replacement.
    I would like to know if there is actually a problem with the motherboard itself or just a problem with the temperature sensor settings in the bios.
    or if there is a bios update that can prevent my processor from throttling and crashing everything.
    Please help as I really like this Motherboard and I can't afford to buy a new one.
    Matt

    Howdy all!
    Got my chip back from novatech, I updated the Bios to V2.5, ditched Corecentre and replaced it with speed fan (pretty cool!).
    Put the chip in and everything seems to be running okay...ish
    The only thing that's bothering me a little is that its still posting temperatures of around 48 degrees C, at idle.
    which is okay but I'm using a watercooling system so I thought that it would be a lot lower than that I am aware that Prescotts do run hot but i didn't think that it would be this hot.
    Maybe I'm being dumb and this is a good temperarture but I was hoping that It may be a bit lower so I could maybe overclock it.
    Could anyone suggest anything I could do to bring the temperature down a tad?
    Many Thanks to Danny and Dcasole that pointed me in the right direction with the BIOS, my girlfriend can now play The Sims 2 and will stop nagging me, so thank you from the bottom of my heart.

  • Help me find the correct document please!

    (This is a repost - not sure if I posted it in the correct forum before)
    I'm just starting out with Java, on the J2ME platform.
    I've been reading about threads, such as this:
    http://developers.sun.com/techtopics/mobility/midp/articles/threading2/
    where it says:
    The Java runtime associates each live thread with an instance of java.lang.Thread.
    But on my API docs, which I downloaded (can't find them online) the Thread class isn't a HTML link, suggesting it's not part of J2ME. But all the example source code I've seen has it supporting "start", "run" etc.
    The docs I have were downloaded from the Sun site, and are in the same format as the regular J2SE 1.5 does (html files with 3 panes).
    Am i missing something? Where (possibly on a Sun webpage) do I get documentation about Runnable, Thread etc, related to the MIDP2.0 release.

    I'm new to this, but I also had trouble for a while in finding and installing the right drivers. Eventually I got it to work with the link below. Follow the steps and select everything it suggests (I did and it worked for me). You might want to try it and see if it works for you too. Good Luck. http://www.creative.com/language.asp...wnloads/su.asp

  • Help me find an App! Please

    Hi. I am looking for a "calendar" type iPhone app that will function as both an attendance schedule as well as a payment received/due.
    I run a private teaching studio and want to eliminate multiple calendars for my records. I looked through several app categories, until my eyes hurt! Most app desrips were too vague.
    Any other there that you know of? Thanks.
    Scott

    The carrier is the only true way to block a number, if they are not offering it, then unfortunately, your out of luck. The apps that claim to block numbers actually do not.

  • Need help to find photo's on my backup drive,since installing Mountain Lion cannot find where they are stored.The backups after ML install are greyed out except in Applications, MyFiles and Devices really welcome a hand with this please.

    I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck.  I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.

    -Reece,
    We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
    So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
    The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

  • H8-1214 cpu cooler upgrade

    I'm trying to upgrade the cpu from fx-6100 to fx-8150 but i'm having a heck of a time finding a cpu cooler that will fit the angelica motherboard. what most people don't understand is that the angelica motherboard utilizes am3+ socket with intel cpu cooler mount. does anyone know or recommend a cpu cooler that will handle 125W cpu, fit the small space, not cause issues with mounting? I can already that tower coolers will not fit or work, due to most using push pins instead of screws because the cpu mount is screw in and most towers are tall.

    Hi,
    If you search the forum you should find a post with a similar desire.  It's interesting to note that HP Partsurfer only shows one heat sink and it's rated for 95 watts.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Recomendations for cpu cooler?

    I'm looking for some recomendations for a cpu heatsink/fan for a socket 775 processor. I am currently using a Thermaltake Jungle 512 and it just isn't cutting it. My idle temperature is at 50 and the fan is pretty loud. Already the temperature went above 60, which I do not want. So do you have any recomendations? Thanks for your help!

    Not only CPU cooler but also your casing fans. Is it enough cooler fans. It's better to hav at least 2 cooler fans. One suck in at front and another blow out at the back. Room temperature is also important. Now days computer with higher running processor must be provide in good environtment/aircon room. Operating computer on aircon or non aircon room, it's a big difference. Good Luck.
    Best regards,
    Beni

  • Aaron: Please help me find a Voodoo Rage or Omen-R

    Original thread: http://h20435.www2.hp.com/t5/Desktops/Please-help-me-find-a-Voodoo-Rage-or-Omen-R/m-p/56196#M9193
    Hey guys!
    I've been looking for a Voodoo Rage and Omen-R for the longest time. Does anybody have one for sale or know anyone that does? I'll pay a nice price for one in good condition. Please help me out if have have any information. This is what I'm looking for:
    VOODOO RAGE
    *complete system or bare case is ok
    *matte black or painted exterior  is ok
    *red interior
    *newer revision with x2 rear 80mm fans and glowing voodoo mask ontop of case
    VOODOO OMEN-R
    *complete system or bare case is ok
    *matte black or painted exterior  is ok
    *newer revision with standard left side ATX layout and slightly protruding front bezel

    Keep checking auction sites, they come up every once in a while.
    Blackbird 002 – Core i7-920 ~ eVGA X58 SLI ~ 6GB Corsair Dominator DDR3 1600 ~ OCZ Vertex 60 GB SSD ~ WD Black 1TB ~ 3 x SLI BFG gtx260s max core 55 ~ Custon LC (cpu)
    Blackbird 002 – Core i7-920 ~ eVGA X58 SLI ~ 12GB Corsair Dominator DDR3 1600 ~ 2 x WD Velociraptor 300GB (Raid 0) ~ WD Velociraptor 300GB ~ WD Velociraptor 150GB ~ eVGA e-GeForce 9800 GT AKIMBO ~ Asetek LCLC (cpu)
    Omen – Intel Core 2 Extreme X6800 ~ eVGA nForce 750i SLI FTW ~ 4GB Corsair Dominator DDR2 1066 ~ WD Raptor 150GB ~ WD Black 1TB ~ eVGA GeForce 8800 GTX ~ LG Multi read write

  • Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platforlease help error message on boot up// panic cpu 0 calller 0x563ebd unable to find driver for this platform

    please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

    Hello jayparks41
    There are a few things to try and the article below can walk you through them before trying to hunt down a Snow Leopard install disk. I will say that it may come down to reinstall Snow Leopard but also before any troubleshooting, make sure to have a safe copy of your data.
    OS X: About kernel panics
    http://support.apple.com/kb/TS3742
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.

  • Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platform

    please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
    Safe Mode
    If you can't do that either, then you will probably need to reinstall 10.6.

  • My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

    My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

    That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
    Thank you for your replys

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • HT201472 can you guys please help me find my ipod because i lost it a week ago and i cant find it i've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway here my

    can you guys please help me find my iPod because i lost it a week ago and i cant find it I've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway  or somehow because my iPod i love it i would always take pictures with my friends and i have all my memories in it so i don't know where it is for all i know it could be on the street getting ready to get ran over because the last time i ever saw it was on last Sunday when i went to my cousins house when we were leaving i grabbed something to eat then i sat at the table then i left but i swear i had it in my pocket when i left but i didn't so i asked my cousin if he could look for it and he said sure so he started looking for it but didn't find anything and so i lost it sense and i asked my dad if i could get a new one and he said in a couple of years but i want that iPod back it has all my memories in it it's really special to me and i'm really desperate so please help me someway somehow anyway just help me please i don't know what else to do but beg for someone to help me because I've tried looking for it in my car in my room in my coats and nothing i tried looking for it on the website find my iPhone/iPod/iPad and it didn't help so please help me i beg of you if you are reading this and don't care you really are heartless because a little 12 year old girl can't find the most precious thing she got from her father 1 year ago and if you are reading this and you have a heart please help me find it if you do want to help me find it****
    <Personal Information Edited by Host>

    You are not addressing Apple here. We are all just users like yourself
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HT1933 I make a purhase on March 6 at 11:33 Order number MHOXX3TK9J for $1.99 and my credit card was charged $20.00 can you please help me find out why this happened

    I made a purchase on itunes on March 6 at 11:33 order umber MHOXX3TK9J for 1.99 and my credit card was charged $20.00 please help me find out why this happened.

    Contact iTunes support at the link below.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • PLEASE HELP ME FIND A GOOD CAR PLUG FOR MY iPHONE

    Alright guys, I have been through 3 different plugs to connect my iphone to my car to play music, and I am a bit ticked. So i figured I would ask the Apple Discussion Boards so you guys can tell me the best audio/charger combo for my iPhone. Here is what happened with each of my previous plugs...
    The first one was just a regular ordinary headphone plug that plugged from my iphones headphone slot to my car's auxiliary slot. It worked for a while but then the audio only started coming out through the right side of my car speakers occasionally, and I know for sure it is not my car that made the problem because my radio and CD's play fine through both speakers.
    The second one is a "Kensington LiquidAUX Auxiliary Car Kit with Remote for iPod and iPhone". First off the remote that it came with didn't work properly. But here comes the worse part that is so annoying. This problem got progressively worse by the way.... a lot of times the plug would think that it unplugged itself for some strange reason and the music would stop as well as the charging, but then 1 millisecond later it would think it was plugged back in, and although it starts charging again, the music doesn't play again until I press play. Don't tell me to make sure it is plugged in securely because trust me my friends, I have tried everything possible to get this to work. Keep in mind I am driving...so it is a very bad idea to be messing with my phone to press the play again. And lately it has been getting so bad that I actually have to unplug the plug from my iphone and then plug it back in and press play, which is incredibly annoying. This happens about once a minute OR MORE now a days. Also, it makes a really annoying "whirrling" sound whenever I am using it. By the way, I even turned Airplane mode on, and the exact same problems still happened. So a summary of this: this audio/charger combo is a failure.
    My 3rd plug I decided to try a normal headphone to aux plug again like the first except this time by a better brand, Griffin. But oh wait, the exact same problem happened that the first one had.
    Ok guys, so what I really want for you to do for me is PLEASE HELP ME FIND A GOOD CAR PLUG FOR MY iPHONE.
    Here is what I am looking for in my plug:
    Plays music through my car's speakers AND charges at the same time;
    I would prefer if it wasn't an FM transmitter because those tend to lose audio quality compared to direct plugins, unless you know of an amazing FM transmitter where you don't lose audio quality;
    And finally, I want my plug to ACTUALLY WORK WITHOUT GLITCHES
    Also, it would be nice if the plug that you refer to me, you actually own, so I know that you have tested it out before and that it works great.
    Any HELP would be very much appreciated, thank you.

    i thought about going the same route you did, but when I started looking at the prices of everything, I decided it was a better idea to just get a new stereo that can play and charge my iPhone.
    After a lot of comparing, looking and price checking, I decided to go with the Alpine IDA-X100. This is a media player only device (no cd player built in) and it has been great. It has an awesome interface and dial setup that let's you go through your music just as if it were on an iPod. It even has a small color screen that displays the album artwork for you. My car has a factory BOSE system in it and the Alpine head unit even managed to improve the sound quality. Go see you local alpine dealer (or best buy) and check it out. The supplied cable charges the phone and plays music too. Your iPhone will give you an error message when you plug it in, saying that the accessory was not designed for iPhone, but if you just click no it works great.

Maybe you are looking for

  • Move up one level in path and make new folder

    How do I get applescript to make a new folder one level up from myFolder i.e. set myFolder to ¬ (choose folder with prompt "Where are the image files for which you want to change exif data ?") as reference make new folder at myFolder with properties

  • Objects in a cube: Does it matter whether selected from ODS or infocatalogu

    Hi, Objects in a cube: Does it matter whether selected from ODS or infocatalogue? When creating a cube, you have the option to select the char and key figures directly from ODSes feeding the cube or from the infocatalogue where the objects originally

  • Display a web page in Keynote

    I have a keynote presentation that run automatically each day in my library. It would be great if a web site like Today in History could be displayed on a keynote page. I could paste it in, but that would require changing the paste each day. Is there

  • TFS Power Tool 2013 Process Editor won't launch

    I installed VSTF 2013 (Team Explorer for Visual Studio 2013) and also TFS Power Tool (12.0).  I rebooted after installing and then launched VSTF successfully and connected to my Team Project successfully.  I then go to ""Tools>Process Editor>Work Ite

  • HTML printing in Labview running Sun Solaris

    We are creating html test data files in labview and would like to print them on the Sun Solaris. Labview for Solaris can print the files but just prints the source code (doesn't format the code into nice tables, etc). You can also print the front pan