Help me format
I have a 250gb westeren digtal hard drive, exact info hhere
Western Digital
Which is located in an A-power encloure
http://www.geeks.com/details.asp?invtid=AP35-C&cat=CAS
All that is connected via firewire cord.....however that hard drive crashed, nothing major lostt, yet when i try to format the drive i get an input/output error in disk uitlity...i tried to format in disk uitlity and drivve genius, (which initilizes it, but the volume never appears...)
Customer Help
these are linka to the hard drives inquestion
the current jumper setting on the internal drive iis
something like this (::::)
. . l:
Similar Messages
-
Need help in formatting the Date - Date does not
Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PMYour syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck! -
Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help
Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius -
Please help on Format Mask...
Hi everyone,
I have few question regarding to Format Mask:
1) I know that if u key-in the invalid format
(ie: format: dd-mm-yyyy and I key-in 35/21/2001_
Oracle will display the error message at the Status bar of the
Form, can I make this error message to displayed as a popup
msg (like alert) automatically? Or I need to do a checking on
the error code in ON-ERROR trigger than SHOW_ALERT()?
2) How to make a Format Mask that will format this:
60312345678 format to (603)1234-5678
6031234567 format to (603)1234-567
I tried this format mask "("999")"999"-"999, it worked for the
first one but the second one it came out as below:
6031234567 formated to (60)3123-4567
Is there a way to overcome this?
Thank You
Regards
Wai Chong1.I ussually use on-error trigger at form level and check for
the error code and use show_alert built in accordingly.
2.Have you tried adding, if I am not mistaken, FM (fill) mode.
It will theoretically accept anything that you type. You can
look on the builder help on format mask topic. Or have you
tried adding the space after the region code. This is pure
speculation but you might want to try.
Hope it help. -
Help me format my external drive
Ok here is my problem, the drive got corrupted (my fault, the drive was getting scanned and it lost power) now i hade hopes of restoring it, but that fell through (nothing important was on it) so now i try to format the drive and i get an input and out put error, then i try to partion it, but that also fails.....so then i connected it to my windows and to access the drive i have to go through disk manager and the partion and the format fails...this also happens to another drive of mine that was corrupted form another issue......
i have giiven u every piece of inforamtion i have, please help me, also i want all information on the enclousre, and azny update drivers for it, i hope i have given enough information
Here is the EXACT drive in question.
http://www.geeks.com/details.asp?invtid=AP35-C&cat=CAS
Here is the EXACT hard drive i use.
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=932&p_created=1049408910&p_sid=N_BmnJ5i&p_lva=&p_sp=cF9zcmNoPTEm cF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBf Y3Y9JnBfc2VhcmNoX3R5cGU9c2VhcmNoX2ZubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PXdkMjUwMGxi &p_li=&ptopview=1
here is all the information on my compouter
Cingullar
4/26/05 11:33 PM
Hardware:
Hardware Overview:
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.67 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f1
Serial Number: YD5220XLRG4
Network:
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:88:bf:e8
Media Options:
Media Subtype: none
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 192.168.2.6
IPv4:
Addresses: 192.168.2.6
Configuration Method: DHCP
Interface Name: en1
Router: 192.168.2.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Default Zone: *
Interface Name: en1
Network ID: 65307
Node ID: 151
DNS:
Domain Name: Belkin
Server Addresses: 192.168.2.1
DHCP Server Responses:
Domain Name: Belkin
Domain Name Servers: 192.168.2.1
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.2.1
Server Identifier: 192.168.2.1
Subnet Mask: 255.255.255.0
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: No
HTTP Proxy Enabled: No
HTTP Proxy Port: 8999
HTTP Proxy Server: 127.0.0.1
HTTPS Proxy Enabled: No
HTTPS Proxy Port: 8999
HTTPS Proxy Server: 127.0.0.1
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:9c:3d:aa
Media Options:
Media Subtype: autoselect
Internal Modem:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:11:24:ff:fe:88:bf:e8
Media Options: Full Duplex
Media Subtype: autoselect
VPN (L2TP):
Type: PPP (L2TP)
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Software:
System Software Overview:
System Version: Mac OS X 10.4.6 (8I127)
Kernel Version: Darwin 8.6.0
Boot Volume: Steven
Computer Name: Cingullar
User Name: Steven Feldman (steven)
ATA:
ATA Bus:
MATSHITADVD-R UJ-845E:
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
ATA Bus:
FUJITSU MHT2080AH:
Capacity: 74.53 GB
Model: FUJITSU MHT2080AH
Revision: 81EC
Serial Number: NP0PT552APF0
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Steven:
Capacity: 74.41 GB
Available: 3.25 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /
Audio (Built In):
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls: Left, Right
Playthrough: Yes
PluginID: TAS
Line Level Input:
Controls: Left, Right
Playthrough: Yes
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Left, Right
PluginID: TAS
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth:
Apple Bluetooth Software Version: 1.7.3f4
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Pictures
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents/Shared
Requires Authentication: Yes
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
CingularUpdator:
Name: CingularUpdator
Address: 00-02-ee-e2-f3-ae
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: Yes
Connected: No
MotorolaPhone:
Name: MotorolaPhone
Address: 00-14-9a-79-ad-51
Type: Cellular Phone
Services: Voice Gateway, Hands-Free voice gateway, OBEX Object Push, OBEX File Transfer, Dial-up networking Gateway
Paired: Yes
Favorite: Yes
Connected: No
CingularUpdator:
Name: CingularUpdator
Address: 00-02-ee-e2-eb-ee
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: No
Connected: No
Nokia6820Greg:
Name: Nokia6820Greg
Address: 00-02-ee-e2-58-0b
Type: Cellular Phone
Services: OBEX Object Push, OBEX File Transfer, Dial-up networking, Nokia PC Suite, COM 1, Voice Gateway, Audio Gateway, Client SYNCML, SIM ACCESS
Paired: Yes
Favorite: No
Connected: No
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: Yes
Outgoing Serial Ports:
Serial Port 1:
Address: 00-02-EE-E2-EB-EE
Name: CingularUpdator-1
RFCOMM Channel: 15
Requires Authentication: No
Serial Port 2:
Address: 00-02-EE-E2-EB-EE
Name: CingularUpdator-2
RFCOMM Channel: 1
Requires Authentication: No
Serial Port 3:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 4/26/05 11:06 PM
Result: Passed
Apple Hardware Test:
Last Run: 4/10/06 3:26 PM
Version: 2.5 PB
Test Suite: Extended Test
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-845E:
Firmware Revision: DMP2
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Graphics/Displays:
ATI Mobility Radeon 9700:
Chipset Model: ATY,RV360M11
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4e50
Revision ID: 0x0000
ROM Revision: 113-xxxxx-145
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 854
Depth: 32-bit Color
Built-In: Yes
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
Memory:
SODIMM0/J25LOWER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
SODIMM1/J25UPPER:
Size: 512 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
PCI Cards:
TXN,PCIXXXX-00:
Name: cardbus
Type: cardbus
Bus: PCI
Slot: PC Card
Vendor ID: 0x104c
Device ID: 0xac56
Revision ID: 0x0000
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Dynamic Power Step: No
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3854
Remaining Capacity (mAh): 1464
Amperage (mA): 2433
Voltage (mV): 12116
Cycle Count: 158
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
Printers:
DESKJET 3820:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://HEWLETT-PACKARD/DESKJET 3820?serial=CN28J1B11118
PPD: hp deskjet 3820
PPD File Version: 1.0
PostScript Version: (3011.104) 0
DESKJET 3820:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://HEWLETT-PACKARD/DESKJET 3820?serial=CN28J1B11118
PPD: hp deskjet 3820
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5550:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5550?serial=MY37I1S1SB2L
PPD: hp deskjet 5550
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5550:
Status: Stopped
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5550?serial=MY37I1S1SB2L
PPD: hp deskjet 5550
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5600:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: Yes
URI: usb://hp/deskjet 5600?serial=MY48A4N3SS79
PPD: hp deskjet 5600
PPD File Version: 1.0
PostScript Version: (3011.104) 0
deskjet 5600:
Status: Idle
Print Server: Local
Driver Version: 2.7.1
Default: No
URI: usb://hp/deskjet 5600?serial=MY48A4N3SS79
PPD: hp deskjet 5600
PPD File Version: 1.0
PostScript Version: (3011.104) 0
hppsc131:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: smb://Home/Stevenpc/hppsc131
PPD: Generic PostScript Printer
PPD File Version: 1.0
PostScript Version: (2000.0) 1
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x5b
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x003f
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x1a
Bluetooth HCI:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Internal Keyboard/Trackpad:
Version: 0.28
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Product ID: 0x020e
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x1b
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x3b
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)
Current Wireless Network: belkin54g
Wireless Channel: 11
Firewall:
Apple Remote Desktop:
Policy: Denied
TCP Ports: 3283, 5900
iPhoto Bonjour Sharing:
Policy: Denied
TCP Ports: 8770
Remote Login - SSH:
Policy: Denied
TCP Ports: 22
diablo II:
Policy: Allowed
TCP Ports: 6112
UDP Ports: 6112
Personal File Sharing:
Policy: Denied
TCP Ports: 548, 427
Network Time:
Policy: Allowed
UDP Ports: 123
Adobe Version Cue CS2:
Policy: Allowed
TCP Ports: 3703, 427, 50800
iTunes Music Sharing:
Policy: Allowed
TCP Ports: 3689
FTP Access:
Policy: Denied
TCP Ports: 21
iChat Bonjour:
Policy: Denied
TCP Ports: 5297, 5298
Personal Web Sharing:
Policy: Denied
TCP Ports: 80, 427, 443
Remote Apple Events:
Policy: Denied
TCP Ports: 3031
d2:
Policy: Allowed
TCP Ports: 6112
UDP Ports: 6112
Windows Sharing:
Policy: Denied
TCP Ports: 139
Printer Sharing:
Policy: Denied
TCP Ports: 631, 515
Locations:
School EtherNet:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: sfh-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: sfh-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: sfh-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: sfh-px1
Auto Discovery Enabled: 0
SOCKS Proxy Enabled: 1
SOCKS Proxy Port: 8002
SOCKS Proxy Server: sfh-px1
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exceptions List: Localhost, 127.0.0.1, .*.
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: Sfh-fs1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: Sfh-fs1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: Sfh-fs1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: Sfh-fs1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: Sfh-fs1
SOCKS Proxy Enabled: 0
SOCKS Proxy Port: 8002
SOCKS Proxy Server: Sfh-fs1
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exceptions List: Localhost, 127.0.0.1, .*.
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 1
FTP Proxy Port: 8002
FTP Proxy Server: Sfh-fs1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: Sfh-fs1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: Sfh-fs1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: Sfh-fs1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: Sfh-fs1
Dads House:
Active Location: No
Services:
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 0
Auto Discovery Enabled: 0
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Ethernet:
Media Subtype: autoselect
MTU: 1500
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Location (1/4/06 4:15 PM):
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Moms Wireless:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (L2TP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
Automactic:
Active Location: Yes
Services:
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Ethernet:
Media Subtype: autoselect
MTU: 1500
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 0
HTTP Proxy Enabled: 0
HTTP Proxy Port: 8999
HTTP Proxy Server: 127.0.0.1
HTTPS Proxy Enabled: 0
HTTPS Proxy Port: 8999
HTTPS Proxy Server: 127.0.0.1
Auto Discovery Enabled: 0
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Authorization Name: Nighteaater537
Authorization Password: <002d003d 002d003d 002d003d >
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Remote Address: 772-546-3768
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 1
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 180
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 1
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (L2TP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
MacTOPc:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
VPN (PPTP):
Type: PPP
IPv4:
Configuration Method: PPP
OverridePrimary: 1
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 1
CCP Enabled: 1
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 0
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 0
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 0
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 0
LCP Echo Enabled: 1
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: 0
School:
Active Location: No
Services:
Internal Modem:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Proxy Enabled: 1
FTP Passive Mode: 0
FTP Proxy Port: 8002
FTP Proxy Server: sfh-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: sfh-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: sfh-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: sfh-px1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 1
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
PPP:
ACSP Enabled: 0
Display Terminal Window: 0
Redial Count: 1
Redial Enabled: 1
Redial Interval: 5
Use Terminal Script: 0
Dial On Demand: 0
Disconnect On Fast User Switch: 1
Disconnect On Idle: 1
Disconnect On Idle Timer: 600
Disconnect On Logout: 1
Disconnect On Sleep: 1
Idle Reminder: 0
Idle Reminder Time: 1800
IPCP Compression VJ: 1
LCP Echo Enabled: 0
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: 0
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:11:24:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 1
FTP Proxy Enabled: 1
FTP Passive Mode: 0
FTP Proxy Port: 8002
FTP Proxy Server: ic-px1
Gopher Proxy Enabled: 1
Gopher Proxy Port: 8002
Gopher Proxy Server: ic-px1
HTTP Proxy Enabled: 1
HTTP Proxy Port: 8002
HTTP Proxy Server: ic-px1
HTTPS Proxy Enabled: 1
HTTPS Proxy Port: 8002
HTTPS Proxy Server: ic-px1
Auto Discovery Enabled: 0
RTSP Proxy Enabled: 1
RTSP Proxy Port: 8002
RTSP Proxy Server: ic-px1
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:11:24:ff:fe:88:bf:e8
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
AirPort:
Type: Ethernet
BSD Device Name: en1
Hardware (MAC) Address: 00:11:24:9c:3d:aa
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
ExcludeSimpleHostnames: 0
FTP Passive Mode: 1
Auto Discovery Enabled: 0
Modems:
Modem Information:
Modem Model: Jump
Interface Type: I2S
Modulation: V.92
Hardware Version: Version 1.0
Driver: MotorolaSM56K.kext (v1.3.3)
Country: B5 (United States, Latin America)
Applications:
Acrobat Reader 5:
Version: 5.0.5
Last Modified: 10/19/05 10:31 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Acrobat Reader 5.0
Acrobat Distiller 7.0:
Version: 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Acrobat Distiller™ 7.0.7, 1984-2006 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app
Acrobat Uninstaller:
Version: Acrobat Uninstaller version 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Acrobat Uninstaller version 7.0.7, Copyright © 2005 by Adobe Systems, Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Acrobat Uninstaller.app
Adobe Acrobat 7.0 Professional:
Version: 7.0.7
Last Modified: 11/11/05 12:19 PM
Kind: PowerPC
Get Info String: Adobe® Acrobat® 7.0.7, ©1984-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Acrobat 7.0 Professional/Adobe Acrobat 7.0 Professional.app
Bridge:
Version: 1.0.0.545
Last Modified: 11/11/05 11:58 AM
Kind: PowerPC
Get Info String: 1.0.0.545 (93460), Copyright 2003-2005, Adobe
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Bridge/Bridge.app
Adobe GoLive CS2:
Version: 8.0
Last Modified: 11/11/05 12:31 PM
Kind: PowerPC
Get Info String: 8.0, Copyright © 1997-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe GoLive CS2/Adobe GoLive CS2.app
Adobe Help Center:
Version: Adobe Help Center 1.0.0.793
Last Modified: 11/11/05 11:58 AM
Kind: PowerPC
Get Info String: Adobe Help Center 1.0.0.793 (C) 2005 Adobe Systems, Inc. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Help Center.app
Illustrator:
Version: 12.0.0
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Get Info String: 12.0.0, Copyright © 1987-2005 Adobe Systems Inc. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Adobe Illustrator.app
Demonstrator:
Version: 2.0
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Get Info String: 1.0
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Demonstrator/Demonstrator.app
Analyze Documents:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
Make Calendar:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
Collect for Output:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
Contact Sheets:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
Dataset Batch PDF from Text:
Last Modified: 11/11/05 12:15 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Datasets.localized/Dataset Batch PDF from Text.app
Export Flash Animation:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
Web Gallery:
Last Modified: 11/11/05 12:15 PM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Illustrator CS2/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
Adobe InDesign CS2:
Version: 4.0.0.421
Last Modified: 11/11/05 12:07 PM
Kind: PowerPC
Get Info String: 4.0, Copyright 2000-2005 Adobe Systems Incorporated. All rights reserved.
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe InDesign CS2/Adobe InDesign CS2.app
Adobe ImageReady CS2:
Version: 9.0x196
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 9.0x196, Copyright © 1998-2005 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Adobe ImageReady CS2.app
Adobe Photoshop CS2:
Version: 9.0 (9.0x196)
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 9.0 (9.0x196), Copyright ©1990-2005 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Adobe Photoshop CS2.app
Constrain 350, Make JPG 30:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain 350, Make JPG 30.exe
Constrain to 200x200 pixels:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain to 200x200 pixels.exe
Constrain to 64X64 pixels:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Constrain to 64X64 pixels.exe
Make Button:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make Button.exe
Make GIF (128 colors):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (128 colors).exe
Make GIF (32, no dither):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (32, no dither).exe
Make GIF (64 colors):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make GIF (64 colors).exe
Make JPEG (quality 10):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 10).exe
Make JPEG (quality 30):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 30).exe
Make JPEG (quality 60):
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Make JPEG (quality 60).exe
Metal Slide Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Metal Slide Thumbnail.exe
Multi-Size Save:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Multi-Size Save.exe
Rounded Rect Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Rounded Rect Thumbnail.exe
Slide Thumbnail:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Slide Thumbnail.exe
Unsharp Mask:
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/ImageReady Droplets/Unsharp Mask.exe
Aged Photo:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Aged Photo.exe
Conditional Mode Change:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Conditional Mode Change.exe
Constrain to 300 pixels:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Constrain to 300 pixels.exe
Constrain to 64 pixels:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Constrain to 64 pixels.exe
Drop Shadow Frame:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Drop Shadow Frame.exe
Make Button:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Make Button.exe
Make Sepia Tone:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Make Sepia Tone.exe
Save As JPEG Medium:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Save As JPEG Medium.exe
Save As Photoshop PDF:
Version: 9.0
Last Modified: 3/22/05 10:25 AM
Kind: Native (Preferred) or Classic
Get Info String: 9.0x087 ©1999-2003 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Photoshop CS2/Samples/Droplets/Photoshop Droplets/Save As Photoshop PDF.exe
VersionCueCS2:
Version: 2.0
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Get Info String: 2.0, Copyright ©2001-2004 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/bin/VersionCueCS2.app
VersionCueCS2Status:
Version: 1.0.0
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/bin/VersionCueCS2Status.app
VC2Native:
Version: 2.0
Last Modified: 11/11/05 12:02 PM
Get Info String: 2.0.0, © 2003-2004 Adobe Systems Incorporated
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/plugins/com.adobe.versioncue.nativecomm_2.0.0/res/macosx/VC2Native.app
Uninstall Version Cue CS2:
Version: 0.1
Last Modified: 11/11/05 12:02 PM
Kind: PowerPC
Location: /Applications/1-EDITING STUFF/ADOBE/Adobe Version Cue CS2/Uninstall Version Cue CS2.app
DJ-1800 2.2.1:
Version: 2.2.1
Last Modified: 10/31/05 5:57 PM
Kind: PowerPC
Get Info String:Alot of information...
First observation, is that your internal hard disk has too much on it - on an
80gb internal hard disk, you want to keep 10% available for system usage,
which would be 8gb vs the 3 and change gb available shown in your
posted information above.
See if I got this right...you have an external powered enclosure with a WD
250gb ultra ata hard drive that has worked before on your PB. Snap,
crackle, pop, power goes, and the HD is corrupted. Your PowerBook,
however, still recognizes the external HD as a device, right? You tried
hooking into a Windows-based system, and couldn't access anything.
Assuming your PB recognizes it as a hard drive, have you brought up the
Apple disk utility and tried to repair the drive (select external hard drive
on left side of disk utility, then first aid tab, repair disk)? Results? -
Need help in formatting a number field with same precision for excel output
I am trying to get the same preciision for a field in RTF template when the output is in EXCEL
i.e. same number of digits after decimal. So, I would like to show 150 as 150.00 and 123.2 as 123.20 etc !! Is there a way to do it. the Built in formatting will not display 150.00 for 150 . but if i add $ symbol it will display. But i dont need $ syambol. please help.I found this on one of the forum questions.
Excel dont preserve the trailing zeros.
try opening the xcel and type 5.0000 and tab out, it wont preserve the trailing zeros after decimal.
try finding out how to disable the option in excel. if you do that, you will see what you send out from the report.
But you can try to convert the number into a text by trying to append a space at the beginning. See if that would work.
Thanks
Swarna -
Need help in formating a form dealing with negative currency
Need Help!!!
Creating forms in Adobe acrobat Pro I could format a number cell to calculate additions/subtractions of currency. If the result was negative I could get the cell to show the negative result in red text and show parentheses around them. How can I do that in LiveCycle?
If i have to use formcalc - what would i type in?In LiveCycle can be done using the Numeric Field object and some formcalc script.
Use the "Numeric Field" from the Object Library. For the Field patterns (Select the placed numeric field, On object Window Object -> Field) use "num.currency{}" to show the currency(Ex: $) and "parentheses" if its negative. Write some script to show red text/border in red .
On exit event of the Numeric Field here is the script:
if($.rawValue <0) then $.font.fill.color.value = "255,0,0" endif // This will make entire text in red color if the value is negative.
if($.rawValue <0) then $.validate.nullTest = "error" endif //This will make border of the field in red color if the value is negative.
Hope this helps. -
Help with formatting parameters in html output?
Hi --
I would like to use a style sheet to adjust the way that javadoc displays lists of parameters below each method. In the HTML output, the code around the parameter name and description looks like this:
<dd><code>filterContainers</code> - True if the containers within the database
are to be considered individually during task assignment; false if the entire database is to be assigned as a single task.
</dd>
I apologize if this is basic CSS question, but I don't understand how to change the way 'filterContainers' is formatted -- maybe make it italic or something. I was also hoping to increase the padding below each parameter name/description because they seem to squished together.
Any help is greatly appreciated.
JenAdd this to stylesheet.css to make "filterContainers" italic:
dl dd dl dd code {
font-style: italic;
}This adds space below lines inside dd
dl dd dl dd {
padding-bottom: 3px;
}(You could change it to padding-top to add the space above instead.)
The sequence "dl dd dl dd code" is the nested hierarchy of HTML tags relative to body.
Here are the CSS elements defined above: (CSS 2.0)
http://www.w3.org/TR/2005/WD-CSS21-20050613/propidx.html -
I need help in formating in Pages
I need formating help in Pages: I need two columns for text, but other text not in the columns. How do I do both?
Hi Mandy,
I'm not sure if I've understood what you want to do, but here's an example, based on what you've said. These instructions apply to a word processing document.
The Columns control button toward the right end of the format bar is used to set the number of columns. It's the dark one (indicating it's been selected) just above the top left corner of its menu in the image:
The 'other' text (I've called it 'extra text' in the image) can be placed in a text box. Click the T in the toolbar to insert a text box, resize to fit your 'other' text, and position as desired.
One recommendation I'd make to everyone learning to use Pages is to download and read through the first few chapters of the Pages '09 User Guide. Then check in the other chapters when you want to learn how to use specific features of Pags.
You'l find a download link in the Help menu in Pages.
Regards,
Barry -
Need help with formating in a dashboard prompt
Hi
This should be an easy one. I'm creating some dashboard prompts and been looking on the Sample OBIEE and some prompts there. Well, what I would like to do is a prompt so simple as:
Prompt Label:
- alt1
- alt2
- alt3
- and so on ...
Have you seen what I've done? I want the Label of the prompt to be bold but the data inside, the alternatives should be normal.
What I do is that go to the Dashboard prompt, create it and so on and on the lower part of the Dashboard prompt edit pane "Display" I click on the pencil ... "Edit" ... go to "Format" and in there I choose "Style: Bold" ... the thing is that both Label and Alternatives turn Bold for me ...
What am I doing wrong?Hi,
If you are using 11g then keep the prompt in a section and you can add section title and you can format it accordingly. But keep the name in the label as a BLANK.
And if you are using 10g then by default the name in the label for the prompts becomes BOLD but the values would be normal.
Award points if found useful/helpful to you.
Regards
MuRam -
Need help with formating numbers
public void returnDollars()
double dollar;
dollar=amountr-amount;
NumberFormat fmt = NumberFormat.getNumberInstance();
System.out.println(fmt.fomat(dollar));
there is my code.....now lets say
amountr = 10
amount 8.5
now when i print my dollar amount i want it to show up as 1 not 1.5 or 2. So in other words format it with no decimals and not round up at the same time.
Help would be appriciated...thankswell...after 8 hours of trying to get it working i did it.....here it is ...........I'm sure there are many ways to make it smaller.
import java.text.*;
import java.io.*;
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.IOException;
public class Cashier
double amount;
double amountr;
double dollar;
double amountleft;
double quaters;
double test;
double dimes;
double pennies;
public void getAmount()throws IOException
BufferedReader console = new BufferedReader(new InputStreamReader(System.in));
System.out.println("Please enter amount due:");
String input = console.readLine();
amount = Double.parseDouble(input);
System.out.println("Amount due = " + amount);
public void recieve()throws IOException
BufferedReader console = new BufferedReader(new InputStreamReader(System.in));
System.out.println("Please enter amount recieved :");
String input = console.readLine();
amountr = Double.parseDouble(input);
System.out.println("Amount recieved = " + amountr);
public void returnDollars()throws IOException
double check = amountr-amount;
dollar=amountr-amount;
DecimalFormat fmt = new DecimalFormat("##");
String s = fmt.format((double)(long)dollar);
double d = Double.valueOf(s).doubleValue();
amountleft=check-d;
System.out.println("Dollars to return " + s);
public void returnQuaters()
quaters= amountleft/.25;
double check = quaters;
DecimalFormat fmt = new DecimalFormat("##");
String s = fmt.format((double)(long)quaters);
double d = Double.valueOf(s).doubleValue();
fmt.setMaximumFractionDigits(2);
String dol = fmt.format(amountleft);
//System.out.println(dol);
double e =Double.valueOf(dol).doubleValue();
e= e-2*(.25);
amountleft=e;
System.out.println("Quaters to return: " + s);
public void returnDimes()
dimes= amountleft/.1;
double check = dimes;
DecimalFormat fmt = new DecimalFormat("##");
String s = fmt.format((double)(long)dimes);
System.out.println("Dimes to return: " + s);
double d = Double.valueOf(s).doubleValue();
fmt.setMaximumFractionDigits(2);
String dol = fmt.format(amountleft);
double e =Double.valueOf(dol).doubleValue();
e= e-1*(.1);
fmt.setMaximumFractionDigits(2);
String dola = fmt.format(e);
double t =Double.valueOf(dola).doubleValue();
amountleft=t;
public void returnNickles()
double nickles = amountleft/.05;
double check = nickles;
DecimalFormat fmt = new DecimalFormat("##");
String s = fmt.format((double)(long)nickles);
System.out.println("Niclkles to return: " + s);
double d = Double.valueOf(s).doubleValue();
fmt.setMaximumFractionDigits(2);
String dol = fmt.format(amountleft);
double e =Double.valueOf(dol).doubleValue();
e= e-1*(.05);
fmt.setMaximumFractionDigits(2);
String dola = fmt.format(e);
double t =Double.valueOf(dola).doubleValue();
amountleft=t;
public void returnPennies()
double pennies = amountleft/.01;
DecimalFormat fmt = new DecimalFormat("##");
String s = fmt.format((double)(long)pennies);
System.out.println("Pennies to return: " + s);
public static void main(String[] a) throws IOException
Cashier cash = new Cashier();
cash.getAmount();
cash.recieve();
cash.returnDollars();
cash.returnQuaters();
cash.returnDimes();
cash.returnNickles();
cash.returnPennies(); -
Help with formatting fields in PDF...
Hi -
I´m working on a form that should be filled in from the internet...
The design I did i InDesign - and the formfields I did i Acrobat Pro -
and finally I´m finetuning everything in LiveCycle...
I've runned into two problems...
I need the date field to correct itself -
if the user choice to use the wrong format...
for example -
we want to have YYYY-MM-DD
and if the user writes DD MM YY -
it should be accepted and corrected....
is this possible - maybe with JAVA-script?
Also - In Sweden anyway we always write the Social Security number in this way
YYMMDD-NNNN ( N = Numbers between 0-9 )
How can I get the field to recognize and to crave - "demand" this format...
I´ll hope my Swinglish can be understandable?
IdéSpiranI suggest that you make use of the Validation patterns for this. On the Object palette there is a Value tab and on that tab is a button for Validation Pattern. You can create a pattern in 4 areas - Display - what the user sees on teh screen, Edit - what the user enters in the field, Validation - what the value entered will be validated against and Data - what is stored in the data file. You will be interested in the Display pattern. Depending on the type of field you will see different data patterns ( i.e. Date fields show date patterns and TextFields have phone numbers, zip codes etc..). You can also create a custom pattern. Have a look in the docs about patterns and you will see what each of the chars represents and how to create one. For your SSN you will probably need javascript because of the combination of Date and number formats.
Hope that helps
Paul -
I need help to format my laptop
I am Brazilian and do not speak well in inbles, please forgive me first of all. I want to ask for help at all, I'm having trouble formatting my Toshiba laptop I bought with windos 8, I want to downgrade to windows 7. Cant work the DVD system.
photo:
Solved!
Go to Solution.Once you change the bios your hard drive will show up to install windows 7, sometimes the bios will need to be updated before the CSM option will appear.
INSTRUCTIONS:
First - Burn recovery media before you make any changes! -you may want or need to go back to windows 8 later-
Second -
Important Bios changes when changing from Windows 8 to Windows 7:
Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
Select advanced, then system configuration, then boot mode
UEFI and CSM or legacy (UEFI for Windows 8 and CSM or legacy for windows 7)
For windows 7 change to CSM or Legacy mode.
Third - Also in bios setup utility select - Security, then Secure Boot, then you have to disable secure boot for windows 7.
You will need to delete all partitions before installing windows 7 this is done forth step.
Forth - Insert your windows 7 disc and select custom install, your partitions should show up - click on each one and below you will see advanced drive options, click that and you will have options to format - format each one, then delete each one. You will be left with one raw partition, select to install and windows will do the rest while installing the operating system.
Fifth - install drivers
Installation order is important:
Install chipset driver then video driver before other drivers. Then install Toshiba Value added package before other applications
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200007943
These windows 7 64 bit drivers may work for Satelite C55-A5105 - http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU&selCategory=2&selFamily=2&selS...
Post your results!
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!**** -
Seek help to format spool file from SQL*PLUS
I am running a Unix shell script to call a Oracle 11g SQL script from a Oracle database. In this SQL script, I need to connect to many different remote databases to select data, then sool these records as one big text file to a directory. Then email the file to related Group users. In the spool file, there is a line on the top of each page like this:
DUMMY
DB_NAME
I know this is caused by connect to remote database in SQL*PLUS. My connection string is like this:
Conn system/password@Oracle_SID
How can I remove these lines or how to skip these lines into spool file? Please advise. Thanks in advnce. Wish all of you Happy New Year!!!Hi,
It sounds like you have some kind of formatting (such as SQL*Plus TTITLE) producing the output you don't want. If that's the case, temporarily stopping the spooling might not help you. Find out what is causing the output that you don't want. You say that you know it is caused by the CONNECT statements, but it must be more than that. I've written scripts with CONNECT statements that don't have anything like what you reported at the top of each page; in fact, they don't even have pages: the output is one continuous stream. Find out what's putting the unwanted output there, and that will be a big clue as to how you can stop it.
You say that you know the unwanted titles are there because of the CONNECT statements. If so, use database links instead of CONNECT. You don't have to use dbms_scheduler or utl_file; just eliminate the CONNECT statements. (I'm not saying that there's anything wrong with dbms_scheduler or utl_file; you should definitely investigate those tools. I'm just saying that using database links is independent of them.)
What would happen if you did all your connecting to different databases at the OS level? Can you write a shell script that connects to each database in turn, and runs a SQL*Plus script in each one. Each SQL*Plus script would have a SPOOL or SPOOL ... APPEND command, or maybe you could build the SPOOL into a LOGIN.SQL script. -
Noob help to format date to insert into mysql
Sorry, if this question has been asked before, I did di a search but could not find an answer that I could understand. I am pretty new to DW and my coding skills are not good so please go easy on me.
I have a simple form to insert records to a mysql database. I have created a form validarion behaviour to require the fields that are set as not-NULL in the database. How do I modify the code to allow the date format to be entered in the dob field in the form as DD/MM/YYYY but inserted correctly in the database as YYYY/MM/DD?
Finally, how would I then modify it further to default to todays date?
Here's my code:
<?php require_once('Connections/mypms.php'); ?>
<?php
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = (!get_magic_quotes_gpc()) ? addslashes($theValue) : $theValue;
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO demographics (title, firstname, surname, dob, address1, address2, town, county, postcode) VALUES (%s, %s, %s, %s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['title'], "text"),
GetSQLValueString($_POST['firstname'], "text"),
GetSQLValueString($_POST['surname'], "text"),
GetSQLValueString($_POST['dob'], "date"),
GetSQLValueString($_POST['address1'], "text"),
GetSQLValueString($_POST['address2'], "text"),
GetSQLValueString($_POST['town'], "text"),
GetSQLValueString($_POST['county'], "text"),
GetSQLValueString($_POST['postcode'], "text"));
mysql_select_db($database_mypms, $mypms);
$Result1 = mysql_query($insertSQL, $mypms) or die(mysql_error());
$recordID = mysql_insert_id();
$insertGoTo = "detail_tab.php?recordID=$recordID";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
exit();
$colname_insert = "1";
if (isset($_GET['recordID'])) {
$colname_insert = (get_magic_quotes_gpc()) ? $_GET['recordID'] : addslashes($_GET['recordID']);
mysql_select_db($database_mypms, $mypms);
$query_insert = sprintf("SELECT px_id, title, firstname, surname, dob, address1, address2, town, county, postcode FROM demographics WHERE px_id = %s", $colname_insert);
$insert = mysql_query($query_insert, $mypms) or die(mysql_error());
$row_insert = mysql_fetch_assoc($insert);
$totalRows_insert = mysql_num_rows($insert);
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>address</title>
<script language="JavaScript" type="text/JavaScript">
<!--
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_validateForm() { //v4.0
var i,p,q,nm,test,num,min,max,errors='',args=MM_validateForm.arguments;
for (i=0; i<(args.length-2); i+=3) { test=args[i+2]; val=MM_findObj(args[i]);
if (val) { nm=val.name; if ((val=val.value)!="") {
if (test.indexOf('isEmail')!=-1) { p=val.indexOf('@');
if (p<1 || p==(val.length-1)) errors+='- '+nm+' must contain an e-mail address.\n';
} else if (test!='R') { num = parseFloat(val);
if (isNaN(val)) errors+='- '+nm+' must contain a number.\n';
if (test.indexOf('inRange') != -1) { p=test.indexOf(':');
min=test.substring(8,p); max=test.substring(p+1);
if (num<min || max<num) errors+='- '+nm+' must contain a number between '+min+' and '+max+'.\n';
} } } else if (test.charAt(0) == 'R') errors += '- '+nm+' is required.\n'; }
} if (errors) alert('The following error(s) occurred:\n'+errors);
document.MM_returnValue = (errors == '');
//-->
</script>
</head>
<body>
<p> </p>
<form action="<?php echo $editFormAction; ?>" method="post" name="form1" onSubmit="MM_validateForm('firstname','','R','surname','','R','dob','','R');return document.MM_returnValue">
<table align="center">
<tr valign="baseline">
<td nowrap align="right">Title:</td>
<td><input type="text" name="title" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Firstname:</td>
<td><input type="text" name="firstname" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Surname:</td>
<td><input type="text" name="surname" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Dob:</td>
<td><input type="text" name="dob" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Address1:</td>
<td><input type="text" name="address1" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Address2:</td>
<td><input type="text" name="address2" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Town:</td>
<td><input type="text" name="town" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">County:</td>
<td><input type="text" name="county" value="" size="32"></td>
<td> </td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Postcode:</td>
<td><input type="text" name="postcode" value="" size="32"></td>
<td><input name="Search" type="button" id="Search" value="Search"></td>
</tr>
<tr valign="baseline">
<td nowrap align="right"> </td>
<td><input type="submit" value="Insert record"></td>
<td> </td>
</tr>
</table>
<input type="hidden" name="MM_insert" value="form1">
</form>
<p> </p>
</body>
</html>
<?php
mysql_free_result($insert);
?>
Thank you for your help :-)barrydocks wrote:
thanks for the reply osgood;
I was hoping for a more simple solution than a JQuery date picker, I have read this threat where the SQL queries is aletered:
http://forums.adobe.com/thread/450108
Which I tried but could not make work.
I haven't tried DATE_FORMAT but the example implies that it would work when SELECTING the date from the database to output to a page in a more conventional FORMAT. However you want to INSERT the date using the correct format.
barrydocks wrote:
http://forums.adobe.com/thread/1097555
but I don't know how to use this in my code that already has form validation?
That thread is implying that you would need to convert the date inserted into the form field before it is inserted into the database in the correct format.......so you may as well use a datepicker.
Problem with letting anyone insert a date manually is that a date can be written in many formats which are NOT acceptable by the database. A datepicker overcomes all of these issues. Getting the date back out of the database is a case of simply converting via php into a format which is applicable to your country or your usage OR using the method in the first thread you provided.
Lets see if anyone else can offer a more simple solution for you.
Maybe you are looking for
-
Can't open a file on iCloud (pages)
Hi! Firts of all: sorry for my english, but i'm italian... I just hope you're going to understand me! I got this huge problem: i was writing my thesis for my degree on pages, using icloud because somethimes i opened it on my mac, somethimes on my ipa
-
How do i print from indesign (CS4) landscape without losing the edges.
i'm a PC to MAC newbe. Also moved from CS2 toCS4. can't for the life of me figure out how to print from indesign in landscape layout without losing the left 2.5 inches of print. having the same trouble with #10 envelopes. your help would be appreciat
-
Creation of new Company code in 4.7 Enterpise version
Hi We are having SAP implemented since 4 years with ONE active Company code and 4 other dummy company codes.Dummy means they are only used for financial loan&interest postings between Main company code and other dummy company codes.Dummy company code
-
I have made my own form using acrobat 7 (my operating system is vista.) It is a complex reporting system about 44 pages long. There are 15 or so text fields on the bottom of some pages for comments. I would like to auto fill into a summary all of m
-
System Administrator - undeliverable [0x80040401-0x80040401-0x0003ee]
Hi, We have migrated an environment from Exchange 2007 to 2013. After that move, we've seen a lot of 0x80040401-0x80040401-0x0003ee hitting 5-10 mailboxes at random times throughout the day, and with about 5-10 mails per day. The internet gives a fe