Help me get my email, please!

Hi,
I have just moved into my new university accomadation but they seem to be blocking mail via proxies and i can't seem to access my gmail through mail as going online is a pain.
http://kingston.ac.uk/support/ports.html
This is there page about ports etc and i was wondering if any one would be able to tell me how to configure my email to go around it.
Any help or solutions would be greatful,
Andrew.

Not quite sure how proxies have to do with this...
and...
This would best be asked in the Maill/Addressbook section, but basically, open Mail, Go into Prefernces, and change the SMTP port from 25 to 26. Quit mail, reopen. Try again.
If you still can't send, change that port from 26 to 587. Quit mail, reopen, try again.
After that, you might want to consult your Uni's tech help desk. These are their port blockages.
(if "going online is a pain"...getting AppleMail configured may be a bit of a pain, too...see how these steps go. And check in the Mail/Addressbook sectino out here - this question is asked several times per week, and there may be someone smarter than me over there)

Similar Messages

  • Whenever I open itunes in my ipad a message comes "cannot connect to iTunes Store"...help to get it right please

    Whenever I open itunes in my ipad a message comes "cannot connect to iTunes Store"...help to get it right please, I have  the new I pad and I was able to connect to iTunes before,and I use 3 g network..there is no network problem for sure because I could use safari and App Store perfectly...

    Make sure cellular data is turned on..I checked and it was on
    Tap Settings > General  > Cellular
    Switch Enable 3G to off then back on.
    Same for Wi Fi. Tap Settings > Wi-Fi. Switch off then back on.'
    Then restart the device.
    edited by:  cs

  • HT5568 when i try to install the Safari 6.0.2 update i get the message an error has occured The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please

    when I try to install this update I get the message an error has occured The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please?

    There are problems with the servers. Download and install that update > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

  • Help - Now get same email in both email account and gmail

    I have a droid_razr maxx.  Ever since the update I had the same synching issues everyone had except that I was still getting my emails.  I just always had sync error notifications.  Last week I resynched my email and gmail account and wow - the sync errors went away.  BUT NOW I get the same email twice, both in my email and my gmail.  I went into email and unsynched my gmail account but it still is happening.  I have enough problem managing my emails without having to manage the same emails in two accounts!  I'm sure this has a simple answer.  Please help.

        Thanks for contacting the VZW Support community about this issue, Splitrailfence. Thanks also to my friend Ann154 for her assistance. Splitrailfence, I can see why getting the same email through two different clients can be annoying. If I understand correctly, the duplicate emails are being sent to a single email email address but you're getting copies of the messages in both your Gmail account and your email account. Are both the Gmail and email clients on your RAZR Maxx set to monitor the same account? If so, who is the provider (Yahoo! or Hotmail or Gmail or other)?
    DionM_VZW.
    Follow us on Twitter www.twitter.com/vzwsupport

  • Help me delete my emails, please

    Hello everybody - hope someone can help me. Up until recently I had two ways to check my emails: my computer at home Outlook Express, and when away, I went into BT Yahoo on other computers. Now my daughter has bought me an iPad which is great BUT there is nothing more annoying than getting home to find all the emails I deleted whilst I was away pop straight into Outlook Express! I went into iPad settings to sort it, but it isn't sorted,Furthermore, BTYahoo has jumped on the bandwagon, so on my computer, the emails now come into both, whereas before, if I opened OE and deleted them, they didn't appear in BTYahoo, and vice-versa.  Nothing worse than getting all your emails three times! Any ideas?

    valeofeveshamlady wrote:
    Hello everybody - hope someone can help me. Up until recently I had two ways to check my emails: my computer at home Outlook Express, and when away, I went into BT Yahoo on other computers. Now my daughter has bought me an iPad which is great BUT there is nothing more annoying than getting home to find all the emails I deleted whilst I was away pop straight into Outlook Express! I went into iPad settings to sort it, but it isn't sorted,Furthermore, BTYahoo has jumped on the bandwagon, so on my computer, the emails now come into both, whereas before, if I opened OE and deleted them, they didn't appear in BTYahoo, and vice-versa.  Nothing worse than getting all your emails three times! Any ideas?
    Depending on how you use email, some would consider this a useful feature rather than an annoyance

  • HP W2007v External Monitor - Help to get it working please?

    Hi,
    Using a Macbook running OSX 10.4.11. Just bought an HP w2007v monitor as an external display. Cant get it to work - 'no signal detected' and 'monitor going to sleep'. Obviously everything is powered up and I've got the monitor attached to the macbook using the Apple mini-DVI to VGA cable.
    Have checked the HP website which was no help at all and can't find much here either (with apologies if I've missed the obvious posting holding the answer).
    Would appreciate advice on what I'm doing wrong - if anything.
    Thanks.
    David.

    Hello, David.
    I've been in a similar exasperating situation. Please refer to this thread for a solution that worked for me: http://discussions.apple.com/thread.jspa?threadID=1731505&tstart=0.
    Hope it works for you. Good luck.

  • My iphone 3gs has wiped out my contacts even thought I didn't have a sync or ios update.  Help me get my contacts please!

    My iphone 3GS has wiped out all my contacts and I need help to recover them.  I tried a restore back up and a backup from itunes but I don't use itunes at all so I don't think it worked.  I tried also wonderfone and some type of DFU mode and couldn't find the contacts.  What can I do please help.

    Go to settings do a reset when reset is done you will need to enter your Wireless key for your router. Then go to software updates and download new update 8.0.2 That help me. Bsydd uk

  • Help me with my email please!!

    I was trying to set my work email which is midco email and set up through outlook express and i get all the way to the out going server and i enter the server ect.... and it say warning your outgoing server response: 554 out.vip.midco.net then gives me an ok button and goes back to the setup screen..... is there a fix for this. i only had this incredible for a couple days and i like it other then the battery life lol. thanks dave

    I am guessing you are using the settings shown on Midco's website?
    Incoming: popa.midco.net
    If POP server, server port number = 995 
    If IMAP server, server port number = 993
    Outgoing: smtpa.midco.net
    Port 25 or Port 465
    Requires a secure connection (SSL) or TLS must be checked (depending on the device)
    Outgoing server settings may require full username and password
    Must select ‘Outgoing Server Requires Authentication’
    Do not select ‘Secure Password Authentication (SPA)’
    Username: full email address (ex: [email protected])
    Password: password for email address
    Try the IMAP settings with the k9 app.

  • You helped me get my email photos in photo gallery, now how can I move them to Snapfish?

    I tried reading everything I could find and nothing helped me move the photos so I could download them into a Snapfish album.

    You probably need to save the pictures to your computer, and then open them up on "Snapfish".

  • Anyone can help me get this working please

    Error 1
    'No' is not a member of 'DJ_APP.Module1.TrackType'.
    D:\Year 2 HNC 10 feb\HNCD Unit 20 - Event Driven Programming Solutions (NeathAfan)\DJAPP\DJ APP\DJ APP\Form3.vb
    32 9
    DJ APP
    Error 2
    'No' is not a member of 'DJ_APP.Module1.TrackType'.
    D:\Year 2 HNC 10 feb\HNCD Unit 20 - Event Driven Programming Solutions (NeathAfan)\DJAPP\DJ APP\DJ APP\Form3.vb
    34 27
    DJ APP
    Error 3
    'no' is not a member of 'DJ_APP.Module1.TrackType'.
    D:\Year 2 HNC 10 feb\HNCD Unit 20 - Event Driven Programming Solutions (NeathAfan)\DJAPP\DJ APP\DJ APP\Form3.vb
    79 9
    DJ APP
    Error 4
    'no' is not a member of 'DJ_APP.Module1.TrackType'.
    D:\Year 2 HNC 10 feb\HNCD Unit 20 - Event Driven Programming Solutions (NeathAfan)\DJAPP\DJ APP\DJ APP\Form3.vb
    81 27
    DJ APP
    Error 5
    Expression expected. D:\Year 2 HNC 10 feb\HNCD Unit 20 - Event Driven Programming Solutions (NeathAfan)\DJAPP\DJ APP\DJ APP\Form3.vb
    93 105
    DJ APP
    Error 6
    Identifier expected. D:\Year 2 HNC 10 feb\HNCD Unit 20 - Event Driven Programming Solutions (NeathAfan)\DJAPP\DJ APP\DJ APP\Form3.vb
    103 59
    DJ APP
    Public Class Form3
        Dim numofrecords As Integer
        Dim Filename As String
        Dim Tableformat As String = "(0,-8)(1,-20)(2,-20)(3,-10)(4,-20)"
        Private Sub Form3_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
            FileOpen(1, "Tracks.dat", OpenMode.Random, , , Len(Tracks))
            numofrecords = LOF(1) / Len(Tracks)
            FileClose(1)
        End Sub
        Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
            ' Get the song info from the form
            Tracks.TrackID = txtTrackID.Text
            Tracks.Title = txttitle.Text
            Tracks.Artist = txtartist.Text
            Tracks.Genre = txtGenre.Text
            Tracks.Duration = txtduration.Text
            Tracks.era = txtera.Text
            ' write the record to file
            FileOpen(1, "Tracks.dat", OpenMode.Random, , , Len(Tracks))
            FilePut(1, Tracks, numofrecords + 1)
            'Close file
            FileClose(1)
            ' add one to the number of records
            numofrecords = numofrecords + 1
            Tracks.No = numofrecords
            txtTrackID.Text = Tracks.No
            ' place cursor in id box
            txtTrackID.Focus()
            'clear form
            txtartist.Text = ""
            txtduration.Text = ""
            txtera.Text = ""
            txtGenre.Text = ""
            txttitle.Text = ""
            txtTrackID.Text = ""
        End Sub
        Private Sub Button10_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
            txtartist.Text = ""
            txtduration.Text = ""
            txtera.Text = ""
            txtGenre.Text = ""
            txttitle.Text = ""
            txtTrackID.Text = ""
        End Sub
        Private Sub lstsongs_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lstsongs.SelectedIndexChanged
        End Sub
        Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
            Me.Close()
        End Sub
        Private Sub Button8_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnLoad.Click
            'set the filename
            Filename = "Tracks.dat"
            'open the file
            FileOpen(1, FileName, OpenMode.Random, , , Len(Tracks))
            'check numnber of records in file
            numofrecords = LOF(1) / Len(Tracks)
            'close file
            FileClose(1)
            Tracks.no = numofrecords + 1
            txtTrackID.Text = Tracks.no
        End Sub
        Private Sub btnList_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnList.Click
            'clear list box
            lstsongs.Items.Clear()
            'headings
            lstsongs.Items.Add(String.Format(TableFormat, "Track ID", "Title", "Artist", "Genre", "Duration",
            'open file
            FileOpen(1, Filename, OpenMode.Random, , , Len(Tracks))
            ' Add records to list box 
            Do While Not EOF(1)
                FileGet(1, Tracks)
                lstsongs.Items.Add(String.Format(Tableformat, _ Tracks.TrackID = txtTrackID.Text,
                Tracks.Title, Tracks.Artist, Tracks.Genre, _
                Tracks.Duration, Tracks.era))
            Loop
            'close file
            FileClose(1)
        End Sub
    End Class

    It's not all there and as said before try using the Inset Code Block button in the toolstrip at the top of a post you are editing for inserting your code in so it displays correctly. If you hover your mouse over each tool in the toolbar at the top of a post
    you are editing a tooltip will display providing what each tool is for. Like
    B is for Bold.
    You don't display any code for DJ_APP.Module1 or provide what you are attempting to do with the code you have and nobody has a .Dat file that you may be using for testing with.
    And it seems like you may be using relatively old style coding techniques when databases like
    Microsoft SQL Server Compact 4.0 are free and downloadable from Microsoft and others unless you enjoy using .Dat files for some reason.
    Plus you could use DataGridView for displaying things like ("TableFormat, "Track ID", "Title", "Artist", "Genre", "Duration", 'open file") whatever all that is with the DGV using a DataTable since
    different fields in a DataTable can be different types. AFAIK you could even store all the audio tracks in a database.
    I would recommend you take a step back to design your GUI regarding what controls it will use for what it needs to do as well as what capabilities can be used with those controls and learn about that for a while before writing any code.
    I would've researched DJ apps to see what visual styles they have and how they work before designing a GUI and writing any code.
    Google search results for "Radio station music scheduling software"
    La vida loca

  • How do i get my email back?

    for over a month now ive been fighting microsoft about my email account *****@live.com first off they blocked it and i dont know why then they would not let me in, every time i ask for a password reset they dont send me the needed email to the linked account
    *****@gmail.com ive tried that many many times then i got fed up with that not working so i tried to prove that im the owner and that omasaki34 was me that seemed to work but still nothing no password reset links or anything so i made a new outlook account
    so i can talk to tec support i still got nowhere i keep getting the run around check this link try doing this and NOTHING WORKS so i thought that is i try the ownership form on the outlook account that it might have better odds of getting the reset email i
    need BUT using the same info i used the first time as proof that im the owner they say that its not enough info for proof *facedesk* so what the hell am i to do at this point? you wont send me the needed emails to my linked account and you wont let me link
    a new one am i just to say its gone? im never again to access my email account? hell give me a phone call and i can tell you all the things that are in the locked account, i can tell you how sent emails to it i can tell you who i sent emails to, what the hell
    do you need for me to get my email back? and just to point out if the first thing a tec support guy says on this page is "Did you try this? (Link)" then something is getting shot
    please just help me get my email account back in order ill even give you my phone number so i can talk to you live and give all the needed proof and whatnot im just getting sick of all this B/S 

    Omasaki33
    Currently, Microsoft  only provides forum support to help our free customers, for account related issues see the new secure online forms here
    Unfortunately there is no "live", email, chat, or "phone" support for Live.com, or Outlook.com
    If you have gotten support by live, phone, or chat, for Outlook, you may have been scammed.
    The Microsoft account forum has been retired and all account related questions must now be asked online here  
    Wanikiya and Dyami--Team Zigzag

  • Can't get any email since early this AM

    I'm using OS X 10.7.3; my mail preferences say my SMTP server incoming mail is "p02-imap.mail.me.com" (and that info is grayed out). In the advaced section the IMAP path prefix is blank; Port is 993, SSL checked, authentication is Password.
    The connection doctor says Mail is connected to the internet, green light at iCloud, red light at smtp.me.[myusername] Trying to log into this SMTP account failed. Verify that the username and password are correct.
    Show detail brings down an empty box. Also, "Network Diagnostics" is grayed out.
    All attempts to send me email (i.e. from my husband's computer have failed.
    Please help me get my emails!

    For about 8 hours now I cannot get my email on my .me account in any device... Whas going on apple?

  • Can someone help me get TomCat working and...

    I downloaded Tomcat, initially so that I could have the servlett packages.
    When I try to compile I am still getting the error package.javax.servlet does not exist?
    In addition when I try to startup TomCat I get
    The JAVA_HOME environment variable is not defined correctly
    This environment variable is needed to run this program
    Using CATALINA_BASE: C:\jakarta-tomcat-4.1.18
    Using CATALINA_HOME: C:\jakarta-tomcat-4.1.18
    Using CATALINA_TMPDIR: C:\jakarta-tomcat-4.1.18\temp
    Using JAVA_HOME: C:\jdk1.3.1_04\bin
    The system cannot find the file -Djava.endorsed.dirs=.
    Can someone help me get past this please.

    When I try to compile I am still getting the error
    package.javax.servlet does not exist?Have you included %CATALINA_HOME%\common\lib\servlet.jar in your classpath? Since servlet class files are not intergrated with the jdk, you must explicitly include them in your classpath to use them.
    In addition when I try to startup TomCat I get
    The JAVA_HOME environment variable is not defined
    correctly
    Using JAVA_HOME: C:\jdk1.3.1_04\binTry setting JAVA_HOME=c:\jdk1.3.1_04
    Hope that helps.

  • Ive synced my 4s on my laptop and now got over 4000 photos on my phone in different albums how do i get them off please???

    ive synced my iphone 4s onto my laptop and now have over 4000 photos on my phone in different albums and cant delete them can some1 help me get them off please???

    In the device sync pages select Photos on the top at the right.
    Un tick Sync Photos
    Apply

  • C3 touch and type HELP with mms and email

    I have a C3-01 touch and type my provider is AT & T I need any help to get my email settings and internet settings AT & T have been NO help since i did NOT buy my phone threw them!!! At first I had trouble with receiving pic messages and send pic messaging so i sent a question threw nokia and someone had the settings i followed the steps and now i can receive and send pic messages and AT & Twas trying to tell me I wouldn't be able to since i didn't buy my phone threw them they were of NO help so now i am asking anyone that can help again i need the steps to set my phone so i can get my email and internet any one with info let me know THANK YOU!!!   Iove this phone i just can't get any support from AT & T

    herzlos:
    What firmwire do you currently have?
    Turn off your phone and then turn on your phone. Usually resetting the phone temporarily fixes the problem
    My Nokia C3-01 Software details:
    V 05.60
    06-10-10
    RM-640
    (c) Nokia
    Found this by: Menu>Settings>Phone>Phone updates>Curr. sw details

Maybe you are looking for

  • Error in starting form server on Redhat 7.1

    Hi, i have installed oracle9iAS 1.0.2.0.0 on redhat 7.1 successfully with out any error but when I start forms server it gives error like: failed to exec runform f60webm [error:2] WHen I look in make.log file it shows errorr like gcc: /usr/xllR6/lib/

  • Size of photos is wrong

    Why is it when I place a photo in Pages it changes the size of the image? I'm placing .psd files (Photoshop Images) that have been sized correctly but in Pages they are completely wrong. Please help.

  • Why wont my phone send or receive calls. keeps saying mobile network not available

    goes straight to voicemail when someone calls me and wont allow mine to go out              

  • Dashboard in visual composer

    Hi, We are using dashboard in Visual compser. It has two variables defined .One is on plant and another on Calendar month. If i execute same query in bex analyser, everything works fine. In dashboard also we get proper results. But we get 2 error pop

  • Oracle BPM process

    Hi,All, I have a urgent requirement for my BPM project i just giving the scenario:- I have a initiator who initiates the process,after initiating the process a instance goes to the next level who is the Team Leader .Now this team Leader has a UI asso