Help me get my hp 7 1800 working

please help get my hp 7 1800 tablet running correct
thank you ,charlie [edited by Moderator]

Hi @36993699 ,
Thank you for visiting the HP Support Forums. Unfortunately I had to edit your post and remove your last name.This is in direct result  from our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
For your own safety last names are not allowed in any posts. If you have any questions feel free to send me a private message in reply.
Thank you
I work for HP

Similar Messages

  • Need help in getting proposed approvers for a work item

    Hi All,
        We are trying to get the proposed approvers and the actual approver details for a particular work item.
    Before the work item is actioned we are able to see all the proposed agents for that particular work item.
    But once that work item is actioned then only the agen who has actioned on the work item is appearing in the list. All other agents are not appearing.
    For this we are using the FM BBP_WFL_DIN_APPR_WORKFLOW_GET.
    We have also tried some other FM's and tables, but none of them were helpfull.
    Please let us know if you know any table or FM or class which we can use to get these details.
    Scenario:
    Work Item: 12345    
    Before action on the work item
    Possible(Proposed) agents: Agent 1, Agent 2, Agent 3.
    Actual Agent: blank
    What we want, after action on the work item if "Agent 2" acts on that item.
    Possible(Proposed) agents: Agent 1, Agent 2, Agent 3.
    Actual Agent: Agent 2
    But what we are get is:
    Possible(Proposed) agents: Agent 2.
    Actual Agent: Agent 2
    Thanks a lot.
    Regards,
    Kranthi.

    Hi,
    What did you draw those lines with ???? Just a drawLine() command ????
    If so, it is very difficult to track the exact mouse coordinates that correspond to a click at a particular place and then place an 'X' or an 'O' there !!!!
    Try implementing it with 9 Buttons placed at those specific positions. In this case, it will be very simple to track the user's input when he clicks on any of those buttons...the implementation will become really simpler.
    Check it out !

  • Need help in getting common DOM API to work

    Grettings, all -
    I'm up against the wall. I have spend a lot of time trying to get Common DOM API to work to no avial. So far I tried it with Netscape 6.2.3, Mozilla 1.0 and MSIE 6. My problem is that while I get non-null Document, all calls on it return null. Here is the code snippet I have:
    public class Foo extends Applet {
    Applet m_appletThis;
    StringBuffer m_sbuf;
    public void init() {
    m_appletThis = this;
    m_sbuf = new StringBuffer();
    addItem("initializing... ");
    try {
    JSObject jsWin = JSObject.getWindow(this);
    JSObject jsDoc = (JSObject)jsWin.getMember("document");
    String sName = (String)jsDoc.getMember("name");
    Object oLocation = (JSObject)jsDoc.getMember("location");
    addItem("location=" + oLocation);
    String sTitle = (String)jsDoc.getMember("title");
    addItem("title=" + sTitle);
    addItem("initialized! ");
    catch (JSException e) {
    e.printStackTrace();
    public void start() {
    addItem("starting... ");
    DOMService ds = null;
    try {
    ds = DOMService.getService(this);
    String sTitle = (String)ds.invokeAndWait(new DOMAction() {
    public Object run(DOMAccessor da) {
    Document doc = da.getDocument(m_appletThis);
    return doc.getNodeValue();
    addItem(sTitle);
    // let's try again
    Document doc = (Document)ds.invokeAndWait(new DOMAction() {
    public Object run(DOMAccessor da) {
    Document doc;
    NamedNodeMap nnm;
    Node node;
    doc = (Document)da.getDocument(m_appletThis);
    nnm = doc.getAttributes();
    NodeList nl = doc.getChildNodes();
    if (null == nl)
    addItem("no children!");
    else
    for (int i = 0; i < nl.getLength(); i++) {
    node = nl.item(i);
    addItem((null == node) ?
    ("no node" + i) : node.getNodeName());
    if (null == nnm)
    addItem("no attribs!");
    else {
    node = nnm.getNamedItem("location");
    if (null == node)
    addItem("no node!");
    else
    addItem(node.getNodeValue());
    return doc;
    catch (DOMUnsupportedException e1) {
    e1.printStackTrace();
    catch (DOMAccessException e2) {
    e2.printStackTrace();
    addItem("started! ");
    public void stop() {
    addItem("stopping... ");
    public void destroy() {
    addItem("preparing for unloading...");
    void addItem(String newWord) {
    System.out.println(newWord);
    m_sbuf.append(newWord + "\r\n");
    repaint();
    public void paint(Graphics g) {
    Dimension dim = getSize();
    //Draw a Rectangle around the applet's display area.
    g.drawRect(0, 0, dim.width - 1, dim.height - 1);
    //Draw the current string inside the rectangle.
    g.drawString(m_sbuf.toString(), 5, 15);
    This produces the following output:
    initializing...
    location=file:///foo.bar.html
    title=
    initialized!
    starting...
    null
    no children!
    no attribs!
    started!
    As starting/started lines show all of my attempts to get access to browsers DOM fail.
    I will really appreciate any advice you can provide. Thanks in advance.
    - Andrew

    hi,
    i desperately tried similar things and, after studying some forum entries, it seems to me that common dom DOES NOT WORK...
    sorry for us, but bugparade promises to fix that in 1.4.2 (somewhen in 2003 :-( )
    if you need dom-access try jsobject or the ibm directDOM-technology, that seems to work much better..
    greets,
    dirk

  • Help ! Getting a G4 AGP to work with OSX

    I have inherited a G4 AGP (400) which I want to setup as a network server. The HDD had been blanked so I needed to reinstall OS. I could not get OSX (10.4) to load, so loaded the barely remembered 9.22.
    I then tried to run the firmware upgrade - not successfully. I have rebooted, zapped the pram, reset-nvram, reset-all (in macboot) all without success. I have checked the ram (and removed dodgy ram), battery seems fine
    I have cloned (using super duper) the osx drive from my ibook and swapped that as the HDD and that will not load.
    How do I overcome a firmware upgrade in os9.22 which will not run ?
    How do I create a bootable OSX drive to put in the G4.
    I have an original (retail) DVD for 10.4, software restore disks for a G3 imac (9.21), a variety of external drives and both super duper and data backup - so should have all the hard and software to get this powermac working - but I am stumped.
    Any experts out there who can help ?

    My reply is concerning the Tiger install. I don't feel that a clone of 10.4 off of an ibook is going to run reliably on a G4. Each machine has different drivers they use. Some, here, say they have done things like this with success, but many others, here, don't recommend it. A fresh install of Tiger would be way better. When you tried installing the retail disk, what happened please? Of course, even if it installed it may not run well, or at all, without a firmware update. I was able to run Jaguar without an update, but had some issues. I don't think Tiger will do well at all.
    Are you able to go to "About This Mac", in Tiger, listed under the blue Apple; when screen comes up, click the "More Info" button and check the Boot ROM version (firmware)? Mine is 4.2.8f1 ; correct for my Gigabit Ethernet model to run OSX. Here is the list of firmware updates. Could yours already have been updated? Maybe the clone is why Tiger doesn't work well?
    Cheers!
    DALE

  • Help? get plus + (R) has stopped working when loading Flash player

    When trying to install flash player - I get this message and then it says a problem has stopped the programme working properly. Windows will close the programme and will notify me if a solution is possible. Now stuck as nothing happens
    Any advice?

    Hi, what operating system, and browser(s) and versions?
    What Anti-Virus/Firewall do you use?
    Thanks,
    eidnolb

  • Can anyone help me get the onboard 5.1 working through optical?

    990FXA-GD80
    Windows 8.1
    Pioneer XV DV55 (connected via optical to motherboard)
    If I go to Control Panel/Sound I have the Realtek Digital Output (Optical) selected and when I go into the properties of that device I can highlight Dolby Digital, hit the test button and I do get the test sound in all of the 5.1 speakers BUT in game (BF4 and BF3) or anywhere else I can't get the surround to work, everything is just 2 channel?

    Quote from: RipGroove on 01-December-13, 23:58:04
    Yep have tried all settings in game, receiver just dosen't seem to pick it up.
    Ok, I had just forgot to check those the other day with my surround headphones, that's why I asked, lol.
    I did some digging around, apparently you are not the only one with this issue. Seems Realtek might sort of be your culprit. I didn't fully get everything I read, but the long and short of it is that DVD/Movies etc are coded 5.1 and simply pass through the optical...while the game's surround need to be generated...and it is, but only through the analog outs...not the digital. Confused yet?
    Quote
    Correct, and this is normal. Movies/DVD's are already encoded in Dolby Digital or DTS formats, which can be carried over SPDIF. Games however, use uncompressed audio, and an uncompressed 5.1 audio signal can NOT be carried over a SPDIF connection, so you get 2.0 instead.
    The only way to solve this problem is to get a soundcard that can handle real-time encoding to either Dolby Digital or DTS. [A cheap option is the ASUS Xonar DX [Dolby Support only] or the HT Omega Striker, both going for about $80 or so]
    ~ gamerk316 at [H] http://www.tomshardware.com/forum/259712-28-realtek-audio-optical-games#.
    Question: Do you have an ATI card? I wonder if you ran your sound out of it via HDMI if that might work? Depends on your receiver really, my receiver takes the audio and video in via HDMI then spits it out to my TV. (That way I can plug multiple devices into it.) If you have an ATI card and a receiver like mine you could probably pull it off, otherwise you will need a better sound card.
     

  • Need help in getting Shares between two Macs working again

    Hi,
    having upgraded my late 2009 Mini and mid-2010 MacBook to Lion, everything appears to be running just fine thus far – except for one item: Before the upgrade, I had set up both computers to be listed in the Shares section in Finder, so as to allow swapping files back and forth. This does not seem to be working as it did before any longer. I did manage to access the MB from the Mini once earlier today, but haven't been able to make this permanent.
    As the Mini does not support AirDrop (as of yet anyway), this option is no alternative for me, so I'd be very glad if any of you could help me out here.
    Many thanks in advance .

    You can re-download purchased apps for free:
    http://support.apple.com/kb/ht2519

  • Help to get quicktime 10.1 to work in Lion 10.7.8

    Since updating from Lion 10.7 to 10.7.8 my quick time 10.1 will not play .wmv files. The movie loads but does not play. 

    Try the Firefox forum:
    http://support.mozilla.org/en-US/questions?tagged=mac-os-x-106

  • How do i get my ipod touch to work its showing disabled in red

    can someone help me get my ipod touch to work.Its showing a red disabled sign and wont move or do anything.Help Me

    This is the itunes U forum.
    Since your question has nothing to do with itunes U, it would serve you better to post in the ipod touch forum.

  • Has anyone been able to get a Canon LBP6000 to work in Lion?

    Any help with getting my Canon LBP6000 to work would be greatly appreciated.

    There's a new driver on the USA website:
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
    Before installing you will need to trash the CAPT folder, located in HD > Library > Printers > Canon. And perhaps restart.

  • Hello ive been trying to get this matter token care of for the past 24 hrs and still no help im getting very upset now I paid 100 plus $$ to have this program that isn't even working I would like to speak to someone about on the phone I got a 1800 number

    hello ive been trying to get this matter token care of for the past 24 hrs and still no help im getting very upset now I paid 100 plus $$ to have this program that isn't even working I would like to speak to someone about on the phone I got a 1800 number for tech but everytime I call it hangs up and says to chat........ ive been doing that all day yesterday its kinda getting old telling the same thing over n over again so I would like some real live help a number I can call or someone can call me 402 802 1211 everytime I try to do something on this it ask for my serial num I put it in and it says invalid number and when I do my pics it has trail across them

    Hi,
    I'm sorry to hear that you are having problems but this is a user to user forum and only occasionally visited by Adobe staff. Depending on your version of Photoshop elements, you may be able to get help through the chat sessions starting here
    https://helpx.adobe.com/uk/contact.html?promoid=KLXNA
    If you give us details like your operating system, Photoshop elements version and the problem you ae having, someone may well be able to help you.
    Brian

  • Help with getting this to work!

    Hi,
    I am trying to get this Java application to work - but nothing seems to happen! Basically, its a chemical formulae analyser, e.g. in CaC03, C is the symbol for Carbon and there is 1 atom of this element, Ca for Calcium (1 atom), O for Oxygen (3 atoms). The application should ask the user for input (chemical formulae) and then analyse the formula and identify the symbols present together and the number of atoms of the corresponding element.
    The elements should then be identified and a table displayed showing the elements present together with the corresponding number of atoms. Appropriate error messages should be displayed for any invalid data.
    Now the code I have seems fine to me, but when you run the application, nothing happens! There are no error messages, but just nothing happens! I have two files, InNeedOfHelp.java and InNeedOfHelp.class, and the InNeedOfHelp.java file contains the following code (but nothin happens when run as I have stated!): -
    import java.util.regex.*;
    public class InNeedOfHelp {
    /* names should be loaded dynamically from that file */
    private String[] names = {"H", "C", "Ca", "O"};
    private Matcher matcher = null;
    private Pattern pattern = null;
    public static void main(String[] args) {
    InNeedOfHelp inoh = new InNeedOfHelp();
    for (int i = 0; i < args.length; i++) {
    if (inoh.isValid(args[ i])) {
    inoh.check(args[ i]);
    } else {
    System.out.println("Illegal formula: " + args[ i]);
    public InNeedOfHelp() {
    String regex = "([A-Z][a-z]?+)([0-9]*+)";
    pattern = Pattern.compile(regex);
    matcher = pattern.matcher("");
    /* Element name needs real solution, current implementation is too static ;) */
    private String getElementName(String s) {
    if ("H".equals(s)) {
    return "Hydrogen";
    } else if ("O".equals(s)) {
    return "Oxygen";
    } else {
    return s;
    private String getElementCount(String s) {
    if ("".equals(s)) {
    return "1";
    } else {
    return s;
    public boolean isValid(String formula) {
    String regex = "((";
    for (int i = 0; i < names.length; i++) {
    regex += (i == 0 ? "(" : "|(") + names[ i] + ")";
    regex += "){1}[0-9]*)+";
    return formula.matches(regex);
    /* check needs better name and should be redesigned to just collect data */
    public void check(String formula) {
    int end = 0;
    matcher = matcher.reset(formula);
    while (matcher.find(end)) {
    end = matcher.end();
    System.out.println("Element " + getElementName(matcher.group(1))
    + " occured " + getElementCount(matcher.group(2)) + " time(s)");
    So, if anyone could help me with this application I would be very grateful! Thanks guys.

    If nothing happens, as a first step I suggest putting in some System.out.println statements in the main method to find out what happens with isValid(). It usually makes sense to look for easy problems first. May be your command line arguments are not valid, or your isValid methods thinks they aren't anyway.

  • How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

    How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

    Oh, and it is on a macbook pro

  • Can someone help me with getting ccbill's codes to work with a flash based website?

    I have built a pay per view site entirely in flash. I set up the account with ccbill and they gave me the codes for the gallery buttons. The problem is the codes are 1. html and 2. there not url's. The picture galleries are in the same folder on the server as my html and swf files. Is there actionscript to get the ccbill codes to work? Here is one of the codes ccbill sent:  <A HREF="http://www.lexiefyfe.com/ccbill9001/index.htm"><img src="ccbutton.jpg"></A>
    Thanks for any consideration or help with this matter.
    wstcstkd

    Hi Civilclerk1,
    In order to achieve your requirement, we can try to use the following expression to instead the last_name column and first_name field:
    last_name: =iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,Fields! last_name.Value,nothing)
    first_name: =iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,Fields! first_name.Value,nothing)
    Besides, if we don’t want see the blank row in the tablix, we can add a filter as below in the tablix:
    Expression:=iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,1,0)
    Operator:=
    Value:=1
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hi deamayfield,
    Thanks for visiting Apple Support Communities.
    If your Music app is unresponsive, try restarting/resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Best,
    Jeremy

Maybe you are looking for