Help me i have need to instal emulator as400 5250 on bb curve 8310
Good Morning,
there is the sw emulator as400 ibm 5250 to install and use on the bb curve8310
thank for any people thath help me
ilario
Hi and welcome to the forums!
What company makes the software? There are several brands.
Please be more specific, OK?
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Similar Messages
-
I purchased the QuickTime MPEG-2 component for Quicktime as I am using Snow Leopard (10.6.8) and I want to be able to via MPEG-2 transport streams.
I paid £14.00 - everything downloaded and installed fine but it doesn't work and I am still unable to view the transport streams in Quicktime even though according to the website this is want the component will let me do.
I have rebooted several times, reinstalled both Quicktime and the MPEG-2 component and still nothing. I have then spent ages going around and around in circles on the website trying to find a way of emailing customer services or technical support to get some assistance but I just always end back in the same place no further forward.
Please can anyone else offer any suggestions - either how I can get it working or how I can get my £14 back from Apple!!I purchased the QuickTime MPEG-2 component for Quicktime as I am using Snow Leopard (10.6.8) and I want to be able to via MPEG-2 transport streams.
I paid £14.00 - everything downloaded and installed fine but it doesn't work and I am still unable to view the transport streams in Quicktime even though according to the website this is want the component will let me do.
1) Suggest you reread the "Feature" details for the QT MPEG-2 Playback Component paying particular attention to the paragraph titled "Can transport streams be played?" which clearly states that this codec does NOT support the playback of transport stream (TS) files.
2) This codec can only be used with "classic" QT apps such as the QT 7 player, GarageBand, or third-party apps like the free MPEG Streamclip app.
3) The VLC player intrinsically supports TS files. MPEG Streamclip with the QT MPEG-2 Playback Component installed supports TS file playback.
4) MPEG Streamclip with the QT MPEG-2 Playback Component installed can also resave muxed TS file content as muxed program stream (PS) content which is then "playback" compatible with both QT 7 and QT X players (assuming you select an audio compression format compatible with both) or convert the muxed TS content to QT "edit" compatible compression formats if desired.
Please can anyone else offer any suggestions - either how I can get it working or how I can get my £14 back from Apple!!
Apple seldom makes refunds to people who successfully purchase software which they do not really understand how to use—cavaet emptor. It is difficult to make suggestions here without knowing more about your personal preferences and/or work flow requirements. I personally would keep the codec to enhance various playback, conversion, and editing options on my Mac. -
Need to install Power Query with Internet Explorer 8
Hello, could someone please help me?
I need to install Microsoft Power Query to allow me to easily merge excel tables from different worksheets (files).
The problem is that I am restricted to Internet Explorer 8.
Here are my specs, I cannot change these:
Windows 7, 64-bit operating system
Excel 32-bit, Professional Plus 2010
Internet Explorer 8
When I try to install Power Query, I get the message that I need IE 9.
I and others have other browser-based tools that only work on IE 8.
There must be some work-around for this.
I do NOT require the internet-searching feature of Power Query.
Here are some possible options?
Go into Control Panel and manually switch IE versions each time (not a feasible method at all)
Force Power Query to work using Chrome or FireFox instead
Disable certain features of Power Query to allow installation with IE 8
This is really disappointing, I don't understand why we can't just have Power Query install regardless of IE version.
Some functions could be disabled, but at least we could still use the actually important tools.
Thanks for your help. Any input is appreciated.Hi,
As far as I know,
Microsoft Power Query for Excel requires Internet Explorer 9 or greater. Windows operation system will check the system requirements before starting installation. Thus, we could not do the options which you mentioned above.
Then, we may try to find the workaround to get your original purpose: Merge excel tables from different worksheets (files).
1. Try to use
PowerPivot
http://www.powerpivotpro.com/2012/09/combine-multiple-worksheetsworkbooks-into-a-single-powerpivot-table/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
2. Try to use VBA code
http://msdn.microsoft.com/en-us/library/office/gg549168(v=office.14).aspx
3. If you have Excel 2013, we may try the new featuer "Data Model " in Pivot table:https://support.office.com/client/Tutorial-PivotTable-data-analysis-using-a-Data-Model-in-Excel-2013-f9ad8310-3b5b-48a3-913d-5cc1b364ee46
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Help Blackberry Curve 8310 os4.5
Please help I'm trying to install tuDing app on my Blackberry Curve 8310 running os4.5 and it says that 2 modules are missing,please check the picture.
I would contact the developer of the app. Their email is [email protected]
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion. the box says, "To open JavaApplication, you need to install a Java 6 SE runtime. Would you like to check for and install one? (smaller print) Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading. A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
Finally there are two boxes to click. One says not now. If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away. If I click on the second box, Install, it says The software is currently unavailable. To install a Java SE 6 runtime later, open Java Application again.
My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help. My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can. Help.Does this happen immediately after you log in? If so, one of your login items is probably causing it.
-
Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanksYou are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
ThanksIf you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669 -
Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL
You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard -
I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.
You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6. -
I have tiger 10.4.11. In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher. Is there a way that I can upgrade from tiger to leopard? Help!!
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
You need to install flash player even if i have installed already, please help
Hi,
1. I cannot listen to many things on my Macbook pro (OX 8.5) by telling me "you need to install adobe flash player" although every time I reinstall once. Please help.
2. I did not install leopad or lion, but I use other page, keynote and numbers, do I still need to upgrade the latest lion?
thank you for your help
mynurSome malicious site try to get you to install malware by saying yo have to update Flash.
Only update Flash via Adobe's site.
What version of Flash is currently installed?
In System Preferences they may be an entry for Flash in Lion. I do not remember. There is for Yosemite -
Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help
Hi shannonr98244154,
Flash player is not supported on mobile devices
-Varun -
I have the 64bit version of itunes on windows 7. When I connect my iphone5 it says that I don't have the correct software and that I need to install itunes 64bit! And I can go no further! I've uninstalled and reinstalled but it makes no difference. I have no access to other computers so at the moment I don't have a backup for my iphone should anything go wrong.
Please Help!Hello ekbowers,
It sounds like you have installed the 64 bit version of iTunes, but you continue to the get an error message that suggests to download the 64 bit version any time you connect your iPhone 5. I understand that you have already uninstalled and reinstalled iTunes, but sometimes you may need to uninstall additional components related to iTunes to completely remove it from your system.
I recommend following the steps in this article to completely uninstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Once you have completely uninstalled iTunes, you can download the 65 bit version of iTunes for Windows here:
iTunes 11.0.4 for Windows 64
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Best,
Sheila M. -
my iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.
What version of iPhoto are you using? 9.6 is the current version.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.iPhoto.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.
Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.
Maybe you are looking for
-
My computer is Win8.1 64bit. Where can i download Adobe acrobat DC 64 bit? The application manager always download 32 bits application for me! (I tryed PS and AI just now. the application manager installed 64bits PS and AI. Why it can't find a 64bit
-
How can I add new music to my ipod without losing the music already loaded on another computer
I Can't load new music onto iPod with my new computer without losing all that is already there.
-
Urgent: New database with restored tape backup - step by step
Hi Oracle: 9.2.0.6 OS: AIX 5 There is an old full cold database backup on the TAPE drive which includes spfile and control files etc. I have been asked to restore this database to a new server (AIX 5). I am a new dba with less hands on restore/recove
-
IPad Folio Overlay Preview Only Displays One Orientation at a Time
I have a simple two page InDesign doc created from the ground up for DPS. It has some text, image, slider overlay, and video embedded, and has a file_v vertical (portrait) layout and file_h horizontal (landscape) layout. My problem is when I preview
-
i tried updating my phone for the first time and i forgot that i had to plug it into iTunes. Now it just keeps asking for me to plug it into itunes but i dont have a home computer to do that with. how can i get my phone back on?