Help me! I met a big problem
I am using Flex Builder 1.5, today when i compile a mxml file
, i received the following error:
[exec] Error: Branch between 7684 and 41198 around line 0
exceeds 32K span.
If possible, please refactor this component.
What should i do?
thanks in advance.
Hello -
This is an error that is produced in Flex 1.5 in order to
alert you that
your code needs refactoring in order to decrease the number
of visually
rendered mxml tags in a single file. There is more
information in the FAQ
here, including how exactly to refactor your code:
http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt
Best,
Deepa Subramaniam
"isml" <[email protected]> wrote in message
news:e4gpkj$43r$[email protected]..
>I am using Flex Builder 1.5, today when i compile a mxml
file , i received
>the
> following error:
> [exec] Error: Branch between 7684 and 41198 around line
0 exceeds 32K
> span.
> If possible, please refactor this component.
>
> What should i do?
>
> thanks in advance.
>
Similar Messages
-
Please help me, i have a big problem, thank
hello, sorry for English, but i'm italian.I have a big problem with pre 9. Until yesterday i was working quitley on editing a video of 2 hours; this morning i didn't open anything, even a new project, i open the home of pre and load the project but after the screen remains blank, even if i load a new project. I updated the video card driver (intel hd graphics), i download quick time i had already downloaded, unistalled and re-install the program several times but nothing. I have windoes vista intel core i3, 2 gb of ram. Please help me, yesterday was fine, today i don't know what happens, i'm goin crazy. Thanks a lot I wait for responce, exume for english.
When someting works one day, but not the next, then something has changed. Finding out what the change is, can be tough.
Most people have their OS set to update automatically, and they are unaware that an OS update, or hot-fix has been applied. That can change things drastically, and especially with regards to things like audio and video drivers.
Having an Intel, embedded graphics chip, will limit you on the drivers, as they make good chips, but seem to ignore writing drivers to support those.
Since things did work, just a day, or so, ago, I would first do a System Restore Point for now. Do this manually. Then, I would reboot to Safe Mode, and choose an earlier System Restore Point. You will be required to reboot. Test things with that earlier system configuration. Please report if things work, as they recently did. Now, if they do, you have at least tracked down a time frame, when something changed. Finding out what it was, is still a task.
For general PrE problems, see this ARTICLE.
Good luck,
Hunt
PS - I have no issues with your English. Like Bob Dix, my Italian is very limited - Gaja, Amarone, Barolo and Imàgo at the Hassler Roma. -
When I try to start firefox it starts to open but then suddenly dies everything. it appears in Task Manager that it is running. I have tried everything but nothing works. so please help me fix this problem so I can continue to use firefox.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
See also:
* http://kb.mozillazine.org/Browser_will_not_start_up -
HELP!!!! BIG PROBLEMS WITH REFINEMENT TOOL
I JUST bought CS5 primarily for the Refinement Tool....followed Lynda's tutorial to a tee....turned out great, but when tried on my own...I got HUGE transparent places in finished product. .... including those in the original selection. Anyone running into this same problem or have a FIX???? Tried the selection, thinking that might be the problem and even two pictures using both the Quick Mask and the Magic Selector with the same results!!! Once it's transparent....png.... There NOTHING you can do as there is no longer those pieces. It even cut one eye out of the little girl! HEEEEEEEEEEEELLLLLLLLLPPPPPPPPPPP!
Kathi T.Hi Amazonian,
I read through your issues and I can help with two, firstly the Printer you wish to use (Officejet 6110) is the exact same one that I use and I have an intel iMac 20", It prints off everything that I ask of it. I also use Mac Microsoft Office 2004 and that too works fine and prints for me. Your issue with internet plug ins is due to the plug ins not being universal applications (eg they are PPC apps only) so a quick fix is to do a Get Info on the Safari icon and then when the info box is displayed check the box OPEN USING ROSETTA to force it to use PPC code. You can now run the realaudio and realplayer plug ins now as well as any other PPC plug ins.
Hope this helps you.
good luck -
Help! My Iphone has big problem.
Firmware of my Iphone may be damaged a few days ago.
It can boot in only recovery mode showing 'Please Connedct to Itunes' and not in normal mode.
If I try to restor with Itunes, finally I had error showing "The Iphone could not be restored. There is not enough memory available".
What can I do?
I have no work for my IPhone.It would be pretty clear that bringing your phone to an apple store, or calling apple would be the only way to get your problem solved.
They will be able to diagnose and fix your problem. -
Hello please help me i have very big problem !!!
Hello Can I use photos in video like in Photoshop CS6? Example: İn Photoshop CS6 we can use photos in while we was prepearing video.Can we do it in Prelude ? So can we use photos in the videos ? Because I prepare videos with photos in CS6 but ı deleted it and ı want setup Prelude but ı have question can ı use my photos in video ?
Hi -
Yes! Prelude does support still images. You can add them into your rough cuts as well - and then when you send your rough cuts into Premiere Pro you can handle any special image manipulation/sizing/positioning/etc. there.
Hope this helps -
Michael -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
Hi There
Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
Thank youWhat program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager? -
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now
Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Hi, dear friends,
I have a big problem:
Since I installed OS 10.9.3 MAV (Maverick), I am unable to use Adobe CS6. Each opening Photoshop attempt, the system tells me an error of type 6 or 16.
Thank you for your help, Guys,
Marius SANNAWhich version of Photoshop do you have? The current version is 13.0.6.
-
Having big problems with Creative Zen Micro Photo!! I need much urgent help!
Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PMMight try this:? http://forums.creative.com/creativel...mp=true#M95059
-
Please Help : Big problem with applets
Hi,
I have a big problem which I have not been able to figure out. The applet I have enclosed works fine on some computers but not on others .
I am running :
java version "1.3.1_02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_02-b02)
Java HotSpot(TM) Client VM (build 1.3.1_02-b02, mixed mode)
The applet runs perfectly Ok at university but not on other computers.
The objective of the applet is to display 3 shapes on the screen once. On the university computer it works, however at home and work the 3 shapes are continuously displayed on the screen ( like they are in some infinite loop). I have been struggling with this for days any help would be greatly appreciated.
It would help me if some of you could run this applet and let me know if the shapes are displayed once or if the shapes are continuously updated on the screen ( assuming that the applet window is not resized covered over etc. )
=========================================
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
/*<html><applet code = "stage1.class" height = "600" width="810"></applet></html>*/
public class stage1 extends JApplet{
JPanel extraPanel = new JPanel();
public void init()
Container c = getContentPane();
extraPanel.setBackground (Color.white);
extraPanel.setLayout (new FlowLayout());
c.add(extraPanel);
public void paint (Graphics g)
//super.paint( g ); // call superclass's paint method
// populate the two dimensional array - store the coordinates for the circle and square shapes
int circle[][] = { {100,100,200,200}, // display circle in the left hand side of the screen
{350,100,200,200}, // display circle in the middle of the screen
{600,100,200,200} }; // display circle in the right hand side of the screen
int rect[][] = { {100,100,200,200}, // display square in the left hand side of the screen
{350,100,200,200}, // display square in the middle of the screen
{600,100,200,200} }; // display square in the right hand side of the screen
// populate the two dimensional array - store the coordinates for the polygon shapes
int polyX[][] = { {150,250,300,250,150,100 }, // display polygon in the left hand side of the screen
{400,500,550,500,400,350 }, // display polygon in the middle of the screen
{650,750,800,750,650,600} }; // display polygon in the right hand side of the screen
int polyY[] = { 100,100,200,300,300,200 }; // the "Y" co-ordinates wont change for all three polygons
int xCoordinates[] = new int[ 6 ];
int pickAShape
, pickAColour
, polygonCount = 0
, circleCount = 0
, squareCount = 0
, redCount = 0
, greenCount = 0
, blueCount = 0
, yellowCount = 0 ;
for ( int position = 0;position < 3;position++ )
pickAShape = 1 + ( int )( Math.random() * 3 );
pickAColour = 10 + ( int )( Math.random() * 4 );
switch ( pickAShape )
case 1: // draw a circle
switch ( pickAColour )
case 10:
g.setColor( Color.red );
redCount++;
break;
case 11:
g.setColor( Color.green );
greenCount++;
break;
case 12:
g.setColor( Color.blue );
blueCount++;
break;
case 13:
g.setColor( Color.yellow );
yellowCount++;
break;
g.fillOval( circle[position][0],circle[position][1],circle[position][2],circle[position][3] );
circleCount++;
break;
case 2: // draw a rectangle
switch ( pickAColour )
case 10:
g.setColor( Color.red );
redCount++;
break;
case 11:
g.setColor( Color.green );
greenCount++;
break;
case 12:
g.setColor( Color.blue );
blueCount++;
break;
case 13:
g.setColor( Color.yellow );
yellowCount++;
break;
g.fillRect(rect[position][0],rect[position][1],rect[position][2],rect[position][3] );
squareCount++;
break;
case 3: // draw a polygon
switch ( pickAColour )
case 10:
g.setColor( Color.red );
redCount++;
break;
case 11:
g.setColor( Color.green );
greenCount++;
break;
case 12:
g.setColor( Color.blue );
blueCount++;
break;
case 13:
g.setColor( Color.yellow );
yellowCount++;
break;
xCoordinates[0]=polyX[position][0];
xCoordinates[1]=polyX[position][1];
xCoordinates[2]=polyX[position][2];
xCoordinates[3]=polyX[position][3];
xCoordinates[4]=polyX[position][4];
xCoordinates[5]=polyX[position][5];
Polygon polygonInstance = new Polygon ( xCoordinates, polyY, 6 );
g.fillPolygon( polygonInstance );
polygonCount++;
break;
// display the results
setFont(new Font("Serif",Font.BOLD,24));
g.setColor(Color.black);
if ((circleCount ==3 || squareCount ==3 || polygonCount==3) && (redCount ==3 || greenCount ==3 || blueCount==3 || yellowCount ==3))
g.drawString( "YOU WIN !!!!" ,380,400 );
else
g.drawString( "YOU LOSE !!!!",380,400 );
} // end method paint
} // end class stage4
=========================================
Regards and thanksO.K. You will not believe this, but the problem will be solved if you change the following line from:
setFont(new Font("Serif",Font.BOLD,24));to:
g.setFont(new Font("Serif",Font.BOLD,24));Now, since I am also learning JAVA, the way I went about solving was to create your applet from scratch, using cut and paste, and running it piece by piece till I ran into the flashing display. Took me a while. I am enclosing my version of the program for your comments.
import java.awt.*;
import java.applet.*;
public class Slotto extends Applet {
int circle[][] = { {100,100,200,200}, // circle in the left hand side of the screen
{350,100,200,200}, // circle in the middle of the screen
{600,100,200,200} }; // circle in the right hand side of the screen
int rect[][] = { {100,100,200,200}, // square in the left hand side of the screen
{350,100,200,200}, // square in the middle of the screen
{600,100,200,200} }; // square in the right hand side of the screen
int polyX[][] = { {150,250,300,250,150,100 }, // polygon in the left hand side of the screen
{400,500,550,500,400,350 }, // polygon in the middle of the screen
{650,750,800,750,650,600} }; // polygon in the right hand side of the screen
int polyY[] = { 100,100,200,300,300,200 }; // the "Y" co-ordinates wont change for all three polygons
int xCoordinates[] = new int[ 6 ];
int pickAShape
, pickAColour
, polygonCount = 0
, circleCount = 0
, squareCount = 0
, redCount = 0
, greenCount = 0
, blueCount = 0
, yellowCount = 0
, position ;
public void paint(Graphics g) {
for (position = 0; position < 3; position++) {
chooseColor(g);
drawTheShape(g);
declareResults(g);
public void chooseColor(Graphics g) {
pickAColour = 10 + ( int )( Math.random() * 4 );
switch ( pickAColour )
case 10:
g.setColor( Color.red );
redCount++;
break;
case 11:
g.setColor( Color.green );
greenCount++;
break;
case 12:
g.setColor( Color.blue );
blueCount++;
break;
case 13:
g.setColor( Color.yellow );
yellowCount++;
break;
public void drawTheShape(Graphics g) {
pickAShape = 1 + ( int )( Math.random() * 3 );
switch ( pickAShape )
case 1: // draw a Circle
g.fillOval( circle[position][0],
circle[position][1],
circle[position][2],
circle[position][3] );
circleCount++;
break;
case 2: // draw a Square
g.fillRect(rect[position][0],
rect[position][1],
rect[position][2],
rect[position][3] );
squareCount++;
break;
case 3: // draw a Polygon
xCoordinates[0]=polyX[position][0];
xCoordinates[1]=polyX[position][1];
xCoordinates[2]=polyX[position][2];
xCoordinates[3]=polyX[position][3];
xCoordinates[4]=polyX[position][4];
xCoordinates[5]=polyX[position][5];
Polygon polygonInstance = new Polygon ( xCoordinates,
polyY, 6 );
g.fillPolygon( polygonInstance );
polygonCount++;
break;
public void declareResults(Graphics g) {
g.setFont(new Font("Serif",Font.BOLD,24));
g.setColor(Color.black);
if ((circleCount ==3 || squareCount ==3 || polygonCount==3)
&& (redCount ==3 || greenCount ==3 || blueCount==3 || yellowCount ==3))
g.drawString( "YOU WIN !!!!" ,380,400 );
else
g.drawString( "YOU LOSE !!!!",380,400 );
}Regards. -
I have a big problem. Every time i lock on for example Facebook, the picture is big in 2 secundes and the it's gets small. Please help me.
<Email Edited by Host>Hi Frank,
Which Browser, & do you have a screenshot of the problem?
Maybe you are looking for
-
How to zoom in with Adobe Flash Player 12.0.0.77
I like to play a game on Neopets called Destruct-O-Match. Until two days ago, I could zoom in on the game (make it bigger) by right clicking with my mouse. Now that option no longer exists, so the game is too small to see comfortably. How do I zoo
-
1) Is the Current DNG 5.5 only useable in CS4? 2) I notice that support for cameras is shown for both RAW and DNG. Since DNG is supposed to be universal, what is the down side of using DNG to run raw files from cameras such as the Canon 7D? Should I
-
Blocking protocols with pix version 7.2.1
somebody knows like blocking protocols like skype with pix version 7.2.1. i know msn messenger or yahoo messenger can be blocked. but I need to blocked things like skype. thanks.
-
Cannot disable Skype federation by policy
Hello, All users are able to federate with Lync and Skype :-) However some users must be prevented from federation - Lync,AOL,Skype. I have created a new CsExternalAccessPolicy: Identity : Tag:FederationDisabled Description
-
Faux column background not aligned in smaller browser window...
I'm working on a three-column webpage. I'm using fixed-width columns, with the left and right columns floated (started with a dreamweaver layout). I am also using a background applied to the <body> tag to apply the faux column look, so that the sid