Help me in info abt tools -- ReqPro, Clear Case, Clear Quest, Remedy...

Please help me with the links and details to find complete information of tools (ReqPro, Clear Case, Clear Quest, Remedy.) which are used for tools used for Application Development and Maintenance process on internet as soon as possible.
plzzz....

Similar Messages

I'm following Firefox Help for Windows XP on "clear cookies & cache." When I open Firefox & follow the Help steps (click on History, Tools, etc.) these aren't active links. I'm clicking on a Help display; no actions are executed. ???

(On desktop PC) When I open Firefox & follow the Help steps (click on History, Tools, etc.), these aren't active links. I'm clicking on a Help display; no actions are executed. Cookies & cache aren't cleared.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"

Where can i get info abt deadlocks

Hi ,
I want to get some info abt dead locks and when it happen.I have one scenario where 4-5 process writing to the same table at the same time.I want to find out how the process is gng to effect if i ncrease parallel processes.
Thanks
Anand

Based on the above mentioned commands, it looks like it's just going to block the rows forever. Try the following
1)Open two sessions of SQL Plus. Let's call them S1 and S2
2)Run the following using S1
CREATE TABLE DTEST (ID INT,NAME VARCHAR2(400));
INSERT INTO DTEST (ID,NAME) VALUES (1,'NAME1');
INSERT INTO DTEST (ID,NAME) VALUES (2,'NAME2');
COMMIT;
And then these
S1: UPDATE DTEST SET NAME='NAME3' WHERE ID = 1;
S2 : UPDATE DTEST SET NAME='NAME4' WHERE ID = 2;
S1: UPDATE DTEST SET NAME='NAME4' WHERE ID = 2;
S2: UPDATE DTEST SET NAME='NAME3' WHERE ID = 1;
(While running the above mentioned commands,
DBA_BLOCKERS, DBA_WAITERS views can be used to view the locks being held ofcourse
by using separate sessions than the above mentioned ones)
A deadlock will occur with the following error message
ERROR at line 1:
ORA-00060: deadlock detected while waiting for resource
Hope this helps
Regards

Please help me with the paint tool!

Sorry for all the simple questions, but I'm having so many problems with Flash's drawing tools it isn't funny.
What I want to do is draw a series of slightly diagonal stripes. In any other program, I'd use the line tool to draw the partitions and then use the fill tool to fill in the gaps. But in Flash, the paint tool won't do anything. It doesn't matter where I click - it won't work, and a little 'lock' symbol appears on my cursor.
I know that an alternative way of drawing the stripes is to make a square, resize it and tilt it to exactly the right angle, but this is a slow and painstaking method, and I have to do a lot of them. Also, not all the stripes are perfectly straight.
It's so frustrating, because I could do this in ten seconds with normal drawing tools, and I've spent about four hours already just trying to figure out this stupid little thing (because this stupid little thing is crucial to my project!). I'd be immensely grateful for any help. Likewise, I'd be very grateful for any help figuring out the brush tool problem on my other post. No matter how much I try and practice, I just can't figure out these drawing tools.

I am having sort of the same problem but yours I think I can solve... is the layer locked at all?
I can't fill in any drawing or shape that I draw out and it's a pain... Was wondering if this was similar to yours??

Why wont google chrome let me play you tube videos as all I get is a black scfeen with no control iocons??? ps help I've but made n o diff. tried clearing cashe's and browsing data but made no diff grrr

why wont google chrome let me play you tube videos as all I get is a black scfeen with no control iocons??? ps help I've but made n o diff. tried clearing cashe's and browsing data but made no diff grrr

    Check whether you are currently in YouTube HTML 5 trial?
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box for
   "You are currently in the HTML5 trial".

How to implement 'Context Sensitive Help' for Workforce Performance Build Tool.

Hi Gurus,
We have a requirement to implement ‘Context Sensitive Help’ for Workforce Performance Build Tool. Please let me know how to go about implementing the "Context Sensitive Help".
It will be great if you can share some links to the documents and screenshots.
Thanks,
Sanjiv Karmakar

Hi Sanjiv,
do you you mean expand the Help Menu => Pull Help or do you mean
EPSS => push Help?
in case pull help please tell me exactly which system GUI or EP and version you are using.
many different scenarios are possible.
Tom
P.S. Please take care of the name is Workforce Performance Builder or maybe in-official WPB.
many people ask in the HCM area for help, this is the reason why we do not observe all discussion.
The name in the title will help us to find your questions on time.

Run Clear Case command from java and save the out put in to a file.

Can any one help me out ...
I want to execute Clear case command from a java and want to save the out put of this command to a file.
I am naot able to find out how to start..
Message was edited by:
chandra_verma

http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

How to Clear Not Cleared Billing Docs

Hello Everyone,
Could you help us regarding this matter. Billing was not cleared in the Accounting Document Flow.
Thanks po!

Hi,
Check this BAPI
BAPI_BILLINGDOC_CANCEL1
Regards,
Satish

Oracle workshop 10GR3 Problem while working from rational clear case.

Hi,
I am continuously getting the below pop up windows when working in oracle workshop mainly connecting to rational clear case and working with the clear case projects directly from workshop, this is the approach we are asked to follow, but the workshop is getting closed after these pop up's. Could you please tell me what the problem is here.
The pop up message is like this:
The exception unknown software exception (0xccccdead) occurred in the application at location 0x7c812afb.
JVM terminated Exit Code=-858988883
this is my workshop.ini default setings, is there any change s required.
-vm
D:/bea/jrockit_160_05/jre/bin/javaw.exe
-startup
D:/bea/tools/eclipse_pkgs/2.0/eclipse_3.3.2/eclipse/plugins/org.eclipse.equinox.launcher_1.0.1.R33x_v20080118awtswtbridge.jar
--launcher.library
D:/bea/tools/eclipse_pkgs/2.0/eclipse_3.3.2/eclipse/plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.0.3.R33x_v20080118
-vmargs
-Xms384m
-Xmx768m
-XX:MaxPermSize=256m
-XX:PermSize=192m
-XX:NewRatio=3
-Xss256k
-DprodMode=production
-Dweblogic.home=D:/bea/wlserver_10.3
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dnitrox.boot.jar=file:D:/bea/workshop_10.3/nitrox-boot.jar
-Dosgi.install.area=D:/bea/tools/eclipse_pkgs/2.0/eclipse_3.3.2/eclipse
-Dosgi.instance.area.default=D:/bea/user_projects/workspaces/default
-Dosgi.configuration.area=D:/bea/workshop_10.3/workshop4WP/eclipse/configuration
-Declipse.product=com.bea.workshop.product.workshop
-Dosgi.splashPath=file:D:/bea/workshop_10.3/workshop4WP/eclipse/plugins/com.bea.workshop.product
Please suggest..

Hi
Are you getting the output or not?
You can just ignore this warning in EPC
as this FORM USER_COMMAND is always called indirectly only
But check the Output and see?
<b>Reward points for useful Answers</b>
Regards
Anji

NFS Errors on Solaris 2.6 and 7 Systems running as a clear case client

I read in a Rational Document that When Sun fixed defect #4271267 they introduced a problem that causes EAGAIN to be returned to fsync() andclose() system calls. The EAGAIN defect is being tracked by Sun as defect #4349744 and it is a problem for NFS clients running Solaris2.6, 7, and 8.
Sun has released a patch for this on Solaris 8(108727-06 or later). Does anyone know, What are the Patches(Patch ID Numbers)to be installed on Solaris 2.6 and Solaris 7 Systems for the Problem when ClearCase Views or Vobs are on NetAPP with Solaris servers.
I am getting NFS errors and I am not able to view the files, when I try accessing the Vobs from Solaris 2.6,7 systems. The Clear Case Server is on Solaris 8 and the VOBs are stored in Netapp Filer.
TIA
Regards
Saravanan.C.S

Hello:
I have the same problem with an only Adaptec AHA-2940, but it is bigger....i can't install Solaris with this problem.
I am sure that it isn't hardware problem becouse i have 3 IBM PC Servers 315 and i have the same problem with all them.
Some help would be very grateful.
Hello,
I have an intel box running Solaris 2.6 with Oracle
8.i.
There are 2 SCSI cards. The first one has the
following devices. [0 = Seagate 9.5gig drive] [4 =
Seagate tape drive] [6 = TEAC cdrom] [7 = adaptec 2940
SCSI card].
The Second has the following devices. [0 = Seagate
9.5gig drive] [1 = Seagate 9.5gig drive] [7 = Adaptec
2040 SCSI card].
Solaris is partitioned as followed. 1 root drive. 1
/opt drive. And 1 /backup drive.
My problem is periodically we get Transport errors.
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: abort
request, target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: abort device,
target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: reset target,
target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: early
timeout, target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4/cmdk@1,0 (Disk8):
Dec 2 08:15:45 HAFC unix: SCSI transport failed:
reason 'incomplete': retrying command
Like this. When they come it is by the thousands.
Sometimes locking up the system. Many times the errors
indicate a disk and give a block error or two. If I
replace the disk. The problem usually goes away.
Sometimes replacing the cable clears the problem.
Sometimes this happens when there is no real activity
on the server. I have applied patch 111031-01 witch
was supposed to fix this problem. But it hasnt. Unless
I have bad hardware. Is it possible?

11" Speck case, Clear plastic or Black satin?

Im planning on buying a Speck case, but cant deicide if the Clear Case or Black Satin case is better.
I like the clear case, due to it not taking away the MBA looks, but the black case also looks nice, with the apple logo showing though the case when its on.
Im trying to get peoples views on each case and hopefully this will help me make up my mind

I have the black satin and I like it better than the clear case. The satin has a definite nice feel on it. The clear case feels like a cheap plastic case. The clear case is also easier to scratch and you can see the difference over a few weeks.
Visit your nearest (macbook) accessory store or apple store and you should be able to compare the two.

Differences between clear case 23' and new 23'

I am having a hard time finding the differences between the two monitors. my clear case 23' is about 2 years old.

Hi Matt,
First off, KEEP your older ADC display. They have much more natural color
and don't suffer from the pinkness and blue banding on the new Aluminum.
I have followed the discussions since August of last year and there is no
end to the color consistency complaints. In fact, Apple has deleted over 1000 messages regarding this. Why? Hmmm. They threw out a lot of helpful
hints that could have helped their customers.
I personally bought and returned 7 Alum Cinema 23 displays. Some from Apple, some from Fry's, and others from UCLA Apple store.
The case is a beautiful design but the interior is different than the old 23.
The new ones are brighter, more saturated in color and have 2 Firewire and
2 USB ports available.
However, they got rid of the system/start up power button and added a power brick with cables waving all over the place.
I hopoed they would have solved the production problem by now but it seems
that too few people are complaining ( graphic designers/video editors ).
I gave up and just bought a one year old Plastic 23 display for $1000.
I love it. The only thing I don't like is that the whites are a little yellowish
due to its lower brightness specs ( 230 nits vs. 270 nits on the new one.
The way to see the color issues with an Alum model is to set the desktop to
a neutral gray. Or, simply drag a small image of gray (perhaps open up the little gray jpg located in Library/Desktop Pictures/Solids) across the screen.
The left side will look a little pink and it will change to a blueish tone as you move to the right.
Or better yet, open the Apple display calibrator, look at the Apple icon and
move the window to the extreme left and right.
It is only visible clearly in these circumstances but most people don't care.
Considering the price drops it might be nice to get a new one but all I
know is all the motion graphics studios I work at use the old monitors.
It also is no coincidence that this past weekend Apple sold out of refurbished
Plastic Cinema 23 in 24 hrs, while the Alum refurbs just sat.
Take a look at the specials. They always have something good.
Good luck to you. Hopefully, I won't be deleted for voicing my opinions.
I'm a diehard Mac user and really this Alum 23 monitor is the first thing I
ever complained about.
Ken

Looking for a clear case that protects screen and click wheel

Hi,
I've got a new 8GB Nano. I'm looking for a case to protect it from general dings and scratches. What I'm looking for is a clear case with screen and click wheel protection. Anyone know where I can find one? So far, all I've been able to find are clear cases that protect the screen but leave the click wheel unprotected. Or is click wheel protection not that that big of a thing?
Thanks!

There don't seem to be many cases available yet for the new Nano. I ordered one from iSkins, a company in Canada. You can check their website.

Clear Cenvat clearing GL item through F-03

Hi..
After MIGO while excise is captured through J1IEX then Cenvat clearing GL become credit. And during MIRO Cenvat Clearing GL become debit. And last week company closed last financial year and carry forwarded to current year. Now I want to clear Cenvat Clearing GL open item through F-03. But at present through F-03 Cenvat clearing GL not able to clear items.
How I can clear items under Cenvat Clearing GL account through F-03 ?
With Regards,
Samrat

Hi
Try in F.13 to clear cenvat clearing GL.
Regards
Sandesh

Idea for rotating (side mount) 20" clear case Cinema?

I've got a 30" ACD as my main display, and an older 20" clear case Cinema that's on the sidelines now. Having both on my desk as-is seems a bit much.
http://www.blakespot.com/images/g53020.jpg
...but if I could somehow side-mount / rotate the 20" to portrait orientation, it might work. My ATI X1900 XT is capable of rotating the screen image (and, yes, I have a DVI-ADC converter). But how to mount?
Looking closely at the screen, it seems there's a symmetrical, white plastic enclosure INSIDE the outer, clear enclosure that contains the legs. Is it possible to get the inner part out, so that one could somehow mount it sideways without the legs all sticking out to the side?
Thanks.
blakespot

Looks like this device might work well to rotate a 20" plastic ACD.
http://www.lcdarms.com/products/LCDRadialArms/7506-1000.html
Too late for me, though. I already bought an HP LP2065 4:3 screen (1600x1200) and am using it in portrait orientation (it rotates) to sit aside my 30" ACD.
http://www.blakespot.com/list/images/macprohp_applelcd.jpg
blakespot

Help me in info abt tools -- ReqPro, Clear Case, Clear Quest, Remedy...

Similar Messages

Maybe you are looking for