Help me in Report(RDF) Performance tuning

Hi Viewers,
I need some steps related to report ( RDF) perfomance tune.
here is my following question.
(Q). A report for 100,000+ lines/records is taking 20 hours to run – what steps should be taken to resolve / tune
Thanks in advance.
new

Hello,
Have you followed the "tips" in the documents ?
Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2)
B14048-02
20 Tuning Oracle Reports
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_tune.htm
Regards

Similar Messages

Help request for Oracle DB Performance tuning

I need some help on Oracle performance tuning.
My environment is VB 6 frontend & Oracle 8
in backend.
The problem I am facing is particularly in
muli-user environment. Some query which takes
20 seconds to when there is only one user
working in the network, takes more time
(3 minutes to even 5 minutes) when there are
4-5 users working in the network.
What may be wrong ?
Are there any parameters that I can
fine tune ?
We checked the resource utilization at the
server level CPU utilization is max 50 %,
Memoery utilization is 50 % (250 MB out of available 512 KB)
null

Hi Vinay,
There can be many reasons for time delay.
Here are some--
1) You may not be releasing the locks on objects quickly after use.
This can be obtained by querying v$locked_object.
2) You may be holding many sessions concurrently and not closing the older ones.
This u can get by querying v$session.
These are some common problems in multi-user platform.
R u using MTS?
Yogesh.

Performance tuning from Basis point of View ?

Hi,
Can anybody help me in doing the performance tuning from Basis point of view.
What all parameters are involved in it and what are the values need to be initially assigned and what all factors need to be kept in mind.?
Thanks in advance.

wrong forum??
not a security related question??

RMAN backup performance tuning

Hi All,
We have oracle 9iR2 two nodes RAC on solaris 9, I am looking for some helpful material on RMAN backup performance tuning, though i went through oracle's official RMAN performance tuning guide, still if there is some really nice material please let me know!
TIA

Oracle Material is the best.
Anyway, the one given below is also a good P&T book.
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm
I am looking for some helpful material on RMAN backup performance tuningTip: Give a good value for large_pool_size buffer for a better RMAN performance. For RAC configure channels on multiple nodes for parallel backup process through RMAN,
CONFIGURE DEVICE TYPE sbt PARALLELISM 3;
CONFIGURE DEFAULT DEVICE TYPE TO sbt;
CONFIGURE CHANNEL 1 DEVICE TYPE sbt CONNECT 'usr1/pwd1@n1';
CONFIGURE CHANNEL 2 DEVICE TYPE sbt CONNECT 'usr2/pwd2@n2';
CONFIGURE CHANNEL 3 DEVICE TYPE sbt CONNECT 'usr3/pwd3@n3';
BACKUP DATABASE PLUS ARCHIVELOG DELETE INPUT;
[email protected]

How Modularization Technique imrpove performance tuning?

Can you please tell me that how a Modularization Technique can help us to do the performance tuning?
Regards,
Subhasish

Modularization makes the program more legible and readable. ie It's noting but building up Perform....FORMS for the execution of "lines of code" .
However it may effect your performance if you have not Modularized them properly. As a best practice and for better performance, sap code executes from top to bottom.
Then writing the FORM--ENDFORM in the beginning and making the PERFORM call from the bottom is not a best practice of writing code and that will effect the performance.
As a better practice to improve the performance, it is suggested to write the FORMS below and closest to the place from where it is called.
rgds,
TM.

Report running for long time & performance tuning

Hi All,
(1). WebI report is running for long time.so what are the steps i need to check for it ?
(2). Can you tell me about performance tuning in BO ?
please help me.....
Thanks
Kumar

(1). WebI report is running for long time.so what are the steps i need to check for it ?
The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
(2). Can you tell me about performance tuning in BO ?
I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
Regards,
Stratos

Need clear steps for doing performance tuning on SQL Server 2008 R2 (DB Engine, Reporting Services and Integration Services)

We have to inverstigate about a reporting solution where things are getting slow (may be material, database design, network matters).
I have red a lot in MSDN and some books about performance tuning on SQL Server 2008 R2 (or other) but frankly, I feel a little lost in all that stuff
I'am looking for practical steps in order to do the tuning. Someone had like a recipe for that : a success story...
My (brain storm) Methodology should follow these steps:
Resource bottlenecks: CPU, memory, and I/O bottlenecks
tempdb bottlenecks
A slow-running user query : Missing indexes, statistics,...
Use performance counters : there are many, can one give us the list of the most important
how to do fine tuning about SQL Server configuration
SSRS, SSIS configuration ?
And do the recommandations.
Thanks
"there is no Royal Road to Mathematics, in other words, that I have only a very small head and must live with it..."
Edsger W. Dijkstra

Hello,
There is no clear defined step which can be categorized as step by step to performance tuning.Your first goal is to find out cause or drill down to factor causing slowness of SQL server it can be poorly written query ,missing indexes,outdated stats.RAM crunch
CPU crunch so on and so forth.
I generally refer to below doc for SQL server tuning
http://technet.microsoft.com/en-us/library/dd672789(v=sql.100).aspx
For SSIS tuning i refer below doc.
http://technet.microsoft.com/library/Cc966529#ECAA
http://msdn.microsoft.com/en-us/library/ms137622(v=sql.105).aspx
When I face issue i generally look at wait stats ,wait stats give you idea about on what resource query was waiting.
--By Jonathan KehayiasSELECT TOP 10
wait_type ,
max_wait_time_ms wait_time_ms ,
signal_wait_time_ms ,
wait_time_ms - signal_wait_time_ms AS resource_wait_time_ms ,
100.0 * wait_time_ms / SUM(wait_time_ms) OVER ( )
AS percent_total_waits ,
100.0 * signal_wait_time_ms / SUM(signal_wait_time_ms) OVER ( )
AS percent_total_signal_waits ,
100.0 * ( wait_time_ms - signal_wait_time_ms )
/ SUM(wait_time_ms) OVER ( ) AS percent_total_resource_waits
FROM sys.dm_os_wait_stats
WHERE wait_time_ms > 0 -- remove zero wait_time
AND wait_type NOT IN -- filter out additional irrelevant waits
( 'SLEEP_TASK', 'BROKER_TASK_STOP', 'BROKER_TO_FLUSH',
'SQLTRACE_BUFFER_FLUSH','CLR_AUTO_EVENT', 'CLR_MANUAL_EVENT',
'LAZYWRITER_SLEEP', 'SLEEP_SYSTEMTASK', 'SLEEP_BPOOL_FLUSH',
'BROKER_EVENTHANDLER', 'XE_DISPATCHER_WAIT', 'FT_IFTSHC_MUTEX',
'CHECKPOINT_QUEUE', 'FT_IFTS_SCHEDULER_IDLE_WAIT',
'BROKER_TRANSMITTER', 'FT_IFTSHC_MUTEX', 'KSOURCE_WAKEUP',
'LAZYWRITER_SLEEP', 'LOGMGR_QUEUE', 'ONDEMAND_TASK_QUEUE',
'REQUEST_FOR_DEADLOCK_SEARCH', 'XE_TIMER_EVENT', 'BAD_PAGE_PROCESS',
'DBMIRROR_EVENTS_QUEUE', 'BROKER_RECEIVE_WAITFOR',
'PREEMPTIVE_OS_GETPROCADDRESS', 'PREEMPTIVE_OS_AUTHENTICATIONOPS',
'WAITFOR', 'DISPATCHER_QUEUE_SEMAPHORE', 'XE_DISPATCHER_JOIN',
'RESOURCE_QUEUE' )
ORDER BY wait_time_ms DESC
use below link to analyze wait stats
http://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/
HTH
PS: for reporting services you can post in SSRS forum
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Performance Tuning for OBIEE Reports

Hi Experts,
I had a requirement for which i have to end up building a snowflakt model in Physical layer i.e. One Dimension table with Three snowflake tables(Materialized views).
The key point is the Dimension table is used in most of the OOTB reports.
so all the reports use other three snowflakes tables in the Join conditions due to which the reports take longer time than ever like 10 mints.
can anyone suggest good performance tuning tips to tune the reports.
i created some indices on Materialized view columns and and on dimension table columns.
i created the Materialized views with cache Enabled and refreshes only once in 24 hours etc
is there anything i have to improve performance or have to consider re-designing the Physical layer without snowflake
Please Provide valuable suggestions and comments
Thank You
Kumar

Kumar,
Most of the Performance Tuning should be done at the Back End , So calculate all the aggregates in the Repository it self and Create a Fast Refresh for MV and you can also do one thing you can schedule an IBOT to run the report every 1 hour or some thing so that the report data will be cached and when the user runs the report the BI Server extracts the data from Cache
Hope that helps
~Srix

Performance Tuning of webi report BO4.0

Hi ,
I have report which has two data providers in 1st Data Provider i have 10 objects and in 2nd Data provider i have 3 objects the issue is performance report is taking 6 minutes to run.
Please help me out how we can increase the performance at Query Level.
Thanks
Siva

Hi
There are various levels to which you have to check to improve the performance of reports could be at connection levels, query, database etc.
some of them you can try
1. check array fetch size in relational connection parameters, deactivating array fetch size can increase the efficiency of retrieving your data, but slows server performance.
2. Setting options for the default list of values in business layer and data foundation layer
Automatic refresh - If this is selected, the list of values is automatically refreshed each time the
list is called. This can have an effect on performance each time the list of values is refreshed. You should disable this option if the list of values returns a large number of values.
3. set query stripping (Optimize query with Query Stripping in Web Intelligence - Business Intelligence (BusinessObjects) - SCN Wiki)
4. also check Performance Tuning Methods in BO
Regards,
Raghava

Performance Tuning for Concurrent Reports

Hi,
Can you help me with Performance Tuning for Concurrent Reports/Requests ?
It was running fine but suddenly running slow.
Request Name : Participation Process: Compensation program

What is your application release?
Please see if (Performance Issues With Participation Process: Compensation Workbench [ID 389979.1]) is applicable.
To enable trace/debug, please see (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1] -- 5. How does one enable trace for a concurrent program INCLUDING bind variables and waits?).
Thanks,
Hussein

Performance tuning of this report

Hello friends iam attaching my report give the performance tuning for this report to avoid nested endloops. how to do without using nested endloops.
give me the reply urgent.
REPORT ZDEMO9          NO STANDARD PAGE HEADING
                        LINE-SIZE 250
                        LINE-COUNT 22(3).                             .
            TABLES DECLARATION                    *
TABLES : MARA,              "general material data
         MAKT,              "material description
         MARC,              "plant data for material
         VBAP,              "sales document for item data
         EKKO,              "purchasing document header
         EKPO,              "purchasing document item
         KNA1.              "customer master details
            INTERNAL TABLE DECLARATION             *
DATA : BEGIN OF T_MARA OCCURS 0,
       MATNR LIKE MARA-MATNR,
       MTART LIKE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       END OF T_MARA.
DATA : BEGIN OF T_MAKT OCCURS 0,
       MATNR LIKE MAKT-MATNR,
       MAKTX LIKE MAKT-MAKTX,
       SPRAS LIKE MAKT-SPRAS,
       END OF T_MAKT.
DATA : BEGIN OF T_MARC OCCURS 0,
       MATNR LIKE MARC-MATNR,
       WERKS LIKE MARC-WERKS,
       END OF T_MARC.
DATA : BEGIN OF T_KNA1 OCCURS 0,
       KUNNR LIKE KNA1-KUNNR,
       NAME1 LIKE KNA1-NAME1,
       LAND1 LIKE KNA1-LAND1,
       END OF T_KNA1.
DATA : BEGIN OF T_VBAP OCCURS 0,
       MATNR LIKE VBAP-MATNR,
       POSNR LIKE VBAP-POSNR,
       MATKL LIKE VBAP-MATKL,
       VBELN LIKE VBAP-VBELN,
       END OF T_VBAP.
DATA : BEGIN OF T_EKPO OCCURS 0,
       EBELN LIKE EKPO-EBELN,
       EBELP LIKE EKPO-EBELP,
       BUKRS LIKE EKPO-BUKRS,
       WERKS LIKE EKPO-WERKS,
       LGORT LIKE EKPO-LGORT,
       MATNR LIKE EKPO-MATNR,
       MANDT LIKE EKPO-MANDT,
       END OF T_EKPO.
                 FINAL INTERNAL TABLE                *
DATA : BEGIN OF T_FINAL OCCURS 0,
       MATNR LIKE MARA-MATNR,
       MTART LIKE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       WERKS LIKE MARC-WERKS,
       MAKTX LIKE MAKT-MAKTX,
       SPRAS LIKE MAKT-SPRAS,
       VBELN LIKE VBAP-VBELN,
       POSNR LIKE VBAP-POSNR,
       MATKL LIKE VBAP-MATKL,
       EBELN LIKE EKPO-EBELN,
       EBELP LIKE EKPO-EBELP,
       BUKRS LIKE EKPO-BUKRS,
       KUNNR LIKE KNA1-KUNNR,
       LAND1 LIKE KNA1-LAND1,
       NAME1 LIKE KNA1-NAME1,
       LGORT LIKE EKPO-LGORT,
       END OF T_FINAL.
*DATA: BEGIN OF V_matnr OCCURS 0,
       matnr LIKE mara-matnr,
     END OF t_matnr.
data:
      a(32) type c.
a = 'IBT000000000000000001000000000000000050'.
                   SELECTION SCREEN                         *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_BUKRS FOR EKPO-BUKRS,
                 S_KUNNR FOR KNA1-KUNNR,
                 S_WERKS FOR MARC-WERKS,
                 S_MATNR FOR MARA-MATNR obligatory.
SELECTION-SCREEN END OF BLOCK B1.
                 START OF SELECTION                           *
START-OF-SELECTION.
SELECT MATNR mtart meins
          FROM MARA
          INTO CORRESPONDING FIELDS OF TABLE T_MARA
          WHERE MATNR IN S_MATNR.
SELECT MATNR WERKS
          FROM MARC
          INTO CORRESPONDING FIELDS OF TABLE T_MARC
          FOR ALL ENTRIES IN T_MARA
          WHERE MATNR = T_MARA-MATNR
          and werks in s_werks.
select matnr maktx spras
        from makt
        into corresponding fields of table t_makt
        for all entries in t_mara
        where matnr = t_mara-matnr
        and spras = sy-langu.
select matnr posnr matkl vbeln
         from vbap
         into corresponding fields of table t_vbap
         for all entries in t_mara
         where matnr = t_mara-matnr.
select matnr werks bukrs ebeln ebelp lgort
         from ekpo
         into corresponding fields of table t_ekpo
         for all entries in t_mara
         where matnr = t_mara-matnr
         and werks in s_werks.
LOOP AT T_MARA.
    MOVE T_MARA-matnr TO T_FINAL-matnr.
    move t_mara-mtart to t_final-mtart.
    move t_mara-meins to t_final-meins.
    loop at t_marc where matnr eq t_mara-matnr.
      move t_marc-werks to t_final-werks.
      loop at t_makt.
        move t_makt-maktx to t_final-maktx.
        move t_makt-spras to t_final-spras.
        loop at t_vbap.
          move t_vbap-posnr to t_final-posnr.
          move t_vbap-matkl to t_final-matkl.
          move t_vbap-vbeln to t_final-vbeln.
        loop at t_ekpo.
        move t_ekpo-bukrs to t_final-bukrs.
        move t_ekpo-ebeln to t_final-ebeln.
        move t_ekpo-ebelp to t_final-ebelp.
        move t_ekpo-lgort to t_final-lgort.
          append t_final.
        endloop.
      endloop.
    endloop.
endloop.
endloop.
SELECT werks KUNNR LAND1 NAME1
INTO CORRESPONDING FIELDS OF TABLE T_KNA1
FROM KNA1.
WHERE WERKS in s_werks.
loop at t_kna1.
    move t_kna1-kunnr to t_final-kunnr.
    move t_kna1-name1 to t_final-name1.
    move t_kna1-land1 to t_final-land1.
    append t_final.
endloop.
"endloop.
loop at t_final.
    write :   4 t_final-matnr,
             20 t_final-mtart,
             28 t_final-meins,
             46 t_final-werks,
             58 t_final-maktx,
             71 t_final-spras,
             78 t_final-posnr,
            100 t_final-matkl,
            115 t_final-vbeln,
            130 t_final-kunnr,
            142 t_final-name1,
            156 t_final-land1,
            168 t_final-bukrs,
            190 t_final-ebeln,
            205 t_final-ebelp,
            208 t_final-lgort.
endloop.
              TOP-OF-PAGE                       *
top-of-page.
uline.
write : /60 'G E N E R A L   D E T A I L S' COLOR 2 INVERSE OFF.
ULINE.
write :/ SY-VLINE,    'MATERIAL'       COLOR 4, "12 SY-VLINE,
        13 SY-VLINE,    'IND SECTOR',
        28 SY-VLINE,    'UNITS',
        43 SY-VLINE,    'PLANT',
        55 SY-VLINE,    'MAT DESC',
        68 SY-VLINE,    'LANGU',
        70 SY-VLINE,    'SALES DOC ITEM',
        95 SY-VLINE,    'MAT GROUP',
       110 SY-VLINE,    'SALES DOC',
       125 SY-VLINE,    'CUST ID',
       140 SY-VLINE,    'NAME',
       155 SY-VLINE,    'COUNTRY',
       165 sy-vline,    'company code',
       205 sy-vline,    'storge loc'.

*& Report YTESTCHA                                                    *
REPORT ytestcha NO STANDARD PAGE HEADING
LINE-SIZE 250
LINE-COUNT 22(3). .
TABLES DECLARATION *
TABLES : mara, "general material data
makt, "material description
marc, "plant data for material
vbap, "sales document for item data
ekko, "purchasing document header
ekpo, "purchasing document item
kna1. "customer master details
INTERNAL TABLE DECLARATION *
*DECLARE TYPES FIRST AND THE INTERNAL TABLES
*DONT USE MATNR LIKE MARA-MATNR ,INSTEAD USE MARA TYPE MATNR WHERE MATNR
*IS THE DATA ELEMENT FOR FIELD MATNR.
TYPES: BEGIN OF ty_mara,
         matnr TYPE matnr,
         mtart TYPE mtart,
         meins TYPE meins,
         kunnr TYPE wettb,
       END OF ty_mara.
TYPES: BEGIN OF ty_makt,
        matnr TYPE matnr,
        maktx TYPE maktx,
        spras TYPE spras,
       END OF ty_makt.
TYPES: BEGIN OF ty_marc,
        matnr TYPE matnr,
        werks TYPE werks_d,
        END OF ty_marc.
TYPES : BEGIN OF ty_kna1,
          kunnr TYPE kunnr,
          name1 TYPE name1_gp,
          land1 TYPE land1_gp,
          END OF ty_kna1.
TYPES: BEGIN OF ty_vbap,
         matnr TYPE matnr,
         posnr TYPE posnr_va,
         matkl TYPE matkl,
         vbeln TYPE vbeln_va,
         END OF ty_vbap.
TYPES: BEGIN OF ty_ekpo,
         ebeln TYPE ebeln,
         ebelp TYPE ebelp,
         bukrs TYPE bukrs,
         werks TYPE werks_d,
         lgort TYPE lgort_d,
         matnr TYPE matnr,
         mandt TYPE mandt,
        END OF ty_ekpo.
DATA:t_mara TYPE TABLE OF ty_mara WITH HEADER LINE,
     t_makt TYPE TABLE OF ty_makt WITH HEADER LINE,
     t_marc TYPE TABLE OF ty_marc WITH HEADER LINE,
     t_kna1 TYPE TABLE OF ty_kna1 WITH HEADER LINE,
     t_vbap TYPE TABLE OF ty_vbap WITH HEADER LINE,
     t_ekpo TYPE TABLE OF ty_ekpo WITH HEADER LINE.
FINAL INTERNAL TABLE *
TYPES: BEGIN OF ty_final,
     matnr TYPE matnr,
     mtart TYPE mtart,
     meins TYPE meins,
     werks TYPE werks_d,
     maktx TYPE maktx,
     spras TYPE spras,
     vbeln TYPE vbeln_va,
     posnr TYPE posnr_va,
     matkl TYPE matkl,
     ebeln TYPE ebeln,
     ebelp TYPE ebelp,
     bukrs TYPE bukrs,
     kunnr TYPE kunnr,
     land1 TYPE land1_gp,
     name1 TYPE name1_gp,
     lgort TYPE lgort_d,
     END OF ty_final.
DATA : t_final TYPE TABLE OF ty_final WITH HEADER LINE.
*DATA: BEGIN OF V_matnr OCCURS 0,
matnr LIKE mara-matnr,
END OF t_matnr.
DATA:
a(32) TYPE c.
a = 'IBT000000000000000001000000000000000050'.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_bukrs FOR ekpo-bukrs,
                 s_kunnr FOR kna1-kunnr,
                 s_werks FOR marc-werks,
                 s_matnr FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
START OF SELECTION *
START-OF-SELECTION.
*USE SUBROUTINES
*get data
PERFORM get_data.
*populate final table
PERFORM populate_final_table.
END-OF-SELECTION.
*display output
PERFORM display_output.
TOP-OF-PAGE *
TOP-OF-PAGE.
ULINE.
WRITE : /60 'G E N E R A L D E T A I L S' COLOR 2 INVERSE OFF.
ULINE.
WRITE :/ sy-vline, 'MATERIAL' COLOR 4, "12 SY-VLINE,
13 sy-vline, 'IND SECTOR',
28 sy-vline, 'UNITS',
43 sy-vline, 'PLANT',
55 sy-vline, 'MAT DESC',
68 sy-vline, 'LANGU',
70 sy-vline, 'SALES DOC ITEM',
95 sy-vline, 'MAT GROUP',
110 sy-vline, 'SALES DOC',
125 sy-vline, 'CUST ID',
140 sy-vline, 'NAME',
155 sy-vline, 'COUNTRY',
165 sy-vline, 'company code',
205 sy-vline, 'storge loc'.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
*TRY TO CLEAR AND REFRESH TABLES BEFORE SELECT
FORM get_data .
CLEAR t_mara.
REFRESH t_mara.
SELECT matnr
         mtart
         meins
         kunnr
         FROM mara
         INTO TABLE t_mara
         WHERE matnr IN s_matnr.
IF NOT t_mara[] IS INITIAL.
    CLEAR t_marc.
    REFRESH t_marc.
    SELECT matnr
           werks
           FROM marc
           INTO TABLE t_marc
           FOR ALL ENTRIES IN t_mara
           WHERE matnr = t_mara-matnr
                 AND werks IN s_werks.
    CLEAR t_makt.
    REFRESH t_makt.
    SELECT matnr
           maktx
           spras
           FROM makt
           INTO TABLE t_makt
           FOR ALL ENTRIES IN t_mara
           WHERE matnr = t_mara-matnr
           AND spras = sy-langu.
    CLEAR t_vbap.
    REFRESH t_vbap.
    SELECT matnr
           posnr
           matkl
           vbeln
           FROM vbap
           INTO TABLE t_vbap
           FOR ALL ENTRIES IN t_mara
           WHERE matnr = t_mara-matnr.
    CLEAR t_ekpo.
    REFRESH t_ekpo.
    SELECT ebeln
           ebelp
           bukrs
           werks
           lgort
           matnr
           mandt
           FROM ekpo
           INTO TABLE t_ekpo
           FOR ALL ENTRIES IN t_mara
           WHERE matnr = t_mara-matnr
           AND werks IN s_werks.
ENDIF.
CLEAR t_kna1.
REFRESH t_kna1.
SELECT kunnr
         land1
         name1
         INTO TABLE t_kna1
         FROM kna1.
WHERE WERKS in s_werks.
ENDFORM.                    " GET_DATA
*&      Form POPULATE_FINAL_TABLE
      text
--> p1        text
<-- p2        text
FORM populate_final_table .
*AVOID LOOPS AND TRY TO USE READ
CLEAR t_final.
REFRESH t_final.
LOOP AT t_mara.
    MOVE t_mara-matnr TO t_final-matnr.
    MOVE t_mara-mtart TO t_final-mtart.
    MOVE t_mara-meins TO t_final-meins.
    READ TABLE t_marc WITH KEY matnr = t_mara-matnr.
    MOVE t_marc-werks TO t_final-werks.
    READ TABLE t_makt WITH KEY matnr = t_mara-matnr.
    MOVE t_makt-maktx TO t_final-maktx.
    MOVE t_makt-spras TO t_final-spras.
    READ TABLE t_vbap WITH KEY matnr = t_mara-matnr.
    MOVE t_vbap-posnr TO t_final-posnr.
    MOVE t_vbap-matkl TO t_final-matkl.
    MOVE t_vbap-vbeln TO t_final-vbeln.
    READ TABLE t_ekpo WITH KEY matnr = t_mara-matnr.
    MOVE t_ekpo-bukrs TO t_final-bukrs.
    MOVE t_ekpo-ebeln TO t_final-ebeln.
    MOVE t_ekpo-ebelp TO t_final-ebelp.
    MOVE t_ekpo-lgort TO t_final-lgort.
    READ TABLE t_kna1 WITH KEY kunnr = t_mara-kunnr.
    MOVE t_kna1-kunnr TO t_final-kunnr.
    MOVE t_kna1-name1 TO t_final-name1.
    MOVE t_kna1-land1 TO t_final-land1.
    APPEND t_final.
    CLEAR :t_final,t_mara,t_marc,t_makt,t_ekpo,t_vbap.
ENDLOOP.
ENDFORM.                    " POPULATE_FINAL_TABLE
*&      Form DISPLAY_OUTPUT
      text
--> p1        text
<-- p2        text
FORM display_output .
LOOP AT t_final.
    WRITE : 4 t_final-matnr,
    20 t_final-mtart,
    28 t_final-meins,
    46 t_final-werks,
    58 t_final-maktx,
    71 t_final-spras,
    78 t_final-posnr,
    100 t_final-matkl,
    115 t_final-vbeln,
    130 t_final-kunnr,
    142 t_final-name1,
    156 t_final-land1,
    168 t_final-bukrs,
    190 t_final-ebeln,
    205 t_final-ebelp,
    208 t_final-lgort.
ENDLOOP.
ENDFORM.                    " DISPLAY_OUTPUT

Need help in Performance tuning for function...

Hi all,
I am using the below algorithm for calculating the Luhn Alogorithm to calculate the 15th luhn digit for an IMEI (Phone Sim Card).
But the below function is taking about 6 min for 5 million records. I had 170 million records in a table want to calculate the luhn digit for all of them which might take up to 4-5 hours.Please help me performance tuning (better way or better logic for luhn calculation) to the below function.
A wikipedia link is provided for the luhn algorithm below
Create or Replace FUNCTION AddLuhnToIMEI (LuhnPrimitive VARCHAR2)
      RETURN VARCHAR2
   AS
      Index_no     NUMBER (2) := LENGTH (LuhnPrimitive);
      Multiplier   NUMBER (1) := 2;
      Total_Sum    NUMBER (4) := 0;
      Plus         NUMBER (2);
      ReturnLuhn   VARCHAR2 (25);
   BEGIN
      WHILE Index_no >= 1
      LOOP
         Plus       := Multiplier * (TO_NUMBER (SUBSTR (LuhnPrimitive, Index_no, 1)));
         Multiplier := (3 - Multiplier);
         Total_Sum := Total_Sum + TO_NUMBER (TRUNC ( (Plus / 10))) + MOD (Plus, 10);
         Index_no   := Index_no - 1;
      END LOOP;
      ReturnLuhn := LuhnPrimitive || CASE
                                         WHEN MOD (Total_Sum, 10) = 0 THEN '0'
                                         ELSE TO_CHAR (10 - MOD (Total_Sum, 10))
                                     END;
      RETURN ReturnLuhn;
   EXCEPTION
      WHEN OTHERS
      THEN
         RETURN (LuhnPrimitive);
   END AddLuhnToIMEI;
http://en.wikipedia.org/wiki/Luhn_algorithmAny sort of help is much appreciated....
Thanks
Rede

There is a not needed to_number function in it. TRUNC will already return a number.
Also the MOD function can be avoided at some steps. Since multiplying by 2 will never be higher then 18 you can speed up the calculation with this.
create or replace
FUNCTION AddLuhnToIMEI_fast (LuhnPrimitive VARCHAR2)
      RETURN VARCHAR2
   AS
      Index_no     pls_Integer;
      Multiplier   pls_Integer := 2;
      Total_Sum    pls_Integer := 0;
      Plus         pls_Integer;
      rest         pls_integer;
      ReturnLuhn   VARCHAR2 (25);
   BEGIN
      for Index_no in reverse 1..LENGTH (LuhnPrimitive) LOOP
         Plus       := Multiplier * TO_NUMBER (SUBSTR (LuhnPrimitive, Index_no, 1));
         Multiplier := 3 - Multiplier;
         if Plus < 10 then
            Total_Sum := Total_Sum + Plus ;
         else
            Total_Sum := Total_Sum + Plus - 9;
         end if;
      END LOOP;
      rest := MOD (Total_Sum, 10);
      ReturnLuhn := LuhnPrimitive || CASE WHEN rest = 0 THEN '0' ELSE TO_CHAR (10 - rest) END;
      RETURN ReturnLuhn;
   END AddLuhnToIMEI_fast;
/My tests gave an improvement for about 40%.
The next step to try could be to use native complilation on this function. This can give an additional big boost.
Edited by: Sven W. on Mar 9, 2011 8:11 PM

Performance tuning help

hello friends,
i am supposed to use ST05 and SE30 to do performance tuning,and also perform cost estimation,
can some plz help me understand, i am not that good at reading large paragraphs, so plz donot give me links to help.sap
thank you.

Hi
Se30 is the runtime analysis
Here it will give you detailed graph about your program .
abap time,database time application time ..
st05 is sql trace where it will give you individual select stmnts in your program
and also proper index is being used or not.
Other performance tips
check any select stmnts inside the loop and replace with read statement
use binary search in read stmnts
use proper index in where condition in select stmnt.
if you want to execute st05..go st05..trace on-execute ur program--come to st05..trace off and --list trace...
you get summary details of select queires and it will be pink or other color.
Thanks

CF Performance Tuning Help

I moved our internal application from a P3 500mhz CPU 1U
server to a Duo-Core Xeon 1.6ghz server.
The newer box has a larger HD, more RAM, beefier CPU, yet my
application is running at the same or a smidgen faster than the old
server. Oh, I went from a Win2k, IIS 5.0 box to a Windows Server
2003 running IIS 6, mysql 5.0.
I did a Windows Performance Monitor look-see. I added all the
CF services and watched the graphs do their thing. I noticed that
after I ran query on my application, the jrun service Avg. Req Time
is pinned at 100%. Even several minutes after inactivity on the
box, this process is still at 100%. Anyone know if this is a
causing my performance woes? Anyone know what else I can look at to
increase the speed of the app (barring and serious code rebuild)?
Thanks!
chris

Anyone know what else I can look at to increase the speed of
the app
(barring and serious code rebuild)?
There are some tweaks and tips, but I will let more knowledge
folks
speak to these. But I am afraid you problem maybe a code
issue. From
the brief description I would be concerned there is some kind
of memory
leak thing happening in your code and until you track it down
and plug
it up, no amount of memory or performance tuning is going to
do you much
good.

Performance tuning in t

hi,
I have to do perofrmance for one program, it is taking 67000 secs in back ground for execution and 1000 secs for some varints .It is an ALV report.
please suggest me how to proced to change the code.

Performance tuning for Data Selection Statement
<b>http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm</b>Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.

Help me in Report(RDF) Performance tuning

Similar Messages

Maybe you are looking for