HELP ME lock problem

OK... i got my phone locked up and i dont know how to unlock it...
the i phone says "iphone disabled,,,connect to itunes".. so i tried that but itunes says it wont load up unless i can get the password .
PS.the lock screen goes directly to emergency call when i slide the password pan dont come out no more..
please help me

If the computer you're using is not the last computer the phone was synced with & you cannot remember the passcode, you will have to force the phone into recovery mode & restore it as a new device:
Turn off your phone: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone to turn off. If you cannot turn off your phone using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to set up as a new device, your only option.

Similar Messages

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Locking problems... Help me...

I am a novice...
But I have a locking problem..
First, OneRecord A is locked,
Second, OneRecord A is also locked...
Third, OneRecord A is also locked..
But if OneRecord A is unlocked, then First, Second, Third All 3 OneRecord A is awaken...(because of same object....)
so Security exception happen...(because one.getCookie() is different from cookie )
I want to make a program in order...
First, OneRecord A is unlock....
Second, OneRecord A is unlock...
Third, OneRecord A is unlock..
What shoud i do?
Help is appreciated...
I am not a native speakek in English..
Plz...
public long lockRecord(long recNo) throws RecordNotFoundException
 int a = (int)recNo;
 if( a >= vecrecord.size() || a < 0) throw new RecordNotFoundException();
 OneRecord one = ((OneRecord)(vecrecord.elementAt(a)));
 if( one == null) throw new RecordNotFoundException();
 long cookie = 0L;
 synchronized(one)
 if(one.isLocked())
 try
 one.wait();
 catch(Exception e)
 cookie = Thread.currentThread().hashCode();
 one.setCookie(cookie);
 return cookie;
public void unlock(long recNo, long cookie) throws SecurityException, RecordNotFoundException
 int a = (int)recNo;
 if( a >= vecrecord.size()) throw new RecordNotFoundException();
 OneRecord one = ((OneRecord)(vecrecord.elementAt(a)));
 if( one == null) throw new RecordNotFoundException();
 synchronized(one)
 if(one.isLocked())
 if(one.getCookie() != cookie) throw new SecurityException();
 one.setCookie(0L);
 one.notify();
 } Edited by: KIMJINHO on Sep 8, 2008 1:56 PM

I did not really understand but you should call wait inside of a loop.
As the api for Object.wait says:
* As in the one argument version, interrupts and spurious wakeups are
* possible, and this method should always be used in a loopI hope this helps
Additionally you should not catch an Exception without doing anything. At least log it or write it to the console.
Edited by: Domi27 on Sep 8, 2008 4:18 PM

Forms 6i : Ole Container : Locking problem

We have a form in which user can attach all sorts of documents that are then saved in the database.
Once in a while we have a locking problem; when 2 users try to open the same document, the second one first gets a 'Could not reserve record (2 tries). Keep trying?'. When clicking 'No', the next error message is 'Frm-40501 : unable to reserve record for update or delete', and the form cannot be used anymore. He keeps complaining about the reserved record.
I've been looking into this problem but cannot seem to find a lot of help.
Does anyone have an idea how to solve this locking problem?
I have tried the following things:
* setting the block to locking mode 'Delayed' => we ended up having duplicate records.
* Changing properties of the ole-container (In Place Activation, Inside Out support, ...).
Forms version is 6.0.8.13.0, database 8.0.6.0.0.
Any help is appreciated.

that seems to be a normal locking problem. Do you have tried to work with an ON-LOCK trigger ? (e.g. first to see, when locking will occur, second for implementing an own locking-behaviour, maybe with a SELECT for UPDATE)
Or do you think, that there is something special with your OLE-programming ?
Gerd

Lock Problem while Broadcasting multiple reports using process chains

Hi All,
I am trying to broadcast 10 reports using the process chains using the program for RSRD_START and variants created in the Broadcaster..the Program jobs start fine.But I am facing the error that the RSRA_CA_LOG table is getting locked while trying to broadcast the Reports..Can any help me on how to run the jobs without the locking problem..Suggestions please.
Thanks,
Mike.

Hi,
Thanks for the Inputs and the SAP Notes.
I am trying to broadcast the Reports from the the Bex Analyer and getting this ock error and not the workbooks.
I am also trying to Broadcast the Workbooks also, but could not find the options to Broadcast them. we are in SAP -BW3.5 SP 12, Is it possible to broadcast the workbooks in this Patch level..or do we need to upgrade to achieve this.If so...can any one provide me the proceedure to Broadcast the Workbooks.
Thanks,
Mike.

Activation lock problem!

Hello,
I just got a new iPhone 4s from a friend and I can't get into it because of an activation lock problem. I've already tried to restore it in recovery mode but than I still have to log in to his account. Now i've logged in to his iCloud account and deleted the iPhone using the following instructions:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed. It should show a gray dot or the word “Offline” next to the device name.
Click "Remove from Account" to remove the device from their account.
But it seems that I have should done the following instructions, because the iPhone wasn't completely erased yet:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
The problem is that it's too late for that now, because I already deleted the iPhone from his iCloud... Please help me out here, what can I do to still erase it from iCloud?!
Greets

Were you, by chance, running a beta version of iOS 7 on your phone?
If so, this will be the problem. You will need to log Into the private developers forum athttps://developer.apple.com/support/ios/
If you are not a developer, you will need to seek help by way of your favourite search site.

Dead lock problem occur in Ms-Sql Server

Hi friends,
I am using the 1,Tomcat server
2, jdbc-odbc-bridge driver
In my applicaiton .mutli user access time its throw -deadlock
exception . How to solve the dead lock problem.. please help it.
Can i modify the Db connection?
please help me .... How solve the dead lock problem..
please ............ its urgent

I am using this stored procedure to occur dead lock condtion. Orderly insert table values ..
Imm_tblGameTransactions- Primary Tables
Imm_tblGameDetailsBJ - Secondary tables
Please check it.....
Please explain breifly..... ....
please.........
CREATE procedure IMM_BJDeal
 @plid int,
 @gameid int,
 @betamt money,
 @bal money,
 @winamt money,
 @usercards nvarchar(500),
 @dealercards nvarchar(500),
 @useracecnt int,
 @dealeracecnt int,
 @dealerbj int,
 @userbj int,
 @insurance int,
 @split int,
 @push int,
 @sessionid int,
 @ltransid int out
as
 begin
 declare
 @transdate datetime,
 @linitbal money,
 @lfinalbal money,
 @errormesg varchar(50)
 select @linitbal=balance from Imm_players.dbo.Imm_tblPlayerbalance where playerid=@plid
 select @transdate=getdate()
 --set @ldealcards ='['+@dealercard1+','+@dealercard2+']'
 --print @ldealcards
 if(@userbj=1)
 begin
 select @lfinalbal= @bal
 begin transaction
 insert into Imm_tblGameTransactions
 (playerid,gameid,Initialbalance,transactiondate,betamount,winamount,currencycode,finalbalance,sessionid)
 values(@plid,@gameid,@linitbal,@transdate,@betamt,@winamt,'USD',@lfinalbal,@sessionid)
 IF @@ERROR <> 0
 Begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 End
 select @ltransid=@@identity from Imm_tblGameTransactions
 insert into Imm_tblGameDetailsBJ(transid,playercard,dealercard,typeid,result,statusid,split,insurance,playercardcount,dealercardcount,winvalue,betvalue)
 values(@ltransid,@usercards,@dealercards ,1,1,'PB',@split,@insurance,@useracecnt,@dealeracecnt,@winamt,@betamt)
 IF @@ERROR <> 0
 begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 end
 update Imm_players.dbo.Imm_tblPlayerbalance set balance=@lfinalbal where playerid=@plid
 IF @@ERROR <> 0
 begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 end
 commit transaction
 return
 end
 else
 begin
 begin transaction
 insert into Imm_tblGameTransactions(playerid,gameid,Initialbalance,transactiondate,betamount,winamount,currencycode,finalbalance,sessionid)
 values(@plid,@gameid,@linitbal,@transdate,@betamt,@winamt,'USD',@bal,@sessionid)
 IF @@ERROR <> 0
 Begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 End
 /*ELSE
 COMMIT -- Success! Commit the transaction*/
 select @ltransid=@@identity from Imm_tblGameTransactions
 insert into Imm_tblGameDetailsBJ(transid,playercard,dealercard,typeid,result,split,insurance,playercardcount,dealercardcount,winvalue,betvalue,statusid)
 values(@ltransid,@usercards,@dealercards,1,3,@split,@insurance,@useracecnt,@dealeracecnt,@winamt,@betamt,'G')
 IF @@ERROR <> 0
 Begin
 -- There's an error b/c @ERROR is not 0, rollback
 ROLLBACK
 return
 End
 /*ELSE
 COMMIT -- Success! Commit the transaction*/
 commit transaction
 return
 end
end
GO

Locking problem in BPS solution not getting solved using RSPLSE. SEM_BPS_S

Can anyone tell me exactly what "rsplse" offers to solve locking in BPS?
We have made correct selection of characteristics (in our case "costcentre" infoobject) in tab "Lock characteristics" , but still when two people are trying to access (write) data in the same transactional cube against the different cost centres, the system is throwing an error message Cube zIC_ccp is locked by username. (Or if a single person is using the two packages simultaneously using two web sessions , he is getting the same error. )
Our assessment is that he should not be facing this locking problem because cost centres here are acting as a key to different selection as configured in rsplse.
Can anyone tell me how to use parameter SEM_BPS_SAVE_UNLOCK. I want to know t. code and other t . code and other details to execute SEM_BPS_SAVE_UNLOCK.

Hi,
Please check the OSS note 635244.
From the OSS note :
 Notes on SET/GET parameters SEM_BPS_NO_LOCK, SEM_BPS_SAVE_UNLOCK :
These two parameters have nothing to do with the problem described above. They are only designed to facilitate the Customizing process, if users carry out Customizing in t ransaction BPS0 within a project.
SEM_BPS_NO_LOCK: This parameter has the effect that transaction data is not locked at all. Never use this parameter in a production system. As of Support Package 14 for Release 3.1B, parameter SEM_BPS_NO_LOCK is released by an additional switch in table upc_dark2: For this purpose you have to maintain a record with param = ENABLE_NO_LOCK and value = X in table upc_dark2. Only then the system includes parameter SEM_BPS_NO_LOCK. The parameter can then be useful if you want to test functions or the manual planning with 'test data' in Customizing.
SEM_BPS_SAVE_UNLOCK: This parameter only works in transaction BPS0; it has the effect that the system unlocks data (if possible) after it has been saved. Therefore, the system only simulates an exit and reentry in transaction BPS0 with the last active detail application. Therefore, the above parameter can be helpful if many people work on Customizing in transaction BPS0, because objects can be unlocked earlier.
Regards,
Siva.

P67A-G65 (b3) - Hard Lock Problem

I recently built a new machine (specs at the bottom of the post), and am experiencing random hard locks that I can't figure out. The locks generally happen 30-60min after booting up the computer, and seem to happen more often when idle than when in use, but I can't confirm that. I have tried turning off XMS and other overclocking on my memory, as well as doing a new install of Windows, but it still seems to be happening. I have updated all my drivers, and my BIOS is v1.8, so it's up to date with the current stable release version. I still need to try individually testing my memory sticks, but if anyone has any other suggestions that might help, they would be very appreciated.
Here's the hardware I'm using:
MSI P67-GD65(B3)
Intel Core i7 2600
8GB (2x4) Corsair XMS3 Memory (CMX8GX3M2A1600C9)
Corsair 750TX 750w PSU
ASUS PCE-N13 PCI Express Wireless Adapter
Western Digital Caviar Blue 1TB HDD
MSI N560GTX-TI Twin Frozr II/OC GeForce GTX 560 Ti (Fermi) 1GB 256-bit GDDR5 Video Card
Windows 7 64bit

I'm not picking on these specific posts but there is something that needs to be said about the tendency to look for problems in the motherboard or other components when things go wrong. It's really important to understand that a lockup, random reboot, BSOD, etc. is simply what happens when any of a thousand things go wrong with a computer build. It's similar to a car that won't start - it could be a failed electrical system, mechanical system or it could just be out of gas. Because of this, it doesn't help to search for a common thread, you need to look at each problem individually to understand the root cause.
It's also important to understand why computers from Dell, HP or any other manufacturer doesn't have the same problems you see when you purchase your own parts to build a system. These companies have research groups who are constantly working with different motherboards, RAM, video cards and other components to determine which ones are most reliable and more importantly, which ones work best together. When developing a new model, these people carefully select from the parts they have tested to design the new model including all the different video card options, drive options, RAM, etc. In addition, these systems are always configured to the safest specifications with no overclocking or anything else that could potentially cause a flood of support calls. Then each of these systems are built and tested using a long burn-in period with multiple copies of each system to make sure any potential issues are found and fixed. All of this is done before a new computer is sold to the public by one of these companies.
When you build your own system, you must perform these tasks yourself or your chances of success are very low. You can't just buy components based on what is popular or appears to be the best in class. You must carefully crosscheck every component to make sure they will (probably) work together. Finally, you need a systematic approach for assembling and testing your system one step at a time so if a problem occurs you will know what has probably caused it.
Just like the companies that sell full computer systems, all reputable computer component companies are also experts at designing and testing the parts they sell. They know that anytime a component has a problem there is lots of negative publicity, recalls and other consequences they all want to avoid (e.g. the recent Intel problems). So when you have built a computer that is randomly failing in some way, don't start by looking for problems with the parts you bought. This will only distract you from finding the real cause because 99.99% of all problems with new computer builds are caused by assembly errors or misconfiguration.
There are lots of people on this forum and others willing to help with build problems but you need to start with the assumption that something is wrong with your assembly or configuration and follow the posting guide. A simple step-by-step troubleshooting approach will save a lot of time in the long run.
- D

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Locking problem in VL02N at the time Post Goods issue

Hi,
We have implemented 2 BADIs to change qty in delivery and in subsequent documents. Once we receive an IDoc with batches, then we need to change subitems qty according to no of batches.
Once IDoc has updated, then PGI will do automatically.
1. LE_SHP_DELIVERY_PROC - Change qty in delivery (Method SAVE_DOCUMENT_PREPARE)
2. LE_SHP_GOODSMOVEMENT - Change qty in material document.
Now, we have a locking problem at the time of posting.
Please let us know, due to these BADI implementation this problem or any other cause? And provide required to solve this problem.

hi ,
do i need to do step 2....?
i dont think u need step2 ( change qty of MBLNR),bcos ,
say ur Del.qty is 100, now u want to do del. of 50, then just u will change its qty & do PGI ? so whats the need of changing MBLNR.
while doing PGI , program will take changed qty of del. only ?
let me know if i'm wrong.
regards
Prabhu

How do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

Is this happing because the external is formatted to PC and not mac?
Yes that is correct.
Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
regards

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

HELP ME lock problem

Similar Messages

Maybe you are looking for