Help me mighty mouse

i need help i just reinstalled arhive and intall and now my mighty mouse is not working. i can get the right click to work every were exept for the dock. the only menu i can get from the dock is the name of the program if you go overit. it did work before reinstalling mac os x

will 10.4.10 fix it

Similar Messages

  • Need Help: Wireless Mighty Mouse's Roller Ball Sluggish, Not Sensitive...

    Hello all.
    *I have followed Apple's Support Docu* to "hold the mouse upside-down and roll the ball vigorously while cleaning it to help dislodge any particles that may have collected on the internal hardware".
    But after I did that a few times, *my Mighty Mouse's rolling is still very sluggish, especially rolling/scrolling downwards, it is very in-sensitive, I almost have to push down the roller ball hard and scroll, then it will be effective.*
    *Any idea to fix this?* Or my mouse's "time is up"?
    Thanks and cheers

    Sure just needs cleaning. Get some Foam cleaner. Spray on tissue/cloth flip mouse upside down and scroll in the problematic direction for 2 mins.
    Add more foam cleaner to cloth and repeat until you have completed the points on a Compass.
    Its dirt and grease that causes that. Its a known design problem. A simple clean usually resolves for a few months and then you have to repeat again.
    ANY CHEAP FOAM CLEANER SPRAY WORKS FINE. as long as its for Computers.

  • Help with mighty mouse

    I have a problem and i ask you to help me
    I use a mighty mouse and i usually keep it with the original configuration (1 main button) and all the others off. Sometimes when i see a picture, if i hold the button for a couple of second it gives me the possibility of "save the image". Now it doesn't do it anymore...why??
    t

    upgrade to firefox 1.5 cancelled that feature

  • Mighty mouse acting up (now there's a surprise...) Please help.

    I've had this USB mouse since March 07 - so I know all about the problems, how to clean the track ball etc - and on the whole it's been okay so long as I serviced it regularly. But now it's acting up in a different way.
    Today the primary (left) button wouldn't work and had instead 'become' the secondary button. So I checked the settings in System Prefs and they were all okay. I cleaned the mouse. No difference. I reset the permissions (read somewhere that is can have an effect). Still nothing. Turned off the Mac. Unplugged everything. Fired it all up again. Same problem. Fiddled around with System Prefs again and found that if I turn off the trackball button, set left button to primary and right button to secondary, I get the primary button function back again (but secondary button does not work). I can get secondary button function by Ctrl+click (like the old days).
    Any ideas before I shell out 35 quid for a new one? BTW, I plugged in a seven year old Dell USB mouse and it works perfectly.
    PS. Mighty Mouse is stylish and neat but has never been trouble free like most other makes. Such a shame.

    Not so Mighty huh? Back to the drawing board. Perhaps someone else can help.
    Carolyn

  • Help with Bootcamp (Speakers and mighty mouse scroll wheel not working)

    So I just loaded bootcamp onto my macbook but I'm having some problems.  First, my scroll bar on my mighty mouse doesn't work when in Windows.  The only help I've seen online has been for those who haven't yet loaded windows.  Can I still download a driver that will help me out?  My speakers also are not working and the Realtek driver that everyone said worked for them didn't work for me.  Advice?

    Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=686228
    With luck it will be fixed in a future version.

  • Need Help.. Mighty Mouse not working in Windows & Internet connection prob

    This is my situation.. The new Imac G5, after i installed windows on it. it can detect the mighty mouse but it need a passcode for it. i've tried a few passcode. such as (1111,0000,123456) but it still can't, can someone give me a clue about this situation..?? but the mighty mouse is connected when i'm running mac os X.. n after that i've another problem.. which is the internet connection will disconnect every half an hour when i'm running a windows.. i think that is my internet connection.. but i've already tested the wireless internet connection in my house by using another notebook and it works and not disconnected.. can somebody help me for this problem..?? i will be very happy to hear any solution from you all.. thx a lot before..

    Welcome, you should be posting in the intel forum, I'll ask to have your post moved there. You need to pair your mouse with your computer. Open Bluetooth Setup Assistant and follow the instructions, you will b given a code for the mouse.

  • Mighty Mouse driving me nuts...please help

    Howdy,
    Just since last night, my mighty mouse (at least I think it's the mouse, but maybe it's something w/ the Op Sys--I dunno for sure) has been freaking out a bit. My cursor keeps jumping up to the exact top-center of my screen (NOT the upper left corner where it normally appears when you restart). It is extremely annoying. Sometimes it takes me like 30 secs. and a couple of dozen tries to get it to stay anywhere else on the screen in order to do any actual tasks with the mouse. But it will jump back up there within a min. or so at the max (usually it'll go back there just a few moments after getting it to stick somewhere else). It will even jump back up there in the middle of tasks (like when dragging & dropping...very, very annoying).
    Just FYI...I ran a permissions repair and shut down completely (including pulling the plug from the wall) and restarted. Obviously...it didn't help.
    Does anybody have any idea what is going on here? --Does my mouse need replacement? Is there any software fix I could try (my iMac is less than a yr. old and I bought the Apple Care Protection Plan)?
    Please help...Thanx a lot!

    Hey thanx a lot man! --There's a very good possibility it's just dirty. I'm pretty sure my mouse pad is ok as it's the same one I've been using for almost a year though.
    But I will definitely check out that link and do what I can as per it's advice also.
    I will be sure to come back and mark your post as solving the prob if everything comes out all right...otherwise, I might be asking you for more help...hehe!
    Thanx very much!
    P.S. I always liked Maryland's flag better than any other state...even mine (Hawaii). ~Seeya.

  • Mighty Mouse and Blue tooth...Help me please

    Hi,
    I got the wireless mighty mouse, and I am able too get it to work with the blue tooth, but every time I turn off my mouse, or turn off my computer, it disconnects and I have to go through reconfiguring my mouse every time. Is there a way that every time I turn on my mouse it will automatically connect? It is really annoying having to go through the process of setting it up every time! Thanks!

    Did you install the software that came with the mouse? Go into *System Preferences* and choose BlueTooth Under Settings be sure to check Discoverable Yo also might want to choose *Show Bluetooth in the menu bar*. This gives easy access to your settings and shows you when your mouse connects.
    In the same window choose *Devices and be sure your mouse shows up in the *BlueTooth Device* window. In the second window you should see the status of the mouse. If you don't see any of this info configure your mouse. You should see this in the bottom window.
    Paired: Yes
    Configured: Yes
    Favorite: Yes
    Connected: Yes (this will only say yes if your mouse is on.
    I never turn my mouse off. It will go to sleep to save power. If you wake up your computer just squeeze the mouse or press down to get it transmitting again. If you have done everything correctly the BlueTooth symbol in the menu bar will change to the symbol with a dashed line through it.
    Hope this helps.

  • Need help mighty mouse for re-install

    hello,
    I installed the software "steer mouse" on the imac G5 INTEL of
    my father but not being able to configure it I decided to remove it
    system (10.45) and when I am turned over in the preferences system to
    see the adjustments of his mighty mouse I realized that I did not have
    more the photograph of this mouse in order to regulate the various
    buttons but cursors to move unfortunately to say the scrolling speeds
    of the cursor, I do not manage to find the installor of this mouse, I
    would thus like to know how I can make.
    thank you to help me, I am French with a low level of English and thus
    I use Sherlock for the translations.
    imac G5 20 pouces intel   Mac OS X (10.4.5)  

    Welcome, you should be posting in the intel forum, I'll ask to have your post moved there. You need to pair your mouse with your computer. Open Bluetooth Setup Assistant and follow the instructions, you will b given a code for the mouse.

  • Getting a mighty mouse need help

    Hey everyone I'm getting a mighty mouse and I read something about needing a software cd to set it up . It doesn't come with a cd . I have 10.3.9 would it work (ie without any of the special features ) like a regular mouse only in bluetooth ? I ask because I also have a Microsoft wireless (usb not bluetooth ) mouse an if you don't install the software you can still use it as a 2 button mouse with scroll but the side buttons wont be recognized.
    Just wandering if the mighty mouse would be the same .

    I'm new to the discussion board. Had I seen your posting earlier, I would have reassured you that it would work fine. Happy trails...

  • Mighty Mouse stopped working, help!

    I have been using my corded Mighty Mouse since 2007 with no problems. I have encountered problems with the scroll ball getting clogged but have always been able to clean it. However recently the mouse just stopped working unless I put it on a textured surface. Prior to this it always worked without a mousepad right on my desk. I cleaned the mouse and desk so I don't think this is the problem. What could be the issue?

    For better tracking, ideally, you should always use a mousepad. A shiny clean table surface will not always give you the best performance...
    Just in case you want to take it apart :
    https://www.youtube.com/watch?v=3Su6JDxYqAM

  • Help with Wireless Keyboard and Mighty Mouse please!

    Hello. I own the wireless Mighty Mouse as well as the wireless keyboard for Mac, and while ago I set them up to work on my Mac, but I don't use them very much so I want to give them to my parents for their Mac. The thing is, I forgot how to set it up or install it or whatever. Can anyone tell me how to get the wireless mouse and keyboard to work, or what the install process is for them? Was there a CD that came with them that I need to install drivers with or something? Anyways, I have the mouse and keyboard sitting up here next to this computer, and I've turned them on with the switches on the back, but they're not working. What do I do next? Thank you!
    -- Andrew

    Solution
    Turn your Bluetooth keyboard and/or mouse off for 30 seconds, then back on.
    If the keyboard or mouse doesn't respond, or if an alert message appears again:
    Connect a USB keyboard or mouse.
    Open Bluetooth preferences (choose System Preferences from the Apple menu, then click Bluetooth).
    Verify that Bluetooth is turned on. (You can also do this with the Bluetooth menu bar item, if enabled).
    Pair the keyboard or mouse by setting it up as a new device.

  • I have messed up the settings on my Mighty Mouse and don't know where they should be.  I cannot open a document by double-clicking anymore.  I don't know what setting adjusts that.

    I need help with my Mighty Mouse settings.  Don't understand the settings.  I can no longer open a document by double-clicking.  I think I changed my setting someway when I was trying to correct or find my up and down scrolling.   Please help. 

    I think you need to un-pair your mouse.   Leave it a few minutes than re-pair it as if you were starting from scratch and using the following details.   Item 1 will probably meet your needs.
    Troubleshooting wireless mouse and keyboard issues

  • Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

    My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
    Can anyone suggest anything?
    Thanks.

    I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
    Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
    Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

  • Wireless keyboard and mighty mouse do not work with windows Vista

    I have a new iMac core 2 duo 20" used by my granddaughter.
    The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
    Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
    Any suggestions would be helpful.

    I had the same problem on the mac mini from my dad with windows XP.
    I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
    I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

Maybe you are looking for

  • How do I get a podcast on iTunes to show up on my iPhone?

    I listen to a podcast on a website but now that I have an iPhone, I'd like to able to listen to that podcast on my iPhone but I'm unable to. That particular radio station has apps to listen to the podcast for Blackberry and Androids, but not the iPho

  • GTX Titan in After Effects & Premiere CS6

    GTX Titan Superclocked now running in OS X 10.8.3 using the latest NVIDIA Web Driver (313.01.01f03) and CUDA Driver Version 5.0.59. I've modified both the "cuda_supported_cards.txt" file for Premiere Pro CS6 (6.0.2) and the "raytracer_supported_cards

  • Cannot see tif file with just 552KB

    Hi, I've received a TIF file from a scanned document but I cannot open it in my MacBook. The Preview sw says that it may be corrupted. However the same file file can be opened in a Windows based computer!? What's wrong? What can I do to see it in my

  • Exporting JPGs with their Original Filename

    So, I have these sets of cropping documents with images laid out in them taking up the entire frame, no text or anything else. At the end of the day, I need to export the crops with the original JPGs' naming convention. Right now, I am going through,

  • Credit Note Related.

    Hi Experts, While creating credit note from credit memo request,I am unable to get the same price as credit memo request. and in copy control I have maintained the Pricing type as " D ". So request you to kindly advise that how to get same value(Cred