Help me mine wont work

i got an nano 3 and i plugged it up and it only put 194 out of 515 song on there and none of my purchased songs from my fist ipod and so i got a new one and it did the same thing except i plugged my old nano up to it and it delteted all but 194 songs off of my old one(which i am still having to use) what do i do? or how do i fix it?

i got an nano 3 and i plugged it up and it only put 194 out of 515 song on there and none of my purchased songs from my fist ipod and so i got a new one and it did the same thing except i plugged my old nano up to it and it delteted all but 194 songs off of my old one(which i am still having to use) what do i do? or how do i fix it?

Similar Messages

  • Help my mini wont work at all

    ok so when i turn my mini ipod on a icon comes up that looks like the ipod with a sad face and a exclamattion point. i tried to reset it but it still comes up the same and i cannot restore it because it doesnt show up on my computer and it wont charge when i plug it in the usd port.
    gateway laptop   Windows XP  

    I had the same problem for months and after replacing the motherboard, my operating system and many other costly, unnecessary things I tried this....turn off your computer and unhook everything (including network/hi-speed connections). Connect back only the power, monitor, keyboard, and mouse. Plug in your ipod and see if it works.
    I went through these steps after someone told me a USB keyboard may be the probelm (if so, just get the adapter to convert to non-USB), but my problem was actually my printer - not the keyboard. Everything works fine when the printer is not plugged in to the USB port.
    Bottom line, if you unplug eveything and it works, start plugging things back in until you have problems.
    Good luck.

  • Help my Mac mini wont work with the airpot

    I have got the Mac mini Intel Core Solo G5 model and ive got a ibook G4 my G4 works great and fine but my mac mini does not. I connect to the base station fine useing the drop down bit on the taskbar in finder and enter the password and it connects. But when i do network assistant and it asks for me to eneter the password again it just basicly frezzes for a min then says invalid password when i know that it is the write base station password. It did work once but froze again and said could not connect. and when i go into the airport utlity it can't descover the base station even though it says it is connected with a full signal, im doing the excatly same things i did with my ibook but it just wont work. Please can someone help me and tell me what i have to do or give me some support this is my last hope as apple aren't intrested. I will be very gratful!

    The software update was for Intel based Mac computers and does not specify Core Duo or Core 2 Duo:
    AirPort Extreme Update 2007-001
    This update is recommended for all Intel-based Macintosh computers and provides compatibility with AirPort Extreme base stations and networks.
    This is the update that generated a fix at www.macfixit.com because some folks have been having issues with connection with their internet provider and some people have had issue with their airport systems just shutting down.
    It was part of an auto update that was received. One of my Macs is a MacBook Pro Core Duo (not Core 2 Duo) and this upgrade (download) was part of the update check that is automatically performed.

  • Refresh rate set wrong, mini wont work with TV anymore

    I have a Mac mini hooked to my conventional TV. I tried setting the refresh rate to 58Hz. I wanted to see if it made the picture any better. The image lost all vertical sync and the image rolls very fast. I thought maybe a confirm dialog box would switch it back to 60Hz after a set time. It didn't
    I tried putting it to sleep an waking it. I pulled the plug and restarted it. I reset the PRAM. The mini always switches to the bad refresh rate after start up.
    I hooked the mini up to my 23" Cinema Display. Then I can use it fine. However, there was no way to channge the TV settings. I hooked it back up to the TV and it still wouldn't work.
    So now I have a mac mini that wont work with a TV. The only thing I want to use it with. The only thing I can think is a last resort. To erase the hard drive and re install Mac OSX from scratch.
    Is there anything I can do short of reformating the thing? There really should be a timed out dialog box to confirm the setting, al la (dare I say) Windows XP.

    This is a real Catch-22 that has caught a bunch of us. If Apple wants lots of naive users to hook these up to their TVs as media centers, they need to have the kind of recovery mechanism you suggest. In the meantime, when I had the same problem and posted, there were lots of useful suggestions in this thread:
    http://discussions.apple.com/message.jspa?messageID=1913178#1913178

  • Help my mini wont read!!

    whenever i plug in my mini to itunesit wont read help!! help
    pc   Windows XP  
    pc   Windows XP  

    Hi,
    Welcome to Apple Discussions
    We need some more information then that to properly troubleshoot your problem. Do you get any messages? Does it show up in Windows? You might want to look at the following:
    "The Five Rs"
    Knowledge Base Document #61711, which troubleshoots When Your Windows PC Doesn't Recognize iPod
    Knowledge Base Document #93716 about What To Do When Your iPod Shows Up In Windows, But Not iTunes
    Jon

  • HELP: My mini wont start up :(

    My mini crashed and i was forced to turn it of at the back.
    Now when i try and turn it on it goes to the first screen the light grey one but the spinny load thing doesnt come up and just stays on that screen.
    I tried putting a startup cd holding C and that doesnt work either.
    WHATS HAPPENED???
    Help please.

    The instructions I gave you were for a PMU (Power Management Unit) reset. The PMU can get confused and fail to function correctly in situations where the system was powered down in the way you describe, and the result can be (though isn't always) that the system will fail to restart. Other symptoms could be that the system boots up fine, but external devices on USB or firewire ports don't work.
    What you did by unplugging everything and leaving the system in that condition for a few minute in effect does the same thing as a PMU reset, so I suspect the problem was that simple!

  • Help my apps wont work

    I installed a few free apps and a paid for one none of which will work suddenly
    JirboMatch
    Hangman
    MySpace
    The Holy Bible
    Ms Pac-Man--- paid for
    when I try to open them they just go back to home screen of iphone......
    Can anyone help?
    Thanks,
    Christa

    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.(Any free app will do.)
    Otherwise, Troubleshooting applications purchased from the app store,  http://support.apple.com/kb/TS1702

  • Please Help My iPhone wont work

    My iPhone isnt working. I turned it off last night but then when i got up this morning i hit the power on button and all it shows know is the whit apple logo in the middle of the iphone. But i need to get it back on. I have important apps on there for my buisness. I have an black iPhone 4S 32 GB. Please help

    use this article to help http://support.apple.com/kb/ts3281

  • Need Help Ipod mini not working

    I have a mini and it won't show up on my computer, at least I can't find it anywhere, if anyone one has had this problem please let me know if you remember some simple, and basic steps please write them out, I would greatly appreciate it, Thank You.

    Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various solutions that you can try to correct your problem. One should work.
    First, make sure that the iPod is fully charged.
    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
    Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
    Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
    If your iPod shows up in Explorer under 'my computer' try changing the drive letter: Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management. Right-Click on the iPod and select “change drive letter”. Choose something further along in the alphabet that is unused. Usually, “M”, “N”, “O” (or something similar).
    If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
    Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
    Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows”
    If all else fails, there have been some successes using the information in this post below. WARNING: I have absolutely no clue to what this download file does, and introducing it into your PC environment is risky. Some Forum posters have experienced less than benign results. Proceed at you own risk.
    http://discussions.apple.com/message.jspa?messageID=1222335#1222335

  • SOMEBODY HELP..WLAN WONT WORK..

    Couldn't get my n900 to work on WLAN, with SIM or without SIM card.. 
    apparently everything works fine, except the device keep saying that couldn't find the IP address..

    I had problems with mine!
    Does your router show up on the wlan n900 if not wait a few minutes especially if your neighbor's router show up
    you also may need to let your router  scan for wireless devices before it lets your n900 in and gives it a local IP address
    or as a last resort enter the details in manually
    dont forget once your router see the n900 ask it to give the n900 the same ip address every time if your router allows it
    puddy
    Message Edited by 123381 on 03-Jan-2010 08:56 PM

  • HELP: Smooth Cam wont work!!!

    Hello,
    I have been having some trouble applying the Smooth Cam Effect to clips in FCP 6. When a clip is active and I go to turn on the smooth cam effect in the video effects folder nothing happens. Smoothcam has no effect when it is applied. Replaying the clip with the effect on it does absolutely nothing different from the original. This is not a problem with exporting. This is a problem of just applying the effect to a clip. It doesnt even analyze the clip it should be applied to.......
    I have used this effect on other footage and have seen the difference it can make. However, with the clips I am currently working with I see no difference. All of the footage I am trying to apply this effect to is very jittery with a lot of fast camera motion. Footage that I thought would be perfect for the Smoothcam effect. Has anyone else experienced trouble with the smoothcam? Is there something I am doing wrong here?
    Any help would be greatly appreciated.

    It is possible that the clip's media you are having troubles with was previously analyzed.
    Control click the clip/s in question and in the popdown menu choose reveal in finder.
    If next to the original media you find a file with blank icon and extension .mtdf delete/trash that and apply smoothcam again.
    Remember that when applying the filter the entire media file to which your clip in the timeline refers to will be analyzed.
    If you want a specific portion (an edited clip) of the media to be affected by SCam then set IN and OUT and export that as QT movie self-contained (no loss of quality involved) then re-import that and apply SCam.
    L.

  • HELP toolbar player wont work after upgrading to itunes 11

    after upgrading to new 11.0.0.163 my minimized player doesnt work, everything is grayed out....yes its set to be active in my toolbar, no i do not mean the mini player on the main screen...
    this version *****...
    and as other people mentioned, it didnt upgrade a very good portion of my music library.

    I'm wondering if the reason is that there are simply so many match requests that Apple's network is not able to readily meet the demand. One reason I believe this may be the case is that I've never subscribed to iTunes Match, yet when i upgraded to 11, I also observed the "Sending Information To Apple" message for what seemed to me to be a long time. Having never subscribed to iTunes Match, I clicked the "X" to stop the process, and now I'm left with lots of songs that have been assigned the iCloud "Waiting" status, which I can't find a way to change without taking the initial action of subscribing to iTunes Match. So the question I will probably post as a new discussion might be something like, "Is there a way to resume a canceled automatic match process to resolve the "Waiting" iCloud status designation after an iTunes 11 upgrade without subscribing to iTunes Match?"
    To summarize, I think it's likely that demand for matching is too great to be handled quickly through available network server resources, and that's at least partly due to the fact that every connected user with an iTunes library is undergoing the match process upon upgrading to iTunes 11, not only those for which an iTunes Match subscription was already active.

  • Help my apps wont work on my new ipad

    I just synced my new ipad and my apps wont open. Help They seem stalled.

    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.(Any free app will do.)
    Otherwise, Troubleshooting applications purchased from the app store,  http://support.apple.com/kb/TS1702

  • PLEASE HELP ME iTUNES WONT WORK OR OPEN

    iTunes will not open when i click the icon. why? can comebody please anwaser my posts my iPod really doesnt work!

    Try a reset.
    You should not leave your phone number on a public forum.
    iPod touch User Guide (For iOS 4.3 Software)

  • Pls help, nokia N80 wont work :(

    My phones bust so just got a phone from a friend.
    Got the N80, i can recieve texts and phone calls. And also make phone calls.
    The onlny thing i cant do is send texts.
    When i send it it comes up with a message saying "unable to send message"
    I really havent a clue and i really need to get it sorted.
    So if you could please help ^_^
    x

    Hi ircase
    You could check your message centre number to see if it's correct by going into Messages > Options > Settings > Text Message > Message Centres.
    If you were UK based I would suggest looking at this post by adamf
    /discussions/board/message?board.id=messaging&message.id=9890#M9890
    Message Edited by scoobyman on 02-Nov-2008 11:13 PM
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for