Help me My N82 browses the internet in white font

Hi Everybody
I have a strange issue
When I browse the internet using my N82 web browser & I am asked to fill any field on the web page the font color is in white

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

My iPad air keeps crashing and freezing when browsing the internet . Please help :(

My husband and I updated to the new OS. Now our iPad Air's keep crashing and freezing whilst browsing the internet. We have done a reset and swiped away pages but nothing is helping. Its very frustrating Can anyone help? Thank you Jo

Please tell me that it has NEVER been jailbroke. If it has not been jailbroke, here are some standard repair procedures:
First, confirm that this is what you did for a "reset." Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, since you have IOS-7, read this.

I'm unable to browse the internet at home on my Macbook Pro (10.6.3), even though it shows I am connected to the wireless network with full bars.

This problem began weeks ago, when I suddenly couldn't browse the Internet at home despite being fully connected to the network. The network was a private, password-protected wireless network set up through a Netgear router.
I have spent hours troubleshooting and have tried multiple fixes including resetting PRAM, deleting and re-creating Airport, deleting and re-creating networks, changing IP and DNS, etc. to no avail. My roommate's PC works perfectly fine on the same wireless network.
This seems to be an issue with networks I use long-term. I can connect fine to networks at Starbucks, etc. for short-term use. Also, while trying to troubleshoot my connection issues on my home network over the last few weeks, I'd been using my apartment complex's public wireless connection (no password) with no issues. All of a sudden, I am having the same exact issue with that network. It's like something just snaps and maybe gets configured wrong after a few weeks or months of use.
I am desperate to find a fix, since now I can't use the internet AT ALL while at home and need it for work.
Thank you in advance for your help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Is normal when i connect to wifi i can't view the bb icon whoever that i can browser the internet normally

is normal when i connect to wifi i can't view the bb icon whoever that i can browser the internet normally, i have bb curve 9360

Hi and Welcome to the Community!!
It might be normal...I've heard (while rare) of some carriers preventing their BB users from using BB-proprietary services via WiFi. But, with a strong carrier network signal (e.g., not WiFi), I do suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Itunes is skipping while I browse the internet

My Itunes is skipping while I am on my PC and attempting to browse the internet at the same time. Any suggestions?

This seems to be a very common problem after upgrading to iTunes 7. Apple offer this help on troubleshooting the problem:
http://docs.info.apple.com/article.html?artnum=93610
Some people, like me, never completely resolve the problem. I got rid of most of the stuttering except when a large program was loading by following the above advice.
In the end I downgraded back to 6, but this is only possible if you have an iPod that is OK on 6 and you don't want the content offered on V7.

ITunes skips, stammers when I browse the Internet

This didn't occur before I upgraded to 7.0+.
I used to be able to browse the internet to my hearts content AND listen to iTunes. No longer.
Looking through Best Buy's weekly ad? Skips.
Searching for something on eBay? Skips.
I don't think I should buy a second computer to listen to iTunes. I have an AMD Athlon 64 processor with 2 GB of RAM. I ought to be able to surf the web and listen to iTunes at the same time...
Does anyone have any ideas? Apple has been unresponsive.

This seems to be a very common problem after upgrading to iTunes 7. Apple offer this help on troubleshooting the problem:
http://docs.info.apple.com/article.html?artnum=93610
Some people, like me, never completely resolve the problem. I got rid of most of the stuttering except when a large program was loading by following the above advice.
In the end I downgraded back to 6, but this is only possible if you have an iPod that is OK on 6 and you don't want the content offered on V7.

BBSM clients cant browse the internet

Problem : BBSM clients cannot browse the internet
Network: (INTERNET)----ROUTER(NAT)----(externat)BBSM(AtNatMP)---trunk---SWITCH(3750)-Clients
From the BBSM server I can browse the internet. From BBSM I can ping network components . When we add users to the 3750 switch, open a browser, authorization is ok. BBSM Connected. But then a screen comes up âYou are connected to the internetâ¦â¦However, the internet address you requested was unavailableâ¦.try another URL ) â . From the computer connected to the switch, I cannot ping www address ping time out but I can resolve dns-to-ip. Forwarding DNS configured.
I configure BBSM (step by step) in Laboratory because I have some error in clients install site.
Where is my mistake? Please Help.

Refer to the troubleshooting section of the Cisco BBSM 5.2 User Guide for more information which may fulfil your requirements
http://www.cisco.com/en/US/docs/net_mgmt/cisco_building_broadband_service_manager/5.2/user/guide/use52_05.html

7970 Phone - Browsing the internet

Hi Guys,
I was wondering if it's possible to browse the internet with a Cisco 7970 phone.
If it's not possible to browse the internet, what service are available like : getting the temperature ( with the service button ), etc..
thanks a lot

You cannot browse the internet directly from the phone. Here are a few free services.
http://www.berbee.com/public/berbeesoftware/XMLFree.aspx
Hope this helps. If so, please rate the post.
Brandon

Internet connection lost after browsing the internet

Hi, I am fairly new to the mac world. (less than two years) And I have a problem that I was hoping someone can help me with.
I have a Power mac G5 dual processor, with Mac osx panther installed. Everything works great, except when I try to browse the internet. For some strange reason it will drop my connection and to bootm I also have a G5 server that I am connected to, but as soon as I lose my internet connection I also lose my connection to my server. Now I know it can't be the router since other computers keep their connection while mine drops randomly.
Our office has a basic setup, computers and server plugged into a switch, the switch goes to the 2wire (router/DSL combo) device. The firewall is within the 2wire and the server's and computers' firewall are disabled, since the 2wire has the firewall protection the whole subnet.
Please help
Thank you
G5 Server Mac OS X (10.3.9)

I had this same issue on an Acer Aspire 5520 laptop with an atheros chipset for which I was using ndiswrapper. Long story short I downgraded to kernel 2.6.24 and that fixed the problem .
Sorry not much help...I have no idea where the culprit is, but it is a very annoying problem.

How to use your Treo 750 to browse the internet on your mac

Hi There,
I am by no means an expert on this, but this is what has worked for me. I'm on Vodafone in New Zealand but I think this setup (or very similar) should work with Cingular in the states or other Windows Mobile v5 devices.
1. Install The Windows Mobile Modem Scripts Onto Your Mac
Download the Generic Windows Mobile Modem Scripts (3 of them) from: http://www.taniwha.org.uk/
The scripts are under "Windows Smartphones & BlackBerrys" called "Scripts for Windows Mobile phones" (half way down the page)
Once downloaded, put the scripts into >Library >Modem Scripts
2. Start Bluetooth on the Treo
Go >Start Menu >Settings >Connections (from the bottom) >Bluetooth
Tick "Turn on Bluetooth"
Tick "Make this device discoverable to other devices"
Click OK
3. Pair The Treo with your Mac (done on the Mac)
If the Bluetooth menu is not already on your mac (near the date and time, top right) go to >System Preferences >Bluetooth
Under the "settings" tab tick "Show Bluetooth status in the menu bar" and the menu will appear
Once the menu is there, choose "Set up Bluetooth Device..."
Click "Continue" and on the next screen choose "Mobile Phone". Click "Continue"
Make sure the screen on the Treo is on (I've found the mac has trouble discovering the device otherwise)
Choose your phone and click "Continue"
Click continue and enter the pass code on the Treo and click "Next"
Once pared, on the phone click "Finish"
On the mac, make sure "Access the Internet with your phone's data connection" is ticked and click "Continue"
Enter your Vodafone (or Cingular) account username and password (see notes below)
Under phone number enter: *99# (this invokes GPRS or the 3G data connection)
Choose "Windows Mobile GSM 460k" from the "Modem Script" pop up menu
Click "Continue"
Click "Quit"
Select the new phone from the Bluetooth Devices list and press the "Edit Serial Ports" button from the left
Click the plus sign under the main window
Name it "Treo750" (or Cingular or Vodafone or whatever you want)
Choose "Modem" from the "Port type" pop up menu
Tick "Require pairing for security" and "Show in Network Preferences"
Click "Apply"
4. Configure The Bluetooth Port
Go >System Preferences >Network
Choose "Network"
A "New Port Detected" window should pop up, click "OK" (if it doesn't and you have a new "Bluetooth" port, don't worry)
Select the "Bluetooth" port from the list and click "Configure"
Under the PPP tab, click the "PPP Options" button from the bottom
Untick "Send PPP echo packets" and "Use TCP header compression" under "Advanced Options"
Click "OK"
Click the "Apply Now" button from the bottom right
Close System Preferences
5. Connecting to browse the internet from the mac
Go >Applications >Internet Connect
Click "Bluetooth" from the top
Tick "Show modem status in menu bar"
Quit internet connect
Make sure the Treo is on and bluetooth is on (and your data connection is on, see notes below)
Go up to the internet connect menu (the little phone icon) and select "Connect"
Notes
For the carrier account name and password, I just used the same account info that was on my phone under >Start >Settings >Connections >Connections Icon >Manage existing connections >Edit "VFNZ Internet" (or your carrier name) >Next Screen >Next Screen >Next Screen. On this third screen, I found my account details.
If for you there is nothing, then more than likely your carrier doesn't require a name and password - so on your Mac, leave these fields blank and just enter *99# for the phone number. Although, I think you may have to use something (for Mac & Windows Mobile compatibility) so just try entering username: guest and password: guest. There is much more info regarding this in the readme file that comes with the Windows Mobile modem scripts. Or contact your carrier for your specific details (probably the best thing to do!).
I have found the connection to be a little bit unreliable when the Treo's screen goes to sleep - so I tend to hit a button on the treo every 30 seconds to keep it on - But Vodafone here in NZ has flashed the ROM to make it HSDPA compatible so others may not have this problem.
I had trouble the first time I tried to connect through internet connect. But after I connected through >System Preferences >Network >Bluetooth >Connect button next to the configure button at the bottom, it worked every time from the Internet Connect menu.
Also, you may want to check your email or browse a page on the Treo first, just before connecting from your mac to make sure the data connection is on - I haven't worked this out fully but I'm not sure the Mac can open the data connection itself. Again, this may be a region/carrier specific issue.
Cheers
Ben
Macbook, Treo 750v (Vodafone)

I've also found The Missing Sync to work much better than Pocket Mac for syncing the Treo to the Mac.
www.markspace.com

Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Using a mac book pro !
Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Good question bigboggerchoot. I also would like to know the answer to this.

While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen.

While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.

Mac Book Pro - while browsing the internet, i hear ads but do not see them. an ad will start talking while i am watching netflix or anything else but there is no window to close. what is this and how do i get rid of it?

when i am browsing the internet, i use google chrome, several pop ups open in new windows and i have to constantly close them. some windows even open up and the sound of an iphone ringtone is playing and i have to click on leave this page in order to close the window. some windows open up and say my computer may be infected and suggest downloading "mac keeper" to keep my laptop safe, which i did not do. and the most annoying one is while i am watching netflix or any movie using the internet, i will hear ads playing while the movie is playing but when i go to look for an ad to close there is none. it will go on and off as the movie is playing. what should i do?!?!?!

The Safe Mac
The Safe Mac » Adware Removal Guide Genieo
Thomas Reed's Mac Malware Guide
AdwareMedic
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Mac Virus Malware Info
MacBook Pro

My Firefox won't let me browse the Internet, even though I'm connected to the Internet.

Excuse me, but my Firefox 3.6 just randomly stopped working. It won't let me browse the Internet anymore-- the error message it always gives me is "Unable to connect", even though I'm fully connected to the Internet. Earlier I opened up Safari and Internet Explorer 9-- both, in which, let me browse the Internet, and I had a full connection. But, whenever I use Firefox now, it says "Unable to connect". And every time I type in a URL on it, Firefox gives me the ''SAME'' error message. I don't know what to do now. I uninstalled and reinstalled Firefox and it does the same thing. So now I am stuck with using Safari, when I really wanna use my Firefox. Why is it doing this?

Make sure you are not set to Work Offline in File menu.
There is a possibility that your connection dropped even briefly, more so if using wireless. Make sure Firefox is not set to "[v] Work Offline" in File menu just above Exit.
By default, Firefox 3.5 and 3.6 will automatically use offline mode if there is no network connection. Under certain conditions, after the connection is reestablished it may remain in offline mode without the user's knowledge. Firefox 4 and newer prevents this behavior by default. To prevent this behavior in versions 3.5 and 3.6, add an entry to the '''about:config''' options, as follows.
* Type '''about:config''' in Location (address) bar
* Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean preference. Name: '''network.manage-offline-status'''. Value: '''false'''
http://kb.mozillazine.org/Error_loading_any_website#Work_Offline_Setting

HT1947 I just installed apple tv and want to connect my iPad to apple tv to browse the internet on my tv

I am trying to use my iPad to communicate with the apple tv I just purchased, do I need AirPlay and if so is it a free app

Airplay is not an app, it's built-in. However, what are you are referring to (i.e. browsing the internet) is mirroring.
This requires iPad 2 (or later)
http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

Help me My N82 browses the internet in white font

Similar Messages

Maybe you are looking for