Help me OC my KT3 please

After having gone through my BIOS settings I am somewhat confused as to what some settings actually mean for the overall speed of the machine.  Currently I use Fuzzy Logic to boost the FSB of the machine but this seems to not achieve what it used to. By this I mean I could get the machine running at 2200MHZ but of late I can't go beyond 1900. It is showing a multiplier of 12.5 x 152fsb. Has anyone else have any luck with the KT3 Ultra board. I am using it with 1 gig of PC2700 Nanya memory, together with an XP2600 processor and 3 hard drives. Any advice would be very gratefully received.Thanks.

As you speed up the fsb on a via chipset based board with an agp-pci lock, the agp and pci bus also increases in speed until the next preset is reached inside the chipset.  (133-166)  The preset then returns the agp and pci bus speed back to 66MHz and 33Mhz.  You can experience instability when the bus speed goes more than 3Mhz above the preset, depending upon the components installed in the pci and agp slots.  Try setting the fsb to 166 in the bios with a small bump in vcore and see if that works.

Similar Messages

  • Help me fix my 8900 PLEASE! Desperate now

    Hi
    A month ago, I was using my phone - had like a 20-30 minutes call, it was quite hot, so I was a little sweaty through the call (relevance will come later).
    Anyway, 5-10 minutes after call, my keypad stopped functioning completely. Read around, they said it is most likely a moisture issue.
    So now, I gave it in to a mobile repair centre - after holding it for 1 month - they said they couldn't fix it...
    What can I do to have it fixed!? Would maybe reformatting help (if anyone has a method of reformatting phone via Desktop manager - I would appreciate it). I am not worried about cost :/.
    Thank you ;(.

    Reformatting and software won't do squat for a hardware/moisture problem.
    You are probably about a month late to post here, if done in time, moistures issues are very easily overcome. 
    HOWEVER, the salts in your sweat are the problem here. Salty moisture will dry and leave minerals deposited on the inner workings of the keyboard and those mineral deposits can short the keys out.
    Nevertheless... you can try/attempt to dry out your keyboard, remove the battery and LEAVE the device open in a bag/box of dry rice for five days. Do NOT replace the battery each day to check it. Electricity and moisture do not mix well... 
    http://www.blackberryfaq.com/index.php/Got_Your_Bl​ackBerry_Wet%3F
    All that said... if cost and money is not a problem, get a new 8900. I have a feeling you've fried this one by waiting too long.
    And, get a Best Skins Ever for full protection of your device.
    Message Edited by JSanders on 10-07-2009 10:57 AM
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help me save my texts please!!

    I updated my software to the os 6..its not the best but I've gotten used to it. The problem I hyave though is with the new software there is no keep sms messages forever option. My text conversations are constantly getting deleted...any way to keep my messages forever without having to back them up on a computer??

    First thing? Check the File Free at Options > Device > Status, what is the number at File Free?
    Now, leaving the device powered ON, remove the battery of your device, hold a minute, replace and reboot.
    What is the File Free now?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help me find my ipod please

    i lost my ipod touch in my friend's dad's car or in my room.. i looked everywhere in my room.. nd my friend say her dat looked in the car and didnt see it, bt i dont kno how thoroughly he looked but i kno its either in his car or in my room, because the last place i had was in his car. I have the app Text Me on my ipod can that in any way help me find my ipod because, the wifi on my ipod is turned off, and i dont have other apps or anything to help me find it.. please help because my mom bought me that for christmas and its was very expensive.

    With wifi off all you can do is look for it like a lost glove. Sorry.

  • Urgent help for extremely new newbie - please.

    I have been asked to set up a Labview program to graph and log
    thermocouple temperature measurements from two Keithley 2001 Multimeters
    and a DC voltage from HP 34420A nano Volt/Micro Ohm Meter. All three are
    instruments are IEEE interfaced to a Windows 98 machine running Labview
    (version 5.0 I think.) I have a couple of weeks to get the job done.
    The problem is that I have never used Labview. I am an experienced C,
    Fortran, BASIC programmer but this graphical system is completely new.
    My situation is complicated because I am told the experienced person who
    was originally going to set this up left under bad circumstances and
    took many of the manuals. I would greatly appreciate any and all help I
    can get.
    Please feel free to send responses directly to me.
    [email protected]
    Thanks,
    Stan Thomas

    In article
    <[email protected]>,
    Stan Thomas
    wrote:
    > I have been asked to set up a Labview program
    to graph and log
    > thermocouple temperature measurements from two
    Keithley 2001 Multimeters
    > and a DC voltage from HP 34420A nano Volt/Micro
    Ohm Meter. All three are
    > instruments are IEEE interfaced to a Windows 98
    machine running Labview
    > (version 5.0 I think.) I have a couple of
    weeks to get the job done.
    > The problem is that I have never used Labview.
    I am an experienced C,
    > Fortran, BASIC programmer but this graphical
    system is completely new.
    > My situation is complicated because I am told
    the experienced person who
    > was originally going to set this up left under
    bad circumstances and
    > took man
    y of the manuals. I would greatly
    appreciate any and all help I
    > can get.
    >
    > Please feel free to send responses directly to
    me.
    >
    > [email protected]
    >
    > Thanks,
    >
    > Stan Thomas
    >
    >
    All manuals are available at
    http://www.natinst.com/manuals/
    They also have an example program database at
    http://www.natinst.com/support/epd/
    Sten Karlson
    D/A Production AB
    SWEDEN
    Sent via Deja.com http://www.deja.com/
    Share what you know. Learn what you don't.

  • Hi I have a Iphone4 in using. I couldn't find Safary, E-mail and notes from my phone one day. I made this mistake when I want to delete some programe from my phone. Who can help I recovery my phone please.

    Hi
    I have a Iphone4 in using. I couldn't find Safary, E-mail and notes from my phone one day. I made this mistake when I want to delete some programe from my phone. Who can help I recovery my phone please.
    Thanks

    Hello, HenryWang2103.
    Thank you for visiting Apple Support Communities.
    The Safari, Email and Notes applications are native to the iOS and is unable to be deleted.  Since this is the case, they are either in a folder on the iPhone, on another page or Restrictions are enabled.  You can also search for these Apps on the iPhone by touching the screen and sliding your finger down.  Here is some information regarding these features.  The information about folders is located in the user guide below.
    iPhone User Guide
    iOS: Understanding Restrictions (Parental Controls)
    http://support.apple.com/kb/HT4213
    Cheers,
    Jason H.

  • I purchased a factory unlock I phone 4s and I want to use it on idea cellular network..can you help in settings of 3G please?

    I purchased a factory unlock I phone 4s and to use it on idea cellular network..can you help in settings of 3G please?

    In ? which country and I mean a Store owned and run by Apple
    I see Apple do not have any stores in India
    Idea (if you are in India) is not an approved Apple carrier but IF your iPhone
    is a genuine unlocked iPhone it should work on a GSM network
    although all the features will not be supported
    Put in a microsim and  activate  through iTunes

  • Whenever I open itunes in my ipad a message comes "cannot connect to iTunes Store"...help to get it right please

    Whenever I open itunes in my ipad a message comes "cannot connect to iTunes Store"...help to get it right please, I have  the new I pad and I was able to connect to iTunes before,and I use 3 g network..there is no network problem for sure because I could use safari and App Store perfectly...

    Make sure cellular data is turned on..I checked and it was on
    Tap Settings > General  > Cellular
    Switch Enable 3G to off then back on.
    Same for Wi Fi. Tap Settings > Wi-Fi. Switch off then back on.'
    Then restart the device.
    edited by:  cs

  • TS3694 hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

    hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.

    Hi ali hakim,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/TS4451
    This occurs when iTunes is unable to communicate with the update-and-restore server (gs.apple.com). This is most likely because it is being blocked, redirected, or interrupted by security software, hosts-file entries, or other third-party software.
    Cheers,
    - Judy

  • HT5568 when i try to install the Safari 6.0.2 update i get the message an error has occured The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please

    when I try to install this update I get the message an error has occured The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102) - can anyone help my get the update please?

    There are problems with the servers. Download and install that update > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

  • I can´t ear the voice in my iphone 5 on a call phone, help!!!! please

    i can´t ear the voice in my iphone 5 on a call phone, help!!!! please, it´s the same if a answered or make a call. somebody help me please!!!!!!!!!

    Try restoring your device as new and test it that way. http://support.apple.com/kb/HT1414
    If it still doesnt work then you may have water dammage or just a hardware issue. Device needs to be replaced.

  • I need help fixing kernel panic asap please help

    i need help fixing kernel panic asap please help

    OS X- About kernel panics
    Mac OS X- How to log a kernel panic
    Post a copy of your most recent complete panic log.

  • Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

    Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

        I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

  • TS1424 I get "We could not complete your iTunes Store request. An unknown error occurred (4002)  Can any person help me with this on, please?

    I get "We could not complete your iTunes Store request. An unknown error occurred (4002)  Can any person help me with this on, please?

    Turning off iTunes Match and Genius and then turning them back on appears to have worked for some people e.g.
    https://discussions.apple.com/message/22059685#22059685
    https://discussions.apple.com/message/18427550#18427550

  • Adobe Flash plug-in crashed ! Help?!...please.

    Okay, my Firefox has crashed apparently. So it says 'The Adobe Flash plug-in has crashed'. Okay, so what do I do? I tried fixing it on my own, scene I am usually good with this kind of problems, and what I researched it tells me to click the little 'send crash report' link. But it doesn't show and says 'no crash report' so like HELP?!...please.

    ****************************************************
    I WAS HAVING THE SAME ISSUE AND DECIDED TO UNINSTALL FIREFOX 3.6.4 AND REINSTALL FIREFOX 3.5.10. AFTER I DID THIS, I WAS ABLE TO PLAY ALL THE GAMES WITHOUT GETTING THE CRASH PROBLEM!!!!!!!!!!!!!! JUST THOUGHT YOU WOULD ALL LIKE TO KNOW...GOOD LUCK...I'M STAYING W/FIREFOX 3.5.10!!!!!!!!!!!

Maybe you are looking for