Help me out by testing a site
My parents recently bought new iMacs in December. They are thrilled; however, my father is having trouble occasionally with Safari. It seems that a particular website will not load. He types in the address, and Safari just sits there - nothing happens. It's not like the program freezes, it's just that the website will not open.
There are a number of factors that make this problem a bit odd:
1) He has a Dell computer at his house running on the exact same network, connected to the Airport Extreme Base Station that the macs are using. The page loads on his Dell machine.
2) He also has Parallels installed on his Mac. If he opens Windows XP through Parallels, the page willi oad.
3) I have an older mac (iMac G4) but I am using the latest version of Safari with Leopard 10.5.2. The page loads on my machine running Safari at my house.
He has emptied the cache in Safari to no avail.
Could someone with a recent iMac try to open the site so that I know it's not isolated to just his machine?
The site is www.wvmetronews.com
Thanks!
GREAT IDEA. I'll walk through this with my Dad this afternoon and we'll see if that isolates the issue.
I appreciate everyone giving this a shot.
We actually found another website yesterday (rival.com) that also doesn't load. I'm still trying to figure out how my Dad is finding these random websites, but that is a different discussion altogether.
Similar Messages
-
i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)
Hi
You can check the BC pricing here
US Yearly Pricing | Adobe Business Catalyst -
i ran the diagnostic test and got this result.please help me out friends
Microsoft Windows 7 Ultimate Edition (Build 7600)
TOSHIBA ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0015AB8402A8B010
Current user is not an administrator.
The current local date and time is 2012-05-15 09:28:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Intel Corporation, Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {3E4453B3-9F50-4117-8981-7391E871F420}
Description: Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 03:00:00 1970
Lease Expires: Thu Jan 01 03:00:00 1970
DNS Servers:
Adapter Name: {2E1A8652-B977-4486-A1C2-4D1EDC4204CF}
Description: Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller
IP Address: 192.168.1.18
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue May 15 09:21:21 2012
Lease Expires: Fri Oct 12 09:21:21 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-07 20:18:49.Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
Really need help on how to write this program some 1 plz help me out here.
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
For Part 1 this is what i got
import java.util.Scanner;
public class Window
public static void main(String[] args)
double length, width, glass_cost, perimeter, frame_cost, area, total;
Scanner keyboard = new Scanner (System.in);
System.out.println("Enter the length of the window in inches");
length = keyboard.nextInt();
System.out.println("Enter the width of the window in inches");
width = keyboard.nextInt();
area = length * width;
glass_cost = area * .5;
perimeter = 2 * (length + width);
frame_cost = perimeter * .75;
total = glass_cost + frame_cost;
System.out.println("The Length of the window is " + length + "inches");
System.out.println("The Width of the window is " + length + "inches");
System.out.println("The total cost of the window is $ " + total);
Enter the length of the window in inches
5
Enter the width of the window in inches
8
The Length of the window is 5.0inches
The Width of the window is 5.0inches
The total cost of the window is $ 39.5
Press any key to continue . . .
Edited by: Adhi on Feb 24, 2008 10:33 AMAdhi wrote:
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
What have you written so far? Post it.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
“Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.”
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
% -
Somebody help me out here!!!!!!! I cant figure out how to play games on mac
evertime i put a pc game in it asks me to look for a file to open it and its onlys the system profiler and it dont work how the **** do you play games on the mac book pRO!!somebody help me out it!!!!
The issue is that you are attempting to run software written for one operating system (Microsoft Windows) on another (Mac OS X). That doesn't work... However, that doesn't mean you're out of luck:
1. Many popular PC games also happen to be available native for the Mac. Check if the particular games you want to play have a native Mac version. If they do, using that is best since it's easier to install and use and will perform best.
2. Failing that, you can actually run Windows on the Mac in order to run the game. There are two supported methods to do this: dual-booting (selecting which environment to use when you start the computer), or virtualization (running Windows as an OS X application).
For games, particularly ones heavily reliant on 3D graphics, dual-boot is currently the best option. This is accomplished using an application called "Boot Camp" (search the Apple site) to setup disk space for the two operating systems and installing a menu that appears when you boot where you can select which operating system to run. Any Windows game will run in this way (assuming you otherwise meet the hardware requirements of the game).
The alternative is virtualization, and there are two packages for that: Parallels and VMWare Fusion (in beta testing). Both will eventually support hardware accelerated 3D, but its not really functional in either yet. However, these applications run Windows as an application under Mac OS X, meaning that you can be running the Windows and Mac OS X applications at the same time (as opposed to Boot Camp, where you have to select at boot time which to run).
Note that all of the approaches require you to have a copy of Windows to install (preferably a legally licensed one). Most people don't have a copy to use since they receive a hardware-locked OEM version with their computer that isn't transferable.
The advice above is applicable to Linux as well. -
Remote and Testing Server Site Definitions
I am confused about what information I should put in my
remote site definition info and testing server FTC Host directory
text boxes. My host placed 3 directories: database, log, and www on
my server and Dreamweaver placed two directories, Connections and
_mmServerScripts in the same directory as the above 3. I have
placed all of my site files, including my home page and folders in
the www directory and my Access database in the database directory.
Dreamweaver placed the connection info in the Connections folder an
d _mmServerScripts in the same directory.
In order to construct my local site to match the remote site,
I created a www folder on my local site and placed all of my HTML
files and supporting folders in it.
From various Adobe Tech Notes I have read, I was led to
believe my FTP host directory
Should be www/. However, when I do this and create a new web
page on my local site and upload it to my remote site, Dreamweaver
creates a new www directory inside of the one my host created on
the remote site and uploads the file to it instead of placing it in
the www directory my host created. Also, when I use F12 to test my
page in my browser I get a 404 page not found because Dreamweaver
placed a www in the page URL that shouldn’t be there and
after I remove it I’m able to see my page in my browser. My
URL prefix on my testing server site definition is:
http://I.P.number.html.
What am I not doing right?
Should I use www/ as my FTP host directory or leave it blank?
Also, what should my URL prefix be?
Thanks for your help.What you need to do is set up so that in the remote server
you point to the
www level on the server, and don't replicate this locally.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Jim_Moore" <[email protected]> wrote in
message
news:[email protected]...
>I am confused about what information I should put in my
remote site
>definition
> info and testing server FTC Host directory text boxes.
My host placed 3
> directories: database, log, and www on my server and
Dreamweaver placed
> two
> directories, Connections and _mmServerScripts in the
same directory as the
> above 3. I have placed all of my site files, including
my home page and
> folders
> in the www directory and my Access database in the
database directory.
> Dreamweaver placed the connection info in the
Connections folder an d
> _mmServerScripts in the same directory.
>
> In order to construct my local site to match the remote
site, I created a
> www
> folder on my local site and placed all of my HTML files
and supporting
> folders
> in it.
>
> From various Adobe Tech Notes I have read, I was led to
believe my FTP
> host
> directory
> Should be www/. However, when I do this and create a new
web page on my
> local
> site and upload it to my remote site, Dreamweaver
creates a new www
> directory
> inside of the one my host created on the remote site and
uploads the file
> to it
> instead of placing it in the www directory my host
created. Also, when I
> use
> F12 to test my page in my browser I get a 404 page not
found because
> Dreamweaver placed a www in the page URL that shouldn?t
be there and after
> I
> remove it I?m able to see my page in my browser. My URL
prefix on my
> testing
> server site definition is:
http://I.P.number.html.
>
> What am I not doing right?
> Should I use www/ as my FTP host directory or leave it
blank?
> Also, what should my URL prefix be?
>
> Thanks for your help.
>
> -
Hi...
I am not really sure why "netflix" lead me to you at Apple unless my Iphone being plugged into my compt. had something to do with it?
But here is the problem:
I turned on one of 'netflix' movies, it took awhile and the following messege popped up:
*Not supported by Visual Machine.
New Graphics Drivers May Be Required.
Graphic Card Manufacturer: check with them.................which i did go to their web site and they were NO Help at all! ( i have a view sonic monitor, VG930m) they couldn't even find it...
The second paragraph read like this:
For Windows 8
Basic Display Adapter
Apple Boot Camp
Graphics Driver
The error code was at the bottom and read as follows:
W8156-C0262500
I am stumped,, I've worked on this for almost a week, and I'm getting no where... If anyone is able to help me out on this I would be ever so grateful as my mother who is 84 yrs old had a third massive stroke. I was trying to get this set up for her so she would be able to watch movies with me in the bedroom. Thanks in advance for taking the time to read this.... deb...http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
-
What burns me up about the Pixi (sprint)-If you can, help me out here
This is a half rant half 'I hope someone can help me out here with something I'm doing wrong' post, because my experience with this phone makes me want to smash it into a developers face. (Try not to take offence, it's just a thought, I am actually physically stuck with this phone)
Messaging:
No time stamps for messaging? With my pending civil court case, it'd be nice to have this rudimentary gem that's been on every phone since 1998. But let's be honest...it's just nice to know when what was said. Awesome that I can save every message for 3 months. Blows that I can't figure out when it was sent.
Missed Calls:
OK being that I actually like to think of my pixi as a phone first, then a "computer", I'd love to be able to sift through my missed calls on the red missed call alert bar. Since I'm too much of a, "let's get this done now" guy, I hate loading an app to get to my missed calls off of a little button on an already small interface. If I don't want to load the app, I have to click on the missed call alert bar, make my phone dial the number, end the call immediately, and continue untill I go through all of my missed calls (Yea I've done it before, I hate loading apps that bad). How about if you drag down on the missed call alert bar, it pulls the top one off and reveals the PREVIOUS missed call. (Holy ----! Am I a genius, or am I just someone who actually used this phone for more than 3 minutes?) Hopefully I can just sift through my calls on the messed call's red alert ball, but I've tried it every which way and I don't think I can...Help me out here.
SMS through missed call icon also only works when it wants to (software issue)
Airplane Mode: I accidentally put my phone into Airplane mode like twice a week. This blocks all calls and you just don't even know it's on until you notice the plane on the screen. Why is it so easy? Does palm not realize the consumer base that this phone makes it to probably uses an airplane once every year? I mean I've never even been on a plane and I got suckered into this thing, yet I feel like I should be able to have enough frequent flier miles to go around the world 6 times accoroding to how much I accidentally turn on Airplane Mode. Wth? Whose idea was that?
Facebook syncing: Seriously, who in their right mind wants every single one of heir FB friends on their phones? Certainly not me. Sorry I don't need to talk to all 400 people I've added from school. Best part is, once the syncing deed is done, you can't stop it. That's just brilliant. You spend an hour sycing your phone to FB, just to reset your contacts.
Ringtones: Text messaging ringtones literally plays for about 10 seconds and stop. Who on gods green earth told you that it'd be Ok to play any ringtone for like 10 seconds? Seriously...? PLEASE tell me I can change this. I can't even get through the intro of a song in 10 seconds. That's just great. May I add my ringer just seems to have shut off today. Why and when, I don't know. But my ringer is on, turned up, and I'm just getting text messages and calls as I type this with no sounds. lol Seriously. I'm not even kidding. I don't know how to make the alert sound. That's absurd. lol Like really I'm laughing at how pitiful it is that this is what my phone does so I'll just type another lol to further express how much of a joke this phone is to me. lol
Contact Reminder: Now I'm not sure what I'm doing. But pretty often, when trying to hurriedly dial a number, I accidentally hit contact reminder, load a new app. Meanwhile I have to get rid of the app and get to my phone. Now here's the kicker...I did it "hurriedly"(yea I make up words when I need to) which means I'm in a rush. Thx for not helping whatever situation I'd be in/have been in, Palm...You're supposed to work with me, not against me. :\
Calendar: Awesome app. I actually bought this phone for its uses here. But I'm not sure if it's just me, or the phone, but I can't even have this thing remind me to take out the trash every WEDNESDAY. From what I can tell, I can only do reoccuring reminders by date, and not by day. Seriously? If I'm not missing something here and that is the case, you've completely failed your name Palm. Just saying, I mean jeez...
Youtube: Now really. You almost outdid yourself with the youtube app. You could have made me forget of all of this phones shortcomings had you not just screwed up here too. Now I don't know who you have agreements with, but since I can't actually get the same vids I'd normally get on the computer (for example, music videos) to come up in my search, you've essentially turned youtube, "you"sless. Now that actually takes more effort in screwing up than not. This thing right here just makes me think you're trying to get me mad.
Small keys:Won't even touch on that subject, I should have noticed from the get go. I knew it, thought I'd get used to it, but no. They are just too small and that's that. Not even blaming palm for this one.
Palm taught me 2 things with this phone.
1: Never buy from palm again, we just don't seem to agree on what a phone should do. I had great expectations in the Palm name, only to find out that I'm going to be enraged by the phone daily.
2olidification in the notion that "if it's too good to be true, it probably is." Because that's exactly what I got out of the experience with this phone.
So unless someone can set my problems straight, I'm going to be looking foward to my next upgrade like it's the last day of school for a 12 year old. At least life won't continue speeding by as long as I have this thing. I guess that's one bonus. :\
The worst part is this is all that I can think of sitting here. I can probably edit this throughout any given day to make it into a small book. Which I would try to publish if I'm not flat out wrong about at least half of these "problems". Because if so...this phone should have never hit the market. No offense. Like I said, I actually have to use this phone. Palm just gets more money out of it.
Thx if you read, and thx if you help me out. I hope someone tells me what I'm doing wrong and makes me look like a complete idiot. This is your chance, defend palm!
Post relates to: Pixi p120eww (Sprint)Hi ChrisBell,
my Pixi shows me the missed calls in a list of its own? I don't have many, so maybe I'm missing something. But I agree with your half-ranting to some degree. As a long-time Palm-user (my last phone was a Treo 680, terrible form factor, good UI), I am really disappointed with the standard software on this phone. Memos and Tasks, which AFAIK were there and useful even on the first Newton's, have regressed beyond the point of usefulness now (solution: Toodledo and Done!, at least for now).
But ChrisBell: if you feel up for it, you could start tinkering. Many people love these phones so much they have started developing patches to solve the obvious problems skimmed over by developers. Try looking up "webosquickinstall" and "preware", and you will find over 300 patches and a lot of free software to help you out. I am not a computer wizard myself, but I am not scared of them either, and I have been able to make good use of all these extras made available by the community.
just a thought, might help you out on a few of your half-rants -
Regarding the wireless problem of my T60. Hope there is someone who can help me out. Thx.
I have read some of the posts and i found out that some of the Thinkpad users have the problem of unable to connect wireless network using Access Connection but not Window wireless network connection. For my case, i have connect the network with both of them. In fact, when i use either one to connect, the other would be connected too.
The problem is, sometimes when i use my wireless network, my wireless would be switched off automatically, and the wireless light is then off, and after that i cannot switched the wireless on again. I tried on it using access connection, failed. I tried Fn+F5 to on it, but no matter how many times i click on 'on', there would not be any response. The only thing i can do after this is to restart to laptop.
I called Lenovo Support to help me solve the problem, but still failed. The first time they asked me to installed some drivers and reinstall my Intel(R) Pro/Wireless 3945ABG Network Connection. These files included 79uj29us which is a bios update, 7kwc50ww which is the wireless driver installation, 7tvu12ww which is the hotkey driver update, and last 7tku03ww, a power management driver update. But the problem remains. The 2nd time i called, they asked me to uninstall my Access Connection and use window wireless connection as they may cause conflict to each other, and they asked me to uncheck the option of 'Allow this computer to turn off this device to save power' in the power management of wireless drive in device manager, but problem persists. The last time i called the technician and he said they only can check if it is a hardware problem and there most probably be nothing else they can do for my softwares and drivers, and he also believed that it might be the network configuration of my service provider that cause the problem, but i personally do not think so as it is quite hard to believe that the my service is switching off my wireless hardware and i have other laptop in my house too but they do not experience this problem.
Last night i discovered something new, when the wireless is off automatically again, i ran a test on the the wireless device using PC Doctor, for PCI express status test, it passed, for the wireless connectivity and signal strength test, results showed there was 'no connection', when it comes to network link test, it showed 'internal error', the TCP/IP network connection test showed failed. Then i restarted it and ran the test with the wireless switched off by my self, the PCI express status test passed too, but the remaining four test all showed 'no connection'.
I really hope if there is someone there to help me out to solve the problem or to enlighten me what the real problem is, could it be software or hardware problem, or could it be other problems like registry or what? I greatly appreciate if anyone can help me to solve this. Thanks alot.
Message Edited by cat_felix on 06-13-2008 09:54 PM
Message Edited by cat_felix on 06-13-2008 09:55 PM
Message Edited by cat_felix on 06-14-2008 04:15 AMI have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.
-
can someone please help me out!!!!
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Question
HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out? editThank you for posting your list of installed Extensions. One of them might be intercepting the menu command. Since you have the Add-on Compatibility Reporter, it's possible that an older add-on that doesn't actually work well with Firefox 5 could be to blame. Could you try disabling the "HP Smart Web Printing" extension and see whether that makes any difference?
Also, you can simulate a print button on a web site by pasting this to the location bar and pressing Enter. You also can save it as a bookmark for easier access (when scripts are saved as bookmarks, we call them bookmarklets). Hopefully you won't need it for long.
<br>javascript:void(window.print()); -
Is there anyone who can help me out in shopping cart creation by FM?????
Hi Guys,
I am trying to create a Shopping cart in SRM system executing the RFC from External system.I am trying hard to solve this issue since last 1 months and still i am not able to do that.plz help me out its very urgent now.
I am trying to use BBP_PD_SC_CREATE in combination with BBP_PD_SC_SAVE and Commit.
Here Below i am mentioning what all fields i using to pass the data, and what all errors i am getting after executing the function Module.
Please check it and tell me where exactly i am doing mistake.
FM ---> BBP_PD_SC_CREATE
I_REF_GUID 00000000000000000000000000000000
I_PARK X
I_SAVE X
I_HEADER
GUID 00000000000000
DESCRIPTION TEST
CURRENCY USD
PROCESS_TYPE SHC
I_ITEM
GUID 00000000000000000000000000000000
PARENT 00000000000000000000000000000000
NUMBER_INT 0000000001
NUMBER_EXT 0000000000
PRODUCT 00000000000000000000000000000000
DESCRIPTION MONITOR
CATEGORY 00000000000000000000000000000000
CATEGORY_ID 65.10
QUANTITY 1.000
UNIT EA
PRICE 1.00
PRICE_UNIT 1
GROSS_PRICE 1.00
CATALOG_PRICE 0.00
CURRENCY USD
PRODUCT_TYPE 01
LOGSYS_FI CFG300
BE_LOG_SYSTEM CFG300
BE_PLANT BUS1
BE_MOVE_REAS 0000
BE_PUR_GROUP W01
BE_PUR_ORG IBRD
BE_CO_CODE IBRD
BE_DOC_TYPE ECPO
BE_PACKNO 00000000
BE_INTROW 00000000
BE_PO_PRICE 1
I_ACCOUNT
GUID 00000000000000000000000000000000
P_GUID 00000000000000000000000000000000
DISTR_PERC 100.00
ACC_NO 0001
ACC_CAT CC
SRC_GUID 00000000000000000000000000000000
G_L_ACCT 500411060
BUS_AREA VTRS
COST_CTR 6589
SDOC_ITEM 000000
SCHED_LINE 0000
CO_AREA WBG1
PROF_SEGM 0000000000
CMMT_ITEM 500411060
FUNDS_CTR 6589
FUND BB
I_PARTNER
PARTNER_GUID 000000000000000000000000
P_GUID 000000000000000000000000
PARTNER_FCT 00000039
PARTNER_NO
ADDR_TYPE 1
ADDR_ORIGIN A
ADDR_NO 10735
PARTNER_ID 1058
same like i have passed 3 more partner details.
I_ORGDATA
GUID 0000000000000000000000000
P_GUID 0000000000000000000000000
PROC_ORG_RESP_ID 50000641
PROC_ORG_ID 50000640
PROC_GROUP_ID 50000641
When i execute it, i am getting error like
"Interface Data Contains error"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDDYN"
"Incorrect Interface Data for set PDFRT"
"Incorrect Interface Data for set PDHCF"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDORG"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTAX"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTOL"
"Incorrect Interface Data for set PDWGT"
"Enter Atleast one item for one limit"
Thanks alot.
GRTZ.
Regards,
Manoj TiwariHi,
before I would try to save a SC to the database, I would check how I have to fill the interface. Therefore I would suggest to read at first a SC from the database with FM BBP_PD_SC_getdetail. With this example of an existing SC you should be able to will the interface correctly.
E.g. when you check an existing SC with FM BBP_PD_SC_getdetail you see that some parameters are missing in your I_ORGDATA part. The I_ORGDATA part of my SC example looks like the following:
PROC_ORG_RESP_OT O
PROC_ORG_RESP_ID 92001699
PROC_ORG_OT O
PROC_ORG_ID 92000053
PROC_GROUP_OT O
PROC_GROUP_ID 92001699
Here you can see that you forgot the whole *OT parts! In your case the system doesn't know that you mean an orgunit.
As I mentioned above, when you know how a SC looks like on the database, it should be easy to fill the FM interface.
Best regards
Dennis -
Please help me out with embedding!
HI CAN ANYBODY HELP ME OUT. OUR TEAM IS WORKING ON A SITE N I
HAVE JUST CREATE A ANIMATION IN FLASH CS3 BUT WHEN I MAKE .SWF FIE
IT WILL NOT SHOW UP ON WINDOWS I THINK WE NEED TO EMBEDD FONTS.
PLEASE HELP ME OUT ASAP.tanya Verma wrote:
> HI CAN ANYBODY HELP ME OUT. OUR TEAM IS WORKING ON A
SITE N I HAVE JUST CREATE
> A ANIMATION IN FLASH CS3 BUT WHEN I MAKE .SWF FIE IT
WILL NOT SHOW UP ON
> WINDOWS I THINK WE NEED TO EMBEDD FONTS. PLEASE HELP ME
OUT ASAP.
>
Give us link to the problematic file so we can check it out.
Meantime - if you animate regular text and use STATIC font,
you don't need to embed
anything. Make sure text is not set to DYNAMIC.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Hi!
I just went thru the following exercise:
/people/james.guanzon/blog/2006/02/22/how-to-support-industry-standards-in-xi-part-i-of-iii--interfaces
/people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
/people/james.guanzon/blog/2006/09/09/how-to-support-industry-standards-in-xi-part-iii-of-iii--config-test
I have found that I can not successfully go thru the last link because it
has a lot of gaps.
If somebody can help straighten out the last link, I appreciate.
Is there any even simpler example for XI mapping/testing, for
different combinations , e.g. file to file, file to RDBMS, etc.
Points guaranteed. Thanks!Hi Jennifer,
you got a wrong understanding of mapping.
The kind of sender/receiver (file, DBMS, SOAP etc) is without any influence to the mapping.
Relevant is the structure the message was send.
Best is goto SAP help and exercise the mappings
http://sapdoku/netweaver4sp9/helpdata/DE/d2/58cd3b11571962e10000000a11402f/content.htm
Regards Mario
Maybe you are looking for
-
Where can I buy an external floppy disk drive for my Macbook?
where can I buy an external floppy disk drive for my Macbook?
-
Hi, I have a word document with a rich text content control that is mapped to a CustomXml. You can download an example here http://1drv.ms/1raxoUr I have looked into the specification ISO/IEC 29500-1:2012 and i understand that the attribute Target fo
-
Assignment Field - Accounting Document
Hi, The Accounting Documents generated from the Invoicing thru SD module, contain the reverse of the date in the "Assignment Field". The users now want this field to be used for putting the PO nos. Thus after creating the Invoice, in the accounting d
-
Determining Gaps in Logical Standby
DB version: 11.2 For determining the gaps for Physical Standby DB, I use the queries mentioned in the post below StandbyDB is not in sync with primary For checking if a Logical Standby and Primary is in Sync, Can I use the same query ? Do I have to c
-
Hello Gurus, we have a synchronous XI from HTTP Sender adapter to RFC. The user of the interface would like to call it using the plain HTTP adapter with HTTPS. When we use the http port with the XI user/password as part of the url, it works OK. When