Help me please about export file is .wmv

help me please about export file is .wmv from final cut pro
It have black side at right and left in clip when export finished
I have flip4mac program in my mac
How do I edit.

Let me help getting your question back to something we might understand.
- You are exporting your video AS .wmv
and
- when you export it, there are black bars left and right of the image.
How do you fix?
Ok - what was the format of the video prior to your exporting it? When you edited it in FCP, what were the sequence settings? That will help get the right settings for flip4mac.
CaptM

Similar Messages

Help with quality of exported files

The problem: I'm trying to get a good quality, 34 minute movie onto a DVD with chapter markers separating individual short films. This is supposed to be a compilation of 8 family movies, in addition to an introduction and credits at the end. Four movies are old movies made in iMovie and are .m4v files. Four were made in FCE earlier this year. I linked everything together in a Master Sequence, putting pauses in between each with some livetype text files to introduce each video. The m4v files were imported and placed in the master sequence. The others are nested sequences. I put chapter markers at the beginning of each section. My intention was to export this one master sequence as a quick time movie, then put it into iDVD.
It worked, but the quality was horrible! Everything became grainy, even the movies I had previously created in FCE. This was very disappointing. So I expertimented with a few things, and here’s what I found.
When I exported a quicktime movie, the quality degraded. It became grainy. Also, it changed the aspect ratio and stretches everything horizontally, as if to take a standard size screen and stretch it to a widescreen. It did this even with the original movies I had made in FCE. I don’t like building self contained movies using this mode because the file sizes are too big, so when I export I tend to use quick time conversion. In this case, I was hoping a non-self contained movie would merely point to all the original content and not add compression artifacts (or something like that). It turns out it made it worse.
When I tried to export a quicktime conversion, 640x480 VGA, best quality, H.264, the machine couldn’t do it. It ran for an hour or so and then crashed. Twice. That is for the entire movie. When I export individual clips (3-6 minutes) it works. The quality is good for movies made in FCE, not as good for imported m4v movies made long ago in iMovie, but better than what I get exporting quicktime movie files, either self contained or not. This is surprising to me, because I was expecting the export quick time movie command to produce the best quality. Also, I’m concerned that if I was able to create this, iDVD would not see any chapter markers anyway.
So there is a problem either way. Experimenting has led me to discover several questions/issues which need answering:
Issue #1: Why can’t I get a quick time movie of the same quality as what I see on the canvas, using the quick time movie export command? On a side note, the user's manual says something about a settings pop up menu where you can deselect the "recompress all frames" option. I can't seem to find this, and was thinking maybe that would help.
Issue#2: Why do m4v files which are very high quality in iTunes suddenly become poor quality when imported into a sequence? Seems to be an import problem, because the movies are already grainy when they’re on the canvas. I thought about making XML files and importing them that way, but the original project files in iMovie are gone.
Issue #3: Why do I end up with a stretched picture if I export quick time movies and there are mixed aspect ratio contents in the sequence (the m4v files are widescreen, the others are not)? More important, how to I get FCE to not do this?
Issue #4: When I export movies using quick time movie (not conversion), the grainy movies actually look better when played in VLC. They also look good when opened with FCE. How can I get that kind of quality in quick time, or at least in iDVD? Perhaps that would solve my problem.
Thanks for any help you can provide.
E

Thanks for the response. I’m not fluent with codecs or video compression, so this project quickly became more trouble than I expected.
It turns out the nested sequences are not H.264, the compression field is blank for the nested sequences. I double checked and the other properties are correct. Sorry about that. The other movies, though, (ones built in iMovie for iTunes) are H.264.
These four . m4v movies are in 960x540 and 480 x 272 because of the way they were exported in iMovie (Share -> Export Movie opens a menu with four sizes: Tiny 176 x 144, Mobile 480 x 272, Medium 640 x 360, and Large 960 x 540).
I just imported the final products (what was exported from iMovie) as clips into FCE. Sounds like I should not be doing that. The original media is on my computer, but not the iMovie project files, and for what I’m trying to do it’s just not worth the time to rebuild the movies in FCE.
Bottom Line: Here’s the current status of the project:
All eight of the movies, by themselves, play well in quicktime. I can put all of them on a DVD, and they still play ok. I wanted to string them all together in one sequence, with some transitions in between (creating a “Play All” option on the DVD). That’s why I nested the sequences, and imported the movies made from iMovie, than added chapter markers. Unfortunately, putting these different types of media together and asking the computer to make one sequence is creating a mess. So I’m sticking with Plan B and putting the movies on a DVD without trying to merge them into a single track.
A few follow up questions…
Out of curiosity, when you say “convert everything to QuickTime DV NTSC 720x480 at 29.97fps with 48k audio,” do you mean the original media (all of the bits of video and stills that came from the camera) or the edited sequences I’m currently working with? As a lesson learned, should I be changing properties of clips before importing them to FCE, so the source material has consistent aspect ratios?
The still images, though they are huge, show up with much better quality than the movies (which is expected, and I’m ok with). So I get a product which includes both video and still images, where the images are very sharp and the movie portions are a bit grainy (because they were taken on a small digital camera). If I change the size on the stills, won’t that just bring the still image quality down?
I’m still baffled at why using the export quick time movie command makes a video of lower quality than when using quick time conversion (in other cases as well, not just this project). In every case, I’ve got digital pictures and movies from my digital camera, and some text in FCE or LiveType files on top of that, usually with additional audio tracks.

Need help! please(about my phonelog)

Hello. i have an Nokia 6233. Some weeks ago i called someone(that i shouldn`t do) from my mobilphone. Afterwords i navigated to my log and deleted the logelement for the call i just did. I dobbelcheched it to make sure that the number no longer was on my "call log" or dialled numbers".
But when my girlfriend checked my phone the day after she still found out that i had called that number i shouldnt be calling and i got a lot of question that i didn like from here.
I just wonder how she found out that i had made the call when i had deleted the call from my log. Is there another place on my phone where this things is beeing saved? I Have tried to find out,but im all lost, and dont know what to do.
Hppe someone wants to help me....

Maybe she saw it on the bill?
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

This is driving me crazy!!! Help with first time exporting files from computer to MP3 Pla

Hello All.
I'd REALLY appreciate any guidance here. I bought a USB converter to USB 2. My computer does detect it, but I cannot find it when I go to the sources and go under my computer. All that comes up at that point is the A,C, and D dri'ves. When I go to my computer icon on my desktop it shows Creative Zen as on there. Does anyone have any tips on how to get the USB dri've to come up under sources?
This is so much work to be putting into just getting some music into this player!!!
Thanks so much.

Go to: My Computer/Control Panel/System/Device Manager. Scroll down the Device Manager menu until you see USB devices. If there is a yellow triangle beside one of them, you probably have to update the driver from the install CD that your USB 2 card came with.
Reboot and it should be OK.

Hi, Im new to Apple MacBook PRO. I have saved about 50GB files plus applications and message advises that my start up disk is almost full! My MacBook pro has a 500GB hard drive so don't know why this message is coming up. Please help.

Hi, Im new to Apple MacBook PRO. I have saved about 50GB files plus applications and message advises that my start up disk is almost full! My MacBook pro has a 500GB hard drive so don't know why this message is coming up. Please help.

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons

TS3694 I was doing the latest update (7) and when it got to exporting files it gave me error message 3194, need help please

I was doing the latest update to my iphone4. when it got to exporting files it gave me error 3194, can anyone help?

Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
This one comes close:
The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

I cannot download as I keep getting this when I try
Windows has the following information about this file type. This page will help you find software needed to open your file.
File Type: Firefox Browser Extension
File Extension: .xpi
Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
Please advise how I go about downloading

despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

Exported Files are ending up too Small and can't figure out why? Help please!

I'm Exporting files with no constraints - film scans (jpgs) starting at 10-12MB are exporting to 2MB-3MB files. RAW images are also exporting that small. I've tried at 240dpi and 300dpi with the same results. The original film scan jpgs are 8'x12" at 300dpi and they're ending up closer to 5"x8". Any suggestions?

BraedonF wrote:
the smart preview size was set at Medium and 5MB
You can't set smart preview size or quality (without a plugin) - it's fixed in Lightroom (e.g. size is 2560-).
The size/quality preference is for the "regular" (non-smart) previews.
BraedonF wrote:
After re-linking the files (no longer exporting from a smart preview), the file sizes when back to normal.
But you're right - if original is offline, and you therefore export a smart preview without resizing, it'll be 2560, not the full-rez of the original (unless original is smaller than 2560), and that'll account for over-small exports sometimes..

Help exporting files please

I am trying to export files from pages to my itunes account. How can I do this. I know the button on the bottom of the screen were you can choose this option the click which type of format I would like but I do not know how to get it off of itunes from my computer?

To start, did you export them did you use File > Export > All tracks to audio files or another method? Either way, the engineer should realize that even if they were showing audio on the left and right channel, they're still mono. The waveform is exactly the same on each side (they should look identical). Tell him to pick the left or right side, it doesn't matter.
ProTools will split them when he imports them anyways.

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Help Me Abt - IMP-00009: abnormal end of export file

when i try to import from dmp files the following error occured.
IMP-00009: abnormal end of export file
i don;'t know , why.
please help me.
Asif Iqbal
Software Engineer ( Karachi, Pakistan ).

Also, please make ensure you FTP the dump file in binary mode and compare the file sizes before and after the transfer.
Edited by: SKU on 12-Jan-2009 12:32

Extremely large jpg exported files - help!

I was previously loving LR3 - used the trial for a month, decided to buy it - had really no problems. The big issue for me is now the jpg export file sizes that are being created. I run all my photos through the develop module to adjust the basics as well as draw in masks, and previously I had no trouble exporting the files as jpg, with the limit of size at 600kb and resized to 960x640 (original photos from 5Dmk2 RAW).
Then I bought the license. From then on it seems that now whenever I do the same exact export it doesn't work! I also used to use the output quality slider and set that at 100% and would get around the same file sizes, but now I'm getting files 2-3x the size of the previous exports. All of the photos have minimal metadata (10 keywords or so, that's it) and the same metadata was present in the exports in the trial version.
Playing around with more export parameters and reading around on this forum led me to try and minimize exif data - this didn't even work - files could not meet the requirements or they still ended up 2-3x the size they used to be.
The interesting part is that when I would delete all development history and set the file back to the original pre-edited RAW and export there would be no problems!
Could it be possible that LR is adding the development data into the metadata that it is attaching to the photo??
This has completely shut down my photo workflow and really is making me regret buying this otherwise wonderful tool.

What I can see in the image is that it contains about (uncompressed) 750KB of XMP data, the major part of it relating to some "PaintCorrection" as follows:
PaintCorrectionWhat             : Correction
PaintCorrectionAmount           : 1.000000
PaintCorrectionActive           : true
PaintCorrectionExposure         : 0.439246
PaintCorrectionSaturation       : 0.000000
PaintCorrectionContrast         : 0.000000
PaintCorrectionClarity          : 0.457077
PaintCorrectionSharpness        : 0.000000
PaintCorrectionBrightness       : 0.361949
PaintCorrectionHue              : 240.000000
PaintCorrectionSaturation       : 0.000000
PaintCorrectionMaskWhat         : Mask/Paint
PaintCorrectionMaskValue        : 0.689655
PaintCorrectionMaskRadius       : 0.005442
PaintCorrectionMaskFlow         : 0.000000
PaintCorrectionMaskCenterWeight : 0.843964
PaintCorrectionMaskDabs         : d 0.689505 0.619480
PaintCorrectionMaskWhat         : Mask/Paint
PaintCorrectionMaskValue        : 0.689655
PaintCorrectionMaskRadius       : 0.005444
PaintCorrectionMaskFlow         : 0.000000
PaintCorrectionMaskCenterWeight : 0.843964
PaintCorrectionMaskDabs         : d 0.689871 0.605390
PaintCorrectionMaskDabs         : r 0.005443
PaintCorrectionMaskDabs         : f 0.0813
PaintCorrectionMaskDabs         : d 0.689749 0.607832
PaintCorrectionMaskDabs         : f 0.1519
PaintCorrectionMaskDabs         : d 0.689626 0.610275
PaintCorrectionMaskDabs         : f 0.1700
PaintCorrectionMaskDabs         : d 0.689590 0.612722
PaintCorrectionMaskDabs         : r 0.005442
PaintCorrectionMaskDabs         : f 0.1759
PaintCorrectionMaskDabs         : d 0.689635 0.615026
PaintCorrectionMaskDabs         : r 0.005443
PaintCorrectionMaskDabs         : f 0.1742
PaintCorrectionMaskDabs         : d 0.689530 0.612581
PaintCorrectionMaskDabs         : f 0.1726
PaintCorrectionMaskDabs         : d 0.689425 0.610137
PaintCorrectionMaskDabs         : r 0.005444
PaintCorrectionMaskDabs         : f 0.1709
PaintCorrectionMaskDabs         : d 0.689320 0.607692
PaintCorrectionMaskDabs         : f 0.1692
PaintCorrectionMaskDabs         : d 0.689214 0.605248
PaintCorrectionMaskDabs         : r 0.005445
PaintCorrectionMaskDabs         : f 0.1678
PaintCorrectionMaskDabs         : d 0.689104 0.602803
PaintCorrectionMaskDabs         : f 0.1460
PaintCorrectionMaskDabs         : d 0.688982 0.602615
PaintCorrectionMaskDabs         : r 0.005444
PaintCorrectionMaskDabs         : f 0.1525
PaintCorrectionMaskDabs         : d 0.689069 0.605061
PaintCorrectionMaskDabs         : f 0.1569
PaintCorrectionMaskDabs         : d 0.689090 0.607511
PaintCorrectionMaskDabs         : r 0.005443
PaintCorrectionMaskDabs         : f 0.1625
PaintCorrectionMaskDabs         : d 0.689100 0.609960
PaintCorrectionMaskDabs         : f 0.1652
PaintCorrectionMaskDabs         : d 0.689195 0.612399
PaintCorrectionMaskDabs         : f 0.1863
PaintCorrectionMaskDabs         : d 0.689113 0.610052
PaintCorrectionMaskDabs         : r 0.005444
PaintCorrectionMaskDabs         : f 0.1845
PaintCorrectionMaskDabs         : d 0.688940 0.607617
PaintCorrectionMaskDabs         : f 0.1839
PaintCorrectionMaskDabs         : d 0.688743 0.605185
PaintCorrectionMaskDabs         : r 0.005445
PaintCorrectionMaskDabs         : f 0.1916
PaintCorrectionMaskDabs         : d 0.688549 0.602753
PaintCorrectionMaskDabs         : f 0.1748
PaintCorrectionMaskDabs         : d 0.688555 0.604775
PaintCorrectionMaskDabs         : r 0.005444
PaintCorrectionMaskDabs         : f 0.1839
PaintCorrectionMaskDabs         : d 0.688622 0.607222
PaintCorrectionMaskDabs         : f 0.2225
This data results from heavy use of the local adjustment brush. Choosing "Minimize Embedded Metadata" upon export really should solve this problem for you. Please try again specifying this option.
But then, by doing so, you lose any other metadata (keywords etc.) also. To have complete control on what metadata gets written into the JPEG upon export, you could use Jeffrey’s “Metadata Wrangler” Lightroom Plugin.
I noticed one strange thing within the XMP data in your JPEG:
The data seems to be formatted differently than what I see with JPEGs I export ("HasExtendedXMP"), which I don't know where it comes from.
For further investigation, would it be possible for you to upload the Raw file and the XMP file belonging to it to somewhere (e.g. www.yousendit.com) and post a link to it here?
Beat Gossweiler
Switzerland

Help About Rex File No work in Logic !!!

am use Logic 7.2.1
The Rex File No Work In My Logic The Msg Problem ( What Kind Of File Is This)!!!!
please help what i can do.
Thank You.
2.0 Mac OS X (10.4.6) Logic 7.2.1

Help About Rex File No work in Logic !!!
am use Logic 7.2.1
The Rex File No Work In My Logic The Msg Problem ( What Kind Of File Is This)!!!!
please help what i can do.
Thank You.

HELP - Export Files from Data Set into Excel (CSV File)

Hello,
I was hoping someone could help me with adobe forms since this is the first time we have used this function at my work. We created an enrollment form, posted it online and 700 employees completed the form (with the submit button it came back to my email). I received all the forms and added them to the dataset in adobe. Now that my forms are complete, I have tried several options to export them into a csv file and it is not working properly. When I use the export button it only brings over 125 of the 700. If I export by clicking on forms>manage form data>merge files into a spreadsheet it brings them all over but is moving my information on some of the rows. For example, some names will be in the name column, some are under social security, etc. I need the exact answer under the appropriate column becuase I can't tell which plan employees chose. I would really appreciate if someone could help. I have searched and searched for the reason this is doing this but I can't seem to locate an answer. Is there another step that I'm missing? Does anyone know why my rows are shifting? We tried to test this before we used it and it seemed to work fine but we only used 5 files. Please Please Please Help Me! This enrollment file is due by tomorrow!
Thank You,
Mary

I've moved your post to the Acrobat Windows user to user forums. You might also want to consider the Adobe moderated Acrobat forums here:
http://www.acrobatusers.com/forums/aucbb/index.php
Kind Regards,
Michelle

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

Help me please about export file is .wmv

Similar Messages

Maybe you are looking for