Help me please... Airport
I have a simple question...
I have a iMac G5 with Built-in 54 Mbps AirPort Extreme Wi-Fi (802.11g),
I have too, a new Nintendo Wii,
I want my Wii to see Internet with my AirPort Extreme.
It is possible???
Do I need to buy a Base Station (Extreme or Express)???? or simply my AirPort Card in my iMac is enough?
I try for many hours to set (In the sharing setup) some adresses, the Wii see my Network, but cannot acess to internet...
Please... help me!!!
iMac G5 iSight Mac OS X (10.4.8) 2.1 GHz, 1.5 GB DDR2 SDRAM...
EtVlan, Welcome to the discussion area!
There have been several threads over the last few weeks from people trying to connect their Wii wirelessly to their Mac operating as a software base station. Unfortunately it appears that the Wii uses ports that are not available when the Mac is acting as a base station.
The solution is to use a true wireless base station instead of your Mac. You can use any 802.11b/g compatible base station. You can use an AirPort Express (AX), AirPort Extreme base station (AEBS), or an inexpensive 802.11b/g wireless router.
Similar Messages
-
I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?
Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem. -
Hi, I have Imac 10.8.5 and Aiport Express 802.11n wi-fi. I need a airport admin utility that I can't download. How do I do? Help me, please!
Welcome to Apple Support Communities
Your iMac comes with AirPort Utility (in /Applications/Utilities). You can open it from the Launchpad by going to the "Utilities" or "Other" folder -
HELP ME PLEASE. Computer not starting up!!!
Last night I tried to do a software update on my computer. There were 4 total updates (2 for the Airport, 1 for the iPod, and 1 for the Mac OS). After completing the updates for the Airport and for the iPod, the Mac stopped halfway while updating the Mac OS software. The computer requested a restart/shutdown for the updates which I proceeded to do.
However, the Mac did not shut down smoothly. It stayed frozen for a moment. I had to force it to shut down. Then when I tried to restart the computer, the Mac is left frozen at the startup (I see the grey Apple logo with the spinning progress indicator in the bottom).
The Mac has 2 accounts (my wife and I). She is the administrator and we usually do software updates while we’re in her account. Last night, I did the update while I was on my account. Do you think this has anything to do with it?
HELP ME PLEASE…………………..Vanan Murugesan,
Software Update (SU) normally works well but in your case it appears to have partially updated the System, leaving it a mismash of old and new components and hence unusable. As a personal preference, I never combine OS or security updates with other updates such as iTunes; I'll either use SU separately for the System update or download the stand-alone installer and bypass Software Update entirely.
Can you boot from your OS X Install disc / Restore DVD? (The actual disc name varies depending on what model Mac you have and what OS was originally installed on it --- you can add that info to your posts via the My Settings link under your username in the box on the right of the Discussions pages). Try using Disk Utility from the Installer menu of the Install disc to check the hard drive, as described in Using Disk Utility and fsck.
If the Mac boots from the Install disc, you can use your Tiger OS X Install disk to do an Archive and Install to reinstall the OS X System while retaining your user data and settings.
If that works, you can get the OS X updates not via Software Update but through the Downloads link at the top of the Discussions pages, searching for the stand-alone Mac OS X 10.4.6 Combo for PPC (or Mac OS X 10.4.6 Combo for Intel as the case may be). Note that the 10.4.6 update will restart the computer twice; this is expected. If your Mac is an Intel model, you may need to also refer to Firmware Restoration CD v 1.0.
I would certainly run Disk Utility> Repair Permissions while booted form the hard drive after you get things back up and running following the failed SU update.
Good luck! -
Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???
Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519 -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.
All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug! -
HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918 -
Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help
ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808 -
Hello again:
Please run my coding first, and get some view from my coding.
I want to add a table(it is from TableRenderDemo) to a JFrame when I click on the button(from DrawCalendar) of the numer 20, and I want the table disply under the buttons(from DrawCalendar), and the table & buttons all appear on the frame. I added some code for this problem(in the EventHander of the DrawCalendar class), but I do
not known why it can not work.Please help me to solve this problem.
Can anyone help me, please.
Thanks.
*This program for add some buttons to JPanel
*and add listeners to each button
*I want to display myTable under the buttons,
*when I click on number 20, but why it doesn't
*work, The coding for these part are indicated by ??????????????
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.GridLayout;
public class DrawCalendar extends JPanel {
private static DrawCalendar dC;
private static TestMain tM;
private static TableRenderDemo myTable;
private static GridLayout gL;
private static final int nlen = 35;
private static String names[] = new String[nlen];
private static JButton buttons[] = new JButton[nlen];
public DrawCalendar(){
gL=new GridLayout(5,7,0,0);
setLayout(gL);
assignValues();
addJButton();
registerListener();
//assign values to each button
private void assignValues(){
names = new String[35];
for(int i = 0; i < names.length; i++)
names[i] = Integer.toString(i + 1);
//create buttons and add them to Jpanel
private void addJButton(){
buttons=new JButton[names.length];
for (int i=0; i<names.length; i++){
buttons=new JButton(names[i]);
buttons[i].setBorder(null);
buttons[i].setBackground(Color.white);
buttons[i].setFont(new Font ("Palatino", 0,8));
add(buttons[i]);
//add listeners to each button
private void registerListener(){
for(int i=0; i<35; i++)
buttons[i].addActionListener(new EventHandler());
//I want to display myTable under the buttons,
//when I click on number 20, but why it doesn't
//work
private class EventHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<35; i++){
//I want to display myTable under the buttons,
//when I click on number 20, but why it doesn't
//work
if(i==20){ //???????????
tM=new TestMain(); //???????
tM.c.removeAll(); //??????
tM.c.add(dC); //???????
tM.c.add(myTable); //????
tM.validate();
if(e.getSource()==buttons[i]){
System.out.println("testing " + names[i]);
break;
*This program create a table with some data
import javax.swing.table.AbstractTableModel;
import javax.swing.table.TableColumn;
import javax.swing.DefaultCellEditor;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class TableRenderDemo extends JScrollPane {
private boolean DEBUG = true;
public TableRenderDemo() {
// super("TableRenderDemo");
MyTableModel myModel = new MyTableModel();
JTable table = new JTable(myModel);
table.setPreferredScrollableViewportSize(new Dimension(700, 70));//500,70
//Create the scroll pane and add the table to it.
setViewportView(table);
//Set up column sizes.
initColumnSizes(table, myModel);
//Fiddle with the Sport column's cell editors/renderers.
setUpSportColumn(table.getColumnModel().getColumn(2));
* This method picks good column sizes.
* If all column heads are wider than the column's cells'
* contents, then you can just use column.sizeWidthToFit().
private void initColumnSizes(JTable table, MyTableModel model) {
TableColumn column = null;
Component comp = null;
int headerWidth = 0;
int cellWidth = 0;
Object[] longValues = model.longValues;
for (int i = 0; i < 5; i++) {
column = table.getColumnModel().getColumn(i);
try {
comp = column.getHeaderRenderer().
getTableCellRendererComponent(
null, column.getHeaderValue(),
false, false, 0, 0);
headerWidth = comp.getPreferredSize().width;
} catch (NullPointerException e) {
System.err.println("Null pointer exception!");
System.err.println(" getHeaderRenderer returns null in 1.3.");
System.err.println(" The replacement is getDefaultRenderer.");
comp = table.getDefaultRenderer(model.getColumnClass(i)).
getTableCellRendererComponent(
table, longValues[i],
false, false, 0, i);
cellWidth = comp.getPreferredSize().width;
if (DEBUG) {
System.out.println("Initializing width of column "
+ i + ". "
+ "headerWidth = " + headerWidth
+ "; cellWidth = " + cellWidth);
//XXX: Before Swing 1.1 Beta 2, use setMinWidth instead.
column.setPreferredWidth(Math.max(headerWidth, cellWidth));
public void setUpSportColumn(TableColumn sportColumn) {
//Set up the editor for the sport cells.
JComboBox comboBox = new JComboBox();
comboBox.addItem("Snowboarding");
comboBox.addItem("Rowing");
comboBox.addItem("Chasing toddlers");
comboBox.addItem("Speed reading");
comboBox.addItem("Teaching high school");
comboBox.addItem("None");
sportColumn.setCellEditor(new DefaultCellEditor(comboBox));
//Set up tool tips for the sport cells.
DefaultTableCellRenderer renderer =
new DefaultTableCellRenderer();
renderer.setToolTipText("Click for combo box");
sportColumn.setCellRenderer(renderer);
//Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = sportColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the sport to see a list of choices");
class MyTableModel extends AbstractTableModel {
final String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
final Object[][] data = {
{"Mary ", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Chasing toddlers", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Angela", "Lih",
"Teaching high school", new Integer(4), new Boolean(false)}
public final Object[] longValues = {"Angela", "Andrews",
"Teaching high school",
new Integer(20), Boolean.TRUE};
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
* Don't need to implement this method unless your table's
* editable.
public boolean isCellEditable(int row, int col) {
//Note that the data/cell address is constant,
//no matter where the cell appears onscreen.
if (col < 2) {
return false;
} else {
return true;
* Don't need to implement this method unless your table's
* data can change.
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
if (data[0][col] instanceof Integer
&& !(value instanceof Integer)) {
//With JFC/Swing 1.1 and JDK 1.2, we need to create
//an Integer from the value; otherwise, the column
//switches to contain Strings. Starting with v 1.3,
//the table automatically converts value to an Integer,
//so you only need the code in the 'else' part of this
//'if' block.
try {
data[row][col] = new Integer(value.toString());
fireTableCellUpdated(row, col);
} catch (NumberFormatException e) {
JOptionPane.showMessageDialog(TableRenderDemo.this,
"The \"" + getColumnName(col)
+ "\" column accepts only integer values.");
} else {
data[row][col] = value;
fireTableCellUpdated(row, col);
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
private void printDebugData() {
int numRows = getRowCount();
int numCols = getColumnCount();
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + data[i][j]);
System.out.println();
System.out.println("--------------------------");
*This program for add some buttons and a table on JFrame
import java.awt.*;
import javax.swing.*;
public class TestMain extends JFrame{
private static TableRenderDemo tRD;
private static TestMain tM;
protected static Container c;
private static DrawCalendar dC;
public static void main(String[] args){
tM = new TestMain();
tM.setVisible(true);
public TestMain(){
super(" Test");
setSize(800,600);
//set up layoutManager
c=getContentPane();
c.setLayout ( new GridLayout(3,1));
tRD=new TableRenderDemo();
dC=new DrawCalendar();
addItems();//add Buttons to JFrame
private void addItems(){
c.add(dC); //add Buttons to JFrame
//c.add(tRD); //add Table to JFrameClick Here and follow the steps to configure your Linksys Router with Version FIOS.
-
in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?
Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian. -
Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.
Andrea...
You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
On the iPad tap Settings > General > Reset > Reset Network Settings
Then restart the iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you still can't download apps, the problem may be your Wi-Fi connection > iOS: Troubleshooting Wi-Fi networks and connections -
i just connected my ipod touch 4g to my laptop and there is an update 4.3.3 available i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!
Try a direct download:
iPod, iPhone and iPad Firmware Download
Manually install it by holding your "Option" key down when clicking on the "Restore" button in iTunes and select the firmware file you downloaded. -
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?
i have this problem too
my dad thinks its because itunes is getting overloaded
Maybe you are looking for
-
Itunes will not read Ipod Nano...
I just got an Ipod Nano for my Windows XP Dell Inspiron 8500. Installed the latest version of Itunes 5... and any 'latest' updated for Ipod software. (uninstalled/reinstalled SEVERAL times) Everytime I open ITunes, I get a message saying: "The softwa
-
I am using Nokia Lumia 820. I am getting error code c101b000 when updating software or apps. Since past few days i am getting this error code while trying to install the updates. The update download starts but when more than 50% download happens, the
-
Hi Professionals! I have a column field as "Age group" in a matrix. I want to sort the order in Ascending. I have given my column field values below in the expression which I have used in the column group properties --> sort but its not working. Can
-
6220 Classic and iSync (v3.0.2)
The current version of iSync (v3.0.2) is unable to sync with the 6220 Classic. Will a plug-in be made available by Nokia that will allow it to work properly any time soon? TIA
-
Send UI meassages from teststand sequence to Simple CVI Operator Interface with Asynchronous Timer
Hello, Is it possible and how is it possible to send UI meassages from a teststand sequence to the Simple CVI Operator Interface with Asynchronous Timer which could be downloaded from NI Hompage. I use this problems because it is more stable than the