Help me please!!!! this is deseperating!!!!
Hi,
I'm really dissapointed of Mac annd HP, I have looked at their online support but for some unknown reason they can't help me, I have followed all the informations the have in their websites but nothing works.
I have posted this before but none seems interested in helping me,
PLEASEEE!!! HELP!!!!! I am ****** off this mac.
Here we go:
Recently I upgraded my OS X form Panther to Tiger, and since then every time I cilck print using any Mac application, Fire Fox, Internet Explorer, Microsoft Excel, the application just quit sudenly, and a Appletalk pop up window appears asking me to report the error. The ONLY application that is working fine is Microsoft Word!!! Why???? What the **** is going on here?!! My printer is a HP LaserJet 2420dn, I connect via IP Protocol. I have installed the most recent driver downloaded from the HP website. I also have done all the suggestions people recommend in these forums, like Reparing Disk Permissions, Reseting Printing System, Restarting my mac, but nothing works!!
Again PLEASE!!!!! HELP!!!!!! this is frustrating!!!!!!!
I appreciate any advice,
Thank you!!!
iBook G4 Mac OS X (10.4.8)
You can try creating a test account and see if the test account has the same issue. If it doesn't then there is something corrupt in your user account.
Also you can try using the generic driver instead of HP's driver. I have seen issues where the generic driver prints more reliably.
Is this printer connected directly to your Mac via USB? Or are you using a network printer?
Similar Messages
-
Please help, someone please, this is a big issue
2nd g-thouch owner.................
ok, well I have been downlowding my songs, right, for about a week now. But i dont use itunes to get my songs,I use MP3 Rocket to get all my songs and then I put the songs that i got onto the itunes. well I did that, plus I put artwork on it, so it has a pic for the ipod touch
well now this week, when I put them on itunes and downlowed, and I went to find the artwork tab, it dident show the tab that i would be putting the artwork in,then when i try to find it, it seems like its not there any more. but I did with the rest of them that i have before, so now like 15 of my songs dont have artwork on it because it doesent show a artwork tab when I look for it, so now i dont want to keep doing this with my rest of my songs, because my ipod touch is basicly ment to have a artwork on it , because thats the most thing it can stand out
please help, i like to have someone that knows to fix this problem and knows what there doing please,
please help, i dont want this happinning with the rest of them.
please and ty
if you have any Q's regarding this Question please dont hesitate to ask, but if you know how to fix it, please please send me a postIf these are WAV files, there is no artwork tab because WAV files do not have artwork tags.
-
I run an itune 10.4 and would like to back up my entire library to a DVD, because I do not have an external hard drive to back it up to (as the "help" topic is suggesting). Is it possible?...and if so, can someone help me please.
This is no longer done via iTunes.
Use whatever CD/DVD burner software is installed on your computer.
Add the iTunes media folder to the list of files/folders to burn to disc. -
I buy app keynote but I Don't have serial number.Help me please.
I buy app keynote but I Don't have serial number.Help me please.
This means you have the iWork '09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.
-
Dv6809wm nvidia Ethernet Controller driver help me please.
My notebook is a dv6809wm. I am Korean, but also the This is South Korea.
After installing Windows 7, nvidia Ethernet Controller, driver can not find.
Windows xp, Vista, 7, installed it several times, nvidia Ethernet Controller driver can not find. Chipset nvidia 630a, installing, and even install sp37730, the Internet should not.
What should I do? You help me please.This used to be a sticky post but should have your answers. Install the AMD chipset driver for the dv65zz and higher AMD models. This is a Vista driver and may have to be run in compatibility mode but will provide ethernet functionality:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-Upgrade-Guide-for-dv6...
It is a long post but the AMD chipset driver is near the top. I see you already tried SP37730 and it is not working for you so you may have to do a manual install by pointing the driver installer to the subfolder where sp37730 unzips, containing the ethernet and make it take the ethernet driver .inf file.
You may also want to try one of these drivers:
http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html
Use the ones labelled: 3. "Special MCP65-67 nForce Driverpacks for Vista/Win7"
Post back if you need more help with this. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.
All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug! -
CAN YOU HELP?? (This is a long one, but please be patient and read it through before answering)
Basically, I screwed up my MAC in the terminal a few months ago. I don't know what I did, but it basically started erasing all the documents, data, bookmarks, extensions, literally everything from my desktop too. And I could not undo this.
Although, when I first got my laptop, I thought it would be a good idea to have different user accounts for different things (i.e. one user account for my personal life, one for professional life, one for school, etc). So after my documents and data and everything on my desktop started disappearing, I feared the worst and thought I messed up my entire laptop. Thankfully the entire hard drive wasn't affected---only one user account (called ALEX) was.
So instead of wiping the mac clean and having to start over (because I would lose all the data from my other user accounts), I decided to make another separate user account to replace the messed up one with. I named this new account "MARS" and made sure to set up the account as an administrator (just like all my other user accounts, save for the Guest account, of course) with all the permissions to make admin changes.
While still in the ALEX (messed up) account, and after searching forever online, I found that there was a way to change permissions of documents or even folders if they are moved into the "Shared" folder of another user account. Doing this would overwrite the permissions of that folder and all the sub-folders inside. I had a backup of the ALEX account on a Seagate Drive that had most of my itunes music (which is really the only thing I've been trying to get back--that and my bookmarks and chrome extensions), but I found that I couldn't simply backup one user account through time machine--I can only backup an entire computer hard drive.
Still in the ALEX account, I figured that I could instead solve my problem by transferring the documents and data from the ALEX BACKUP user account to the shared folder in the newly created MARS account, thus overwriting the permissions and getting all my old files back (all my old chrome extensions, documents, pictures, itunes music and movies, desktop, etc), now on the new account. Just one problem: I couldn't seem to open the new MARS user account (by going to Finder > Macintosh H.D. > Users > MARS) and thus, could not even get to the public folder and move the ALEX BACKUP files into the drop box at least.
So I switched users, logging into the new MARS account. I opened the Finder window, selected my Macintosh H.D., and opened the Get Info window for the hard drive. I went down to sharing and permissions, unlocked the little padlock to make permission changes, and added all admin users. I then proceeded to change the sharing and permissions to "read & write" for all admins, and selected "apply to enclosed folders" in the little gearbox settings icon (this is all in Get Info). It worked, and I was able to open all the folders from all of my user accounts, but now I couldn't open my own Home folder (the MARS folder in Users that is a picture of a little house), which was baffling to me because I was already logged into the MARS account.
Then I noticed a little padlock on my home folder (remember that I'm still actively in the MARS account), and also noticed that the Seagate external hard drive I had plugged in (which serves as a giant usb and a time machine backup disk) had the same little padlock. Now when I try to open the user account folder for MARS (either while logged into the MARS account, or logged into any other admin account) or if I try to open the external hard drive, I get this message that says "The folder can't be opened because you don't have permission to see it's contents."
So now, I can access all my user accounts from anywhere, but I can't access the new MARS account or my external hard drive anymore. So next problem on my list is solving the external hard drive issue. First I went into the Get Info window for the external hard drive, and tried to change the permissions there by unlocking Sharing and Permiss., and changing the settings for each user. Only all the users listed were set to "Custom" and even worse, every time I tried to change it, it automatically bounced back and reverted to "Custom." There was a little check box on the bottom that said "Ignore ownership on this volume" so I tried checking that box and doing the same thing. Also tried simply checking and unchecking the box. Still no luck.
Time for plan B: I went into disk utility and selected the external hard drive, then went to the First Aid tab. There were four options I could chose from: Verify Disk and Repair Disk (on the right), and Verify Disk Permissions and Repair Disk Permissions (on the left). First I immediately verified and repaired the disk and it said "The drive appears to be ok" after the repair was done. Then I tried to verify and repair the disk permissions, but I can't click on either Verify Disk Permiss. or Repair Disk Permiss. They are both greyed out and unclickable.
THIS is where I drew a line in the freakin' sand, did NOT read the Latin**, and decided to write this long-*** post in an attempt to find some kind of answer to my dilemma. So if anyone reading hasn't given up and you've reached this sentence with some kind of suggestion in mind, I would extremely appreciate any help I could possibly receive. I've been trying to deal with this situation for months now. Unfortunately my year of Apple Care has expired and I can't talk to any Geniuses in store on the matter, so if the internet is willing enough to help me, I promise to spend more time with it. Maybe even go back to MySpace. ****, I'll start using Google Plus if it means finding an answer. (You see the desperate lengths I'm willing to go to on this.)
**This is a reference to "Cabin In the Woods," when they're in the basement reading Patience's diary. Then there's a line written in Latin that basically brings zombie-redneck-torture-families back to life. Marty, who's been desperately trying to get them all to just go back upstairs, stops them and says, "Okay, I'm drawin' a line in the f*ckin' sand here; DO NOT READ THE LATIN." If you haven't seen "Cabin In the Woods," I definitely recommend it--it's a hilariously terrific thriller and even Sigourney Weaver shows up at the end.
Anyways if there's anyone out there who can help me, please!! (I've even got legendary weapons in Borderlands 2 I'd be willing to dupe as payment!!)
Please leave a reply, if you can. Or send me a message (not sure how this forum works, as I'm a little new to the forum).
And also, if your answer includes going into the terminal, I can tell you right now that I'll probably be extremely hesitant to go that route (seeing as trying to fix a problem using Terminal is what landed me in this entire mess, in the first place).
I really look forward to any help I can get. And thanks so much guys, you really make the mac community thrive by helping people out like this!I'd still prefer to keep separate user accounts. I never had any issues like this before. The only time I started having a problem was when I was just trying to force empty the trash a few months ago. I came on here looking for a solution and someone posted a way to empty the trash using the terminal. Before then, I hadn't used the terminal for anything--it was just another app in my utilities folder. (None of this has anything to do with having separate user accounts. Plenty of people with kids make second and third user accounts on their laptops so that multiple people can use one laptop, having more than one user on a laptop is not very difficult.) But thank you, I'll try that out and see if it works!
-
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
I am trying to learn HANA on my own.i have product id,product name,delivery date and Grossamount in my calculated view.i am trying to create calculated column where i need Grossamount in two columns based on delivery date.I have 2012 and 2013 as values for my delivery date.so i have created two column as grossamount_2012 and grossamount_2013.if i have delivery date as 4thdec,2012 i want the grossamount value to be in coloumn grossamount_2012 and the grossamount_2013 should be blank.i have written an expression like this
if("Deliverydate" <= longdate(2012-12-04),"Grossamount","0")
and it looks like this is wrong.i am getting the text Grossamount rather than values for that field in my output.so can anyone help me please?Hi chandra
i am trying to get the same result by using sql script and CE functions.i have written the following code
select A."PRODUCTID",
E."TEXT" as "PRODUCTNAME",
C."COUNTRY",
D."DELIVERYDATE",
Sum(D."GROSSAMOUNT") as "GROSSAMOUNT"
from "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.Products" as A
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.BusinessPartner" as B
on A."SUPPLIERID" = B."PARTNERID"
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.Addresses" as C
on B."ADDRESSID" = C."ADDRESSID"
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.Purchase.Item" as D
on A."PRODUCTID" = D."PRODUCTID"
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.Util.Texts" as E
on A."NAMEID" = E."TEXTID"
GROUP BY A."PRODUCTID",E."TEXT",C."COUNTRY",D."DELIVERYDATE";
this is working fine but i want to split the grossamount based on current year and last year.Any idea how to do this
In calculation view using script can we use if and case statements? -
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?
Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian. -
Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.
Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
My icloud activation lock is on my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.
Yes the phone belongs to me. It was purchased from United Kingdom Vodafone to West Africa, i had to factory unlock to use any sim in it. so it belongs to me. I did the activation myself, now after updating my iphone to the latest update, it required a user id and password to activate the phone, but anytime i enter the details, it tells me the user Id is not correct but the password is correct..
-
I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?
Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?
-
Hello Team,
I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
Process: iTunes [463]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.7 (10.7)
Build Info: iTunes-10702101~1
Code Type: X86-64 (Native)
Parent Process: launchd [273]
Date/Time: 2012-10-22 23:33:07.226 +0200
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report: 4918 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Anonymous UUID: 3DE933E2-7A48-4840-91F4-7DC466ED9C26
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x102a96000 - 0x103c36fff com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
0x7fff62696000 - 0x7fff626cb1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
Parallel ATA Device: MATSHITADVD-R UJ-867
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
Eagerly waiting for your response on this issue.
Best Regards,You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
Maybe you are looking for
-
Opening OA page in new window using Image Bean
Hi All, We have a requirement to open a new window in one of our application. It is working when I use a link but I am not able to achieve the same functionality with an image bean. Is it possible to achieve this using an image bean? Thanks in advanc
-
How can I get Firefox 26 to install on my computer. Because it won't.
I used to have Firefox 25. I tried to upgrade to version 26, but after I downloaded it and selected launch it went to a screen that said install. I selected that and then it went to a screen that had download on one side and install on the other. Whe
-
AppleID and iCloud passwords are separate?
I wanted to change the password I use for my iCloud email in the Mac OS X Mail app. I was directed to appleid.apple.com and changed it there. Logged out and in to test it... Success. However, the new password does not work in Mac OS X Mail. It will o
-
Selection-screen in subroutine
Hi, I would like to know if I can create my selection-screen using a subroutine. Here is my selection-screen. SELECTION-SCREEN : BEGIN OF LINE, COMMENT 1(45) text-aaa, POSITION 50. PARAMETERS : p_aaa TYPE rcgfiletr-ftappl OBLIGATORY. SELECTION-SCREE
-
Sorting the Values in Dropdown box values in dashboard
Hi, I have a small problem. In the dash board I have a drop down which will displays the list of the employess. How to assign the sort to this. I have checked all the option but in the web application designed I didnt find any option for it. Plea