Help me plese...vendor aging report
Dear Experts,
When i execute report S_ALR_87012078, it gives me short dump saying :
A PERFORM was used to call the routine "START" of the program "SAPMKCBR ".The current call contains 7 actual parameter(s),but the routine "START" expects 9 parameters.
Inside this report program GPDBALD1U1O2MD0JTFS2L4XWO8M
it is calling subroutine START by passing paramenter
PERFORM START(SAPMKCBR) TABLES B SP S0
USING G_S_SUMMLEV.
here parameter S1 is missing.
Now, how can i make changes to this standard report.
Please help me....
regards,
B.Siddhesh
Hi,
Generally aging report shows the items due by the vendor for specific dates, like for a month, 2 months, 3 months etc. As long as the item is in open status, the same will appear in the aging report.
There are SAP standard Aging reports which will give clarity
S_ALR_87012078 - Due Date Analysis for Open Items
S_ALR_87012083 - List of Vendor Open Items for Printing
'S_ALR_87012084 - Open Items - Vendor Due Date Forecast '
S_ALR_87012105 - List of Down Payments Open On Key Date - Vendors
F.41 - Open Items
You can select the fields as per your requirements to get into the details of the report
hope this clarifies
regards,
radhika
Similar Messages
-
Help me plz - Vendor Aging Report
Dear Experts,
When i execute report S_ALR_87012078, it gives me short dump saying :
A PERFORM was used to call the routine "START" of the program "SAPMKCBR ".The current call contains 7 actual parameter(s),but the routine "START" expects 9 parameters.
Inside this report program GPDBALD1U1O2MD0JTFS2L4XWO8M
it is calling subroutine START by passing paramenter
PERFORM START(SAPMKCBR) TABLES B SP S0
USING G_S_SUMMLEV.
here parameter S1 is missing.
Now, how can i make changes to this standard report.
Please help me....
regards,
B.SiddheshHi,
Generally aging report shows the items due by the vendor for specific dates, like for a month, 2 months, 3 months etc. As long as the item is in open status, the same will appear in the aging report.
There are SAP standard Aging reports which will give clarity
S_ALR_87012078 - Due Date Analysis for Open Items
S_ALR_87012083 - List of Vendor Open Items for Printing
'S_ALR_87012084 - Open Items - Vendor Due Date Forecast '
S_ALR_87012105 - List of Down Payments Open On Key Date - Vendors
F.41 - Open Items
You can select the fields as per your requirements to get into the details of the report
hope this clarifies
regards,
radhika -
Hi All
i am trying to get a legitimate vendor Aging report from within SAP
The 2 reports that I am currently looking at are:
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
But both these do not bring out the output the way i want it - and i tried changing the output control and it still doesnt bring out the report as i want it - I want a report like the S_ALR_87012178 for customers, with output control 1, 6 and a 0 - which gives me a logical list of the aged customers.
Is there one like this for vendors too? Any suggestions?
Thank you
RukshanaHi Ruksaana,
You can customize the vendor report to show the items overdue per vendor by using the following steps
1. Create a form using T Code - FKI4
In this form ( two-axis structure) provide the details for each column as per your Client requirement - Due from 0 - 30 days
etc. You can create a column (using formula method) at the end by adding the previous columns, this will give you total
amount of overdue items for each vendor
2. Create a report using T Code - FKI1
Based on the Form created in the above step. Make additional selections based on client requirements like document type,
company code, account type, currency etc. Execute the report.
The following link will give provides detail steps for the creation of the aforementioned form and report.
Re: AR aging report (summary by customer)
Hope this helps.
- Sadha. -
Hi all,
i have to prepare vendor ageing report.In that there is one exception that is if "no. of overdue days > 7 " color should be red.But here no. of overdue days can be calculated with the following formula as shown below.
no. of overdue days = query date(today's date) - orginal confirmation date.
but my query is there is no orginal confirmation date present in the infocube 0pur_c01 . how to get that ?
plz help me in this regards,
Thanx & Regards,
RaviChandraHi suman,
thanx for ur reply , but my question is how to get the orginal confirmation date from the cube 0pur_c01 , my requirement is to find the no. of overdue days.
no. of overdue day = today's date - orginal confirmation date.
Here we can get the today's date , but how to get the orginal confirmation date from the cube 0pur_c01 ,
I hope u understand the question.
Thanx & Regards,
RaviChandra
Edited by: Ravichandra.bi on Sep 18, 2011 7:32 AM -
I need a code for VENDOR AGEING REPORT
plz help me i am in urgent need of source code of
VENDOR AGEING REPORT.
if any body help me regarding this above report i will be
great ful to him/her.
bcoz deadline is today.
i need ur urgent help, i treid very much but i failed,
so hope help from anybody there.REPORT zvender_os NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65.
Tables
TABLES: bsik, "open items (A/C: Secondary Index for Customers)
lfa1, "customer master
lfb1,
rf140, "temp stru (Work Fields for Corrence(SAPF140*))
bsak, "cleared items (A/c Secnd Index for Cust(Clrms))
skat.
constants and variables
TYPE-POOLS: slis.
DATA: fieldcat TYPE slis_t_fieldcat_alv,
fieldcat1 TYPE slis_t_fieldcat_alv,
fieldcat_ln TYPE slis_fieldcat_alv,
layout_in TYPE slis_layout_alv,
layout_in1 TYPE slis_layout_alv,
sortcat TYPE slis_t_sortinfo_alv,
sortcat1 TYPE slis_t_sortinfo_alv,
sortcat_ln LIKE LINE OF sortcat,
eventcat1 TYPE slis_t_event,
eventcat TYPE slis_t_event,
eventcat_ln LIKE LINE OF eventcat,
col_pos TYPE i.
DATA: targ_month(2) TYPE n, "0001
targ_year(4) TYPE n, "0001
targ_mth_abs TYPE p, "0001
doc_month(2) TYPE n, "0001
doc_year(4) TYPE n, "0001
doc_mth_abs TYPE p, "0001
mth_result TYPE p, "0001
doc_days TYPE p,
targ_days TYPE p,
addl_days TYPE p,
ext_days TYPE p,
v_days(3) TYPE c,
v_kkber LIKE knkk-kkber.
DATA:
BEGIN OF inrec OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrec.
DATA:
BEGIN OF inrect OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrect,
BEGIN OF t_item OCCURS 1000, " 0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
zfbdt LIKE bsik-zfbdt,
dmbtr LIKE bsik-dmbtr,
days(3) TYPE c,
zuonr LIKE bsik-zuonr,
END OF t_item,
t_line LIKE t_item OCCURS 1000 WITH HEADER LINE, " 0001
BEGIN OF itab OCCURS 1000,
lifnr LIKE lfa1-lifnr,
total LIKE bsik-dmbtr,
zfuture LIKE bsik-dmbtr,
zcurrent LIKE bsik-dmbtr,
crbal LIKE bsik-dmbtr,
30days LIKE bsik-dmbtr,
60days LIKE bsik-dmbtr,
90days LIKE bsik-dmbtr,
99days LIKE bsik-dmbtr,
120days LIKE bsik-dmbtr,
180days LIKE bsik-dmbtr,
365days LIKE bsik-dmbtr,
bzirk LIKE knvv-bzirk,
vkbur LIKE knvv-vkbur,
vwerk LIKE knvv-vwerk,
vkgrp LIKE knvv-vkgrp,
klimk LIKE knkk-klimk,
cashd LIKE knkk-cashd,
grupp LIKE knkk-grupp,
erdat LIKE lfa1-erdat,
name1 LIKE lfa1-name1,
name2 LIKE lfa1-name2,
stras LIKE lfa1-stras,
ort01 LIKE lfa1-ort01,
telf1 LIKE lfa1-telf1,
psort(10),
sperr LIKE lfa1-sperr,
totsal LIKE bsik-dmbtr,
txt50 LIKE skat-txt50,
gsber LIKE bsik-gsber,
END OF itab.
DATA: sel_tab TYPE TABLE OF rsparams WITH HEADER LINE,
p_debit(1) TYPE c,
p_credit(1) TYPE c.
DATA: t_variant LIKE disvariant OCCURS 0 WITH HEADER LINE.
parameters and select-options
SELECTION-SCREEN BEGIN OF BLOCK blck0 WITH FRAME TITLE text-002.
PARAMETERS: stida LIKE sy-datum DEFAULT sy-datum OBLIGATORY,
p_bukrs LIKE t001-bukrs DEFAULT 'PIIL' MEMORY ID buk
OBLIGATORY.
P_BUKRS LIKE T001-BUKRS DEFAULT 'CC01' OBLIGATORY. "0003
SELECT-OPTIONS: s_lifnr FOR bsik-lifnr ,
s_vkbur FOR knvv-vkbur,
s_vkgrp FOR knvv-vkgrp,
s_bzirk FOR knvv-bzirk,
s_konda FOR knvv-konda,
s_kdgrp FOR knvv-kdgrp NO-DISPLAY ,
s_kvgr2 FOR knvv-kvgr2 NO-DISPLAY ,
s_kkber FOR knkk-kkber NO-DISPLAY ,
s_grupp FOR knkk-grupp NO-DISPLAY ,
s_ctlpc FOR knkk-ctlpc,
s_akont FOR lfb1-akont,
s_gsber FOR bsik-gsber.
PARAMETERS: p_future AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck0.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-002.
PARAMETERS: p_abs RADIOBUTTON GROUP zrad,
p_due RADIOBUTTON GROUP zrad DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck1.
*SELECTION-SCREEN BEGIN OF BLOCK blck2 WITH FRAME TITLE text-003.
*PARAMETERS: c_run RADIOBUTTON GROUP zrac DEFAULT 'X',
c_blk RADIOBUTTON GROUP zrac,
c_all RADIOBUTTON GROUP zrac.
*SELECTION-SCREEN END OF BLOCK blck2.
*SELECTION-SCREEN BEGIN OF BLOCK blck3 WITH FRAME TITLE text-004.
*PARAMETERS: p_debit AS CHECKBOX DEFAULT 'X' ,
p_credit AS CHECKBOX DEFAULT 'X' NO-DISPLAY,
*selection-screen end of block blck3.
start-of-selection.
START-OF-SELECTION.
PERFORM BUILD_EVENTCAT.
p_debit = 'X'.
p_credit = 'X'.
PERFORM get_customer_invoices.
filter records based on selection criteria
PERFORM filter_records.
END-OF-SELECTION.
PERFORM add_sort_field.
PERFORM modify_field.
PERFORM write_report.
*& Form FILTER_RECORDS
To collect all the required data from DB and store them in
internal table.
--> p1 text
<-- p2 text
FORM filter_records.
delete records based on selection criteria
LOOP AT itab.
SELECT vkbur vkgrp vwerk erdat konda kdgrp bzirk kvgr2
INTO (itab-vkbur, itab-vkgrp, itab-vwerk, knvv-erdat,
knvv-konda, knvv-kdgrp,itab-bzirk,knvv-kvgr2)
FROM knvv WHERE lifnr = itab-lifnr
ORDER BY erdat DESCENDING.
AKS :- Not Required for PI
CASE itab-vkbur.
WHEN 'SA1'.
itab-vkbur = 'SF25'.
WHEN 'QLD1'.
itab-vkbur = 'SF23'.
WHEN 'WA1'.
itab-vkbur = 'SF26'.
ENDCASE.
AKS.
EXIT.
ENDSELECT.
IF itab-vkbur IN s_vkbur AND
itab-vkgrp IN s_vkgrp AND
knvv-konda IN s_konda AND
knvv-kdgrp IN s_kdgrp AND
itab-bzirk IN s_bzirk AND
knvv-kvgr2 IN s_kvgr2.
ELSE.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE klimk grupp cashd
INTO (itab-klimk, itab-grupp, itab-cashd)
FROM knkk WHERE lifnr = itab-lifnr
AND kkber IN s_kkber
AND ctlpc IN s_ctlpc
AND grupp IN s_grupp.
IF SY-SUBRC NE 0.
DELETE ITAB.
CONTINUE.
ENDIF.
SELECT SINGLE skat~txt50
INTO (itab-txt50)
FROM lfb1 INNER JOIN skat
ON lfb1akont EQ skatsaknr
WHERE lfb1~lifnr = itab-lifnr
AND lfb1~akont IN s_akont
AND skat~spras EQ 'EN'.
IF sy-subrc NE 0.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE name1 name2 telf1 erdat stras ort01 sperr
INTO (itab-name1, itab-name2, itab-telf1,
itab-erdat, itab-stras, itab-ort01, itab-sperr )
FROM lfa1
WHERE lifnr = itab-lifnr
IF sy-subrc NE 0 .
DELETE itab.
CONTINUE.
ENDIF.
AKS For Filteration of Customer base on Block Area.
IF c_all NE 'X'.
IF c_run EQ 'X' AND itab-sperr EQ 'X'.
DELETE itab.
CONTINUE.
ELSE.
IF c_blk EQ 'X' AND itab-sperr NE 'X'.
DELETE itab.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDFORM. " FILTER_RECORDS
*& Form GET_CUSTOMER_INVOICES
text
--> p1 text
<-- p2 text
FORM get_customer_invoices.
DATA:ztotcre LIKE bsik-dmbtr.
DATA:ztotsal LIKE bsik-dmbtr.
DATA: fsdate LIKE sy-datum.
DATA: l_perio(4) TYPE c.
MOVE stida TO rf140-stida.
MOVE rf140-stida+4(2) TO targ_month.
MOVE rf140-stida+0(4) TO targ_year.
MOVE rf140-stida+6(2) TO targ_days.
targ_mth_abs = ( targ_year * 12 ) + targ_month.
CALL FUNCTION 'ZGET_PERIOD_FROM_DATE'
EXPORTING
i_date = stida
IMPORTING
e_perio = l_perio.
CONCATENATE l_perio '0401' INTO fsdate.
select open items.
IF p_due EQ 'X'.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
LOOP AT INREC.
IF INREC-SHKZG = 'H'.
INREC-DMBTR = INREC-DMBTR * -1.
ENDIF.
MOVE-CORRESPONDING INREC TO T_ITEM. " 0001
PERFORM COLLECT_INVOICE USING INREC-lifnr INREC-DMBTR
INREC-ZFBDT INREC-ZBD1T
INREC-ZBD2T INREC-ZBD3T.
APPEND T_ITEM.
CLEAR T_ITEM.
ENDLOOP.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
For Customers Credit Balance Transaction to be display in Report
End of Credit Balance
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT.
ENDIF.
ENDLOOP.
select cleared items
IF p_due EQ 'X'.
REFRESH inrect. CLEAR inrect.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
REFRESH inrec. CLEAR inrec.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
REFRESH inrec. CLEAR inrec.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT. " 0001
ENDIF.
ENDLOOP.
ENDFORM. " GET_CUSTOMER_INVOICES
*& Form COLLECT_INVOICE
text
-->P_bsik_lifnr text
-->P_bsik_DMBTR text
-->P_bsik_ZFBDT text
-->P_bsik_ZFBDT1 text
-->P_bsik_ZFBDT2 text
-->P_bsik_ZFBDT3 text
FORM collect_invoice USING pp_lifnr
pp_dmbtr
pp_zfbdt
pp_zbd1t
pp_zbd2t
pp_zbd3t
pp_ztotsal.
doc_month = pp_zfbdt+4(2).
doc_year = pp_zfbdt+0(4).
doc_mth_abs = ( doc_year * 12 ) + doc_month.
mth_result = ( targ_mth_abs - doc_mth_abs ).
logic given by Mr. Ashok Singhvi
doc_days = pp_zfbdt+6(2).
addl_days = ( doc_days - targ_days ).
IF addl_days <= 0.
ADD 1 TO mth_result.
ENDIF.
IF NOT pp_zbd3t IS INITIAL.
MOVE pp_zbd3t TO ext_days.
ELSEIF NOT pp_zbd2t IS INITIAL.
MOVE pp_zbd2t TO ext_days.
ELSEIF NOT pp_zbd1t IS INITIAL.
MOVE pp_zbd1t TO ext_days.
ELSE.
CLEAR ext_days.
ENDIF.
CHECK with Andrew whether this is working or not
if extended payment terms exist, subtract no of mths from mth_result
IF NOT ext_days IS INITIAL.
CASE ext_days.
WHEN 30.
SUBTRACT 1 FROM mth_result.
WHEN 60.
SUBTRACT 2 FROM mth_result.
WHEN 90.
SUBTRACT 3 FROM mth_result.
WHEN 120.
SUBTRACT 4 FROM mth_result.
ENDCASE.
ENDIF.
change to key date
IF pp_dmbtr > 0.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-crbal = 0.
itab-total = pp_dmbtr.
ELSE.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-total = pp_dmbtr.
itab-crbal = 0.
ENDIF.
itab-lifnr = pp_lifnr.
itab-totsal = pp_ztotsal.
COLLECT itab.
CLEAR itab.
ENDFORM. " COLLECT_INVOICE
*& Form ADD_SORT_FIELD
text
--> p1 text
<-- p2 text
FORM add_sort_field.
DATA: l_amount(9) TYPE n.
IF p_future = 'X'.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEif itab-zfuture > 0.
L_AMOUNT = L_AMOUNT - ITAB-zfuture.
CONCATENATE 'F' L_AMOUNT INTO ITAB-PSORT.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'I' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ELSE.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEIF itab-zfuture > 0.
l_amount = l_amount - itab-zfuture.
CONCATENATE 'I' l_amount INTO itab-psort.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'J' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDIF.
ENDFORM. " ADD_SORT_FIELD
*& Form WRITE_REPORT
text
--> p1 text
<-- p2 text
FORM write_report.
PERFORM build_fieldcat.
PERFORM build_sortcat.
PERFORM build_eventcat.
PERFORM build_layout.
PERFORM start_list_viewer.
ENDFORM. " WRITE_REPORT
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
lifnr
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'LIFNR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
Name1
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'NAME1'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'Name'.
APPEND fieldcat_ln TO fieldcat.
City Details
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'ORT01'.
fieldcat_ln-seltext_l = 'City'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Credit Limit
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'KLIMK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'CRBAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Cr. Bal.'.
fieldcat_ln-seltext_m = 'Cr. Bal.'.
fieldcat_ln-seltext_s = 'Cr. Bal.'.
APPEND fieldcat_ln TO fieldcat.
Total Amount
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-fieldname = 'TOTAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-seltext_l = 'Out.St.Amt.'.
fieldcat_ln-seltext_m = 'Out.St.Amt.'.
fieldcat_ln-seltext_s = 'Out.St.Amt.'.
fieldcat_ln-ref_tabname = 'zbsik'.
fieldcat_ln-ref_fieldname = 'ZDMBTR'.
APPEND fieldcat_ln TO fieldcat.
IF p_future NE 'X'.
Future
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZFUTURE'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Future Due'.
fieldcat_ln-seltext_m = 'Future Due'.
fieldcat_ln-seltext_s = 'Future Due'.
APPEND fieldcat_ln TO fieldcat.
ENDIF.
Current
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZCURRENT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Normal Due'.
fieldcat_ln-seltext_m = 'Normal Due'.
fieldcat_ln-seltext_s = 'Normal Due'.
APPEND fieldcat_ln TO fieldcat.
30 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '30DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '0-30 Days'.
fieldcat_ln-seltext_m = '0-30 Days'.
fieldcat_ln-seltext_s = '0-30 Days'.
APPEND fieldcat_ln TO fieldcat.
60 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '60DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '31-60 Days'.
fieldcat_ln-seltext_m = '31-60 Days'.
fieldcat_ln-seltext_s = '31-60 Days'.
APPEND fieldcat_ln TO fieldcat.
90 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '90DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '61-90 Days'.
fieldcat_ln-seltext_m = '61-90 Days'.
fieldcat_ln-seltext_s = '61-90 Days'.
APPEND fieldcat_ln TO fieldcat.
99 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '99DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '91-120 Days'.
fieldcat_ln-seltext_m = '91-120 Days'.
fieldcat_ln-seltext_s = '91-120 Days'.
APPEND fieldcat_ln TO fieldcat.
*120Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '120DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '121-180 Days'.
fieldcat_ln-seltext_m = '121-180 Days'.
fieldcat_ln-seltext_s = '121-180 Days'.
APPEND fieldcat_ln TO fieldcat.
*180 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '180DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '181-365 Days'.
fieldcat_ln-seltext_m = '181-365 Days'.
fieldcat_ln-seltext_s = '181-365 Days'.
APPEND fieldcat_ln TO fieldcat.
*365 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '365DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '>365 Days'.
fieldcat_ln-seltext_m = '>365 Days'.
fieldcat_ln-seltext_s = '>365 Days'.
APPEND fieldcat_ln TO fieldcat.
Last Payment Date
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'CASHD'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Street Name
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'STRAS'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Telephone
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'TELF1'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Credit Group
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'KNKK'.
FIELDCAT_LN-FIELDNAME = 'GRUPP'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
*Sales District
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'BZIRK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Distt'.
fieldcat_ln-seltext_m = 'S_Distt'.
fieldcat_ln-seltext_s = 'S_Distt'.
APPEND fieldcat_ln TO fieldcat.
Sales Office
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKBUR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Off'.
fieldcat_ln-seltext_m = 'S_Off'.
fieldcat_ln-seltext_s = 'S_Off'.
APPEND fieldcat_ln TO fieldcat.
Cust Creat Date
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'ERDAT'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT. -
Vendor ageing report data for all doc type needed(urgent)
hello everyone
once again i need ur help guys.
in the vendor ageing report i am getting data for only one document type and not of other.
ex- see i have two documents type-
1.KD 2. EJ
so i am getting data for document type KD only.
so how to get the data of document type EJ along with KD.
below is my code .
so tell what modifications i have to made .
*& Report Z_VENDOR AGEING *
*& in this repoet I am calculating the vendor ageing
which is depending on formula
AGEING = Current Date(or any date entered by user) Bline Date(BSIK-ZFBDT) *
REPORT z_vendor NO STANDARD PAGE HEADING
LINE-SIZE 200
LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
bukrs LIKE bsik-bukrs,
saknr LIKE bsik-saknr,
bldat LIKE bsik-bldat,
wrbtr LIKE bsik-wrbtr,
lifnr LIKE bsik-lifnr,
zfbdt like bsik-zfbdt,
zbd1t like bsik-zbd1t,
ageing type i,
END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
s_saknr FOR bsik-saknr,
s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt zbd1t
FROM bsik
INTO TABLE t_out
WHERE saknr IN s_saknr
AND bukrs IN s_bukrs
AND lifnr IN s_lifnr.
Loop at t_out.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = p_date1
i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
E_TAGE = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Modify t_out.
Clear t_out.
Endloop.
LOOP AT T_OUT.
IF T_OUT-SHKZG = H.
T_OUT-WRBTR = T_OUT-WRBTR * -1.
T_OUT-WRBTR = T_OUT-DMBTR * -1.
ENDIF.
DATA: TOTAL(16) TYPE P DECIMALS 2.
TOTAL = TOTAL + T_OUT-DMBTR.
Endloop.
LOOP AT t_out.
WRITE : / t_out-saknr,
t_out-lifnr,
t_out-wrbtr,
t_out-zfbdt,
T_OUT-DMBTR,
t_out-ageing.
AT LAST.
WRITE:/ TOTAL.
CLEAR TOTAL.
ENDAT.
ENDLOOP.
Message was edited by: sanjeev singhSanjeev,
Can you tell what is document type EJ representing...Secondly, if you check couple of documents of EJ type and check if data is available as per you WHERE clause filters.
Regards
Anurag -
I want to modify vendor aging report F.18.
HI gurus,
I want to add vendor name in vendor aging report f.18. I have copy std prg and make z prg and also put vendor name in internal table but in last that table's field getting clear so its not printing in report. So , if anybody knows then help.
Thanks in Advance,
Nainesh Patadia.I run this report but it show all details like vendor name etc
-
Creation of Vendor Aging Report in SAP BI.
Hello,
There is requirement to create the Vendor Aging report in SAP BI Cube.
In order to show the Aging of the Vendor in different buckets.
Can anyone help me out with the Links/Blogs/Wiki ... URL's .
I tried finding in net couldnt get anything related to this.
Thank you for the help in advance.
Regards,
AdhviHello Obaid,
Thanks for the reply.
got the URL for Vendor Aging Report ..which has better detailed information.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/b4e9503d6a4f39b66e67b1cedf41af/frameset.htm
0FIAP_M30_Q0003 not found in the BI Content
Creation of Vendor Aging Report in SAP BI.
Vendor Ageing formula
If you come across any further Customization of the Reports related to the Vendor ageing reports based on the URL mentioned below...let me know.
Thanks & Regards,
Adhvi -
Customized Vendor Aging Report
Dear Experts,
We had developed a customized Vendor Aging Crystal Report as on Date for one of our customer which is similar to SAP's Vendor Liabilities Aging, just a minor change we have been done in our report for calculating the due date of AP Invoice only for the document type as Item, from AP Invoice document date to GRPO's posting date.
So to build this report we had consider following transactions AP Invoice, AP Credit Memo, AP Down Payment Invoice, Outgoing Payment, Incoming Payment & Journal Entry and also we had concluded following scenario's:-
AP Invoice based on GRPO
Standalone AP Invoice's Item / Service.
AP Invoice adjusted against AP Credit Memo.
AP Invoice knocked off against Reconciliation.
AP Credit Memo based on AP Invoice
AP Credit Memo standalone Item /Service
AP Credit Memo adjusted against Outgoing Payment
AP Credit Memo knocked off against Reconciliation
AP Down Payment Invoice - Open.
Outgoing Payment - On Account
Outgoing Payment - Against Transaction.
Outgoing Payment - Direct Knocked off in Reconciliation.
Incoming Payment - On Account
Incoming Payment - Direct Knocked off in Reconciliation.
Journal Entry - Adjusted and Unadjusted
After considering all the possible scenario which do have impact with Vendor has been covered but still our report gets failed to tally with SAP Vendor Liabilities Aging Report on back dated date specially with reco happened transaction which get failed on comparison with Input parameter date against transaction date and reconciled date.
Please refer the attachment contains Store Procedure of this report. We would highly appreciate and thankful if some one could help us in optimizing our store procedure which could get tallied with SAP Vendor Liabilities Aging Report.
Many Thanks in Advance......
Regards
Krishna KumarHi,
Not able to open attached file. Please check these threads:
Vendor Aging Report SAP B1
Customer Receivables Aging - Query
Thanks & Regards,
Nagarajan -
Required Standard Vendor ageing report
Hi FI Experts,
I am SD Person, i have required Vendor ageing report, where we were see the vendor's due & non due out standing in mass up to perticular period.
Please help me.
Regards
BK GAIKWADHi,
Check with the following links.
Need standrad program for vendor aging report
Vendor Aging Report
Regards,
Radhika. -
Customer and Vendor ageing report by ItemGroup@%@#$%@#$??
Hi All
How do we get Customer and Vendor ageing report by "ItemGroup"?
I know there is a standard report in Business One which gives you the ageing report by Business Partner Group. But I dont know whether it is possible to get by "ItemGroup". Please help me and excuse me for weird requirement..
ThanksHi Gordon,
that query is actually designed for getting the purchase reports with all the excise and other tax related information per line item in the marketing document. my requirement is something different than this where the client wants to see the ageing report by Itemgroup.
Since ageing is based on the invoice due date it looks difficult to bifurcate the each individual line item, its group, its line total and their due date. means we should add all the open invoices' line items to be grouped with its total based on the due date. any other way to solve this?
thanks -
Vendor Ageing Report Through Report Painter
Dear All
As per my company requirement we are trying to develop vendor ageing report through report painter, by using library 8A4 (EC CPA: Drill Down Open Item), our requirement is all normal items and some special GL transactions (Not all) has to flow in this report.
In FKI4 / FKI5 if we assign any special GL, then data flowing in to report relating to that particular special GL transactions only, normal items are not flowing in to report. If we not assign any special GL then all normal and special GL transaction are flowing in to report.
Can anybody suggest how to restrict flow of some special GL transaction data in to report. Our requirement is all normal transaction along with some specified special GL transaction data has to flow in to report. Points will be rewarded on helpful answer.
Thanks & Regards
MadhavaHi Madhava
You can pull all values whether Sp GL or Normal GL values. For a particular 'Column' if you assign Sp Gl Indicator you will fetch all Sp Gl Values in that column. Same way in other column, you dont assign Sp Gl Indicator, instead you calculate manually as shown below;
In a similar fashion you can calculate all values for (00-30), (31-60) ...and so on.
Hope this clears all your doubts?
Regards
Abbas -
Customer & Vendor Ageing Reports
Hi
Can you please tell how can i get vendor and customer ageing report, Ex.Open items from 10-20,21-30,31-40 so on...
where i can get the report?
Mammu.Hi,
Customer aging report -
S_ALR_87012168
S_ALR_87012176
S_ALR_87012197
S_ALR_87012178 (open item aging analysis)
vendor aging report -
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_ALR_87012078 - Due Date Analysis for Open Items
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
hope this helps
regards,
radhika -
in vendor ageing report i am getting the data for the vendors with open item only means those vendors who have to pay depending on the parameter date which we r passing
in selection screen.
but i want all those records with cleared item also depending on that date.
means suppose there r 2 vendors
1.sanjeev-he has to pay 1000 but he has paid 500 and left
with 500 due.
2. amit -he has to pay 1000 and he had not paid anything till now.
so when i am executing my report it is showing only
sanjeev 500
amit 1000
but i need
sanjeev 1000
amit 1000
to be displayed but as sanjeev has already paid 500
so it is not showing the output as above.
so how it could be achievedhi sanjeev,
anver here.
do like this.
if has_paid < has_to_pay.
write has_to_pay.
endif.
rgds
anver -
Vendor Aging Report to show zero balance does not show all vendors
Hi all,
I would like to see a list of all my vendors in the Vendor Aging Report. I clicked on show vendors with zero balance, however, I still only get a partial list of the vendors. Is there a setting I need to set to show all the vendors? Any advice would be appreciated.
Thank you!
JaneHi,
I think your requirement is you want all vendors displayed irrespective of the transactions entered for that Business Partner.
The Aging Report will display only those BPs which have transactions posted to them.
The function of 'Display Vendors with zero balance' checkbox is that it behaves like a selection creteria and leads to inclusion
of all those Business Partners who do not have a balance as of the current date but had a balance on the selected backdate.
example :
If a vendor has a balance as on 01.08.08 and is paid on 10.08.08, then the vendor will not be included in aging report (when run on 01.08.08) unless "Include Vendors with zero balance" is checked.
This checkbox does not allow you to display all the vendors created in the database.
Regards,
Jitin
SAP Business One Forum Team -
Need standrad program for vendor aging report
Hi
Need standrad program for vendor aging report.
Please reply me only standrad programs.
Point are sure.
Regards,
kumarHi Pankaj
sorry to say that this is not my required program.
I need vendor aging report like s_alr_87012178 tc leads to customer aging report.
Thanks for your effort.
points are awarded.
Regards,
kumar
Maybe you are looking for
-
How to open two projects in the same time?
I have over 40 file project. Stadium. I am in finish of my work, but I forgot about something. I didn't notice that I lost a few keyfreme animation. I didn't realize that in 30 project and I am more over 40 right now. I made a lot of work and I can't
-
Using 4TB WD drives on M58p in Win/7 Pro x64
After taking advantage of Cyber Monday deals in December, 2013 for Western Digital WD4001FAEX 4 TByte drives, I suddenly was faced with the "32-bit MBR" issue on systems with normal BIOS (not UEFI) like my 7630 and 7483 M58p Small Form Factor PC's.
-
Report or Spreadsheet in a Form
Can you Generate Report, Excel of PDF Spreadsheet within a Form?
-
Hi all. I've trying to create indexes and i have a problem, the portal gives me the following error: 'Index could not be created; creating index failed: There are no active http servers known at the nameserver. (Errorcode 7218)' And when i try to loo
-
Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ?
Hi, Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ? please revert . I am not able to find the same in IMG. Thanks Srikant .