Help Me Problem Solve

I recently updated to the new version of itunes (7.0.2) and it recognized my nano but said it had 100 MB of memory and at the bottom the storage was -387 GB to 387 GB. I thought that it was an itunes problem so I went through the process to install the earlier version again. I was successful, but in the process i restored my ipod thus deleting all songs off of it.
I thought if I reset and hooked up to the new version it would work. To no avial..it still appears as the -387 GB to 387 GB when it should be 4GB. I also cannot put songs on it. I did manage to get a song on it on itunes but when I disconnect and search on the ipod it doesn't appear.
Any suggestions...frustration is leading my way.
Thanks!!
joeejojo

Try this.
Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
Choose something lower down the alphabet, say 'M' or something similar.
The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.

Similar Messages

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

Can you help me to solve this problem (user-exit for xd02)

Hi!
can you help me to solve this problem?
transaction XD02
To pass the length of the field to 7 max for KNA1-SORT (Search criterion 1 )
To pass the length of the field to 4 max for ADRC-SORT2 (Search criterion 2)
It is not possible to save the customer card as long as the search criterion is not univocal
I seek one to use-exit .
Thanks.

Hi,
Check the exit SAPMF02D.
Regards,
Surinder

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

Please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it.

Hello Experts Please help me to solve this problem.

Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.

Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael

Please help me to solve this problem.

Hi , can someone help me to solve the following problem:
1) I wrote two different client and server program, (Using UDP)
2) In the server side for testig I wrote some code like when a client sending message to server
a) server find on the database only senders IP address then server return the message to sender
b) Again if server find out other IP address too then it returns to them too
3) but it working for (a) , but not for (b)
4) Actually, its sending message but client not getting it
So, can some tell me, how to modify server or client side
Server wont reply the msg to the same IP address/ Sender who sent the message.
Server will reply the message to other person..
For example, Alace, Bob and Carrry are three clients. Alace, Bob, and Carry are online now. When they get online server save there IP address.
Now, Bob sends a message to server , then server will send the message to Alace and Carry. Not to the sender Bob.
Thanks]
I am giveing a pice of coding of server side
else
IPAddressObject addressObjectt;
onlineUserList.reset();
for(int i=0; i<onlineUserList.lengthIs(); i++)
addressObjectt=(IPAddressObject)onlineUserList.getNextItem();
IPAddress=addressObjectt.getAddress();
System.out.println("\n this is not same : "+IPAddress);
if(addressObject.compareTo(addressObjectt)!=0)
System.out.println("\n this is not same : "+sentence);
String cSentence=sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
System.out.println("\n aaaaaaa : "+IPAddress);
client.send(sendPacket);
else
System.out.println("\n this is same : "+sentence);
String cSentence= sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
client.send(sendPacket);
System.out.println("\n this is same : "+cSentence);
}//for
}//else
Edited by: kidylimp on Apr 8, 2008 12:16 PM

This looks suspiciously like a cross-post
[http://forum.java.sun.com/thread.jspa?threadID=5283608]

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

In the course of your troubleshooting to date, have you also worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

My Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

Carlos-
Start by signing out and back in to see if it will see the subscription:
How to sign in and sign out of creative cloud (activate/deactivate)
If the apps are installed fine and close after launch see this link:
CC applications close immediately after launch
If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise you on a solution
Pattie

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help me to

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
SN:F2*****FDR
<Edited by Host>

See the response in your other thread:
https://discussions.apple.com/message/24641427#24641427

HT4993 My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
<Edited by Host>

xinyi93 wrote:
My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
Yes, the iPhone 5S is a global phone. However, Sprint will only unlock phones for use on GSM networks outside of the U.S. In the U.S., that phone can only be used on Sprint's network.

ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.

ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.

what did you learn when you search the internet for iPhone error 14?

Help Me Problem Solve

Similar Messages

Maybe you are looking for