Help me publish/export CS3 Flash file as Quicktime Video, no controller

I am working on a simple timeline animation and would like to publish/export my flash file as a quicktime file with out the default controller. I can export it no problem with the controller. Also I tried publishing it as a QuickTime with Flash Track (.mov) and I get this error message. "QuickTime does not support Adobe Flash track beyond Flash version 5. You can however, export a QuickTime move with Flash rendered as video by selecting File > Export > Export Movie.
Also, does anyone know if transparencies are ok if publishing as a QuickTime movie?

QuickTime 7.3.1, and higher, no longer support Flash (.swf) in playback. Previous versions did allow .swf format as a muxed "track" if "Published" from Flash applications as version 5, or lower.
To turn off the controller (none) use the Movie Properties / Presentation tab.
QuickTime does allow levels of transparency and also "alpha channels" in most image formats that support them (.png).

Similar Messages

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

Flash for Mac "Quicktime Video" format question

I used Mac to create a video in Flash 8.0. When I export the
clip, i used "Quicktime Video" format (not the "Quicktime" option).
But when I play the file in Windows, I couldn't get it to open or
convert to other formats such as .AVI. Is there a codec for
"Quicktime Video" to work under windows XP? Please help.
Thanks.

Hi s2foster2, well I am certainly willing to try to help you, just don't know if I can be much help because I am not very
familiar with Mac. I was able to help a couple of people but that was due to them being able to send me screenshots.
I understand Flash Player but where programs, add ons, ActiveX Controls, even where the Flash files are located I don't know. I do know Mac has a Library:-)
Some new information has come to light tonight however, by one of our most helpful people on the forum. This was about
the 3rd party content, etc.
I looked at your FF add ons and you have the SWF and it's correct. Do you know where the Flash files are and could you
post back all of the Flash files with version numbers? That will tell me if Flash Player is installed with the correct files.
We can have a go at this if you want. I can tell you what info I need as long as you know where to find it, because I don't.
Let me know,
thanks,
eidnolb

Need Help To Extract Logo from Flash File .swf

I have an attached Flash file that is in
.swf format. There is a N64 logo within this file that I'm
trying to extract as a
.png with a transparent background. I've been able to open
it in a program called
Flash Decompiler Trillix and in the sub-menus it has the
logo listed as a frame.
This is about as far as I have gotten and I'm stuck. Perhaps
someone else knows how to do this a little easier. I just need to
find a way to extra the logo that already has a transparent
background and save it in
.png format.
Any help here would be hot." ;)
Logo Flash
File .swf

Hello,
I ran into a similar problem a few months ago. I have the
Sothink Flash Decompiler and what I did was turn the SWF back into
a FLA. I then opened it in Flash and then exported what I wanted as
a PNG image.
Decompilers can extract the actual image whether it be jpeg,
gif, png, etc. But when it's listed as a frame(as you mentioned
above) then the method above is probably the best way to get it.
Good luck

Need help: Problems with exported Dreamweaver html file in different browsers

I'm trying to send out a newsletter, and had our designer create it in Dreamweaver, and then export and html file which we uploaded. For some reason it looks wrong on Mac's, Gmail, and a few issues with Outlook. Does anyone know how to help with this, or had to work around this problem in the past?
I've attached our html file as well.
We're an eco startup with limited time and budget - so any help you have would be so appreciated.
Thank you!!

      World Centric Monthly Newsletter   August 2009
Palo Alto Joins the Ban Against
         Non-Recyclable Materials
       This Spring, Palo Alto joined the list of more than 30 cities and counties in California who are making good on their efforts toward reducing their greenhouse gas emissions
       by enacting partial or comprehensive bans on polystyrene (PS) foam and/or non-recyclable disposable foodservice containers. Around the same time, a California statewide ban on the use of PS containers was tabled before reaching the State Assembly floor. Representative
       Jerry Hill, one of AB 1358’s sponsors, pulled the bill due
       to concerns addressed in the Appropriations committee hearing of the bill, regarding the fiscal impacts which
       were not addressed in bill’s contents.
       Largely represented by the California Restaurant Association, opponents of AB 1358 lobbied legislative representatives and argued there would be a negative fiscal impact on struggling restaurant owners and their customers in order to accommodate the more expensive alternatives to PS containers.     There are the unquantifiable and “hidden” costs of contaminating our bodies and environment which would far surpass the fiscal impact on the plastics, restaurants and consumer industries. Studies published by the Foundation for Advancements in Science and Education have indicated that varying levels of styrene residues
         are present in 100% of all human fat tissue in the
         United States, as PS products are found to lose weight after in contact with hot or fatty/acidic foods and liquids, causing migration of the styrene into the food or fluid, ending up in the human body. On the high end, the levels were “one third of levels known to cause neurotoxic symptoms”. In the environment,
         PS is rarely recycled and does not biodegrade.     Supporting safer alternatives to polystyrene, in addition to the collection infrastructure and processing mechanisms for the compostable and recyclable products would help create more green jobs in the long run and would be a move in the right direction away from unnecessary harm
       to our health, our communities and our world. Keep your eyes open for a revised version of AB 1358 in Spring 2010!     For more information about polystyrene
       visit Earth Resource.     For a partial energy, emissions and water analysis
       of polystyrene and its alternatives visit our website.           World Centric Compostable
         Hot Cup Lid
         World Centric is pleased to announce we now offer a fully compostable hot cup lid that
         fits our 10oz, 12oz, 16oz,
         and 20oz paper hot cups.
       The lids can be ordered in cases of 1000 or packs of 100.
       For more information or to order, please visit our website.           This Month
         We’d Like to Applaud
       Project Open Hand
       San Francisco's non-profit
       organization that prepares and delivers food to seniors, people living with HIV and homebound critically-ill residents. For nearly 25-years Project Open Hand has been providing “meals with love” to local residents in need of help and care in
       California’s San Francisco and Alameda counties.
       Programs include meals, groceries and nutrition information as well as education and referral programs
       for all of the people served. A staff dietitian also visits several sites per week to speak with seniors and critically ill local residents about the importance of eating well
       and staying healthy.
       Project Open Hand continues to serve nearly 800,000 annually and has served as a model for over 100 organizations across the United States and the world.
       If you are interested in making a donation,
       please visit Project Open Hand.
       Help Project Open Hand continue to do what it
       does best – deliver quality food to those in need.
“World Centric has gone
           about every aspect of
           business in the most
           sustainable of ways.
           It is a model for socially
           responsible business.”
           Ari Patz
           Styrophobia
               Industry Trends
           Although PLA is a sustainable alternative to a petrochemical-
           derived product, its limitation has
           been not only its cost, but its inability
           to maintain structural integrity in hot temperatures and humid conditions because of its low melting pint.
           However, researchers at Teijin
           (formerly in partnership with Cargill)
           have improved their plant-based
           ‘Biofront’ PLA polymer to be able
           to withstand higher temperatures –
           by modifying its hydrolytic resistance.
         Get more information here.
               Get Great Deals!
               Check out our clearence items.
               Did you know?
           Styrene can leach from polystyrene.
           Over the long term, this can act as
           a neurotoxin. Studies on animals
           report harmful effects of styrene
           on red-blood cells, the liver, kidney,
           and stomach organs.
           US Environmental Protection Agency (1992) “Styrene”. Air Toxics Website.
               Where to Find us:
               CRRA Conference
               August 2 - 5
               Palm Desert
                      Western Foodservice
& Hospitality Expo
             August 30 - September 1
          Livable Green
             September 19
San Mateo
   Find us:            World Centric
2121 Staunton Ct. Palo Alto, CA
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.

9-scaling issue re-exporting from flash file

Hi,
I seem to have come across a consistent bug which is preventing me from progressing. I am creating assets in Flash which I am exporting as a swc file to be used in a Flex application. I have created a simple scrollbar thumb asset which is basically a rounded cornered rectangle and have added 9 slice lines to ensure the curved areas are outside of the scaling area. I convert the asset to a flex component and export as a swc file. When I test this asset in a simple swc inspector tool (built by one of the devs on my Flex project) I can manipulate the height and width and the 9-scaling works correctly. My problem occurs when I close the originating .fla file and close flash, re-open and without making any changes to the flash file re-export as a swc. When I do this the 9-scaling no longer works!
Has anyone experienced a similar problem? I am running a Mac with CS5 installed, any help would be greatly appreciated.
Thanks
Ed

Its been resolved. Thanks

Help with adding music to flash file

I'm working on designing a flash file that I will upload to a
web site I'm designing. I have original music that I want to upload
to it, but the sound is coming across as garbled. I ripped the
music off a CD so the file I am importing into Flash is .wav file.
The sound is fine when run my compueter, but it sounds aweful when
I import it into Flash. Can I add a .wav file to flash, or would I
be better off using an mpeg or mp3 file? Does it matter which type
of file I use to get the best sound quality?
Once I get the correct file imported to the library, how
should I go about applying it to the flash document? Should I
simply drop it into a new group of frames like I would any other
file, or is there a better way to implement it? I am not worried
about the user having control of it, in fact, I don't want them to
be able to turn off the sound.
Any suggestions and comments would be helpful, thanks

TDW1181 wrote:
> I'm working on designing a flash file that I will upload
to a web site I'm
> designing. I have original music that I want to upload
to it, but the sound is
> coming across as garbled. I ripped the music off a CD so
the file I am
> importing into Flash is .wav file. The sound is fine
when run my compueter, but
> it sounds aweful when I import it into Flash. Can I add
a .wav file to flash,
> or would I be better off using an mpeg or mp3 file? Does
it matter which type
> of file I use to get the best sound quality?
You can add wav file to flash, even preferred over mp3 file.
> Once I get the correct file imported to the library, how
should I go about
> applying it to the flash document? Should I simply drop
it into a new group of
> frames like I would any other file, or is there a better
way to implement it? I
> am not worried about the user having control of it, in
fact, I don't want them
> to be able to turn off the sound.
The bad quality is a result of compression you use for that
sound upon export.
After import, open the library CTRL L , right click the sound
and go to properties.
Try to change the mp3 export quality, use the TEST button for
immediate try, also monitor
the increase in file size at the bottom of the screen. The
better the quality, the
larger the file will be.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Help with editing a template flash file..

FIRST OFF..please don't shoot the noobee..I know some folks
don't like the templates and I appreciate that.
I have done some reading but not a whole lot about Flash. I
certainly don't want to BUILD a flash (not yet), but want to edit
one that is included in a template. I only want to edit the header
that drops down. It says The Web STudio. I, for example, want it to
say Marks Studio.
Ok..the temp comes with Flash/non flash.
I open w/flash and have a 3 folders: flash, psd and html.
-flash folder has Images, fla doc and one flash html file
-PSD folder has 3 psd files
-html folder has flash folder, images folder, css file and
one single index.html file.
I opened the flash folder and found the image.jpg I wanted to
change to Marks studio.
I opend the PSD and found the slice that is the same as that,
then edited it like I want it in PSD, then saved to replace the old
image. top1. jpg
Still, it is the same ole one that came with the temp.
as I said, please don't shoot the noobe. I just wanna edit
the flash file.
Thanks for any help.
Mark

You'd need Flash to edit the FLA file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"snipingkid" <[email protected]> wrote in
message
news:enev5r$p8l$[email protected]..
> Hey guys,
>
> I need some help with editing a flash template, I have
the .swf, .fla, and
> .html file of this thing, I would like however to edit
something on it....
> Ive
> tried everything, I have access to photoshop and
dreamweaver 8... Im not
> any
> good at it but with decent help I could get something
done. What I would
> like
> to edit is just text that flies in.... I would like to
edit the text, how
> do I
> do it.... Thanksj
>

Exporting 16:9 file to quicktime and importing to dvd studio pro

Please help I am using final cut 7. I just exported a Dvd anamorphic movie file to quicktime file. The completed file is a 4:3 where the anamorphic image is squeezed. When I import into dvd studio pro to burn a dvd it stays as a 4:3 file and is then being encoded as 4:3.
When I exported the file from final cut i used current settings ( as in my final cut audio video settings it is DV anamorphic)
How do I export retaining the 16:9 ratio?

In DVDSP, in the graphical view, click on the track to select it, and look at the the track inspector (menu View > Show Inspector). Make sure the track Display Mode is set to 16:9 Letterbox. This will play the track full screen 16:9 if played on a 16:9 TV, and will automatically letterbox it if played on a 4:3 TV.
MtD

Download Helper - How to download & save .wmv files WITHOUT the video being downloaded playing on screen?

Windows 7 Pro
Latest Version of Firefox
Latest Version of Download Helper
Windows Media Player and VLC are installed
When I download a video file (typically .wmv) the video begins playing on the monitor screen prior to my being able to use Download Helper to download the video and save to the hard drive. This typically results in the video stopping and playing and stopping throughout the download process because of the download speed available. There is never any issue with the final download on the hard drive.
Today I installed latest version of Firefox and Download Helper on another computer.
Windows 7
Latest Version of Firefox
Latest Version of Download Helper
Windows Media Player (only) is installed
Downloaded the same .wmv file downloaded above and the video did NOT begin playing on the monitor screen. Download Helper allowed me to download the file to the hard drive WITHOUT constantly listening to the video start/stop/start/stop etc.
What option (in which program) would allow the playing of the video to be toggled on or off while downloading the .wmv file?
Thank you.

Once the download has started, you can go to another web page. The
download should be a separate function.

Exporting I-movie file to Quicktime

Hi, when I try converting an i-movie file to quicktime on a external Hardrive or when trying to drag a quicktime file between external hardrives I get an error code -36 message. Can anyone share with me what this is about. I also get a message saying "you cannot copy the item "icon" because the name is too long or includes characters that the disk cannot display.

It seems as your external hard drive is formatted for PC.
iMovie: How to Save Projects to Another Hard Disk
http://docs.info.apple.com/article.html?artnum=93296
See "Important Considerations" at the bottom.
Disk Utility Help: Erasing a disk or volume
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1009.html
In step 4, DO choose Mac OS Extended (Journaled).
WARNING: All your currect files will be erased.

How to export/watch .avi files using Quicktime Pro

Hi there.
I've got Quicktime Pro and I'm trying to convert .avi files so I can play them on my iPhone. I open up the .avi file in Quicktime and then slect the Movie to iPhone option.
It will take about 20 mins or so, but when I open the file all I get is a white screen even though the timer is showing that the movie is playing.
I can't even watch .avi files using Quicktime as all I get is a black screen.
Could someone please help?
Thanks

Thanks, but unfortuntately that didnt work. MPEG Streamclip couldn't play any of the .avi files, it still came up with a white screen while playing.
I tried this with a number of .avi files but I had the same problem.

Exporting MPEG 2 files with audio & video tracks COMBINED?

I want to post a film on Google Video. I'm told they like MPEG2 files, but with the audio and video combined.
How can I create an MPEG2 with the video and audio combined?
I've also been told I can change the .m2v extension to .mpg after I've encoded, without causing problems. Their 'uploader application' doesn't like the .m2v extension.
Thanks,
Ben

Compressor's standard mpeg2 export presets are set up to create separate audio and video files. Changing a m2v extension to mpg does nothing. You still have a file with only video.
However, deeper in Compressor is the means to create muxed (mixed audio and video) files. Do a search here, it has been discussed a few times.
Still, why not send them an mpeg4 file?
x

Exporting to .mp4 file using QuickTime Pro

Rather than use the Movie to iPod preset in QuickTime pro, I would like to export an .avi file to a .mp4 file using Movie to MPEG-4. I would like the resulting file to be encoded using h.264 video and to be 640 X 480. I want one file that I can include as an enclosure in the rss feed for my podcast that can be downloaded and played in both iTunes and on an iPod. So far, I have been able to create a .mp4 file that plays in iTunes/QuickTime but not on an iPod.
Would someone with experience in this please tell me which settings to use in the MPEG-4 export settings dialogue so that I get a file that can be played on the iPod.
The options are:
File Format (I chose mp4)
dropdown (I chose video)
Video Format (I chose H.264)
Data Rate (I know it's important that this not be too high but don't know what to put.)
Optimize For (download is the only choice for this option)
Image Size (I chose 640X480 VGA)
Preserve Aspect Ratio checkbox (My original video is 720X480. I don't think I should check this. I want to change the pixel aspect ratio to square pixels.)
using dropdown box (Letterbox, crop, fit within size) (only active when Preserve Aspect ratio is checked)
Framerate (I chose 29.97, which is the frame rate on the original .avi file)
Keyframe ( I set this to every 15 frames)

Thanks. I was aware of that information. But still am stuck on using QuickTime Pro to come up with a usable .mp4 file for the iPod. I think I am using the right settings, but it's still not working. That's why I included a lot of detail about the specific options in my question. Hopefully, there's someone out there who has used QuickTime Pro for this.

When export imovie 6 file to quicktime it freezes

What causes it to freeze when exporting imovie 6.0.3 files to quicktime?

Hi
I would open the iMovie HD6 movie project (icon with a Star on it - opens by ctrl-click on it and select Show package/Content)
Here I find
• three folders and two documents
• The folder - Shared Movies - contain two folders (at least) - GarageBand and iDVD
• iDVD folder contain a QuickTime ref movie moviename.mov (eg My fantastic movie.mov)
This I open in QuickTime Pro and Export as self-containing in any format I like.
(The QT.mov in iDVD folder is a ref document = very small and containing no movie at all - but able to create one from by Exporting in QuickTime)
Yours Bengt W

Help me publish/export CS3 Flash file as Quicktime Video, no controller

Similar Messages

Maybe you are looking for