Help me set fingerprint function on phone

how can I set speed dial?

This is the iPod touch forum. I requested your post be moved to the iPhone forum

Similar Messages

Nokia 6300 - NEED HELP WITH SETTING UP MMS ON PHON...

I recently bought a new Nokia 6300. Can anybody please help me on how to get mms function activated on my cell phone.

Just go to this site below & select your phone model.
http://www.nokia.com/phonesettings
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

HT201472 can you guys please help me find my ipod because i lost it a week ago and i cant find it i've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway here my

can you guys please help me find my iPod because i lost it a week ago and i cant find it I've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway or somehow because my iPod i love it i would always take pictures with my friends and i have all my memories in it so i don't know where it is for all i know it could be on the street getting ready to get ran over because the last time i ever saw it was on last Sunday when i went to my cousins house when we were leaving i grabbed something to eat then i sat at the table then i left but i swear i had it in my pocket when i left but i didn't so i asked my cousin if he could look for it and he said sure so he started looking for it but didn't find anything and so i lost it sense and i asked my dad if i could get a new one and he said in a couple of years but i want that iPod back it has all my memories in it it's really special to me and i'm really desperate so please help me someway somehow anyway just help me please i don't know what else to do but beg for someone to help me because I've tried looking for it in my car in my room in my coats and nothing i tried looking for it on the website find my iPhone/iPod/iPad and it didn't help so please help me i beg of you if you are reading this and don't care you really are heartless because a little 12 year old girl can't find the most precious thing she got from her father 1 year ago and if you are reading this and you have a heart please help me find it if you do want to help me find it****
<Personal Information Edited by Host>

You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

HT1766 I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.

HT201371 In the next ios update, could we get the fingerprint function to unlock the phone and open up different apps in one swipe, using different fingers for different apps?

In the next ios update, could we get the fingerprint function to unlock the phone and open up different apps in one swipe, using different fingers for different apps?

This is primarily a user-to-user support forum. Following is a link for feedback/suggestions to Apple: http://www.apple.com/feedback/

HT5570 I tried to reset setting due to my phone speaker are not functioning except if i plug in earphone.after i key in my phone code,it promp a request for restriction code which i totally cant recall.

I tried to reset setting due to my phone speaker are not functioning except if i plug in earphone.after i key in my phone code,it promp a request for restriction code which i totally cant recall.how can i resolve this issue.

Hello Ridhuan,
Thanks for using Apple Support Communities.
If you forgot your restrictions passcode you will need to restore your iPhone to its factory settings.
i forgot my passcode
https://discussions.apple.com/thread/5196099
Take care,
Alex H.

My right ear headphones won't work on my iphone 4s. I restored the iphone and set-up as new phone, this made the right ear headphone work fine. But as soon as I restored the iphone from back-up it stopped working. Pls help

My right ear headphones won’t work on my iphone 4s. I restored the iphone and set-up as new phone, this made the right ear headphone work fine. But as soon as I restored the iphone from back-up it stopped working. Pls help

Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Help to set activepath on my function

Hello guys,
Chinnadk helped me with this function
my question is..
I wonder how do I add a default path so each time the File.openDialog comes up it navigastes to ("C:/test/xxx example")
see my function below
function copyfiles()
var _files = File.openDialog("Select indesign files","*.indd",true),
TargetFolder= Folder.selectDialog("Select the target folder"),
_parent = _files[0].parent.toString().replace(_files[0].parent.parent,"");
new Folder(TargetFolder+ _parent).create();
var filenames = "";
var txtfile = new File(TargetFolder+ _parent + "/myFileLog.txt");
for(var i=0;i<_files.length;i++)
_files[i].copy(new File(TargetFolder+ _parent + "/" + _files[i].name));
filenames +=_files[i].name + "\r";
txtfile.open('w');
txtfile.write(filenames);
txtfile.close();
//txtfile.execute(); öppnar textfilen
//#include "/Kommuni/LaRe/LareAUTO/341542/scripts/interface/scripts/KABPDFExport_1.jsx"
// $.writeln(myFile.displayName); // just for write the data in console
thank you in advance
All good Adobe Members!
Cheers

Hi,
Cause we are on the scripting forum let me comment this a little...
Well, sometimes the only thing you can say is the one Pi Patel said to the tiger in the middle of the ocean - BE PATIENT!
Predefined paths was a subject of your last posts:
active path and function
If mFolder is some place you want to start a dialog tree-view - mFolder.openDlg() works in the same way.
Jarek

Problem in Adhoc Query's set operation functionality.

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

How do I set up a second phone on one computer and iTunes

I am in the process of getting a second iPhone 5, to help separate my work and personal life. But can't seem to find any information in how to set up a secondary phone.
It will be with the same mobile phone carrier, but will have a different phone number. Am I able to have a secondary phone on the one iTunes account, and if so how do I do it?
Or will,I need to set up separate users on my MacBook Pro, and have another identity to achieve this?

Read here:
http://support.apple.com/kb/HT1495

Touch ID does not work for ONLY MY fingerprints on my phone?

I'm on an iPhone 6 Plus 64gb running iOS 8.3. I have tried many things to resolve my issue, I have restarted the phone, deleted fingerprints, restored my phone, and everything else the apple support team has told me to do.
About a week ago, Touch ID became very hit and miss, I deleted the print, and when trying to redo my fingerprint it would not recognize it. I tried all of my fingers, from here, I reset the phone, restored the phone, and then had a friend do it. They had no problem registering their fingerprint and unlocking my phone, but mine doesn't work at all. However, on other peoples phones, I can register and use Touch ID flawlessly. I made sure my fingers are try and that the iPhone screen is clean.
Can anyone help? Apple tried to replace it, but if it works on other people, it must not be the hardware!

KC7GNM wrote:
Did you follow the directions on adding your fingerprint? You have to do it from different angles and not the same way everytime while adding a fingerprint.
This information is not correct. You do not have to enroll a finger with different angles. Properly enrolled, a finger will unlock from any angle, thru 360 degrees...

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

I have restored my new iphone 5 but everytime i plug it back into iTunes i am asked if i want to set up a new phone. Which i have already done!!

I have restored my new iphone 5 but everytime i plug it back into iTunes i am asked if i want to set up a new phone or restore it. I have already set it up and tried to restore it again thinking this might help but i still keep getting the same message. The phone is recognised and shows up in devices but i cannpt sync apps or anything to it.

Have you updated your iTunes on your computer? WIth a device running iOS7, you need iTunes 11.
When you removed iTUnes, did you see something named 'apple mobile device support' or something like it? (The exact name varies from operating system to operating system). If you see that, uninstall it too. That's the drivers for your iPhone and they should self-install when you plug your device in.
If all that is fine, have you checked your cable and USB port? a malfunctioning cable can keep you from syncing.

Problem overloading "set data" function on Button DataGrid Renderer

Hi all, I'm hoping this is something simple.
I have a class that extends mx.controls.Button and implements mx.core.IDataRenderer. I need to set the button icon whenever the Data property is set from the DataGrid. My problem is that my overloaded set/get Data function are never called (I've stepped through the code in debug). Instead the set/get functions in Container.as (Flex 3.4 SDK) get called.
Here's the basics code:
exportButtonRenderer.as
package controls
    import flash.events.Event;
    import flash.events.MouseEvent;
    import mx.controls.Button;
    import mx.core.IDataRenderer;
    import mx.controls.dataGridClasses.DataGridListData;
    import mx.controls.listClasses.BaseListData;
    import mx.events.FlexEvent;
    import mx.controls.Alert;
    import model.descriptors.compDescriptor;
    import events.exportClickedEvent;
    public class exportButtonRenderer extends Button implements IDataRenderer
        //    embed your icons
        [Embed(source='/assets/icons/export.png')]
        [Bindable]
        public static var imageExport:Class;
        [Embed(source='/assets/icons/blank.png')]
        [Bindable]
        public static var imageBlank:Class;
        public function exportButtonRenderer()
            super();
        private var _listData:DataGridListData;
        override public function get listData():BaseListData
            return _listData;
        override public function set listData(value:BaseListData):void
            _listData = DataGridListData(value);
        private var _data:Object;
        override public function get data():Object
            return _data;
        override public function set data(value:Object):void
            _data = value;
        override protected function clickHandler(event:MouseEvent):void
            super.clickHandler(event);
Now I know I'm using the Flexlib TreeGrid and not a standard DataGrid but when I trace through all the code all code firing the set/get functions is coming from the DataGrid anyway.
Here's the my Grid def in my main app mxml:
Header 1
<flexlib:TreeGrid
        id="MKTXGrid"
        dragEnabled="false" sortableColumns="false" showRoot="false"
        disclosureClosedIcon="@Embed(source='/assets/icons/arrow_right.png')"
        disclosureOpenIcon="@Embed(source='/assets/icons/arrow_down.png')"
        folderOpenIcon="@Embed(source='/assets/icons/psd.png')"
        folderClosedIcon="@Embed(source='/assets/icons/psd.png')"
        click="MKTXGrid_clickHandler(event)"
         doubleClickEnabled="true" doubleClick="MKTXGrid_doubleClickHandler(event)" left="0" right="0" top="0" bottom="16">
    <flexlib:columns>
            <flexlib:TreeGridColumn dataField="Name" headerText = "Name" minWidth="200" width="200" editable="true"/>
            <mx:DataGridColumn dataField="ExportName" headerText = "Export Name"/>
            <mx:DataGridColumn dataField="Export" headerText = "Export" width="50" minWidth="20" resizable="false">
             <mx:itemRenderer>
                <mx:Component>
                    <mx:Box horizontalAlign="center" width="100%" verticalScrollPolicy="off" horizontalScrollPolicy="off">
                        <controls:exportButtonRenderer label="Export" icon="@Embed(source='assets/icons/export.png')" width="12" height="12" useHandCursor="true">
                            <controls:click>
                                <![CDATA[
                                    import events.exportClickedEvent;
                                    var e:exportClickedEvent = new exportClickedEvent();
                                    e.itemData = data;
                                    dispatchEvent(e);
                                ]]>
                            </controls:click>
                        </controls:exportButtonRenderer>
                    </mx:Box>
                </mx:Component>
            </mx:itemRenderer>
            </mx:DataGridColumn>
        </flexlib:columns>
    </flexlib:TreeGrid>
Nothing too special going on.
I know this can be done, I've seen examples in the SDK:
http://opensource.adobe.com/svn/opensource/durango/trunk/ExternalFlexTools/com/dougmccune/ containers/accordionClasses/AccordionHeader.as
By the way I've stepped through the code of the TreeGridItemRenderer class in Flexlib which works correctly and the class def starts like this:
TreeGridItemRenderer.as
import flash.display.DisplayObject;
import flash.display.InteractiveObject;
import flash.display.Shape;
import flash.display.Sprite;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.geom.Point;
import flash.geom.Rectangle;
import flexlib.controls.TreeGrid;
import mx.controls.Image;
import mx.controls.dataGridClasses.DataGridListData;
import mx.controls.listClasses.BaseListData;
import mx.controls.listClasses.IDropInListItemRenderer;
import mx.controls.listClasses.IListItemRenderer;
import mx.core.IDataRenderer;
import mx.core.IFlexDisplayObject;
import mx.core.IToolTip;
import mx.core.SpriteAsset;
import mx.core.UIComponent;
import mx.core.UITextField;
import mx.events.FlexEvent;
import mx.events.ToolTipEvent;
import mx.events.TreeEvent;
import mx.managers.ILayoutManagerClient;
import mx.styles.IStyleClient;
public class TreeGridItemRenderer extends UIComponent
                                  implements IDataRenderer,
                                               IDropInListItemRenderer,
                                             ILayoutManagerClient,
                                               IListItemRenderer
Any help would be great!

That's because you put your component in a Box. The DataGrid is setting the Box's .data property and no code is setting the one on your component. You shouldn't really need Box. You can override updateDisplayList to center your Button instead.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Vendor Master- Mass change to set block function 02 for selected PurchOrg

Hello,
We are using SAP 4.7.
We want to do Vendor Master- Mass change to set block function 02 (T code- MK05 in block for quality reasons) for selected Purchasing Organizations to approximately 2000 number of vendors. I tried this using mass maintenance (T code XK99), but in this case block function of all purchasing organisations gets changed. We want it for certain purchasing organisations only. Kindly suggest the solution.
In case I have to go for a development can you please suggest any functional module/ BAPI?
Can I achieve this using mass maintenance functionality (XK99)?
Waiting for your expert openion,
Regards,
Milind Dumbre

Using the block function in XK05 will block the vendor for all purchasing organizations (as mentioned in the documentation of the field). What you can do is to use purchasing block for the selected purchasing organization.
The field is LFM1-SPERM, and this can be done via mass maintenance using XK99.
Hope this helps.
Regards,
Aroop

Help me set fingerprint function on phone

Similar Messages

Maybe you are looking for