Help me smooth out my lighting.

What Setting do I need to change to smooth out the edges of my lighting in this shot, and get rid of those hard edges?

I presume you're talking about the banding in the transition from dark gray to black. There's only so much you can do, because there are so few values of gray being spread across a much higher number of pixels.
The first thing to do: work in 32 bits. It'll help even if you eventually render out to an 8 or 10-bit codec.

Similar Messages

Noise like a bee, no noise when light dimmed down, who kann help 2 find out why?

noise like a bee, no noise when light dimmed down, who kann help 2 find out why?

0   com.apple.CoreFoundation                0x95185ea6 CFNumberGetValue + 38
1   com.zedonet.pde.PRDX                    0x03f38ea6 MyGetTicket + 102
2   com.zedonet.pde.PRDX                    0x03f33a3c MyInitialize + 188
This is what's causing the crash, and it sounds related to PrintFab.
From googling, it looks like removing /library/printers/ppd plugins/printfabpde.plugin will get rid of the crash, but I don't know if that will make the driver unusable.
Hope this help.

I am using apple iPod-suffle model and I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution

I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to smooth out discontinuous spacial distribution gradients

Hi all.
I'm controlling a linear motion device, and need to generate displacement paths for it to obey. What I'd like is to smooth out the 'sharp edges' in my profile data (for example, at points where it may go from a slow forward motion to a faster forward motion). Technically, this is removing the discontinuities in the spacial distribution differential, but in other words all I need to do is "smooth my data".
I've mimicked what I want to achieve by putting some hand-created numbers into this graph -->
The yellow line is my original profile data. You can see that I'll be moving the device from position 45 at time 0 to position 52 at time 5 and finally position 53 at time 9. This is fine, but I'd like to smooth out the motion a bit and avoid that nasty elbow at time=5 a bit.
The blue line is what I'd like. A smooth run from position 46 at time 0 to position 53 at 9 seconds, that preserves the velocities (gradients of the profile line) at the beginning and end. The reason for this is that the motor will arrive at position 46 (time 0) at the velocity inferred by the first gradient, and will continue beyond position 53 after time=9 at the speed inferred by the end gradient. Therefore I must not change the gradients of the line at the beginning and end.
I've tried using the many Signal Filtering techniques LabVIEW has available, but I've found that they create problems:
1. They don't preserve the beginning and end gradients, and
2. They tend not to like the very few sample points I have here. (If I interpolote the yellow line to create intermediate points, the filtering works better, but still suffers from point 1)
I've tried using the B-Spline curve fit, but that seems also not to respect the gradients.
I've tried the cubic spline fit, but that doesn't return the extra points I need to create the blue curve the way I've shown here.
Does anyone have any advice? I thought this would be simple, but I'm a bit stuck now but I suspect that there'll be someone out there that's had to do this too.Naively I expected there to be a simple function called "Smooth Data", but clealy not.
Many thanks in advance for any responses received.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

In my copy of Haliday Resnick and Walker there was a note that talked about Einstein and "working in divine issolation" where he was not distracted by others telling what was leagl and what wasn't. I recall that note when I propose idea like the following that some math type will tell me has not physical meaning and dismiss it off-hand. But since I don't limit myself to what is allowed or legal...
See this thread starting a post #5.
Summary:
CC's best attempt at smoothing the curve was shown in this plot.
Using my non-legal technique, I got these results.
I a nutshell:
When yo ufilter you loose data at the front and back-end with the number of points of data loss being determined by the order of the filer. By first pre-pending and appending the same data set reflected about the first and last point, we trick math into telling us what it woudl refuse to tell us otherwise.
maybe this will help you,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to smooth out zooming/scrolling image that jerks (CS4)?

Hi guys/girls,
Is there any way that i can smooth out images that zoom in/out with normal classic tween. they are so jittery it looks terrible. I even have a little bit of easing and frames per second set to 30.
any info much appreciated!
Jeff

Hi flashfever,
thanks for responding. can you elaborate on how i can use that? is it AS for the 1st frame or on the movie clip itself? etc
in this case, i have the image fading in and enlarging from 70% to 100% in the same tween. its very jerky.
thanks for your help so far!
Jeff

Smoothing out "slider" or "dolly" shots

Looking for some help smoothing out camera slider shots. They are "side to side"( as opposed to straight in) and show some vibration during the move. I have tried reducing the vibration in Motion but the analysis constricts the video on the X axis and bunches the video to one side. This leaves a blank/ black canvas showing on half of the project. Any help with preserving the "move" while reducing the vibration/ camera shake?
thanks in advance...

If you're using the Stabilize behavior, restrict the direction to the vertical only.
Andy

I recently deleted two albums off of my iphone via itunes but, they are still showing up on my phone, they are not albums that i have purchased through itunes, can someone help me figure out how to delete them please?

I recently deleted two albums off of my phone using itunes, but when i went back onto my phone, they were still there and playable. they are not songs that I have purchased via itunes so can someone please help me figure out what is wrong so that i can fix the problem

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

HT6154 Can someone please just help me figure out how to update this stupid phone without losing anything? I somehow have more than one Apple ID on this,but I just want my music and my pictures to stay and I'm terrified of losing these things.

Can someone please just help me figure out how to update this stupid phone(iPhone 4)without losing anything? I somehow have more than one Apple ID on this,but I just want my music and my pictures to stay and I'm terrified of losing these things. I have a lot of music from old CDs on here,and for some reason I can't even transfer them manually onto my computer. I'm not tech savvy whatsoever. Someone please help,having my music is the the whole reason I still have this phone.

First read about back http://support.apple.com/kb/ht1766
Then read on how to transfer photos to your computer http://support.apple.com/kb/ts3195
Then
UPDATING iOS
Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using wireless http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848

HT1933 I make a purhase on March 6 at 11:33 Order number MHOXX3TK9J for $1.99 and my credit card was charged $20.00 can you please help me find out why this happened

I made a purchase on itunes on March 6 at 11:33 order umber MHOXX3TK9J for 1.99 and my credit card was charged $20.00 please help me find out why this happened.

Contact iTunes support at the link below.
https://ssl.apple.com/emea/support/itunes/contact.html

Can someone please help me figure out how to "clear" recent email addresses used in Mail?

Can someone please help me figure out how to “clear” recent email addresses used in Mail? For example, as I begin typing a name/email address in the “To:” field, Mail begins suggesting addresses that I’ve previously used. I don’t want any suggestions unless they are in my contacts.
Another example: When using MS Outlook, it will also remember and suggest email accounts previously used, but I can arrow down and delete an account from the list so it won’t automatically popup or suggest in the future.
I appreciate any guidance in this matter.

The iOS email app stores all email recipients in a list of previous recipients which cannot be turned off. The email address autofill feature when addressing an email pulls from contacts and from the list of previous recipients which can't be prevented. There is no option to clear the list of previous recipients - not at the present time anyway.
If you don't want any suggestions, select from contacts instead when addressing an email.

Can you please help me figure out my i phone and how to use the features

i need some help on figuring out my phone can you please help me figure out how to use my i phone and the blue tooth features to listen to music or how can a friend or a relative send me songs for me to listen to.....

To listen to music with a headset or earbuds via bluetooth requires a bluetooth stereo headset.
File transfer via bluetooth is not supported. A friend or relative can purchase music for you via the iTunes music store with an iTunes store gift card or by sending you the music gift via email from iTunes.

Can you please help me figure out what filter(s) to use to recreate this picture?

Hi Everyone!
I'm a student and not an expert in Photoshop. I'm trying to work over in After Effects using a Photoshop edited picture I was given (not separated in layers). However in order to give the image more movement I would like to recreate the picture, but have failed in figuring out which filters to use. Can you please help a student out? I would greatly appreciate it.!! (The first picture is the original, and the second one is the one I am trying to recreate) Thanks !

Thanks for sharing that piece of information. I was only aware of creating posterized effects in Illustrator, though the
re is a posterize filter in Photoshop too. I'm learning as I post so bear with me. I find that providing a helping hand can't hurt unless you're way off base. In this case I guess I should have provided my suggestion as an alternative rather than stating that it could only be best done in AI.
-markerline

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?

Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl

Can someone help me figure out why my MacBook Pro froze...

I just closed a usb drive window, and ejected the drive when my computer suddenly froze. I was running: Excel, Firefox, Speed Download, and Mail.
After about ten minutes or so of waiting I restarted my computer and found this log. Can you help me figure out what went wrong?
Oct 24 07:42:27 Alpha diskarbitrationd[39]: LaunchCFMApp [263]:30995 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: LaunchCFMApp [262]:29991 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: iTunes [260]:28715 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: coreaudiod [38]:28179 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: firefox-bin [219]:25667 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: Mail [202]:27651 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: Starry Night [199]:26627 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: Speed Download [197]:26123 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: LittleSnitchDaemon [182]:23555 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: Finder [179]:19459 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: SystemUIServer [178]:17923 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: SystemUIServer [178]:16403 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: Dock [176]:16899 not responding.
Oct 24 07:42:27 Alpha diskarbitrationd[39]: ATSServer [63]:12803 not responding.
Oct 24 07:51:57 localhost kernel[0]: hi mem tramps at 0xffe00000
Oct 24 07:51:57 localhost kernel[0]: PAE enabled
Oct 24 07:51:57 localhost kernel[0]: standard timeslicing quantum is 10000 us
Oct 24 07:51:57 localhost kernel[0]: vmpagebootstrap: 383643 free pages
Oct 24 07:51:57 localhost kernel[0]: migtable_maxdispl = 71
Oct 24 07:51:57 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Oct 24 07:51:57 localhost kernel[0]: 89 prelinked modules
Oct 24 07:51:57 localhost kernel[0]: ACPI CA 20060421
Oct 24 07:51:57 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Oct 24 07:51:57 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Oct 24 07:51:57 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Oct 24 07:51:57 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Oct 24 07:51:57 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Oct 24 07:51:57 localhost kernel[0]: using 7864 buffer headers and 4096 cluster IO buffer headers
Oct 24 07:51:57 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Oct 24 07:51:57 localhost kernel[0]: Started CPU 01
Oct 24 07:51:57 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Oct 24 07:51:57 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Oct 24 07:51:57 localhost kernel[0]: Security auditing service present
Oct 24 07:51:57 localhost kernel[0]: BSM auditing present
Oct 24 07:51:57 localhost kernel[0]: disabled
Oct 24 07:51:57 localhost kernel[0]: rooting via boot-uuid from /chosen: 831ACFE5-5EEF-4B22-8C04-C0A6524AADB7
Oct 24 07:51:57 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Oct 24 07:51:57 localhost kernel[0]: USB caused wake event (EHCI)
Oct 24 07:51:57 localhost kernel[0]: Debug driver registered: AppleUSBUHCI
Oct 24 07:51:57 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0016cbfffe4ccb7a; max speed s400.
Oct 24 07:51:57 localhost kernel[0]: CSRHIDTransitionDriver::probe: 0x0
Oct 24 07:51:57 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Oct 24 07:51:57 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/TOSHIBA MK8032GSX Media/IOGUIDPartitionScheme/Customer@2
Oct 24 07:51:57 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Oct 24 07:51:57 localhost kernel[0]: jnl: replay_journal: from: 4944384 to: 6034432 (joffset 0xa701000)
Oct 24 07:51:57 localhost kernel[0]: CSRHIDTransitionDriver::stop
Oct 24 07:51:57 localhost kernel[0]: HFS: Removed 1 orphaned unlinked files
Oct 24 07:51:57 localhost kernel[0]: USBF: 27.725 AppleUSBEHCI[0x2d6f000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
Oct 24 07:51:57 localhost kernel[0]: Jettisoning kernel linker.
Oct 24 07:51:57 localhost kernel[0]: Resetting IOCatalogue.
Oct 24 07:51:57 localhost kernel[0]: Matching service count = 0
Oct 24 07:51:57 localhost kernel[0]: Matching service count = 0
Oct 24 07:51:57 localhost kernel[0]: Matching service count = 0
Oct 24 07:51:57 localhost kernel[0]: Matching service count = 0
Oct 24 07:51:57 localhost kernel[0]: Matching service count = 0
Oct 24 07:51:57 localhost kernel[0]: Matching service count = 0
Oct 24 07:51:57 localhost kernel[0]: Previous Shutdown Cause: 3
Oct 24 07:51:57 localhost kernel[0]: mac 10.3 phy 6.1 radio 10.2
Oct 24 07:51:57 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Oct 24 07:51:57 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[33]: starting
Oct 24 07:51:57 localhost memberd[40]: memberd starting up
Oct 24 07:51:57 localhost lookupd[44]: lookupd (version 369.6) starting - Tue Oct 24 07:51:57 2006
Oct 24 07:51:57 localhost DirectoryService[45]: Launched version 2.1 (v353.2)
Oct 24 07:51:59 localhost configd[37]: com.apple.SystemConfiguration.DynamicPowerStep load failed
Oct 24 07:51:59 localhost kernel[0]: yukonosx: Ethernet address 00:16:cb:8a:7a:43
Oct 24 07:51:59 localhost diskarbitrationd[39]: disk0s2 hfs BABDE111-6071-3972-9C86-77812E4EB69A Macintosh HD /
Oct 24 07:51:59 localhost kernel[0]: AirPort_Athr5424: Ethernet address 00:14:51:ed:9a:ae
Oct 24 07:52:01 Alpha configd[37]: setting hostname to "Alpha.local"
Oct 24 07:52:02 Alpha lookupd[62]: lookupd (version 369.6) starting - Tue Oct 24 07:52:02 2006
Oct 24 07:52:02 Alpha /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Oct 24 07:52:03 Alpha kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled
Oct 24 07:52:03 Alpha loginwindow[64]: Login Window Started Security Agent
Oct 24 07:52:05 Alpha configd[37]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Oct 24 07:52:05 Alpha configd[37]: posting notification com.apple.system.config.network_change
Oct 24 07:52:05 Alpha lookupd[74]: lookupd (version 369.6) starting - Tue Oct 24 07:52:05 2006
Oct 24 07:52:07 Alpha mDNSResponder: Adding browse domain local.
aped[56]: mcxd[67] is running as the super-user. It is not possible for APE to affect this process in any manner whatsoever.
Oct 24 07:52:16 Alpha configd[37]: target=enable-network: disabled
Oct 24 07:52:47 Alpha kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Oct 24 07:52:48 Alpha kernel[0]: Registering For 802.11 Events
Oct 24 07:52:48 Alpha kernel[0]: [HCIController][setupHardware] AFH Is Supported
Oct 24 07:53:04 Alpha /Library/Application Support/LaCie/LaCie Backup/laciebackupd.app/Contents/MacOS/laciebackupd: laciebackupd could not load preferences for hotkeycode. Default : "s"
Oct 24 07:53:04 Alpha /Library/Application Support/LaCie/LaCie Backup/laciebackupd.app/Contents/MacOS/laciebackupd: laciebackupd could not load preferences for hotkeymodifier. Default : "controlKey"

Checked to see how much space is available ??
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
Check the startup disk lately?
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.

Help me smooth out my lighting.

Similar Messages

Maybe you are looking for