Help me spend $5,000

I posted an earlier message with some specific questions about how to configure my new Mac Pro, I thought this approach may work better.
I have $5,000 to spend (less would be better, but I could go a bit higher) on my new Mac Pro. I have a monitor and all other peripherals so I only need the computer.
I will use the computer mostly for editing and converting 1080p hi-def videos in imovie-09 and Final Cut Express, and for working with RAW file photos in Lightroom.
Given my budget how would you configure a Mac Pro to get the best speed for my situation?
Thanks for any and all advice.
Ken

Most of the times when people want 4 cheap low end cards like that, they mistakenly assume it is like having 4 cores instead of 1; CrossFire (SLI + CUDA + PhysX + GPGPU for Nvidia). Or that OpenCL will magically.... oh well...
Also, Apple warrants hard drives for one year, some "OEM" labeled drives and why I you should check when buying, but most SATA drives bought 3rd party will have 3 if not 5 yrs. And for a 1/3 the cost.
And on the memory front, and a lot of people buy and recommend OWC, I read on MacRumors some thought prices were going up. However sales of Windows 7 and memory demand aren't expected to hit until 2010, Intel Lynnfield boards won't really have much impact for months. Speculation...
But Apple vs OWC price for memory is as close as it gets.
http://eshop.macsales.com/shop/memory/Mac-Pro-Memory
Most of us have been recommending against the Apple Pro RAID, and another reason I wouldn't list it, and would argue against, and point to AMUG reviews and better offerings UNLESS you want it under Apple Care and support AND you have no need to install Windows natively (or other OS) (you can't).

Similar Messages

  • Help me spend 20k on VDI/Virtualization/all-in-one Cluster. What would you do?

    I want to buy hardware for VDI, virtualization and general cloud-services. (hardware will be colocated.) I need some help/advice on my current setup; I already have a (semi-succesfull) IT company, I have a customer base, advertising, cashflow, connections,
    etc. Fort starters I will be using one colo location, the DC's in my country are one of the most reliable in the world. And so is the infrastructure. My DC is one of the bigger ones, and I will either go with a private rack or with 2 seperate ones shared with
    my clients. (So I will be the only one placing hardware). There are no natural disasters or things like that, and DC's going down is extremely rare, and only happens to with startups/smaller shops. The 20.000$ is purely for hardware. I already decided to go
    with the Windows Server/Hyper-V platform, because of the new technologies that make "decent" low-budget setups possible. I cannot afford a SAN so I will need to use a different storage solution that utilizes the server2012r2 capabilities. I might
    have been a little unrealistic regarding my requirements, and they are more of goals anyway. Let my try again; My main goal will be virtualization and delivering VDI. (zero-clients) Second to that I would like to be able to deliver some cloud-services (backup,
    hosting, sharing, remote-desktop, etc.) to eventually offer a all-in-one package. I understand that with my budget I will not be able to do immediately be able to offer all these things at maximum performance and reliability. However, I should be able to lay
    a solid foundation for future investments, and probably even be able to offer VDI at a small scale? Some things to take into account before sharing your advice; These services will not be offered publicly. I will start with my current customerbase and work
    up from there. Most of my customers have minimum storage requirements. So I'm okay with making concessions on the amount of storage I can offer, as long as i can easily add more storage in the future. Most clients have very small bandwidth (8-60mb download)
    that's why I want to build my architecture around the zero-client model. That way I can at-least offer everyone of my clients my services. The downside of this is of course that i am very dependent on latency, which is why I think local SSD's (combined with
    HDD's) could be my answer. I am aware about the SSD lifespan, but I will be choosing only the drives that have proven to sustain some heavy-duty punishment. (Check THIS out, Hardcore SSD edurance test, 600TB so far, and not one has failed, not even TLC based).
    If each of the consumer grade SSD's in that test can sustain over halve a petabyte of non-stop writes without breaking a sweat, (except for the TLC maybe) and probably make it to a petabyte without dying, they will serve my cause just fine. Now I've made some
    decisions so far; The E3 does not offer enough ram for future expansion, so I will be going for E5 platform. Since DP MB's are not that much more expensive then the single ones, I will probably go with dual socket. Very flexible in terms of expansion, and
    not that more expensive compared to single socket. Now the big question for me at this point is; a Can i use the DP e5 nodes for storage as well, by adding local storage in every node, and use clustering for redundancy and sharing? What are the con's versus
    dedicated storage servers? Would it be better to use separate nodes just for storage? if so, why? This would cost me allot more money, and the all-in-one option would be allot more efficient. If i'm going the all-in-one route, I will be probably be going with
    10gb/e aswell, and put each node in at least a 2u form-factor for more drives, expansion possibilities, and ease of management. I am aware that I will have a smaller number of nodes in total, but because each node serves so many purposes i still think this
    would be the best route. Especially if you consider that eventually I will need to step up to 10gb/e anyway, and in the future I can always buy more nodes for extra redundancy. And I can start with nodes that are only halve-filled, and work up from there,
    and if one of the nodes does go down, I could temporarily move the CPU, RAM, etc. to the remaining nodes to give them some more power until i fix the problem with the node that has failed. So, that is my plan as of now, feel free to criticize me on anything
    you would do different. If something in my setup is impossible, or impractical, please say so, and tell me what would be a better alternative. Many thanks for the responses so far, Regards, Cloudbuilder

    Hi ,
    It is hard for me to answer this .
    I am not family with storage , but  I think shared storage is needed if you want to build a high availability cluster .
    BGDS
    Paul 

  • PLEASE HELP I LOST 10 000+ SONGS!!!!

    i just posted in another thread sorry i couldnt start a new one a second ago. anyway...
    my computer froze up & went styupid about 1/2 hr ago & when i restarted my ipod has been wiped!!! ive lost 10 000 songs! please tell me i can get them back!
    ive tried restarting the ipod with select/menu button, didnt do anything. whenn use the ipod itself it says i have no songs or videos but my photos have stayed on there. also when i try to restore it on the computer it says i have 10Gb left which leads me to believe the songs are still on there & something just went wrong. please help it will take me years to get all these songs some were from very rare albums.

    Most of your sources are illegal; friends, LimeWire, etc... Anyhow, try first updating your iPod's firmware; iPod Updater - Version 1.1.1. If that doesn't work, restore your iPod with that same updater. Restoring your iPod will erase all the files on your iPod. You'll have to put all the files on your iPod back on your computer. Check out the following programs...
    PodUtil
    YamiPod
    Both will rip files from your iPod, and place them in a specified folder on your computer.

  • Please help me spend money? Forgot security Q.&A.

    How the heck am I suppose to change my security question because I don't remember, if I HAVE to use my security question to prove its really me? I'm sooo mind f*xk'd right now >.<

    If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address set up then go to Express Lane  and select 'iTunes' from the list of 'products' in the middle of the screen.
    Then select 'iTunes Store', and on the next screen select 'Account Management'
    Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
    You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox).
    Or you could see if the second half of Kappy's reply in this thread helps : https://discussions.apple.com/message/20357006#20357006

  • RAM Croaking - Help me spend $!

    Ha!
    Thought that would get the collective attention!
    My PC3200 TCCD PQI Turbo Platinums are getting ready to bite the dust.
    After quite a few not so great OC attempts & generally unstable performance, I got my thumbs out & ran 'em through MemTest and....
    Instant errors!
    I guess you really can kill TCCD based 3200's by thrashing them @ 280mhz+ for 18 months.
    Long story short, I have determined that they are practically useless above 215 or thereabouts.
    Here's some criteria - Need some decent stuff that will OC well with my Neo4 Plat & Opty 165. 1GB kit preferred but will consider 2GB (2, 1GB modules so I can keep 1t timings) if the results are good enough - i.e., can get above 250 mhz @ 1:1.
    Don't try to "sell" me on flashing lights or any of that stuff - performance for $, not "bling".
    The "floor" is now open....!

    Think you made a wise choice 
    No other memory vendors support staff do this kinds of tests and share results (that I have seen) :
    Ram: OCZ PC4000 Platinum EB 2GB Kit (3-3-2-8)
    Bios Rev: 1.9 from MSI Taiwan Site.
    CPU: X2 4200+ Manchester
    Vid Card: XFX 7800GT
    Power Supply: GameXtream 700W (Beta)
    Ref RyderOCZ Cell Menu
    High Performance Mode.........................  Manual
    Aggressive Timing.............................  Disabled
    Dynamic Overclocking..........................  Disabled
    Adjust CPU FSB Frequency......................  250
    HT Frequency.............................. ....  4x
    HT Width.................................. ....  16 16
    CPU Spread Spectrum ..........................  Disabled
    SATA Spread Spectrum..........................  Disabled
    PCI-E Spread Spectrum.........................  enable
    PCI-E Clock.................................. .  100 MHz
    SSE/SSE2 Instructions.........................  enabled
    Cool 'N' Quiet................................  Disabled
    Adjust CPU Ratio..............................  x9 (to keep CPU @ Stock)
    Adjust CPU Vid................................  1.350V
    Extra CPU Voltage.............................  By CPU VID
    Memory Voltage................................  2.55V
    NF4 Voltage................................ ...  1.50V
    DRAM Configuration
    Timing Mode...................................  Manual
    Memclock Index Value (MHz)....................  200
    CAS Latency (Tcl).............................  3T
    Min RAS# active time (Tras)...................  8T
    RAS# to CAS# delay (Trcd).....................  3T
    Row precharge time (Trp)......................  2T
    Row to Row delay (Trrd).......................  3T
    Row Cycle time (Trc)..........................  10T
    Row refresh cyc time (Trfc)...................  16T
    Read to Write delay (Trwt)....................  3T
    Write recovery time (Twr).....................  3T (which gives 2)
    Write to Read delay (Twtr)....................  Auto (anything else won't boot)
    Refresh Period (Tref).........................  1x3120 Cycles
    User Config Mode..............................  Manual
    Bottom of 32-Bit[31:24] IO....................  D0
    1T/2T Memory Timing...........................  1T
    Read Preamble Value...........................  6ns
    Async Latency Value...........................  6ns (This results in 8ns)
    S/W Memory Hole Remapping.....................  Disabled
    H/W Memory Hole Remapping.....................  Disabled
    MTRR Mapping Mode.............................  Continuous

  • To buy a Macbook? Help me decide, please.

    Hi Guys,
    My 12" PowerBook G4 is getting a little long in the tooth, so I'm in the market for an upgrade. My choices are either the 15" MBP or the high-end white Macbook. The deciding factor is the dedicated video card in the MBP.
    My question is about the performance of the Macbook with a 23" Apple Cinema Display. You see, I have a friend with a first-generation Macbook with 1GB of RAM and she recently hooked it up to my display in order to watch a quicktime movie. It was a horrible experience. The movie played fine, but if you tried to drag the window around or tried to interact with the OS, everything lagged. In short, the integrated graphics were inept. Way too underpowered to use with the external display.
    I realize that the new Macbooks have updated graphics. Those of you that have new MBs and external displays, how is the performance? I routinely have 3 Creative Suite apps up at once along with safari, pages, mail, etc. I need to be able to use all these apps at once, switching between them flawlessly on a 23" display. I will not tolerate any lag or hesitation. (Dragging CS3 windows around must be smooth, expose must be instant and smooth, etc).
    If I buy the Macbook, it will have 4GB of RAM, so I'm especially interested in the experience of those who have maxed out their memory. Thanks very much!
    -Bryan

    Yea, that's the same conclusion I've reached. The only downside is that I'm currently doing a massive publishing project that I could really use the power of a new MBP for. But with Montevina coming out in five months, it's just dumb to spend $3,000 at the moment.
    Santa Rosa is not bad and the current MBPs are no slouches, but the new Montevina chipset with Penryn Core 2 Duos will really up the ante. Plus, Montevina brings built-in support for DisplayPort and it will be roughly 20% smaller, which means we might see a redesigned MBP at WWDC in June.
    So the wait continues! Thanks for you help, guys.

  • Help.. best way to share FC projects between 4 computers

    Hi There,
    We are a small video production company and we use four computers to edit, one Mac Pro, two iMacs and a Macbook Pro.
    The problem we have is that we often need to move the projects from one computer to another, so different members of the team can pick up on a project on a different computer... we need a solution to be able to share the projects so that they are all held on a central storage device, and then we can edit them all off there.
    The problem is that we work in uncompressed 1080p format, so file sizes are high.
    We dont currently have any kind of network set up, and have to upload it onto a hard drive then download it to the next computer, which all takes hours to do!
    What are the different options that we have with regards to networks, speed, and central storage devices?
    I have read a lot on the apple website about Xsan, Xserve and Final Cut Server, but don't really understand how it all works and realistically howe much approx. it will cost to implement something like this in our company?
    any help or advice is greatly appreciated about how you share projects and store data centrally.
    Thanks
    Tom

    Your question is very loaded! You really need professional integration support to properly arrive at an answer, but I'll attempt to cover the highlights.
    I'll skip the part where we might consider not adopting Xsan and Final Cut Server. For collaborative workflows like yours it is an excellent, if relatively expensive option. I'll also skip the part where I explore your use of uncompressed 1080p in a world with ProRes 422 HQ; I'm sure you have your reasons (though I'm puzzled as to how you can edit that format on an iMac or MacBook and not drop frames constantly).
    First, with Xsan, Mac Pros are your only choice for workstations. Xsan requires a fibrechannel connection to the client and that is only possible on a Mac Pro tower with a fibrechannel card installed. Yes, many have had some success "resharing" their Xsan over AFP or SMB or NFS, but for uncompressed 1080 that is essentially impossible. Each member computer needs a £491 fibrechannel card.
    Xsan requires a dedicated computer to act as the "boss" of the SAN called a metadata controller. Many Xsan deployment shave two of them for redundancy (for the sake of thrift we'll only look at one for you). An Xserve or Mac Pro will work, so for the sake of argument we'll repurpose your existing Mac Pro for MDC duty.
    So you will be replacing your four edit stations with £3,000+ Mac Pros (depending on how many goodies you put in them). You'll also need some monitors for them since they are not built-in as with your existing Macs. Let's call that another £3,000 to be safe. We'll avoid the AJA or Decklink cards, HD broadcast monitors, and other accessories since they are not really part of the SAN-scape.
    You will also need a copy of Xsan software for each member computer, including the metadata controller(s) at £816 each.
    You will also need a second gigabit switch for Xsan's filesystem metadata, you should be able to get one for around £100. This switch must not be shared with other network traffic!
    Of course there is the RAID storage. Apple sells Promise RAIDs, and a 32TB chassis will store about 50 hours of your footage. Off the top of my head I'm not sure how many streams of that it will be able to support. Figure on needing at least two of these I reckon. £15,000 for the first one and £13,000 for the expansion chassis.
    Lastly, you need a fibrechannel switch. The popular Qlogic 5600 with 8 ports active will cost £2,200.
    And since you posted here, clearly you want Final Cut Server. Again, an Xserve or Mac Pro will do, and a properly spec'd one will cost about £7,000 for the hardware and another £816 for the Final Cut Server software itself.
    You're already over £60,000 and you still need expert help setting it up, you'll want UPS batteries to keep the SAN stable, and we haven't touched on backing it all up.
    You could easily spend £100,000 before you are done. It might be an intimidating figure, but that's the ante for this game.

  • Need help finding the best Mac for gf

    hi I need help finding the best desktop. I am looking to buy MAC for gf.
    she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
    She has a 2009 Apple computer I want to upgrade her to a new one
    I Dont know much when it comes to specs. She edits tons of videos and pictures.
    what's recommended for a video/photo editor that's good in performance ?

    Pro consumer might go with iMac even.
    Final Cut Pro latest benefits from dual AMD graphics.
    Video is one animal, graphics a much different.
    Great site full of performance, buying and configuration ideas:
    MacPerformance Go to the main topics
    I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
    Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
    Barefeats
    Rumors Pro
    Visit the forum for FCP-X would be a place to start.
    Final Cut Pro X

  • Chargesmart and Marriot Rewards Chase Card 70,000 points

    Hi everyone -- I got approved for the Marriot Rewards card and I am totally happy because I will receive 70,000 reward poiints after I spend $2,000 on the card within 90 days. I have used Chargesmart to pay my car loan and mortgage with a Capital One credit card with no cash advance fee. I also receive points/cash back on my Venture and Quicksilver cards. I have heard Chase can be a picky when it comes to using third party companies to help with my spending. To get my 70k points, I want to use my new Chase Marriot card. Does anyone know or have had experience with Chase charging me a cash advance fee if I use Chargesmart or similar service? I don't want to use Marriot if Chase gives me problems. By the way, this is my first approved Chase card. Thank you.

    balboa wrote:
    Hi everyone -- I got approved for the Marriot Rewards card and I am totally happy because I will receive 70,000 reward poiints after I spend $2,000 on the card within 90 days. I have used Chargesmart to pay my car loan and mortgage with a Capital One credit card with no cash advance fee. I also receive points/cash back on my Venture and Quicksilver cards. I have heard Chase can be a picky when it comes to using third party companies to help with my spending. To get my 70k points, I want to use my new Chase Marriot card. Does anyone know or have had experience with Chase charging me a cash advance fee if I use Chargesmart or similar service? I don't want to use Marriot if Chase gives me problems. By the way, this is my first approved Chase card. Thank you.Did you ever use chargesmart? how did it go? I just use my Arrival and did a small charge of $20 towards my mortgage to see how it is taken. If it works well and i get my points and not treated as cash advance, i i will do the full payment due on 8/1.

  • Help needed for THE decision

    Hi everyone ☺
    I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
    Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
    So, here’s what I came up with:
    a) getting logic pro studio 8 and apogee duet
    b) getting pro tools m-powered and mbox 2
    c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
    Now, the questions are:
    if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
    In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
    I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
    I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
    Neptune

    Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
    now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

  • Javascript error. Please help!

    I contacted Adobe  support today and they said to get on these forums as they cant help  with coding errors.
    When i try to insert a Record I  get the following error:
    while executing onLoad in InsertRecord.htm, the  following JavaScript error(s) occurred:
    At line 665 of file  "C:\Program Files\Adobe  DreamweaverCS4\Configaration\ServerBehaviours\PHP_MySQL\InsertRecord.js":
    name   has no properties
    Line 655
          if (columnName.toUpperCase() ==  name.toUpperCase())
    Im running Win 7 64bit
    I contacted Adobe  support today and they said to get on these forums as they cant help  with coding errors.
    I have formatted my Pc and reinstalled and the same error  comes up. If I try to edit and existing insert record it works fine,  when I create a new page and then try to add a new insert recordset i  get this erro again.
    i have since reinstalled Windows & 32Bit to see if  that helped, nope. I have installed no extensions its a clean install.
    Any help  after spending a small fortune on this software.

    You can try this simple fix -
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "sarsie64" <[email protected]> wrote in
    message
    news:e9dld7$2hq$[email protected]..
    > um...
    > I have Dreamweaver MX 2004 and suddenly, when I tried to
    open a file, it
    > came
    > up with this error message
    > "while executing DWMenu_File_Open command in menus.xml,
    the following
    > JavaScript error(s) occured:
    > The dreamweaver.createDocument() and
    document.openDocument() functions can
    > only be called by a command or property inspector, not
    an object or
    > behaviour"
    > this is slightly worring. I was only trying to open a
    ordinary HTML file
    > and
    > it has another error message for when you try and open
    something from File
    > >
    > Open Recent as well... please someone help.. Dreamweaver
    is my LIFE!!!
    >

  • Help-mandt declaration?

    HI All,
    I decalred constant like this.
    constants:  help-mandt(3) VALUE '000',
    But it is giving error as below.
    In Unicode programs, the "-" character cannot appear in names, as it does here in the name "HELP-MANDT".
    How shall i declare it in ECC 6.0 (Unicode)

    hi..pravin..
    even iam using ecc.6.0.
    here iam not getting any warning.
    pls paste ur code here to check.
    As above said, pls read the rules before declaring any varb in ABAP.
    regards,
    Padma,
    for reference:
    Local Data Types in Programs
    All ABAP programs can define their own data types. Within a program, procedures [Page 449]
    can also define local types.
    You define local data types in a program using the
    TYPES <t> ... [TYPE <type>|LIKE <obj>] ...
    statement. The type name <t> may be up to 30 characters long. You can use any letters, digits,
    and the underscore character. Do not create a name consisting entirely of numeric characters.
    You cannot use the special characters + . , : ( ) - < >. Other special characters are reserved for
    internal use. You cannot use the names of the predefined ABAP types (C, D, F, I, N, P, T, X,
    STRING, XSTRING) or the name of the generic type TABLE. You should not use names that are
    the same as an ABAP keyword or addition. You should:
      Use names that explain the meaning of the type without the need for further comments
      Use the underscore character to separate compound words
      Always use a letter as the first character of a variable name.
    You declare local data types in a program either by referring to an existing data type or
    constructing a new type.
    An existing type can be
      A predefined ABAP type to which you refer using the TYPE addition
      An existing local type in the program to which you refer using the TYPE addition
      The data type of a local object in the program to which you refer using the LIKE addition
      A data type in the ABAP Dictionary to which you refer using the TYPE addition. To ensure
    compatibility with earlier releases, it is still possible to use the LIKE addition to refer to
    database tables and flat structures in the ABAP Dictionary. However, you should use the
    TYPE addition in new programs.
    Known types must be visible [Page 112] at the point where you define the new type. If the
    existing type is generic, you can use further additions to set the attributes of type <t> that are still
    undefined.

  • Javascript error with insert record. Please help!

    I  contacted Adobe  support today and they said to get on these forums as  they cant help  with coding errors.
    When i try to  insert a Record I  get the following error:
    while executing onLoad in  InsertRecord.htm, the  following JavaScript error(s) occurred:
    At  line 665 of file  "C:\Program Files\Adobe   DreamweaverCS4\Configaration\ServerBehaviours\PHP_MySQL\InsertRecord.js":
    name    has no properties
    Line 655
          if (columnName.toUpperCase() ==   name.toUpperCase())
    Im running Win 7 64bit
    I contacted  Adobe  support today and they said to get on these forums as they cant  help  with coding errors.
    I have formatted my Pc and reinstalled and the  same error  comes up. If I try to edit and existing insert record it  works fine,  when I create a new page and then try to add a new insert  recordset i  get this erro again.
    i have since reinstalled Windows & 32Bit  to see if  that helped, nope. I have installed no extensions its a  clean install.
    Any  help  after spending a small fortune on this software.

    I think you are trying to run the program but you don't have the required class POP3Session.class or it's .java file which you can compile.
    Another example for pop3 and smtp is on the following link..check if it helps you..
    http://www.cs.umu.se/~hed/java/ch11.htm

  • Need help finding the oam edge widget

    Where can I get my hands on the edge animate oam widget?
    Under insert media i don't have an animate edge option...
    I searched in the widget browser in dreamweaver but nothing came up.

    Pro consumer might go with iMac even.
    Final Cut Pro latest benefits from dual AMD graphics.
    Video is one animal, graphics a much different.
    Great site full of performance, buying and configuration ideas:
    MacPerformance Go to the main topics
    I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
    Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
    Barefeats
    Rumors Pro
    Visit the forum for FCP-X would be a place to start.
    Final Cut Pro X

  • Iphoto rebuilding error. Cannot update please help!!!!!!!

    my iphoto is updating and it says that it has to rebuild. But rebuilding is taking longer than an hour and pretty much shuts down my whole computer! I tried rebuilding again and it froze my computer which then turned black
    HELP!!!

    Old Toad -
    Again, I thank you for helping find my 8,000 photos - that was quite a scare.
    Since you seem so knowlegable about iPhoto Library Manager let me ask this follow-up question.
    It APPEARS my albums are gone (I can live with this) and in the space on the left where my albums would normally appear there is a list of events.  These event folders are all empty.  Should I delete these empty folders?  I have not tried to do so.
    I am simply curious as to whether there are additional tools or steps I can do to further recover things as they previously were?
    BIG Thanks Again,
    Russell

Maybe you are looking for

  • Referencing invoice vs. sales order in credit memo

    Can someone please explain to me why one would create a credit memo referencing an invoice as opposed to a sales order? What would the business scenario be for this case? Thanks,

  • Can't get my hp printer to work wireless with my iMac

    I am so computer illiterate, it's not funny. I am really getting frustrated with trying to get my new HP Photosart all-in-one c7820 to work with my new iMac. This computer is awesome, but I am so used to pc's because that's all I have ever known. I c

  • Error in MSS iViews - Urgent

    Hello All, I've imported the MSS BP 60.1.5 (Based on Java) into the Portal Successfully. After creating a System Object 'SAP_R3_HumanResources' i'm trying to run the iviews however am getting a message "Could not connect to the R/3 System". I checked

  • Reduce E1EDKA1 in IDoc regarding partner type

    Hi, im looking for an "non SAP XI" way to reduce the E1EDKA1 in the ORDERS IDoc. I want the following: IF E1EDKA1 PARVW = AG then the segment shouldn´t be reduced. IF E1EDKA1 PARVW = WE then the segment shouldn´t be reduced. IF E1EDKA1 PARVW = ZZ the

  • HTTP POST works on browser but not socketically

    I can post info using a simple html but i cant post using sockets.. InetAddress addr = InetAddress.getByName(hostname);             Socket socket = new Socket(addr, port);             String path = postpath;             BufferedWriter wr = new Buffer