Help me to format my phone n72

Hi
I receive this alerte when i like to format my phone“"please note that your mobile service provider, operator or carrier may not have approved the latest nokia device firmware available"

Please you can do these code.
for Full Format you Handset = *#7370#
handset software reset = *#7780#
lock code = 12345 orginal code
take other formating tips is first is press 3 and then press * and phone receive sin botton hold on strat you phone power botton.
ok
enjoy these tips happy
Hi This Pervaiz Ali IT.Assistan

Similar Messages

  • How to format a nokia n72 phone plz urgent help

    i want to format my nokia n72 phone can anyone help me

    Please you can do these code.
    for Full Format you Handset = *#7370#
    handset software reset = *#7780#
    lock code = 12345 orginal code
    take other formating tips is first is press 3 and then press * and phone receive sin botton hold on strat you phone power botton.
    ok
    enjoy these tips happy
    Hi This Pervaiz Ali IT.Assistan

  • I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

    I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

    Hello Huss87bash,
    This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • I have purchased Iphn 4s recently and since then i m facing issues around Battery back up, Software and even issue around hard drive. I have visited I store where they formatted my phone but nothing positive has happened. How do i escalate?

    I have purchased I phone 4S on April 30th 2014. Since I bought this phone, I have been facing issues such as Battery Back up, Software and Hardware issue and hang issue. I had visited I store last month where they just formatted my phone. The issues were not taken care completely, even till now the issues are on. I would appreciate if you could help me with the right escalation desk for raising my voice to Apple team.
    I have been using apple product since long now and never face such dissatisfaction in past
    Regards,
    GB

    Hello, when you are having an error on your iPhone and going to the Apple store to get it taken care of, make sure you speak up and provide as much detail as you can. The first iPad Mini I had bought had errors on it, and I didn't speak up and provide further details on my issue.
    Hope your issue gets resolved soon!
    -RazorOrange

  • Format a Phone number using StringFormat in xaml

    Hello,
    I am looking to format a Phone Number in xaml. The Phone Number comes as a string to me.
    <Label Content="{Binding SelectedPatientPolicy.CarrierPhoneNumber}" Grid.Row="5" Grid.Column="1" Grid.ColumnSpan="2" Style="{StaticResource FieldValueStyle}"/>
    Here I want to apply StringFormat as "(###) ###-####".
    Please let me know how can i achieve this.
    Thanks,
    Abdi

    You cannot apply a StringFormat on a string value in XAML. But you could use a converter class:
    namespace WpfApplication24_4
    public class StringToPhoneConverter : IValueConverter
    public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)
    string s = value as string;
    if (string.IsNullOrEmpty(s) || s.Length < 10)
    return value;
    return string.Format("({0}) {1}-{2}", s.Substring(0,3), s.Substring(3,3), s.Substring(6,4)); //"(###) ###-####".
    public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)
    throw new NotImplementedException();
    <Window x:Class="WpfApplication24_4.Window5"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:local="clr-namespace:WpfApplication24_4"
    Title="Window5" Height="300" Width="300">
    <Window.Resources>
    <local:StringToPhoneConverter x:Key="conv"/>
    </Window.Resources>
    <Grid>
    <Label Content="{Binding SelectedPatientPolicy.CarrierPhoneNumber, Converter={StaticResource conv}}" Grid.Row="5" Grid.Column="1" Grid.ColumnSpan="2" Style="{StaticResource FieldValueStyle}"/>
    </Grid>
    </Window>
    The other option is to format the value of the source property directly. You cannot do this in the XAML markup anyway.
    Please remember to close your threads by marking helpful posts as answer and please start a new thread if you have a new question.

  • I have an iphone 4 and it won't let me download nothing! Help me I need my phone apps!

    I have an iphone 4 and it won't let me download nothing! Help me I need my phone apps!

    Vague.
    Please explain

  • HT4623 Could you please help me to unlock my phone

    I have an iPhone 4 32GB (black)and it's already out of contract so I think it's eligible to unlock as well.
    Could you please help me to unlock my phone so I can use it with other carriers in other countries. I'll appreciate for your response.
    My IMEI numbers is: 012427009166282
    My hardware serial numbers is: 86025A71A4T
    Please let me know if you could help me out. Thanks again.

    ONLY the carrier to which it is locked can unlock it.  no one else.
    Contact that carrier and ask if they offer this service and if you qualify
    You should not leave your iphone information on a public forum.

  • TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current  ios 6.0.1. plese send me some thing that is

    was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current  ios 6.0.1. plese send me some thing that is useful

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • Dear Apple,  I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone. Could you please help me to unlock my phone so I can use it with o

    Dear Apple,
    I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone.
    Could you please help me to unlock my phone so I can use it with other carrier Sims. I would appreciate it.
    Please let me know if you could help me out. Thanks again.
    <Edited by Host>

    Like ckuan said, Apple does not unlock iPhone; your carrier does, provided that the carrier offers this service.
    Unfortunately, SoftBank does not offer authorized unlocking of iPhone.
    Your best option is to sell this phone and buy another iPhone from the carrier of your choice or better buy a factory unlocked iPhone so you would be able to use it with any compatible GSM carrier around the world.

  • Where to add html format for phone # so it dials on touch in List View

    Hi,
    In Apex 4.2 Jquery mobile list view how can you apply html format for the phone# field to make it dial with a touch.  For example, I see how to do a list view of the 'DEMO_CUSTOMER' sample data, but I cannot figure out how to format the phone # fields so that they will dial on touch.  I know the HTML tags to use and I know how to use it in a standard report, but I can't figure out list view.
    Thanks,
    Pat

    Hi, Vincent,
    Thanks for the quick response!  I found the Settings and subtype but when I set to phone it does not make the phone # dial-able on touch.
    In a report I can set : Column Formatting --> HTML expression to:
    <a href="tel:#PHONE_NUMBER#">#PHONE_NUMBER#</a>
    The phone # will then dial out when touched on smartphone.  List view does not seem to allow formatting the column with such a format.  Seems strange that Jquery mobile would not have this type of formatting 'built in' so any subtype defined as phone would automatically be dialed on touch.
    Pat

  • Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

    Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

    The battery capacity on a 5S is a little better but be sure to read the special notes on conserving battery power on these phones.   Here are two in particular.
    17 Tips to Extend iPhone Battery Life (Updated for iOS 7)
    How to improve iPhone battery life, what to do if your iPhone battery is running low - How to - Macworld UK
    Regards,  71

  • I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    I forgot the code for my iPhone to access the Home screen I do , please help me
    try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

    Hello polo-angulo,
    I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
    Resolve iOS update and restore errors in iTunes - Apple Support
    Get help with iOS update and restore errors - Apple Support
    Sincerely,
    - Brenden

  • Standardizing the format of phone numbers in contacts

    I am looking for a script or app that will quickly standardize the format of phone numbers in my contacts.  Any suggestions?

    Before you sync your iPhone the next time, activate the option "sync addressbook" and "replace all Contacts on iPhone". The next sync will replace your contact info on your phone. From that point on all contact infos will be the same on your mac and and your phone. And changes or new infos will also be seen on both systems.
    Hope this helps

  • I need help choosing a new Palm phone.

    No device
    I'm trying to get a new Palm phone but the HP website has no useful information.  I would appreciate anyone's help with choosing a new phone to replace my Palm Centro. I want to continue using the Palm because it sounds like iphones and other smart phones don't have a way to back up their contents and they all require internet.
    Here are some of the qualities I'd like to have:
    1. No internet requirement but able to use wifi.
    2. ptunes or similar mp3 app that syncs with Rhapsody.
    Thanks,
    Mario

    Hello mars_d11, I regret to inform you Palm Inc. ceased to exist years ago.
    There are no more PalmOS phones in existence. You do have the option of searching for another Centro on the internet...p
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Formating a phone number based on locale

    How can I format a phone number based on the region setting? E.g. phone numbers will be formated as (xxx) xxx-xxxx if the region is set to US. And formatted otherwise if the region is set to some other country.

    also want to know

Maybe you are looking for